Quick query about speed

Hi there,
I couldn't find another thread where this would really be suitable, so I thought i'd just make a thread in hopes of a quick answer.
When on Infinity 1, i was synced at the max available which was 37, but download speeds were always 4.4MB/s - I'm sure many of you enjoyed the same.
I've opted for the upgrade to 76/19, and it was activated today. The speed may well change again, but for now my ip profile is set to 65ish - however my download speeds are at 7.9MB/s.
What would the speeds be if I was synced at the max available, just out of curiosity?
Thanks 

I get about 9.8Mbit/s maxed out on an 80meg sync line with a profile of 77.6meg.
Occasionally clips 10. This is using newsgroups.
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

  • Quick question about showing drive space

    Hi,
    Just got a quick query about showing remaining drive space on the desktop.
    Before I wiped my Pismo and reinstalled Tiger (bad kernel panic), my hard drive and any other connected drives (pen drive, iPod, iDisk, etc) showed up on my Desktop with the name and drive capacity and remaining space underneath the icon.
    Now I've reinstalled, the drive capacity and remaining space don't show up on the Desktop, and I can't find how to turn it on. I've been through Preferences several times and can't find an obvious switch. Have I missed something? I'm running Tiger 10.4.8 with the machine spec below.
    Thanks in advance,
    Rob Johnson

    Sometimes, for no obvious reason, the Finder can be slow to update. And sometimes it updates instantly. Why? "Only the Shadow knows...." or maybe the Apple programmers.
    Francine
    Francine
    Schwieder

  • How to implement Quick Query and Saved Searches in ADF?

    We are using 11gR2 ADF.
    The requirement is to enable Quick Search and save the Searches.
    In the Oracle ADF documentation, it is mentioned that
    - Create a view with view criteria named.
    - In the .jspx drag and drop the view criteria and Select Quick Query
    Upon doing the above, we see that a Search panel is getting created, but with a message 'No Search Fields Added'.
    In the named view criteria, Under 'UI Hints' we have set
    -- execution mode as Both
    -- Search region mode is Basic
    -- Show Operators in Basic
    Under 'Criteria Definition'
    the attributes are added in a group with OR condition.
    Thanks for your reply. Oracle ADF developer guide does not help!!
    If you have any other documentation that helps in implementing this Quick Query and Saved Search, your help is greatly appreciated.

    Set the following on your af:query component
    SaveQueryMode = hidden
    ModeChangeVisible = false
    This should work for you ..
    Regards,

  • A quick question about WebDynpro SLD and R/3 with concurrent users

    Hello ,
    I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3  for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
    - I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
    Thanks Ubergeeks,
    Guy

    Hi Guy
    You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because  a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
    For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
    Regards
    Pran

  • How to customize quick query to search with SQL in contain keyword

    I want to build simple query using quick query component. But it will search with SQL equal keyword. How can I customize it to use contain keyword instead. That means, I enter 'sc' to return 'scott'.

    Not sure if the technique described here http://tompeez.wordpress.com/2011/08/21/extending-viewcriteria-to-use-sql-contains-4/ can be used for quick query, but you can try ...
    Timo

  • QUICK QUESTION ABOUT PORTS

    Hi, I have a quick question about port forwarding/mapping. My question, lets say I am running MSN messenger, who's ports are 6880-6900. But lets say I am running a torrent application or something else that requires those ports. If both applications were running at the same time, would this cause interference with them on the same ports or now. Thanks
    Nathan

    Normally, only one application can listen to a specific port number at a time. If MSN is grabbing those 21 ports then your torrent app won't be able to run.
    However, most apps don't work that way - even if they use multiple ports, they don't use them all at the same time, so MSN might use 6880 when it starts up, leaving the others open for other applications to use if needed.
    Only experimentation will answer that one.

  • Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

     

    Make sure that your bean is implementing the serializable interface and that
    you are accessing the bean from the session with the same name.
    Bryan
    "Sandeep Suri" <[email protected]> wrote in message
    news:[email protected]..
    Hi, I have quick question about use of USEBEAN tag in SP2. When I
    specify a scope of SESSION for the java bean, it does not keep the
    values that I set for variable in the bean persistent.Thanks,Sonny
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • Query about local storage

    Hi,
         i had a query about local storage.
         I've a machine that hosts weblogic and tangosol. i've an ejb that accesses a distributed cache i.e NamedCache cache = CacheFactory.get("MyCache")
         i modified tangosol-coherence.xml and set local-storage to false ( for distributed cache) and replaced the file in coherence.jar.
         i'm using an overflow scheme and the back map uses a disk scheme.
         i also start a separate standalone instance of tangosol and i set the system property of local storage to true for the standalone instance.
         i start the standalone instance first and then weblogic.
         The idea is ensure that the tangosol instance in weblogic or the weblogic JVM should not participate in storing data (hence local storage false).
         only the JVM for the standalone instance should store data (hence local storage true -system property).
         i wanted to know whether the property "local-storage" is pertinent to a member(machine) or to a JVM?
         the reason for this doubt: as i'm using a disk scheme, tangosol creates a file for an overflow (e.g lh014402~.tp). i can see two such files when ideally i would have wanted only one for the tangosol instance.
         -rw-r--r-- 1 zephyr users 8364032 2005-06-23 17:02 lh014402~.tp
         -rw-r--r-- 1 zephyr users 8364032 2005-06-23 17:02 lh014403~.tp.
         can you please let me know if we can configure tangosol in such a way that we can two separate instances running with local stroage false for one and true for the other?
         Awaiting your reply
         Thanks
         Vinay

    I would suggest leaving the default 'local-storage' value set to 'true' in the tangosol-coherence.xml and just use the JVM argument to control the local storage of each individual node. Then start the stand alone instance normally (I assume you are using the com.tangosol.net.DefaultCacheServer) and start the WebLogic instance with the following:
         java [...] -Dtangosol.coherence.distributed.localstorage=false [...]
         Hope this helps.
         Later,
         Rob Misek
         Tangosol, Inc.

  • Oracle ADF - Refresh quick query for a table in the pop up.

    Hi,
    I am using Oracle jDev 11.1.1.4.0
    In my application I have a Find button in jspx.
    Onclick of Find button, a popup opens.
    When I search for a record by name in QuickQuery, suppose - I entered name as jon.
    It gives me the correct result.
    Now when I close the pop up and again click on Find button, that previous search remains as it is in the pop up
    and also the previous criteria in quick query search region as "jon".
    I have changed the refresh property of iterator(of table in popup) in pageDef
    But still not working...
    How to refresh that search region for every subsequent Find click.
    Appreciate your help.
    Thanks,
    Madhav

    do u changed refresh > ifneeded or always.
    user.
    r u luking for partially page rendering.
    by using ppr. we can refresh.
    if so.
    http://www.adftips.com/2010/10/adf-ui-refreshing-page-or-region.html
    http://biemond.blogspot.com/2007/11/how-to-refresh-region-in-jdeveloper-11g.html
    Re: ADF Region Interaction
    Edited by: Erp on Sep 27, 2011 4:37 AM
    Edited by: Erp on Sep 27, 2011 4:42 AM

  • Big Troubles on designing Query about special customers' counting

    Hello buddies:
    I meet a problem on designing Query about special customers' counting. Let me describe the requirment first.  I want to create a query with BEX , and there is a key figure with very special logic.
    That is: to list the counts of the customers which has more than one sales records in a time period from sales data. 
    For example :
    when the user excute the query , he or she must input a time period ( 2007.01~2007.03 e.g)
    then the query output as follow:
    District          Cust-sount
    North-Zone       100
    South-Zone      120
    The Main trouble are :
    1. Threr are no document number in the detail of sales data document records. so I could not count the sales times with document number.
    2. The time period is not fixed value, it depends on the user's input, so I can not define the counting logic in the update rule or in the query with fixed time period.
    Anybody who met similar requirement pls show me your hand and give your solutions, thanks very much.
    Jason

    Hi,
        Your solution sounds a good way to count the distinct customers. but in my case, one salse line item must not be recognize as one sales record, instead,  one customer's all sales line items occurs in one day must be  recognize as one sales record ( or we say that one sales behavior).
    for example:
    customer     product    quantity   date
    cust001       prod001        10       2007.06.06
    cust001       prod002        20       2007.06.06
    the two line items above means one sales record for the customer "cust001".
    so I could not simply use the CKF : (( Counter ) *FV2 ) > 1 .
    Best Regards,
    Jason

