Quick menu in photoshop question

Hello
Normally I make all my menus in Photoshop. For this particular menu the client wants a sideways triangle or box symbol prior to the title. This symbol would also highlight with the name of the clip. Do I make that in photoshop as well or is that added in encore? Thank you for any tips.

I agree with Stanley. I do such in PS.
Just make sure that your graphic element is in the Button's Layer Set, with the proper naming convention, such as (=1), (=2) or (=3). I also like Adobe's naming convention, and add the word "Highlight" to the end, though that part is not necessary. It just helps me keep tabs on things.
Good luck,
Hunt

Similar Messages

I am missing the add objects section from the fly out menu in Photoshop CS6. 3d workspace

I am missing the "add objects" section from the fly out menu in Photoshop CS6. I am in the 3D workspace of Photoshop. "Scene" is highlighted and I have clicked on the little fly out menu in the upper right hand corner of that panel. The whole section that should contain, Add objects, delete objects, duplicate objects, all the way through reverse order is missing. The add lights section above and render section below it is there. I am not new to Photoshop, but I am new to the 3D section of Photoshops work space.
I do know about creating a new layer in the layers tab and merging the objects together trick. But I kind of would like for the program to work correctly as I am sure that doing it that way will cause some sort of problems later in the work process.
Below are the specs of my system.
Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2394 MHz
Built-in memory: 32651 MB
Free memory: 28832 MB
Memory available to Photoshop: 29606 MB
Memory used by Photoshop: 89 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4600
Display: 3
I am actually running windows 8. So I am not sure why it is saying windows NT. Anyway...
Photoshop says that my software is up to date. I use Photoshop daily and everything else works just fine. I have looked through this forum and there is someone else who had the same issue as me but their question was not given a solution. So that is why I choose to post it again.
Any help will be great. Thank you!
Mark.

I've made tests with four different 3rd party tools: OpenGL Extension Viewer, GPU Caps Viewer, Compute4Cash OpenCL Diagnostic Tool and Mudlord's Glide3x wrapper tester. All those tools report no problems with my video card driver and OpenGL/CL.
I have contacted nVidia and based on reports from the tools and visual tests from GPU Caps Viewer nVidia support doesn't see a problem with my driver.
I found sniffer_gpu.exe which according to Adobe Help pages is a kind of diagnostic tool and determines whether Photoshop uses the graphic card OpenCL or not. Here is the output:
Device: 00000000002B1BE8 has video RAM(MB): 1023
Vendor string: NVIDIA Corporation
Renderer string: GeForce GTX 650/PCIe/SSE2
Version string: 3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.1 CUDA 4.2.1
Return code: 3
From Adobe GPU Sniffer tool, it looks OK.
On the other hand, I have your word that there is no problem with Photoshop not recognizing OpenCL for my card and that nVidia driver has problems. Can you justify this somehow? Perhaps you could provide more details on technical level, or another utility to run and extract details, to at least identify the problem Photoshop has and hopefully solve it on either side.
P.S. During tests there were two things which I noticed, but they are probably not related to the issue:
1. One tool reports the lack of Windows registry key SOFTWARE/Microsoft/Windows (NT)/CurrentVersion/OpenGLDrivers. But according to your previous statement, Photoshop only uses OS calls, no registry and according to nVidia, this key is not used in Windows 7.
2. During some tests GPU Caps Viewer reports that "OpenCL CPU not supported on the selected platform". This is not complaining about GPU, only about CPU. But Photoshop is complaining about GPU, so it shouldn't be relevant.

Creating DVD menu in Photoshop?

Hi all,
I'm wondering if it's possible to create a menu using Photoshop and import it into DVD Studio Pro with all the layers intact along with all the buttons? I am used to using Adobe Encore which has this feature. All you need to do in Photoshop is name each layer a certain way and as soon as you import your .psd file into Encore it automatically converts each specified layer to a button, image, link, etc. Does DVD Studio Pro have this feature as well?
Thanks all!

Does not sound like it is the same (you cannot automatically create links etc.)
Some links on Photoshop in DVD SP
Mapping Menus
Layered Menus
Quick Menus Ovwerview

I ask the third time: How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160

I ask the third time:
How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160.
It is unbelievable that such an expensive software does not provide a proper lay out wit a high screen resolution!
It is also unbelivable that it is not possible to get a qualified employee of ADOBE on the phone in Germany.
hope of feed back: e-mail: [email protected]

Chris Cox answered your question here:
I have PS cs6 extended and a new laptop with screen resolution of 3840x2160. Now all control elements and menues are so small that I can not reed them. How can I make them readable without reducing the resolution of the schreen?

Quick Menu Software for Canon PIXMA MX452

Whenever I click on the Quick Menu program for the subject product, I get the following error message:
Canon Quick Menu has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
I have uninstalled and reinstalled the driver and Quick Menu software several times, from both the disc provided and on-line downloads.
I have turned off my anti-virus/firewall program and also told the security program that the Canon program is a trusted application.
I am able to print/scan/copy, but not from the Quick Menu, which is more convenient.
Please help.
Solved!
Go to Solution.

