Quick Poll! CONCERNING: Water cooling!

Just want to ask some of you experienced guys what the best water cooling around is!

That question will change with each person you ask. I like the products from D-Tek Customs myself. Although Swiftech and Dangerden are good also.
If you want a run down on parts I would say
1) Cascade waterblock by "cathar"
2) Eheim 1250 pump
3) A big radiator, say from D-Tek
4) An in-line system is said to be better than one with a reservoir. But I prefer the benefits of a reservoir.
5) Make everything 1/2 inside diameter. And if you buy from different companies make sure everything is the same diameter.

Similar Messages

MSI r9 290 (reference), warranty concern (water cooling)

Hi,
I know that some manufacturers void the warranty of their r9 290 and r9 290x when the reference cooler is replaced with an aftermarket one, whether it's an air cooler or a water block. I was wondering if this was the case for MSI's reference r9 290.
Thanks.

Nevermind, I found this thread : https://forum-en.msi.com/index.php?topic=174490.0

3.3 Ghz. Overclocked, water cooled, MacPro 1,1 won't boot

I'm not good at writing, so bear with me...
Please understand all that I did can be filed under the categories of "For Fun" or "Because It Was There".
MacPro1,1 generally worked fine, but I think my PSU fan wasn't working and I shorted out the front panel USB.
Doing video, thinking after 5 years need a new Mac, but read about upgrades processor upgrades & decided to try.
So... Got two X5350's, did the BSEL and vid mods and got a usable machine for everything but processor intensive stuff. Might have been the heat from the PSU, but seemed more related to proc's temp. Decided to watercool. (Don't worry, I'll do an entire article on this later. Should be interesting, I've set it up to dump the computers heat to a GeoThermal ground loop)
I'm on vacation now. But right before I left I finished leak testing and did the first attempt at booting and...
No joy.
Got chimes, RAM bank LCD's, and didn't see any mobo warning lights. But no video (oh yeah- EK water block on a 5770 pushing two 30" ACD's). Didn't hear it accessing the hard drives at all, and the fans went up to full speed.
PRAM, SMC, yadayadayada... Still November Juliet.
BUT... I never reconnected the CPU's heatsink temperature thermistors to the mobo. The only one I was able to get off without breaking was to the Northbridge.
Questions:
A.) Does the lack of connected working thermistors explain the lack of booting?
B.) if A=True, then (**THE IMPORTANT QUESTION**) how to I get (buy, manufacture, or steal) a replacement pair?
C.) if A=False then Oh God, what have I done and how do I fix it?
To complicated matters, while getting the bubbles out (lifting/tilting) the computer slipped out of my hands onto it's side (mobo side down). No obvious damage, but the Koolance CPU-340 waterblock's are nickel/copper and kind of heavy!
MacPro1,1
2X X5350 (BSEL to 1333/3.3Ghz and VID to 1.425)
HD bay 1&2= 1Tb RAID0
HD bay 3&4= 1.5Tb RAID0
10 Gb RAM
2 generic FW & USB2 cards
BDR-205 eSATA
ATI HD5770
All thoughts, comments, and rude gestures appreciated.
Thanks In Advance,
Robert

