Quick question about cpu cooler

i just orderd the things in my sig and i wonder if the zalman cpu cooler works on the hot peice of hardware that the K8N Neo 2 is? my biggest concern is the corsair memory sticks which might be too large to "work" with the cooler. all help is appriceated

thanks pitbull! now i only have to get the things then i am all set up and ready too go. now i just hope that i get the Zalman with the "working" backplate and that slight littel problem that the fan is a tad heavy so i wonder if i have to be special carefull when go too lans with that huge thing hanging on my cpu, hopefully it will work. Thanks again

Similar Messages

A quick question about WebDynpro SLD and R/3 with concurrent users

Hello ,
I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3 for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
- I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
Thanks Ubergeeks,
Guy

Hi Guy
You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
Regards
Pran

QUICK QUESTION ABOUT PORTS

Hi, I have a quick question about port forwarding/mapping. My question, lets say I am running MSN messenger, who's ports are 6880-6900. But lets say I am running a torrent application or something else that requires those ports. If both applications were running at the same time, would this cause interference with them on the same ports or now. Thanks
Nathan

Normally, only one application can listen to a specific port number at a time. If MSN is grabbing those 21 ports then your torrent app won't be able to run.
However, most apps don't work that way - even if they use multiple ports, they don't use them all at the same time, so MSN might use 6880 when it starts up, leaving the others open for other applications to use if needed.
Only experimentation will answer that one.

Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Question about CPU temperature

Hi, I have just built a new system with the following,
Motherboard - MSI 760GM-P23 (FX)
CPU FX 6300
and as this is my first venture over to the AMD side of PC's I have some questions about the CPU temp.
The image below is from my system under load, I'm told that the temp readings from AMD CPU's are not accurate below 40c?
The FX 6300 'package temp' cant be accurate with a low of 13c it's simply not possible in a room that's almost 20c.
What is TMPIN1? I hope that's not my actual CPU temp as 69c is way to high. and a Google search for TMPIN1 brings up lots of forum posts regarding MSI boards, Hence my post here.
TMPIN0 looks like the most likely sensor for CPU temp but I'm just not sure, so which one is it? and where is TMPIN1 reading it's info from?
Regards and many thanks, Dave

What you see with HWINFO is the readings from two different sources. One is the reported temp by the AMD sensor, the other is the same temp but as reported and translated by the Fintek chip that MSI generally uses on their boards.
The differences in readings boils down to the digital signal to analog conversion by the two data suppliers, .i.e AMD sensor/Fintek chip.
If in doubt, always use the higher reported temp as the acceptable one. Quite frankly, I would think what the Fintek reports is probably close to what the real temps are. Common sense will dictate that what you see from the AMD sensor is virtually impossible unless you use liquid cooling.
Also remember that the software in use may differ in readings slightly.
The Fintek chip is reporting 2 CPU temps. I summise the higher as being the CPU core and the lower value as being a sensor in the vicinity of the CPU that MSI has added.
Comparing the info with your HW Monitor, I further believe that TMPIN1 is the same as the Fintek CPU higher temp. TMPIN2 is the one for the lower CPU value in HWINFO and TMPIN0 is probably your southbridge.
If you wish, run both these software packages at the same time and stress your machine in Prime95, Then you can monitor and figure out which ones are going up or down in unison. You may also find that the temps will be a lot closer then.

Quick Question about Cisco 3560 and the Web Device Manager

Alright, I have a quick question that I am curious about but I haven't found any information
about it.
When I log into my Cisco 3560 using the web portal to get to the Device Manager. Below the
diagram of the switch, then under the Dashboard there is section called Switch
Health, Port Utilization.
Under the Switch Health there is Bandwidth Used, Packet Error. Those two options just sit
at zero and do not move. The Port tilization graph is also sitting at zero.
Is there a way to make them functional?

Anyone notice performance increase or decrease of their HD when using the nVidia IDE SW drivers? particularly with a 74GB Raptor? I've also heard of burner issues when installing the IDE SW but have not used my burner yet.

IMovie - quick questions about video files when importing and optimizing

Hi, have some quick questions. I think they are simple.
1. When I import a video (from say iPhoto), where does it get "Move" or "Copy" to?
2. Why would I want to do "Copy" instead of "Move", because isn't it then taking up more space?
3. I'm wondering if after I optimize a video, I can stash away the original (non-optimized video that I either "Move"d or "Copy"d earlier) into an external hd.
4. By the way, what is the new file name of the optimized video?
Though things are working fine in iMovie and iPhoto, I'm trying to manage hard disk space, and hope answers to these questions will help.
Do you guys have a guideline on how to manage hard disk space when it comes to iphoto and imovie?
Thanks.

