Quick mask wont show green highlight CS5

This is driving me mad, new to CS5 but have used various other programs with mask feature, I can select a quick mask with the colour set to white and black, on the black it will highlight in Red no problem but on the white it won't hight light in green, it does remove any red but won't hightlight in green for an area I want to keep.
I was trying to make the whites of the eye whiter by creating a quick mask and highligting the whites in green (so with the white colour selected) and then adjusting the levels for the selected area but it just won't work.
Looked every where for an answer.
Apologies if this is in the wrong area as never posted before.
Thanks,
Mark

You are misunderstanding quick masks. There is no secondary selection color. PS only shows the actual selecton. Read the online help.
Mylenium

Similar Messages

How do I keep the settings in color range/quick mask from reverting?

When I use Color Range, I like to use Quick Mask as the selection preview, and I like to use the quick mask to show the selected area. Since upgrading to CC, these settings don't seem to stick -- every time I open up color range, the selection preview defaults to "none", and the quick mask setting is defaulting to show masked areas. This is a pesky two-step process to set up and it used to stay as the default setting once I set it up the first time. Is there a way to make the current settings "stick" for use with the next file?

I just did a short SR test, first I exported to 480p, then I saved the file. Now I have 2 files one 11.9mb (export) and the other 42.8mb (save). I then took the save file and performed an export on it to 480p. Guess what, it saved at 11.9mb. So it seemed to save me 3/4 of the space. Lets see what happens with a 17 minute SR. Thanks!
Any suggestions on getting the sound louder with the SR?
For anyone else ever seeing this post, for me the best was using an external speaker whether wired or bluetooth, facing the left side of the computer where the internal mic hole is. Good Luck!

Quick mask problem in CS5

I am a newbie and I have come across a problem which I cannot seem to rectify, when trying to use the quick mask tool and select the paintbrush it does not work, i.e no mask is created, can anyone help

Adobe Acrobat doesn't have a quick mask tool.

Quick Mask mode has suddenly stopped working.

I have Photoshop CS5. I have successfully created selections hundreds of times using Quick Mask mode, but today it has stopped working. Here are the steps I am performing:
Activate Quick Mask by clicking the rectangular icon at the bottom of the tool bar.
Using the brush tool with opacity at 100%, I paint a selection. The familiar ruby-red color is there to show what I have painted.
Once I am done painting my selection, I re-click the Quick Mask button, which is supposed to convert whatever has been painted red to a normal selection, outlined with marching ants. I was doing this many times just last week and it worked perfectly.
But now, instead of seeing the marching ants highlighting my selection, I see nothing at all. The red highlighting disappears and nothing is selected. To make matters worse, at this point in the process Photoshop never fully disengages from Quick Mask mode and gets stuck there. If I click the Quick Mask icon again, my original selection reappears painted in red. From this point, I can't seem to get out of Quick mask mode and the other tools no longer function properly.
I tried resetting all preferences. When that didn't work I de-installed and re-installed Photoshop, and that didn't work either. Has anyone experienced anything like this?

Its possible you accidently hid the selections. Look in the view menu and see if selections is marked to be shown or hidden. I think it is ctrl-h or cmd-h but at the moment I don't recall. Once I boot up photoshop I can verify it.

Using the "quick mask" tool to change a color

Good Day All
I am a wee bit confused. I wanted to show someone a way to change hair color in Photoshop CS5. Using the method I have used in CS4 I did the following.
In CS%, I clicked on the brush tool and then on the “quick mask” tool. Stared painting in the area I wanted to change. When I clicked to take off the quick mask tool, the paining I had done disappeared. That was it. In CS4 when I turned off the quick mask tool I would get an outline if the mask.
Is there a setting I am missing or has CS5 changed how this works?
Thanks All

Thank you Mylenium....
Here is more information.....
These are the steps I do and the changes that take place
1) Select the brush tool
2) Select quick mask. When I do this, on the layers panel, the background layer is not highlighted
On the bottom left hand side the “set foreground & back ground color changes from (foreround) black to gray and the background color stays white
3) Paint (it is red) the area I want to change and click on the quick mask.
The red where I painted disappears, and the outline is not showing. On the layers panel on the right hand side is now highlighted and on the bottom left hand side the set foreground color changes to black.
4) If I click on the quick mask, the painted area comes back.
I located the “quick mask” under the tab channels. It is displayed as a separate channel. When I turn off the quick mask, the quick mask channel disappears. When I turn on the quick mask, the quick mask channel reappears….
Do I have something set wrong

IPod wont show songs under artists

Referring to this website: http://docs.info.apple.com/article.html?artnum=302773
i have a question:
I am experiencing the same problem as described on that page. Only thing is, it is much more severe for me. I'm guessing that over 100 of my 900 songs wont show under artists.
Yet, most of my songs do not have an album name.
First question, why do only a part of those songs that don't have an album name not show under artists on my iPod?
Secondly, is there no easier way to get this problem fixed than giving the songs an album name? Firstly, it's impossible for me to know what songs do show and which are not shown under artists on my iPod, i only know a few. It's not like im going to go through all 900 songs to find this out. Secondly, i do not know the correct album name for each song. If i fix an album name, i want it to be correct and not made up in my head. Thirdly, it takes ages and ages to name albums for all songs that do not have album names.
So is there any easier way?