Hi clarkdjensen,
There may be a third party scanner driver interfering with Quick Menu. Please try the following:
1. Click 'Start' and then 'Computer'.
2. On the left-hand pane, click the down arrow beside Local Disk (C: ).
3. Click the down arrow beside Windows to open the folder
4. Highlight the twain_32 folder.
5. The folder should have 2 folders that start with PIXMA MX452 and a file called wiatwain.ds. Any other folders or files should be dragged to the desktop.
6. Reboot the computer and try scanning again.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Edit Menu in Photoshop no longer works.

My "Edit Menu in Photoshop" button no longer works. How do I fix this?
Encore CS6
OSX 10.8.5
Thanks.

The frustrating part is that one little button/function is so very important in my Encore workflow.
Essential. I'm not on/in the cloud, so can't experiment. I have been curious whether installation of PS CC breaks this (or not), and in your case whether the recent update could have interferred.
You seem to have had CS6 Encore going to CS6 PS even with CC installed.
Independent of those issues, the question is how do you get Encore CS6 to go to EITHER PS CS6 or CC if it is going to neither.

How do I get Quick menu to recognize both my Canon printer & Canon scanner?

When I installed my printer, the settings in Quick menu for my scanner were wiped out. How do I get Quick menu to recognize both devices?

Hi DGA,
In order for scanner options for both models to show up, you must have both the MP Navigator for the LiDE 210 installed and the My Image Garden for the MG3220 installed. Please make sure you have both by going to your Start screen, then type in either MP Navigator or My Image Garden into the start screen. Once you start typing it will search your computer for those programs and will display an icon if installed.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My MX-922 quick menu shows the scanner but no printer. It doesn't show up in the drop down in tools.

MX 922 quick menu shows up as scanner but not as a printer. It doesn't show up in drop down menu in tools.
So I can't print from Canon appications. Mac - Yosimite

Hi COGO,
You can try reinstalling the printer using the latest drivers from the Canon USA website to get the printer to show up in the Quick Menu. Prior to reinstalling, please close the Quick Menu and restart your Mac. Once your Mac is restarted, please click here to go to the Drivers and Software page for the PIXMA MX922. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "RECOMMENDED FOR YOU" section and click the CUPS drivers file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once you have downloaded the CUPS drivers file, please follow the steps above to also download all other items from RECOMMENDED FOR YOU and DRIVERS sections. If you plan on using the printer wirelessly, you will also want to download the Canon IJ Network Tool from the SOFTWARE section.
Once all items are downloaded, please double-click on each of the items to install them on your Mac. Please ensure that the IJ Network Tool is the last item installed. Once all items have been reinstalled, please open the Quick Menu.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon quick menu software does not recognize scanner for MG5520

Hi,
I have Canon Wireless Inkjet Photo All-In-One printer (MG5520). I have installed Canon complete software. But the quick menu does not recognize my scanner. In Preferences only Printer is listed, but for Scanner nothing is available. Could you please suggest how to get scanner as well for my device?
My OS is Windows 7.
Regards,
Sharath.

Hi sharma_swp,
Reinstalling the drivers for the printer from the Canon USA website should provide the scanning option on the Quick Menu. Please click here to go to the Drivers and Software page for the PIXMA MG5520. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "RECOMMENDED DOWNLOADS" section and click the FULL DRIVER AND SOFTWARE PACKAGE file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once the file has been downloaded, please double-click on it to reinstall the drivers and software on your computer, then restart your computer. If you still have difficulty with the Quick Menu showing items related to scanning, please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Quick menu does not recognize my Canon scanner

I've been using my Canon 9000F scanner for a couple of months. Added an iX6520 printer today and installed all the software. The Quick Menu no longer recognizes the scanner. How do I trouble shoot this? Thanks.
System: Windows 7 x64

Hello Mike9685,
Please try disconnecting the scanner and connecting it back into the computer again. Be sure it is connected via USB cable directly to the computer instead of going through a USB hub or the like. If the issue persists, please try scanning with the MP Navigator software the scanner came bundled with, to help test the issue. If all else fails, please reply with the specific error or message that occurs when you attempt to scan.
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon Quick Menu - No icons

I use an iMac with Yosemite OSI and an MG7520 printer. notice on my MG7500 series Quick Menu that the Print as well as Device setings and maintenance toolbars have no icons; they're blank. The Scan, Web services, and Manual and device information has icons.

Hi ppile,
You can install the My Printer application from the Canon USA website to see if this will resolve the issue. Please click here to go to the Drivers and Software page for the PIXMA MG7520. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "SOFTWARE" section and click the MY PRINTER file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once you have downloaded the file, please double-click on it to install it on your Mac.
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I installed Canon Pixma MG5520, since, always get "canon quick menu has stopped working" how do I fi

I installed Canon Pixma MG5520 on win 7, since, always get "canon quick menu has stopped working" how do I fix please?

