Quick Launch Panel Not Working on GT70 2PC

I have had the notebook for a week. The quick launch panel worked out of the box but after the machine ran through all of its updates it has not worked since.
I read the older posts on this problem related to updating BIOS and EC as wall as the restart following pulling the battery out to initiate a reflash of the EC but have not had any success. I have ran the latest version of MSI Live Update 6 and installed all the recommended updates. Here is the latest state of the notebook.
BIOS E1763IMS.517
EC 1763EMS1.716
SCM 13.014.06109
Steel Series Engine driver 3.0.3.8
I would appreciate any help.

Hello Glenn,
The EC version difference between my sample and your laptop is on the controller of the quick launch panel. There seems two types of controllers used in the laptop. So maybe the Live Update you installed mistakenly overwrite your original EC from 516 to 716 and made you unable to use the quick launch panel.
All you need to do now is to manually flash the 516 version of EC.
As shown in the picture, there're two versions:
516: Execute the Autoflash.exe in the "352x" folder. (Need to run as Administrator too.)
716: Execute the Autoflash.exe in the "353x" folder. (Need to run as Administrator too.)
Since you are using 716 now and the quick launch panel didn't work, it probably works after you flash the 516.
You can execute the Autoflash in the "352x" folder to try it.

Similar Messages

Dv7-1130us - Quick Launch buttons not working - though they light up correctly

I'm trying to enable wifi, though the quick launch buttons are no longer working. They used to work, though I've had my laptop repaired at the service center (to replace the keyboard), and I also immediately upgraded to windows 7 once my laptop was returned.
I've done a hard reset, upgraded the bios, and upgraded the quick launch button drivers, though nothing is working. When windows boots, the wifi image on the quick launch bar transitions correctly as it has always done (blue to orange - since I had I usually had it disabled before I sent it in for repair and upgraded).
Is there a way I can enable the wifi card without having to use the quick launch buttons? The wifi card has always functioned correctly when it was enabled, and it's working properly according to the device manager. I just need to either find a way to enable it without using the quick action bar, or get the quick action bar working.
Any suggestions? I'd rather not send it back in for repair, it's a lengthy process.
This question was solved.
View Solution.

Uninstall the current HP Wireless Asistant and reboot.
Try installing newer version of HP Wireless Assistant sp49018.exe
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Quick Launch buttons not working on Window 8.1

I have installed window 8.1 but quick launch buttons, which used to work with combination of FN key, for example fn+F3 key for brightness, fn+F8 for volume, fn+F6 key to lock the computer etc are not working. What is the solution?

Farhan_Raza
I have available a pretty extensive list and I cannot find a Quick Launch Driver for Windows 8.1. Might be one; I don't see it.
I use a completely different arrangement of Custom Toolbars from what most people use so I am not at all sure what constitutes a Quick Launch.
I did find the following that may be close to what you seek:
How to enable Quick Launch in Windows 8.1
=========================================================================
Possible Option - HP Launch Box Manager
Windows 8.1 provides the following -- this program MIGHT install on your computer and it might run on your computer. It is not rated for your system. You may try it if you like. Windows will tell you if the program is not appropriate for your system.
For Windows 8.1, you might be able to use the HP Launch Box Manager:
Close running programs, browsers, and games
Next:
Create a Restore Point:
Create a Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
Download / Save:
sp63808 HP Launch Box V1.1.5
Double Click or Right-Click on the file and install as Admin...
The application installs in seconds and then disappears.
Windows key (opens the Start Screen) > type anywhere, the word: Launch Box >
Click to start the Launch Box Manager
The Launch Box Manager will start on your Desktop and offer a list of available applications from which you can choose eight applications for your Launch Box menu.
Once set up, the Launch Box Manager sits in your Task Bar.
Right-Click to Edit the Manager OR Left Click to Open and access the items in your Application List.
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Volume and Media Quick launch buttons not working Pavilion DV4 1100EA

Hi,
I recently had to replace my hard disk and reinstall windows 7 (32bit) from scratch. I have loaded HP Quick launch driver V6.50.12.1 (2009-12-09, latetest on website) but have the following issues:
Media Quick Launch button does nothing (despite media programs been installed)
Volume slider button does not provide the previous clicking and volume bar on the screen when being used. (I have checked that the sound is enabled in the Bios).
I have uninstalled the Driver and reinstalled it several times, but it does not fix the issue.
Any suggestions would be appreciated.
Regards,
Dave