Oh baby, its up & running! It was the RadioShack transistors that did the trick. (This just slays me... after $40 to get 25mm 3.5M screws, I get the answer to the thing puzzling me most from RadioShack.) See it at
http://www.youtube.com/watch?v=gCz5pqbvEwc
I've been having some Display issues with fine sparkly lines on the mini display port monitor (not the main with the ADC). Now, mind you, it's the FAR mdp because when you use the near one the second monitor won't come up with boot (always. even before the overclock). NOWHERE as bad as the old 8800. That one sparkled so bad it was like... (Lucy in the sky with diamonds, ohhhhh...).
This also seems to be heat related. I've noted that when I can stress the GPU the Temp of "CPU A Proximity" sensor rises. And it's not the CPU that's doing it, I showed this just by repeatedly testing the GPU in CineBench. (BTW, did you know Handbrake uses the GPU? Up to 40% at some times!).
So the next step is to unplug the 5770 and stress the system via Screen Sharing, but my guess is that there are issues with how the Mac uses the cards. Seriously, the X1900. the 8800, and now the 5770?
Nah, I'm not buying it anymore. They've got heat and power issues that they don't want to address, probably because it'd need an EFI update. And they ain't gonna do that 'cause EFI is really the only way to "Obsolete" you into a new purchase. And if they did, they'd have to address the "PSU fan won't go over 600rpm" issue, or face accusations that they 1.) Don't know how to fix it , or 2.) Don't wanna fix it- you just need to go buy a new computer!
Anyway, if I can figure anything about the Displays, I'll come back & let ya know.
BTW, yeah, I wanted an upgrade but I was more concerned with the extra seven 100 Watt light bulbs I have in my office (MacPro=400W, 2 30" ACD's=300W), and how to get rid of their heat. Hey, I'm middle-aged, fat, live in Texas and have two school aged kids that didn't like seeing their old man working at his desk in his underwear & wiping sweat from his face & pits with a shop towel. On the upside, the annoying neighbor kids quit hanging around.
But I thank you for the kudos. Gracias.
Robert
MacPro1,1
3.3Ghz OctoCore with GeoThermal-loop water cooling
12GB RAM
2.5TB (total) twin internal striped RAID arrays
.45 Longslide (laser sighting)
ATI 5770 to 2X 30in. Apple Cinema Displays
Phased plasma rifle (in the 40 watt range)
Internal Pioneer BDR-205

Quick poll IView

Hello SDNers,
I am in the phase of creating Quick poll IView for portal frontpage/Homepage(newly created role).
My concern is, how can I make Quick poll more beutifull like setting the background color of QP or something more innovative.
Other concern would be, I want to provide the Quick poll IView in only frontpage just below to detailed navigation position. Will it be possible ?
Finally when I created the Quick poll using Quick poll administration in Content management, >>>> then created the KM QP IView under Content administration by assigning the compaign Name to be used >>>> assigned to desktop inner pages.
Now, the QP IView doesn't allows me to vote. Only it shows the results
Please, provide me solution where I went wrong ? Appreciate your time and valuable inputs.
Looking forward to your responses.
Kind Regards,
Ravindra.

hi,
check the following link..
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/KMC/CreatingAQuick+Poll&
http://help.sap.com/saphelp_nw04s/helpdata/en/8b/47c43d99243851e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/44/726979d9f03ac1e10000000a155369/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0493bf90-0201-0010-43af-8d212b8d4fab
http://www.theunapologeticmexican.org/elgrito/2007/03/quick_poll.html
reward me points if it is helpful to you..
best of luck
shyja

MSI Big Bang XPower II - Corsair H60 Water cooling issue

So I am using a Corsair H60 water cooling on my MSI Big Bang XPower II mainboard. I have followed the correct instructions on installation but every time I turn the computer on once it its 31 it shuts down. Everything seems to be working correctly except the cooling. There are no instructions that really relate well to installation for this water cooling to this mother board so I have tried placing the pump power and the fan power on various different inputs. I have the pump just on a sys power fan and the 120mm fan blowing through the coils on the back of the machine connected to the CPU 1 head fan (as instructed in their videos). I am not 100% sure the pump is working but I know that the fan is working and the hardware overview shows it recognizes the fan.
anyone have some ideas to try to see if I can get this to work? I am also wondering if it is a faulty pump or something but it seems to be working.

Quote from: seth.eckert
I have the pump just on a sys power fan
The pump is not working. The 3-pin connector for a fan header is just for reading out pump speed. You need to power it with the molex connector.

Can we ask more than one question at a time in Quick Poll?

Dear Experts,
Can we have more than one question at a time in Quick Polling.
The User has to answer more than one question in single poll.
is that possible?
Thanks in advance for your attention.
Regards,
Viswes.

Hi Viswes,
Through customize u can achieve ur requirement..
Create two Quickpoll with different campaign name and start ongoing..
Next create iview for each quickpoll by using KM QuickPoll iView Template enter the corresponding campaign name for the quickpoll iview.
Next create one JspDynPage component in NWDS
In that JSP file
<iframe src="Give the preview path of Quickpoll iView 1" align="left" >
</iframe>
<iframe src="Give the preview path of Quickpoll iView2 " align="left" >
</iframe>
Now u create one iview for that JspDynPage component
in that two Quickpoll question will display in one iView..
Points are welcome if its helpful
Regards
Thillai

How to modify message in quick poll?

