Quick menu does not recognize my Canon scanner

I've been using my Canon 9000F scanner for a couple of months. Added an iX6520 printer today and installed all the software. The Quick Menu no longer recognizes the scanner. How do I trouble shoot this? Thanks.
System: Windows 7 x64

Hello Mike9685,
Please try disconnecting the scanner and connecting it back into the computer again. Be sure it is connected via USB cable directly to the computer instead of going through a USB hub or the like. If the issue persists, please try scanning with the MP Navigator software the scanner came bundled with, to help test the issue. If all else fails, please reply with the specific error or message that occurs when you attempt to scan.
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Image Capture does not recognize my Canon Pixma MP150 printer

Image Capture does not recognize my Canon Pixma MP150 printer since I upgraded to Mavericks.

To scan with Image Capture you need an ICA driver. Looking through the CanonDevices list in the /Library/Image Capture folder I cannot see an entry for the MP150. And I checked Canon Australia's web site and there is no ICA driver for the MP150. There is a scanner driver and MP Navigator for OS X 10.7. You may be able to install and use the driver and application on 10.9, although you will have to get past Gatekeeper to install both items as they are not digitally signed. To do this, you can hold down the Control key and click on the installer. A pop-up menu will appear and you can select Open. You will then be able to install the driver and then the application. If they do install then see if you can open MP Navigator and scan from the MP150.

Photoshop Elenents 13 does not recognize my Canon Pixma Pro Mark II 9000 printer.

Photoshop Elements 13 does not recognize my Canon Pixma Pro Mark II 9000 printer. I get the following error message “The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing” and I cannot print.

I have been checking my computer files and find that PSE 13 is only the 32 bit system and my computer is a 64 bit system. In PSE 12 I was able to take the Adobe
Twain Driver (Twain 32 bit} in to the Optional Plug-in folder and then my Canon Scanner would work with PSE 12. My printer Canon Pixma Mark II 9000 worked with PSE 12. Now that I have upgraded to PSE 13 neither the scanner or my printer will work. There I no “Optional Plug-in Folder” in PSE 13. Is there some way that I can drag files into PSE 13 that will enable both my scanner and printer to work? My scanner is a Canon Canoscan 8800.
Or must I go back to using PSE 12.
Robbie

DNG Converter does not recognize my Canon Raw files

I have the Canon EOS Rebel 450D. I downloaded the Mac version of the DNG converter, ver. 5.6. However it does not recognize the Raw or CR2 file. According to what I read on the Adobe website, my camera is supported. Why is it not recognizing the file?

Seem to be a few threads recently where people are having printer connectivity problems - often Canon. If you haven't already, you could try resetting the printing system, it sometimes helps re-establish a connection:
http://support.apple.com/kb/HT1341

I have 2008 aluminum macbook with OS X Lion. It does not recognize my canon sd1000. Finder does not show the camera.

My macbook does not recognize Canon SD1000. Camera goes to transfer mode and it looks like the problem is the computer. Finder do not show the camera at all. (I am not using any programs, iphoto etc...).

Instead GarageBand recognize my keyboard and i can play normally, also, if it can help, those are the Audio and Midi Logic Preferences and the Controller Surfaces Setup with the keyboard connected :

Acrobat adobe pdf does not show up canon scanner using

Hi-I have just installed adobe acrobat pro 6-the problem is i want to scan in some documents and turn them into PDF's but my adobe acrobat does not realise or show that i have a scanner (canon 5000F).I have contacted canon-and they suggested i downloaded some new software for the scanner but when i try and install the new softawre it will not install and just starts up the printer utility thing at the top.They also suggested i try to uninstall the drivers for the scanner first but again when i download the uninstall utility and try to run it it does not run/set up but just starts the printer utility thing again.How can i make adobe acrobat pro 6 realise i have a scanner so as i can scan in documents to turn them into PDF's ? Any suggestions plaese
thanks
rick

Concentrate on getting the scanner working without any Adobe software. Once you can scan to a file, any OSX program (except Adobe) that can read the file can generate PDF files via the Print command.

Outlook AddIn context menu does not recognize MailItem

Hi,
I just start program for Outlook in Visual Studio. I plan to start from creating right click menu in Outlook Home email panel. I got the example code from
Context Menu for a Mail Item of
Extending the User Interface in Outlook 2010. When I test it, I select a email in Outlook, right click my context menu item, it does not think it's a MailItem. What's wrong in my code? How I can debug it? Do you know any good book/blog/example/tutorial?
Here is the code:
<contextMenus>
<contextMenu idMso="ContextMenuMailItem">
<button id="MyContextMenuMailItem"
label="OAIContextMenuMailItem"
onAction="OnMyContextMenu_Click"/>
</contextMenu>
</contextMenus>
public void OnMyContextMenu_Click(Office.IRibbonControl control)
System.Windows.Forms.MessageBox.Show("Your Context Menu Works!");
if (control.Context is Outlook.Explorer)
Outlook.Explorer explorer = control.Context as Outlook.Explorer;
Outlook.Selection selection = explorer.Selection;
if (selection.Count == 1)
if (selection[1] is Outlook.MailItem)
Outlook.MailItem oMail = selection[1] as Outlook.MailItem;
//return oMail.Sent;
System.Windows.Forms.MessageBox.Show("Sent");
else
System.Windows.Forms.MessageBox.Show("Not MailItem");
else
System.Windows.Forms.MessageBox.Show("Multiple selection");
else if (control.Context is Outlook.Inspector)
Outlook.Inspector oInsp = control.Context as Outlook.Inspector;
if (oInsp.CurrentItem is Outlook.MailItem)
Outlook.MailItem oMail = oInsp.CurrentItem as Outlook.MailItem;
//return oMail.Sent;
System.Windows.Forms.MessageBox.Show("Sent at Inspector");
else
System.Windows.Forms.MessageBox.Show("Not MailItem at Inspector");
else
System.Windows.Forms.MessageBox.Show("not a Explorer/Inspector");
Thank you so much
Wes
Wes

