Quick question about Cisco 9951

Hi Guys,
I'm not a VOIP guy so apologies if this is a simple question. I have a couple of Cisco 9951 phones and wanted to know if there is a way to manually setup the Call Manager ( Active Server) IP address?
I've looked through the menu on the phone but I can't seem to see it as an option.
Does it have to be configured for DHCP with option 150, or a tftp server directly to get the configuration details?
cheers.

Nope, no battery. If the behavior is consistent every reboot, you might have a defective NVRAM, this is assuming you are saving the config, this is a 2948G-L3, so it must be saved, if it's a 2948G, then it's a switch and running CatOS and therefore any configuration changes gets saved in the NVRAM as soon as you press the enter key after a "set" commmand.
Please rate all posts.

Similar Messages

Quick Question about Cisco 3560 and the Web Device Manager

Alright, I have a quick question that I am curious about but I haven't found any information
about it.
When I log into my Cisco 3560 using the web portal to get to the Device Manager. Below the
diagram of the switch, then under the Dashboard there is section called Switch
Health, Port Utilization.
Under the Switch Health there is Bandwidth Used, Packet Error. Those two options just sit
at zero and do not move. The Port tilization graph is also sitting at zero.
Is there a way to make them functional?

Anyone notice performance increase or decrease of their HD when using the nVidia IDE SW drivers? particularly with a 74GB Raptor? I've also heard of burner issues when installing the IDE SW but have not used my burner yet.

A quick question about WebDynpro SLD and R/3 with concurrent users

Hello ,
I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3 for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
- I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
Thanks Ubergeeks,
Guy

Hi Guy
You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
Regards
Pran

QUICK QUESTION ABOUT PORTS

Hi, I have a quick question about port forwarding/mapping. My question, lets say I am running MSN messenger, who's ports are 6880-6900. But lets say I am running a torrent application or something else that requires those ports. If both applications were running at the same time, would this cause interference with them on the same ports or now. Thanks
Nathan

Normally, only one application can listen to a specific port number at a time. If MSN is grabbing those 21 ports then your torrent app won't be able to run.
However, most apps don't work that way - even if they use multiple ports, they don't use them all at the same time, so MSN might use 6880 when it starts up, leaving the others open for other applications to use if needed.
Only experimentation will answer that one.

Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Basic questions about CISCO IOS

Hi everybody, Jack here,
I have some basic questions about the Cisco IOS, could someone help me addressing some of them please? Any feedback would be greatly appreciated.
Basically, I have two IP addresses assigned by our Cable ISP. From what I understood you can configure a Cisco router for multiple IP addresses using the IOS, thereby allowing someone like myself to take advantage of having multiple IP addresses. This may seem unnecessary to some, but I've always wanted to put the 2nd IP address to use, since after all, I've been paying for it.
I was just wondering if someone could confirm that what I'm hoping to accomplish is indeed within the capability of the Cisco IOS (i.e. Fully utilize my 2 IP addresses). As well, if someone could kindly suggest a decent CISCO router for online gaming home use that would be super awesome!
Thank you all so much for reading through the wall of text:)
Jack

Jack
Certainly using multiple IP addresses is in the capability of Cisco IOS routers. How they can be used depends on the relationship of the IP addresses. I am assuming that we are talking about IP addresses assigned for the user to use and that the IP address for the ISP connection is not one of these that we are talking about.
If both of the IP addresses that you have been assigned are within the same subnet then you would assign one of the addresses to the router interface to establish IP communication between the router and the ISP and to enable Internet connectivity for the devices inside your network that will use the router as their gateway to the Internet. The other address that is assigned can be used for address translation and in particular for static address translation which would make one of your devices inside to be reachable for connections initiated from the Internet (if that is something that you might want to do).
If the addresses that are assigned to you are in different subnets then you could assign one address to the outside router interface and assign the other address to the router inside interface. Or you could use the second address for address translation.
I do not have much expertise with online gaming, but I would think that either the Cisco 881 router or the 890 router might be appropriate for you. If 100 Mb connection is sufficient then probably the 881 would be the one to look at. If you need Gig connection then look at the 890.
HTH
Rick

IMovie - quick questions about video files when importing and optimizing

Hi, have some quick questions. I think they are simple.
1. When I import a video (from say iPhoto), where does it get "Move" or "Copy" to?
2. Why would I want to do "Copy" instead of "Move", because isn't it then taking up more space?
3. I'm wondering if after I optimize a video, I can stash away the original (non-optimized video that I either "Move"d or "Copy"d earlier) into an external hd.
4. By the way, what is the new file name of the optimized video?
Though things are working fine in iMovie and iPhoto, I'm trying to manage hard disk space, and hope answers to these questions will help.
Do you guys have a guideline on how to manage hard disk space when it comes to iphoto and imovie?
Thanks.