Hi all,
I have to customize the SAP quick poll somewhat.
I have done a setting whereby the user can see the results of the poll only after the the poll has been closed. Till then, he keeps seeing a message in the poll iView "The results of the poll will not be displayed until the quick poll is closed". Now, I want to remove this message and put my own instead.
I have found some property files that contain this string. But these files are contained inside a JAR, which in turn is contained inside a PAR. Can anybody tell me how to change such files? I tried unzipping the files and then zipping again, but the PAR is throwing some runtime errors, like the one below:
java.lang.ClassNotFoundException: com.sapportals.wcm.control.quickpoll.QPUserControl
     at java.lang.ClassLoader.findClass(ClassLoader.java:343)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:81)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry$LinkedClassLoader.findClass(CrtClassLoaderRegistry.java:79)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at com.sapportals.wcm.crt.CrtClassLoaderRegistry.findClass(CrtClassLoaderRegistry.java:131)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:190)
     at com.sapportals.wdf.element.ControlElement.createControl(ControlElement.java:73)
     at com.sapportals.wdf.element.ControlsElement.createControl(ControlsElement.java:97)
     at com.sapportals.wdf.element.PaneElement.createPane(PaneElement.java:131)
     at com.sapportals.wdf.element.PanesElement.createPaneStack(PanesElement.java:91)
     at com.sapportals.wdf.element.PaneElement.createPane(PaneElement.java:124)
     at com.sapportals.wdf.element.PanesElement.createStartPaneStack(PanesElement.java:55)
     at com.sapportals.wdf.config.WdfConfiguration.createPageStack(WdfConfiguration.java:175)
     at com.sapportals.wdf.ControllerDynPage.doInitialization(ControllerDynPage.java:224)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:94)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:64)
     at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:32)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sapportals.wcm.app.servlet.WcmHtmlbBaseServlet.service(WcmHtmlbBaseServlet.java:81)
     at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:283)
     at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:143)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:195)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:209)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:589)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:143)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:195)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:644)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:209)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:532)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:147)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:792)
     at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:658)
     at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:305)
     at com.inqmy.services.httpserver.server.Response.handle(Response.java:166)
     at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1153)
     at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
     at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:153)
javax.servlet.ServletException: com.sapportals.wcm.control.quickpoll.QPUserControl
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:75)
     at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:32)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sapportals.wcm.app.servlet.WcmHtmlbBaseServlet.service(WcmHtmlbBaseServlet.java:81)
     at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:283)
     at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:143)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:195)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:209)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:589)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:143)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:195)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:644)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:209)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:532)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:147)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:792)
     at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:658)
     at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:305)
     at com.inqmy.services.httpserver.server.Response.handle(Response.java:166)
     at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1153)
     at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
     at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:153)
Can anybody guide me in this regard? It seems to be a simple change, but somehow it is not working. Any ideas how to package and deploy this file on the Portal server?

Hi Vishal,
In the Quick Poll admin iview, make sure that you have started the poll.
Also check the Radio buttons for displaying the result.There are 3 options.
Select the one with either displaying the poll after users voted or displaying the poll after the poll is closed.
Hope it helps.

Error encountered while creating a Ratings Quick Poll

Hello,
I tried creating a Quick Poll by selecting the "Rating" option. I attached a sample .txt file I had uploaded, added a question and other details and clicked save. The system returned an error stating that the provided document could not be rated.
Could somebody please help me create a Ratings Quick Poll andl et me know what type of documents I can rate and how to go about the whole process?
Thanks and Regards,
Farsheed

Hi Farsheed,
You always link a rating with a document. A link to the document in question is always displayed in the quick poll iView. You define a question but no answers. A rating scale is displayed in the iView as you defined in the configuration of Content Management.
http://help.sap.com/saphelp_nw04/helpdata/en/8b/47c43d99243851e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/c1/47c43d99243851e10000000a114084/frameset.htm
If helps plz award points
cheers
dev