Hi,
QuickPlay will not work under Windows 7 ( it was the option for Vista ) and was replaced by the MediaSmart software option.
If the media button you refer to has a Q rather than an M, there is an alteration you can make to the registry that will allow you to launch SmartMenu from this button.
The key is located at:
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Hewlett-Packard\HP Quick Launch Buttons
Modify the path for:
QAction
To:
C:\Program Files\Hewlett-Packard\HP MediaSmart\SmartMenu.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Quick Launch Buttons not working on dv7-3085dx

Hello HP world.
I am having a problem that I cant fix it myself and it is driving me crazy.
I am very techy and usually always find a solution to any problem but this one got both of my feet locked.
My Quick Launch Buttons on my DV7-3085dx Running Win7 64-bit.
Are not working. They were working fine since forever until 2 weeks ago I noticed the mute and wireless buttons remained red non stop? and they were not functionable. Almost as if they lost connection to the notebook.
This is what i have tried so far:
- Hard reset (after i did this the red mute button and wireless went off, now only volume and media controls are on, still useless)
- Updating the QuickLaunch Buttons Driver
- Updating the BIOS
- Reinstalling MediaSmart
- New Chipset Driver
- Installing latest IDT driver
- probably other drivers and such which i cant remember but its been over a week that i have been reading online and it came down to this.
I surrender!
Please help me.
Thank you in advance.
Fitim

Fitim wrote:
So i just finished with the System recovery and no luck
The buttons are still not functioning. I just get the audio and player controls lid up but thats it.
They dont work and are useless.
HELP
If they're not working after performing the System Recovery then it's a hardware problem. Could a loose or damaged cable or circuit board.

[Solved] Quick launch buttons not working

So I bought the GT60 2OC 3k IPS edition around 3 months ago and it's been working more or less perfectly. However today I haven't been able to use any of the quick launch buttons, they don't even light up when clicked on. I tried reinstalling SCM multiple times but nothing changed. Is there any easy fix solution to this problem?

I just read about the EC reset and tried it out. It worked! Sorry for the needless thread, although I'd still like to thank the community and moderators of these forums that provide some useful information

Quick Launch & audio not working

HELP!! I am running the new Wibndows & and it is so awesome!! I have the Dv 7- 1129wm and my audio and quick launch quit working!! anyone have any suggestions? Thanks,
Smilesgently71

Hi,
Write down Your p/n number which is under Your computer and looks like this.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Anchor links to accordion panels not working properly across browsers

Hi everyone,
I need some help to figure out why my anchor links to specific accordion panels on another page are not working properly across browsers.
I have a Map page which has tooltips on mouseover on the site markers. 15 of the tooltips have "Click here for information" anchor links (although only 14 are currently linked) which, in theory, would take you to the Nurseries page where the specified accordion panel would be opened with the nursery entry appearing at the top of the new browser window.
Here are the links to the Map page and Nurseries page, respectively:
www.alegriadesignstudio.com/RFRI/map_v6.html
www.alegriadesignstudio.com/RFRI/nurseries_v6.html
I've tested the anchor links on IE, Firefox, Google Chrome, and Safari, and have received varying results. In most cases, the anchor links worked perfectly on two of the browsers, while on the other browsers, the correct accordion panel is opened but the nursery entry does not appear at the top of the new browser window. Anchor links using Safari and Google Chrome fared better (10 out of 14 links worked properly, and 8/14, respectively), whereas when using Firefox and IE, only 3 anchor links worked properly. The target audience for this website will be using IE and Firefox, so I would appreciate any help to figure out how to tweak the code so that the most, if not all, anchor links work properly on these two browsers in particular.
Here's an anchor link which worked perfectly in IE, GC, and Safari, but in FF, the entry did not appear at the top of the new browser window.
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem
http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem [To access the anchor link on the Map page, mouseover the third green dot from the top of the map (Tooltip--Location: Mangatarem) and then click on "Click here for information."]
Here's a sample anchor link in which the entry did not appear at the top of the new browser window in any of the 4 browsers:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel [To access the anchor link on the Map page, go to "Mindanao" at the bottom of the map and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Brgys. Amabel, Bongolanon, Imamaling, & Manobisa; Magpet; North Cotabato) and then click on "Click here for information."]
Here's a sample anchor link in which the anchor link worked properly in GC and Safari, but the entry didn't appear at the top of the browser window in IE and FF:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar [To access the anchor link on the Map page, go to the small island north and a bit west of "Mindanao" which is called "Bohol" and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Bilar; Bohol) and then click on the first "Click here for information."]
Many thanks in advance for your assistance!
Joy