Can you try to retrieve the Class property using reflection?
Dmitry Streblechenko (MVP)
http://www.dimastr.com/redemption
Redemption - what the Outlook
Object Model should have been
Version 5.5 is now available!

Canon 5d mark III does not recognize the Canon Speedlite 580EX II is connected

When I choose External Speedlite control/ Flash function settings on the 5D.
I get a dialogue that says
This menu cannot be displayed. Incompatible flash or flash's power is turned off.
Flash is on. If I take a photo, flash fire's. Pictures are ALWAYS over exposed when using the flash.
Does the 580EX II work with the 5D Mark III?
Solved!
Go to Solution.

The loose foot plate is a fairly common issue (and easily fixed).
But also keep in mind that there are 5 metal contact pins on the foot of the flash and these mate with the 5 pins on the camera hot-shoe. The 6th contact is the hot-shoe itself (the metal foot plate is actually the ground contact and it mates with the rails on the camera hot-shoe to provide the ground connection.)
Those 5 pins are spring-loaded. If you push them with your finger tips, they should push in and spring back out when you release them. If a piece of dirt manages to get widged into the pin, then it might keep it from springing back out properly and prevent it from making a good connection to the camera. If this happens, the camera may believe it does not have an ETTL flash connected. The pins would need to be cleaned (Do not oil them... that would only attract more dirt. The pins have a loose fit that requires no lubricant. Just clean out whatever dirt may be present if the pins are not performing as they should).
Tim Campbell
5D II, 5D III, 60Da

Imovie does not recognize my Canon Vixia HF R10 camcorder.

I cannot seem to get my Mac (OS X 10.6.8) or IMovie11 to recognize my Canon Vixia HF R10 camcoder so that I may download the movies I've taken.
I have successfully donloaded movies from this camcoder in the past but for some reason it is not working now. When I direct the camcoder to connect with the computer, two externa; drive icons show up on my desktop, "No Name" and "Canon." Clicking on either one doesn't help either.
I've also tried to download the movies by taking the storage card out and placing it in a card reader also attached a usb port.....nothing.
Furthermore, Iphoto comes on automatically.
Can someone please help? Thanks.

I cannot seem to get my Mac (OS X 10.6.8) or IMovie11 to recognize my Canon Vixia HF R10 camcoder so that I may download the movies I've taken.
I have successfully donloaded movies from this camcoder in the past but for some reason it is not working now. When I direct the camcoder to connect with the computer, two externa; drive icons show up on my desktop, "No Name" and "Canon." Clicking on either one doesn't help either.
I've also tried to download the movies by taking the storage card out and placing it in a card reader also attached a usb port.....nothing.
Furthermore, Iphoto comes on automatically.
Can someone please help? Thanks.

Pre 7 Trial does not recognize my canon HD vixia HG21

I have spent 11 days with my Pre 7 trial trying to get it to recognize my camera. It is AVCHD. it cannot detect my camera. I was hoping to bypass the cheap software that came with the camera and just use Adobe to retrieve my videos, edit them, and then burn them to DVD. Reading the forums it looks like I am going to have a lot of problems. I don't know because I can't get past step one.
I took care of the warning at start up stating that content was missing.
So far i am not liking this program.
This is my first time ever editing video. I am worried, looking at all these posts, what other problems I am going to have.
Can someone help me get past step one anyway?