"First question, why do only a part of those songs that don't have an album name not show under artists on my iPod?"
It's a bug as far as I know, possibly in the future some update or change to iTunes and/or the iPod software will rectify it.
"Secondly, is there no easier way to get this problem fixed than giving the songs an album name"
At the moment, no there's not.
"it takes ages and ages to name albums for all songs that do not have album names"
Actually you can do it quite quickly. Sort your library by Album to bring all the blanks together. Click on the first song in the list and holding down the Shift key click on the last. This will highlight all in between . Right click on the list and chose Get Info, say yes when you are asked if you want to update multiple items. Put None or Unknown or any title of your choice in the album field and click OK. This should sort the problem out for you.
There's also one other thing that that contributes to songs not appearing under Artist on the iPod and that is if the song is marked as part of a compilation.
If the tracks are ticked in the Get Info>Info tab as part of a compilation, they will not appear under Artist on the iPod. Highlight a song in iTunes that you know is not appearing correctly on your iPod. Right click on it and choose Get Info and click the Info tab (alternatively choose Get Info from the File menu), if "Part of a Compilation" is marked untick it and afterwards update your iPod, you should find it now appears as normal. Compilations are stored in a separate folder in iTunes so the songs don't appear inside the normal Artist>Album folder which may be why this happens.

Ipod touch wont show up in usb or itunes help pages just bring me in circles. how can i get it to show up. I use windows xp at home and tried everything then tried a relatives computer using windows 7 and still nothing. this is an older ipod touch

the help pagers just bring me around in circles. the ipod doesn't show up in system devices under the busses. i've tried just about everything. Im using windows xp at home and though maybe it was because of that. so went to a relatives and used a brand new lap top avus with windows 7 and it wont show up here either. When i got the ipod a few days ago from a third party the only screen i could get to come up was a picture of a usb cord with an arrow pointing towards the itunes logo. I downloaded i tunes and couldn't get it to change. brought it to at&t store today they hooked it up with my usb cord to thier computer and suddenly the menu screens work and i could even get online with it yet when i try to hook it up to one of my computers it doesn't show up anywere where can i go to get this fixed and fixed quick jumping around the apple help pages have put me in a foul mood and im sick of it two days spent trying to get it to show now. im sick of waiting around i need help asap so i can return this **** thing if it turns out it is broken somehow..which i dont think it is.

What gen iPod (3,4?) did you buy?

Ical wont show hours in any view

I upgraded to Leopard and since then ical wont show me any hours and times...
this happen only in my main user, when i log on as Guest or Root there is no problems...
I've tried already to delete all the preferences, all calendars and even to reinstall ical from Leopard installation disk... But the problem stays like before... :-/
any ideas? i am hopeless... i really need to use my ical...
Thanks in advance,
xxx Alona

well if this forum had a button next to each post called "buy him a beer," i would gladly click it (several times). But there's not so..thanks for the post. I was convinced it was .Mac thing. And that combined with the fact that this problem is not exactly to search for (queries on this Site and others using "to" "from" "time" "missing" weren't getting me anywhere quickly).
You solution below worked like a charm.
thanks
--alex

Ipod 1st gen wont show up in itunes 4.0

I recently upgraded my old imac g4 to 10.3.9. Now, my old shuffle will not show up in itunes 4.0. It mounts itself to the desktop, but wont show up? Any quick fixes out there?
Thanks,
MB

Went through something similar on our daughter's old iMac G3. Solution there was to install the most advanced version of iTunes that we could which, I think, was 7.0.something. Her Nano then started playing properly.

MacBook Pro power adapter doesn't show green light when fully charged

I've had a quick search through the communities and there are a lot of posts about chargers and indicator lights, but I'm not sure I'm really satisfied about my own issue so I thought I'd ask anyway.
Basically, I bought a spare power adapter (genuine Apple 85W MagSafe2) for my new 15" Retina MacBook Pro in a store the other day, to save me lugging my main adapter to and from work all the time.
Using it for the first time made me realise that the adapter I got with my MBP behaves slightly differently re: the LED indicators. The new one from the store shows amber until the MBP is fully charged, then solid green once fully charged. This I believe is perfectly normal.
The charger I got with the MBP shows amber whilst charging, but only shows green very briefly when fully charged and then the indicator goes out completely. OSX (10.8.2) still indicates that it is connected to the power source though, and the battery doesn't drain or anything at this point - it definitely appears to be functioning as expected.
Aside from this, I can determine no real difference between the two adapters in terms of charging speed or general functionality, they both appear fine.
I just wondered if anyone else had ever seen this?
I did reset the MBP's SMC settings too, but it made no difference. I'm inclined to think there isn't an issue with the laptop itself since the new adapter's indicators work exactly as I'd expect, but then again the original adapter seems to function perfectly so I'm wondering if there's just some trivial issue with the green LEDs or something like that.