  • Query about licensing Jdeveloper

    Dear Friends,
    I have a query about licensing of Jdeveloper development tool. I understand that Jdeveloper is Free tool.That is we do not require license to use Jdeveloper for development as well as production.
    Recent I heard that Jdeveloper is free only if we purchase Oracle Application Server. Is it correct ? Does one need to purchase Jdeveloper license if it is being deployed on any other App. server eg. Jboss etc ?
    Can anyone throw light on the same ?
    Many thanks,
    Vaij

    Hi,
    JDeveloper is free! Oracle ADF - the binding layer - ADF BC, and ADF Faces need an OracleAs licence
    Frank

  • New issue in R 12.1.3 in AP while query about inovice was recorded in AP

    i record new invoice in ap on release R 12.1.3 and when query about it on invoice form the error appeare was it
    forms
    FRM-40735:POST-QUERY trigger raised unhandled exception ORA-04063
    how can someone help us

    Hi,
    Please see these docs.
    R12:Getting FRM-40735 Post-Query Trigger On Quering Invoice [ID 1209736.1]
    After Applying Patch APXINWKB.fmb Is Not Working [ID 1159124.1]
    R12.1.1 APXINWKB Invoice Workbench Form Comes Up With 'ORA-01403' [ID 949942.1]
    12.1.1: FRM-40735: Post-Query Trigger Raised Unhandled Exception ORA-04063 [ID 1077613.1]
    Query on Invoices, Getting "FRM-40735: POST-QUERY trigger raised unhandled exception ORA-4063" [ID 1076609.1]
    Thanks,
    Hussein

  • Using quick query component

    hi,
    I am using quick query component. There is any way to show in the combo box of the quick query component only some and not all fields, because I do not need to display all.
    Please..

    Vane,
    If you're using ADF Business Components - I believe you can do this by creating a named view criteria on your View Object and then dragging-and-dropping the named view criteria on to the page as an af:quickQuery - haven't tested this personally, though.
    A really quick test - no more time today - seems to show that named view criteria can create an af:query, but I didn't see af:quickQuery as an option...
    Time to read the Fusion Developer's Guide, I guess.
    John

  • A quick query wanted

    I have a view with columns and data like:
    UNIT STATUS CASES
    001 complete 38
    001 on-going 32
    001 total 70
    002 complete 10
    002 on-going 47
    002 total 57
    Can anyone give me a quick query to make the report as:
    UNIT Comlete on-going total cases
    001 38 32 70
    002 10 47 57
    Thanks

    SQL> -- generating sample data:
    SQL> with t as (
      2  select '001' unit, 'complete' status, 38 cases from dual union all
      3  select '001', 'on-going', 32 from dual union all
      4  select '001', 'total', 70 from dual union all
      5  select '002', 'complete', 10 from dual union all
      6  select '002', 'on-going', 47 from dual union all
      7  select '002', 'total', 57  from dual
      8  )
      9  --
    10  -- actual query:
    11  --
    12  select unit
    13  ,      max(case when status = 'complete' then cases end ) "complete"
    14  ,      max(case when status = 'on-going' then cases end) "on-going"
    15  ,      max(case when status = 'total' then cases end) "total"
    16  from   t
    17  group by unit
    18  order by unit;
    UNI   complete   on-going      total
    001         38         32         70
    002         10         47         57
    2 rows selected.

  • How to create quick query region?

    Hi,
    How to create quick query region?
    I have got some tip from OAF developer guild:
    OAPageLayoutBean pageLayout = pageContext.getPageLayout();
    pageLayout.setQuickSearch(quickSearchRN);
    But I don't know how to create 'quickSearchRN'.
    So, I try to create a stacklayout region as quickSearchRN, and add it into pageLayout.
    But there are two stacklayout region displayed. One in qucik query region, other in main region.
    please give me some sample code.

    OAFlowLayoutBean quickQueryRN = (OAFlowLayoutBean)createWebBean
    (pageContext,OAWebBeanConstants.FLOW_LAYOUT_BEAN, null, "QuickQueryRN");
    OAMessageTextInputBean condition = (OAMessageTextInputBean)createWebBean
    (pageContext,OAWebBeanConstants.MESSAGE_TEXT_INPUT_BEAN, null, "condition");
    condition.setPrompt("Name");
    quickQueryRN.addIndexedChild(condition);
    pageLayout.setQuickSearch(quickQueryRN);

Maybe you are looking for