Jill,
I think that it is time for us to look at your computer resources to determine if those are involved in the problems that you described for your computer as well as Premiere Elements 7. Questions/Considerations.....
Operating System and 32 or 64 bit
Installed RAM and Available RAM
Total Capacity of C: (Local) Drive and free hard drive space there
Do you have an external hard drive and is it formatted NTFS, not FAT32
Does your computer operating system control the Virtual Memory or have you used your own settings?
Do you defragment the computer routinely and frequently?
When you are running Premiere Elements 7 are you multitasking, maybe using other programs at the same time?
We need to get the drive locations under control and understood. Confusion on what letter represents which drive can create problems if you do not know to which drive you are assigning videos or whatever. In the good old days, you started with (A:) drive which was for those 3 1/2 floppy discs. That drive was usually designed as "3 1/2 Floppy (A:)". The (C:) your local drive was designed "Local Disk (C:)" that is where your Premiere Elements program files should be I am told that there was a (B:) drive at one time which was for 5 1/2 floppy discs. After that the drives and the letters assigned by the operating system could be from:
(a) installation of DVD/CD burner(s). Typically you might see them designed: "DVD-RW Drive" with a letter next to it as well as "DVD-RAM Drive" with a letter after it. How drive names and letters are determined is a whole other story.
(b) insertion of a Flash Drive (aka Jump Drive) into one of the USB ports of the computer...your would probably see that represented as "Removal Drive or the brand name of the Flash Drive" with a letter next to it.
(c) installation of an external hard drive which you might see as "FreeAgent Drive" with a letter next to it....it is important to know what letter the external hard drive has been assigned by the system.
In my system it is very important that before I unplug any external hard drives or flash drives that I use the Safely Remove Hardware Icon in the Task panel to avoid problems. Also, Premiere Elements thumbnails are just thumbnails that reference back to the source media that you have saved on the local or external hard drive. Once you have imported source media into Premiere Elements, save and close the project, you will get into serious reconnect media problems if you start moving the source media from the location that Premiere Elements initially recognized.
This next part I will just address quickly and save for the next time. When you use the program that came with the camcorder in order to get the video to the computer hard drive, make sure you watch the export file format that you use.
I hope that these focus points will help to get your look at Premiere Elements 7 moving along, If any additional questions, do not hesitate to ask.
ATR

Mavericks X 10.9.4 does not recognize Canoscan 8800f scanner

I was previously using my Canoscan 8800f scanner. I had Canon on the phone for 30 minutes trying to resolve my scanning issue. I download all of the drivers necessary (see below) but I get a "Fatal Exception" message when opening the Canon Navigator. The Canon Support representative could see all of the appropraite software was installed, yet the Mac was not recognizing my scanner. The scanner was plugged into two different USBs with no success. The support rep suggested either get a new USB cord or call Apple. Hel
1) File Name: msd_-mac-8800f-13_9_2a-ej7.dmg
This file is a TWAIN-compliant scanner driver for Canon color image scanner.
2)
File Name: mmno-mac-mpnv10-1_0_0a-en.dmg
In OS X v10.7/10.8/10.9/10.10, you will need to set up MP Navigator EX 1.0 Opener with Image Capture before scanning using the Operation Panel or Scanner Buttons on the machine.
3)
File Name: mnve_1_0-mac-all-1_0_8-ej7.dmg
This application software allows you to scan, save and print photos and documents. You can also edit images, or attach images to e-mail using this application software.

Check in the Mac App Store to see if there are any new drivers for it. If not then try using Image Capture (already installed on your iMac) and attempt to scan from that. If you have never use IC then please click Mac Basics: Using a scanner - Apple Support for instructions.
If the scanner still cannot be seen then it's not directly compatible with OS X and you will need to buy a tool such as VueScan.

Mac version of Elements 12 does not recognize HP L7680 scanner

Can anyone suggest a fix?

I installed the driver and restarted the computer. When I tried to activate the driver it launched Elements 12 and I got the following error:

Canon quick menu software does not recognize scanner for MG5520

Hi,
I have Canon Wireless Inkjet Photo All-In-One printer (MG5520). I have installed Canon complete software. But the quick menu does not recognize my scanner. In Preferences only Printer is listed, but for Scanner nothing is available. Could you please suggest how to get scanner as well for my device?
My OS is Windows 7.
Regards,
Sharath.

Hi sharma_swp,
Reinstalling the drivers for the printer from the Canon USA website should provide the scanning option on the Quick Menu. Please click here to go to the Drivers and Software page for the PIXMA MG5520. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "RECOMMENDED DOWNLOADS" section and click the FULL DRIVER AND SOFTWARE PACKAGE file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once the file has been downloaded, please double-click on it to reinstall the drivers and software on your computer, then restart your computer. If you still have difficulty with the Quick Menu showing items related to scanning, please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Dynamic Menu does not appear completely in RF Scanner Screen

Hi,
Problem is with the display of the dynamic menu on the scanner, Currently in R/3 4.6B system the whole SAP dynamic menu is visible on the scanner , however in ECC6.0 the dynamic menu does not fit on the scanner display entirely.
Any ideas why this happens.?
Regards
Dedeepya C

No replies.
Closing Thread..

Elements 12 - does not recognize raw c2r files using EOS 70D

How to tell what version of Camera Raw is installed when Elements does not recognize the Canon raw extension? I have updated within the last five minutes.

SDMarianne wrote:
How to tell what version of Camera Raw is installed when Elements does not recognize the Canon raw extension? I have updated within the last five minutes.
to see what version of Camera Raw is installed, you can go to:
Help >> About Plug in >> Camera Raw
See this picture:
You can also try to update your version if it isn't version 8.5
There is also a possibility to use DNG converter to load any raw files from any cameras but see if this answers your question.

Quick menu does not recognize my Canon scanner

Similar Messages

Maybe you are looking for