As has been suggested you can encourage people to download QuickTime player by doing something like this...
http://www.mirroroftheuniverse.com/Songs.html
You can also present your songs like this...
http://roddymckay.com/Satellite/JukeBox.html
This is a SnoCap jukebox and you need an account to use it but you'll get the link to ESnips on the above page.
A 3 minute song has a file size of about 30 Mb in AIFF format. Converting it to MP3 reduces it to about 3.5 Mb and M4A to about 5.5 Mb.
iTunes will do these conversions for you and M4A is far superior to MP3 as far as sound quality is concerned.

Some question about Cisco Prime Infrastructure

Dear all
I have some question about using Cisco prime Infrastructure:
- Can I show how many user access to one Access Point (AP) ?
- If I can. What is display information of user ? etc Ip address, MAC, username access, name of device (notebook, tablet, phone ..)
- How many time do Cisco Prime Infrastructure refesh user informantion .?
Please help me and send picture about it if you can.
Thank you so much.

Hi,
I don't have the Prime Infrastructure to post you image, but you can simply find all the answers you want on the config guide:
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/clientmgmt.html#wp1232242
1- You can surely find how many clients associated to a specific AP.
- Informaiton of the client usually includes username, SSID, ip address, mac address, RSSI, device vendor...etc. I don't think it contains the device type (ipad or iphone both appear as apple vendor. it does not destinguish between this and that.
3- The time of the refreshment is configurable. You need to configure the corresponding background task for the poll period. (this is also metnioned in the link above).
HTH
Amjad
Rating useful replies is more useful than saying "Thank you"

Two quick questions about Library after moving beginning on a new computer

Hi there,
I just moved from Windows to Mac, meaning I had to move my iTunes library from the old PC to my new MBA.
Just a couple of quick questions.
1. When I started iTunes on my new Mac, in the preferences I directed the media folder to the folder with all my itunes music/podcasts etc, and then I imported the Library XML file. Is this incorrect? Should I have imported a different file? Should I have used the itl file instead?
If so, should I delete the library and start again? (if this is the case, please suggest the best way of doing this without affecting my media)
- a kind of sub-question to this one: some of the media files arent showing up in the iTunes library, but they are in the media folder on the ext HDD. Is there a way I can find out which ones havent been recognized by iTunes? Whats the best way of getting them in to my library?
2. Pretty much half of my podcasts have not been loaded in the new iTunes. The ones that havent were ones that I subscribed to on my iPhone, whereas the ones that show up in iTunes were ones I downloaded from iTunes. When I connect my iPhone and sync it with iTunes, will those podcasts show up in iTunes? Or is there a risk that they will be deleted from my iPhone?
Cheers,

The .xml is lacking some information such as ratings, date added, and play count. Using the .itl includes this information but cannot be imported using the method you did.
A complete library is everything in the iTunes folder. By using the method you did you left the artwork behind in the artwork folder on the other machine.
Selecting the media folder in preferences does not get iTunes to recognize the media. All it does is tell iTunes to start storing new media in that location.
Using the method I outlined nothing will be missed (with the exception of WMA) because you aren't rebuilding your library, you are using the one that already exists.
You don't have to re-copy everything as long as you get the stuff you missed and re-assemble it all as it was before except not on the Mac.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391

Quick question about Quicktime media keys.......

I had a question about encoding video and media keys. It seems to me that the only codec that allows you to encode it with a media key is Sorenson (Sorenson 3 I think). Why are they the only ones that are enabling that in their codecs? Is it kind of a dying technology or practice? I've experimented with Sorenson 3 and Sorenson Squeeze trials and, even though it looks ok, it simply doesn't stack up to others like Apple's H.264 or open-source x264 or even Xvid. I guess I wish there were a way to be able to use media key options with all the new H.264 codecs. Is it possible to do that, either with Xcode or AppleScript? Any help would be greatly appreciated!!