Quick Poll Show History

Hi SDN,
We are using the standard SAP Quick Poll iview in our site. In the End User Part, there is a button which displays 'Show History' which takes us back to the previous polls. We donot want this feature to be part of the end user screen. I tried removing it by deleting the history folder under the particular campaign, but still when i am creating a new quick poll - A new history folder is created to accomadate the older poll.
How to get rid of the Show History option??
Thanks & Regards,
Ganesh N

Ganesh,
This thread might be handy.
https://www.sdn.sap.com/irj/scn/thread?messageID=6611005#6611005
Cheers,
Sandeep Tudumu

Automatic reset of Quick Poll

Hi you all!
We are going to implement the Quick Poll iView in our local Portal as a tool to decide where to go for lunch. I know, not the most exciting use for it, but it will come in handy for us since we are located in different part of our town. And it will hopefully also raise the use of the portal
But there is this one problem: how do you make the poll reset itself automatically like, say, every midnight? Is there a way to do this?
Best regards
Benny

hi
you can use scheduler for this type of work just use quick poll administrator iview for scheduling and quick poll iview for end user .hope this will help you just a work arround both this iviews are available in content provided by SAp/specialist/com.sap.km ..../iviews.just have a work arround.
withy regards
subrato kundu
please don,t forget to give points

User Details from Quick Poll

Hello Experts,
I have created a quick poll and it's ongoing. Now, is there a way to capture the user ids of the voters who ever participated in the poll?
Please help.
BR,
Raghava

Hi Raghava,
There is no standard way to capture the user ids of the users who have participated in the poll. Users who have participated in the poll will know by checking their quick poll dashbord.
The below thread might help you.
/thread/98430 [original link is broken]
Regards,
Vin

Quick Poll With Anonymous User

Hi All,
Does Quick poll of enterprise portal works with anonymous user. Can anybody suggest me a nice approach for quick poll for anonymous users.
Thanks
Sarang

As long as the quick poll iview that you put into the anonymous user role, has an authentication scheme of anonymous, then it will work fine.
Don't forget to point the iview at the relevant quick poll campaign.
Paul

Quick Poll Greyed Out - unable to edit

Hello,
We have a series of quick polls assigned to individual campaigns and all are 'ongoing'. These are then assigned to KM IViews and assigned to users via roles etc.
Last week we were able to edit the quick poll, editing the text, participants etc but for some reason we are now unable to.
I've logged in as administrator and checked permissions etc but still unable to edit.
There are no locks pending in the portal.
any idea what the issue could be?
thanks
Simon.

Hi ezadler,
Did this issue only haapen to this one particular list?
Please check if there are more related ULS logs in 15 hive.
And also try saving this library as a template and create a new libarary based on it, then check if issue still exists, then change the "multiple lines of text" type
Enhanced rich text to
Rich text (even Plain text) if possible, then check again.
Thanks
Daniel Yang
TechNet Community Support

User poll details from Quick Poll

Hi All,
We have a requirement to get the user poll details from KM Quick Poll. From quickpoll admin we can see the poll status and poll result but I want to get poll detals of user like who has voted and to which option he has voted.
Can you suggest me how to get the user details from quickpoll?
Regards
Suresh Bachimanchi
Edited by: Suresh Bachimanchi on Apr 27, 2009 6:13 AM

Hi,
Thanks for your quick response, yes you are correct but I dont want to show one user's information to others. As an administrator I want to track all the details of the user, I want to show all poll details to the administrator not to individual user.
Regards
Suresh Bachimanchi

Quick Poll Runtime Error

Hi,
When I try to Create Quick Poll in KM , I get this error:
Runtime Error
An exception occured while processing the request.
Additional information: null
Exception id: 80fb1672-e162-2a10-8280-c0b2277433de
See the details for the exception ID in the log file
The problem occurs with any administrator account.
Any idea?
Thanks & Regards,
Dilli Kumar

After creting Quick poll
Next, you should modify the Quick Poll iView to show this Quick Poll.
.In the portal, choose Content Administration  Portal Content  Content Provided by SAP - End-User Content  Standard Portal Users  iViews  com.sap.km.iviews  Quick Poll.
Double-click on the iView and Property Editor will open on the right panel.
In the Property Category field, choose Show All.
Modify the value in the property Campaign To Be Used to quick poll name u creted
Save and choose Preview button

Quick Poll! CONCERNING: Water cooling!

Similar Messages

Maybe you are looking for