Hi everyone,
I'm still trying to figure out how to resolve the problem of anchor links to accordion panels not working properly across browsers (see original post for details). I would greatly appreciate any suggestions on how to resolve the problem.
Many thanks in advance.
Joy

Why do my panels not work in CC 2014

I made my own panels in CC but they don't work in CC 2014. I miss them.

It's the latter. Thank you for answering my question.
Op 21 jun. 2014, om 09:42 heeft Trevor Dennis <[email protected]> het volgende geschreven:
Why do my panels not work in CC 2014
created by Trevor Dennis in Photoshop General Discussion - View the full discussion
Are you talking about a custom workspace, or actual panels made with Configurator? If the former, then go Preferences > Sync settings. If the latter, then those Flash panels no longer work in CC 2014. Check out any of the multiple threads about Extensions being greyed out.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6481073#6481073
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

"Photos" option button in icloud control panel not working

Photos option button in icloud control panel not working...it is not greyed out, and it is ticked, but clicking on it has no effect. Windows 8.

luvsack wrote:
DOES ANYBODY RESPOND TO THESE QUESTIONS EVER? I HAVE THE SAME PROBLEM AND CAN FIND NO ANSWER ANYWHERE! ANSWER THE **** QUESTION PLEASE!!!!!!!!!!!!!!!!!!!!!!!
Windows 7 64
Start your own thread, and please stop shouting, it is hard to read, and who wants that.

Quick time does not work on win7. What do I do?

quick time does not work on win7. What do I do?

Mine works fine with both my iPad and my iPod Touch. Been using it for two years. I recently replaced it with an Apple TV.

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

Sharepoint 2013 list view quick edit does not work with out remote API permissions

sharepoint 2013 list view quick edit does not work with out remote API permissions.
When I give Use Remote Interfaces - Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site it works which is not an ideal situation..
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

This is true. If you use Fiddler to watch the requests from the list view quick edit you can see CSOM calls. For example when changing a value in a cell, when you tab out you will see the SetFieldValue and Update method calls on the list item.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

Quick launch panel modification (Nokia 5730 Xpress...

Hi all,
Now I have 5730 Xpress in addition to my N96. As I don't have Facebook account and use clock for alarms a lot, I would like to do this quick launch panel a bit similar to N96. For example, I want to change Facebook link to Bluetooth. In manual there is no any information I can do that. Phone itself is very nice, but quick launch possibilities are quite weird.
All help is welcomed!
Solved!
Go to Solution.

Why won't you go Settings > Settings > General > Personalisation > Standby Mode > Shortcuts > scroll to Facebook shortcut and change it to the clock?
It's actually simpler than you thought. Hope this helped.

[Solved] GT70 fast access touch panel not working

Good Morning/afternoon/evening
I did terrible mistake by reinitializing my SSD drive which caused me to lose the OEM partitions, my Laptop used to take 3 secs to boot but now it takes up to 6 secs.
back to my main issue,
1- the upper touch panel is not working and I cannot use turbo button.
2- after reinstalling windows 8.1 I got unknown device with HW ID "ACPI\VEN_ENE&DEV_0110"
I tried to install all drivers and utils but without luck.
best regards

Quote from: BlueAlexFPS;103334
I don't think you need to update EC, just install the SCM and it will works.
did not solve the issue
I tool it to service center already
- - - Updated - - -
Quote from: Tobi;103361
Does all the quick launch buttons can't work properly? or just one? Does the button light on when you press it?
and which Turbo button do you mean? the G button? or the cooler boost button?
yes all of them when you press any button does not light up, I meant the cooler boost button

Quick Launch Panel Not Working on GT70 2PC

Similar Messages

Maybe you are looking for