Really doesn't matter if anyone else has or has not seen something like what you have. Your original adapter is faulty in one way or another and you should take it in to Apple with your rMBP to show them what is happening and Ask Nicely for a new one that works correctly.

Quick mask mode problem in Photoshop CS6 64bit

Hi, I have recently installed Photoshop CS6 after previous happy experience with CS3.
The software appears to be seizing up when editing a selection in quick mask mode (image or layer mask) under the following conditions:
- 64 bit mode
- image > screen size, especially at 100% maginification
- or image magnification adjusted whilst in quick mask
The red mask appears slowly and only where I move the mouse curser - but will not cover the entire masked area.
The software freezes, and I have to kill the process from the OS. Task manager shows its status as 'running' and memory / CPU do not appear to be maxed out.
System info:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2394 MHz
Built-in memory: 3955 MB
Free memory: 1488 MB
Memory available to Photoshop: 3360 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Mobility Radeon HD 5650
Video Card Number: 1
Video Card: ATI Mobility Radeon HD 5650
OpenCL Unavailable
Driver Version: 8.712.2.1000
Driver Date: 20100315000000.000000-000
Video Card Driver: atiu9p64.dll,aticfx64.dll,aticfx64.dll,atiu9pag,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 1600 x 900 x 4294967296 colors
Video Card Caption: ATI Mobility Radeon HD 5650
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 91198564117458096913
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\User\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 232.9G, 164.9G free
Any help with this appreciated as I use QM a good deal,
Thanks
Tim

Boilerplate-text:
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Icon previews wont show for some mp3 files

For some reason I have about 30 albums (out of around 1000...which isn't too bad of a ratio) that wont show the album art for the icon preview. Instead it shows an image of an old iTunes logo, I can't remember which version of iTunes, but it's the version that has a green note on top of the disc. Is there a way to fix this? Thanks.

Do you have an album specified for the mp3 song. I've noticed that if I only have a couple of songs for an artist and none has the album specified, they don't always show up. If I add the album, they will sync the next time. Hope this helps.

Quick mask mode no longer works for Photoshop CC

I have the latest version of Photoshop CC, and the quick-mask-mode no longer functions as it should. When I try to modify an existing mask with the quick-mask-mode the highlighted read only appears on some of the photo being edited. In additions, those highlighted that do appear red only do so very slowly. This problem appeared after a recent update to Photoshop CC.
I have been using this quick-mask-mode for the last 10 years and have never seen this bug before.
I know how to check the options and my opacity is at 50%.
I use quick-mask-mode frequently and I need it to work.
Is there a setting I need to change?
It is hard to believe that I am the only one with this problem.

I'm having the same problem and I just downloaded the latest updates, which didn't seem to fix it. Here's a screen shot:
And the red just along his tricep I had to draw "blind" because it wouldn't populate the brush stroke to cover his arm until after I moved my mouse to the side of the screen. Any changes or movement on the screen is slower than molasses.

Hi All, ready for a quick mask question from a newbie ;-) ?

When I make a quick mask selection, it becomas "red-ish" as it suppose to. When I leave quick mask mode however, the painted area does not become a visible (yes I checked the correct option dialogue box, I guess, according to a friend) selected area though. But when I make any adjustment, eg color saturation, it only affects the area I selected in the quick mask mode, which I cannot see except for the adjustment. How on earth did I manage to make this happen. What have I done wrong or haven't done at all? You kind attention and quick reply is highly appreciated. Best /Stefan

Thanks a lot, Sir, much appreciated. Under View options one can selected "show selection outlines or boundaries", well not in swedish, it says something completely different, but just as you said, there it was!
Again, thanks a lot!

No Quick Mask mode in Photoshop CC Win

My Photopshop CC for windows does not open quick mask mode when I try any of these three (Select / edit in quick mask, or hitting Q on the keyboard, or clicking the washing machine Icon) Instead it goes into and Alpha/8 or 16 mode. And I am not able to paint any masks? What an I missing? I have the latest software (last week) and use the windows version.

Usually when Quick Mask is set up properly, the selected (painted) areas are shown as 50% red. For example when you use a brush to paint your selected areas. By the way using ordinary selection tools while in Quick Mask mode will not show the red area, you must use the selection tools then go into Quick mask mode to see the red area.
To see what your Quick Mask settings are like, double-click the Quick Mask icon, and the options should look like this:
The 50% red comes from olden days when graphic designers would apply a red film called "Rubylith" to mask off areas in artwork and tailor it with an exacto knife.

Quick mask wont show green highlight CS5

Similar Messages

Maybe you are looking for