QuickTime has supported 'media keys" since version 3 but you can only add them using the third party software.
You would be better served by contacting Sorenson and asking them about their support for newer codecs.

Quick Question about fade effect

Quick Question:
If I wanted to add a Fade Effect from one state to another
when a button is pressed.
How would I do that within the code?

quote:
Originally posted by:
atta707
You can do something like on the click of the button:
var fader:Fade = new Fade(targetUIComponent);
fader.duration = 1000;
fader...;
fader.play();
or listen for currentStateChanging event and write the same
similar code.
or define transitions from one state to another like:
<mx:Transition id="toOneOnly" fromState="*"
toState="OneOnly">
<mx:Sequence id="t1" targets="{[p2]}">
<mx:Iris showTarget="false" duration="350"/>
<mx:SetPropertyAction name="visible"/>
<mx:SetPropertyAction target="{p2}"
name="includeInLayout"/>
</mx:Sequence>
</mx:Transition>
Hey,
I would like to use the "transition from one state to
another", but if you can explain each part for me that would be
helpful.
If you can comment on each line of that code that would help
thanks

Quick question about showing drive space

Hi,
Just got a quick query about showing remaining drive space on the desktop.
Before I wiped my Pismo and reinstalled Tiger (bad kernel panic), my hard drive and any other connected drives (pen drive, iPod, iDisk, etc) showed up on my Desktop with the name and drive capacity and remaining space underneath the icon.
Now I've reinstalled, the drive capacity and remaining space don't show up on the Desktop, and I can't find how to turn it on. I've been through Preferences several times and can't find an obvious switch. Have I missed something? I'm running Tiger 10.4.8 with the machine spec below.
Thanks in advance,
Rob Johnson

Sometimes, for no obvious reason, the Finder can be slow to update. And sometimes it updates instantly. Why? "Only the Shadow knows...." or maybe the Apple programmers.
Francine
Francine
Schwieder

Quick question about sim transfer

Hi all,
I have a quick question and hopefully one of you guys would be able to help me. My friend purchased his 3g iphone today and hes giving me his old iphone. I currently have a blackjack and I wanted to take the sims card from the blackjack and put into the original iphone. Will the iphone work with my sims card? It is an older sims card, says 64k on it. If not, would I have to bring it into at&t and get it activated w/a different sims card? Hopefully all this isnt confusing. Thanks for any help. Cheers!

You're welcome.
I guess that also means I would have to upgrade to the 20 dollar data plan without the text messages as well?
The unlimited data plan for the first generation iPhone still costs $20/mo and includes 200 SMS. The only thing you need to get from an at&t store is a new SIM card. Take the iPhone with you telling them what you plan on doing and they should give you a new SIM card at no cost.
You will activate this iPhone with iTunes on your computer. If you are an existing subscriber, your calling plan will transfer to the iPhone, and any existing data plan you are using with your current phone will be cancelled. If you are an existing subscriber, your only selection will be the $20/mo unlimited data plan which includes 200 SMS, and you can select 1,500 SMS for an additional $10/mo or have unlimited SMS for an additional $20/mo.

Quick question about iMovie

I have a question about iMovie. I've used Final Cut Pro before using iMovie, and FCP allowed the user to play two video/images on top of each other. You could play with the opacity and the duration very easily.
I'm wondering, can you do the same thing with iMovie? I'll be VERY disappointed if you can't do it.
iBook G4

Hi
And You could take a look at the plug-ins to iMovie.
- Stupendous software http://www.stupendous-software.com
- GeeThree http://www.geethree.com
- cf/x. http://www.imovieplugins.com
and possibly more.
QT-pro can do this as said above - but You need to be very precise.
But I would do this in FCP and then export as QT.mov to do the rest in iMovie
if necessary.
Yours Bengt W

Quick question about RegExp

Just a quick question.
In other languages, I can do this...
while(reg.exec(string)) {
//loop through results
And while looping, I can access the current match with something like reg.Match or whatever.
Is this possible in AS?

Look up the RegExp class.

Quick question about Cisco 9951

Similar Messages

Maybe you are looking for