Hi thaluza,
We can see if there are files in a folder called TWAIN_32 other than those related to the printer that may be causing a conflict with the Quick Menu. If there are, we can temporarily remove the files to see if this will resolve the issue.
To move the non-Canon Twain files from the Twain_32 folder, please follow these steps:
1. Go to Computer / My Computer and locate the C: drive, then double-click on it to open.
2. Locate the WINDOWS folder, then double-click to open it.
3. Locate the TWAIN_32 folder, then double-click to open it.
4. Inside of the TWAIN_32 folder, you will see a folder for your printer as well as a WIATWAIN.DS file. If there are other files in that folder, you will want to move them to another location, preferably your Desktop by doing the following:
4-1. Click on each of the other items in the folder other than the the WIATWAIN.DS file and the folder for your printer to select them. You will want to hold the the CTRL key on your keyboard while selecting each of the items until all of the items except for the two referenced above are selected. Please be sure to leave the WIATWAIN.DS file and folder related to your printer inside of the TWAIN_32 folder.
4-2. With all of the items you want to move selected, please go to the EDIT menu and select the CUT option.
4-3. Go to your Desktop (main window that comes up when you start Windows with all of the icons on it) and right-click your mouse in any blank area, then choose the PASTE option. The items you selected from the TWAIN_32 folder should appear on the Desktop.
5. Try to launch the Quick Menu again.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Error message when trying to edit a menu in Photoshop.

Hi,
Having a horrible time with Encore. The latest niggle is with a menu I want to edit in Photoshop.
It's a simple four button menu with a single highlight created inside Encore. It has an animated background created in the usual way. When I try to select "Edit Menu in Photoshop" I get the following error message:
"Unable to execute script at line 0. photoshop is undefined"
I've searched the internet, found no refernce. Updated all my CS6 apps, problem remains.
Any help would be appreciated.

Hello,
That is quite unusual. Usually both programs connect to each other accurately. I was even able to use and older version of photoshop (i.e. cs5) and have encore cs6 link up to it.
Is your photoshop installation in the same directory as encore? Like "Program Files > Adobe > Encore / Photoshop" Are you using the 32bit version of photoshop or 64bit version? And what about Encore?
And can you also provide a screenshot of the error?
Thanks

"Edit Menu in Photoshop" not working?

If you have installed a new version of Photoshop, you may find that the command to "Edit Menu in Photoshop" no longer works.
The fix for this is simple. Just re-associate the .PSD extension with the new version of Photoshop.
You can do this in a couple of ways (all versions of Windows).
1 - Find a folder with a .PSD file in it.
Right-click the file, and choose the "Open With" dialogue.
Select the new installation of PhotoShop, and make sure that the check-box for "Always use this programme" is ticked.
Click on Open, and from now on all PSD files should be associated with the new installation. Some systems might require a restart to lock the association in.
2 - Go to Start/Settings/Control Panel/Folder Options.
Click on the tab marked "File Types".
Scroll down to the PSD type, and set the "open" command to the new installation of Photoshop.
That will do it.

Andy,
I think that Jeff got the problem handled, but this is something that we will all be living with for some time - dead links to FAQ's, other articles and the like. Stanely Jones had done a good job of finding many of the "lost" articles from the previous forum changeover. Don't know if he'll be motivated to do it all over again.
I would like to think that Adobe has someone working on getting some of the old stuff back, or at least re-linked. Right now, the various search engines still have the old dead links in most of their searches. I guess that it will take the 'bots a while to catch up, if they ever do.
At least Jeff & Neil have gotten some of the FAQ's back up and working. Good job!
Hunt

"Edit Menu in Photoshop" function is not working anymore due to new install of Photoshop.

I had Photoshop 7.0 installed on my system, and the "Edit Menu in Photoshop" function would bring up Photoshop 7.0, no problem.
I then installed Photoshop CS3.
When I pressed the "Edit Menu in Photoshop" button, it would still bring up the old Photoshop 7.0. Then I uninstalled Photoshop 7.0. Now, when I press the button, I get, "Could not edit in Photoshop. Photoshop does not appear to be installed."
Does anybody know where I can configure Encore (CS3), so that it will recognize Photoshop CS3? If not, what do I need to do to make this work (uninstall and install Encore?)

Andy,
I think that Jeff got the problem handled, but this is something that we will all be living with for some time - dead links to FAQ's, other articles and the like. Stanely Jones had done a good job of finding many of the "lost" articles from the previous forum changeover. Don't know if he'll be motivated to do it all over again.
I would like to think that Adobe has someone working on getting some of the old stuff back, or at least re-linked. Right now, the various search engines still have the old dead links in most of their searches. I guess that it will take the 'bots a while to catch up, if they ever do.
At least Jeff & Neil have gotten some of the FAQ's back up and working. Good job!
Hunt

Quick menu in photoshop question

Similar Messages

Maybe you are looking for