As has been suggested you can encourage people to download QuickTime player by doing something like this...
http://www.mirroroftheuniverse.com/Songs.html
You can also present your songs like this...
http://roddymckay.com/Satellite/JukeBox.html
This is a SnoCap jukebox and you need an account to use it but you'll get the link to ESnips on the above page.
A 3 minute song has a file size of about 30 Mb in AIFF format. Converting it to MP3 reduces it to about 3.5 Mb and M4A to about 5.5 Mb.
iTunes will do these conversions for you and M4A is far superior to MP3 as far as sound quality is concerned.

[SOLVED] Question about CPU temperature

Hi everybody,
I just want to ask a question about "standard" CPU temperatures because my laptop (a Dell Vostro 3700) is permanently hot with the fans on even when I am not doing anything special.
I have CPU freq scaling active with the conservative governor, and I use Gnome Shell 3.2 with an nVidia using the nouveau driver.
Here are "stable" temperatures while writing this post:
# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +72.5°C (crit = +103.0°C)
nouveau-pci-0100
Adapter: PCI adapter
temp1: +78.0°C (high = +100.0°C, crit = +110.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +73.0°C (high = +95.0°C, crit = +105.0°C)
Core 2: +73.0°C (high = +95.0°C, crit = +105.0°C)
And this is the output of mpstat
# mpstat -P ALL
Linux 3.1.6-1-ARCH (fm) 01/04/2012 _x86_64_ (4 CPU)
10:16:50 PM CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle
10:16:50 PM all 1.59 0.18 0.54 0.02 0.00 0.02 0.00 0.00 97.65
10:16:50 PM 0 1.88 0.15 0.72 0.02 0.00 0.01 0.00 0.00 97.22
10:16:50 PM 1 1.64 0.21 0.40 0.02 0.00 0.01 0.00 0.00 97.73
10:16:50 PM 2 1.47 0.15 0.67 0.02 0.00 0.06 0.00 0.00 97.64
10:16:50 PM 3 1.36 0.20 0.39 0.02 0.00 0.01 0.00 0.00 98.01
The fan, of course, is full speed (very annoying)
I think that these temperatures are quite high, but I don't know what's really causing all this heating because my laptop is basically idle.
Any suggestion?
Thanks.
P.S.: Running Linux fm 3.1.6-1-ARCH #1 SMP PREEMPT Thu Dec 22 09:11:48 CET 2011 x86_64 Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz GenuineIntel GNU/Linux
Last edited by fm (2012-01-06 09:32:01)

samuvuo wrote:
fm wrote:Just to wrap up this topic, I "solved" the issue by adding these parameters to the kernel:
Just curious: what are the temperatures now? Sensors output after the "fix" would be nice.
It's in the previous posts:
Before (idle)
# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +72.5°C (crit = +103.0°C)
nouveau-pci-0100
Adapter: PCI adapter
temp1: +78.0°C (high = +100.0°C, crit = +110.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +73.0°C (high = +95.0°C, crit = +105.0°C)
Core 2: +73.0°C (high = +95.0°C, crit = +105.0°C)
After (idle)
acpitz-virtual-0
Adapter: Virtual device
temp1: +63.5°C (crit = +103.0°C)
nouveau-pci-0100
Adapter: PCI adapter
temp1: +68.0°C (high = +100.0°C, crit = +110.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +62.0°C (high = +95.0°C, crit = +105.0°C)
Core 2: +64.0°C (high = +95.0°C, crit = +105.0°C)
After (after playing 8 min youtube video)
acpitz-virtual-0
Adapter: Virtual device
temp1: +74.5°C (crit = +103.0°C)
nouveau-pci-0100
Adapter: PCI adapter
temp1: +78.0°C (high = +100.0°C, crit = +110.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +73.0°C (high = +95.0°C, crit = +105.0°C)
Core 2: +75.0°C (high = +95.0°C, crit = +105.0°C)
Fan spinning is better (less noisy) after specifying the kernel parameters.
Thanks
Last edited by fm (2012-01-06 13:43:05)

Two quick questions about Library after moving beginning on a new computer

Hi there,
I just moved from Windows to Mac, meaning I had to move my iTunes library from the old PC to my new MBA.
Just a couple of quick questions.
1. When I started iTunes on my new Mac, in the preferences I directed the media folder to the folder with all my itunes music/podcasts etc, and then I imported the Library XML file. Is this incorrect? Should I have imported a different file? Should I have used the itl file instead?
If so, should I delete the library and start again? (if this is the case, please suggest the best way of doing this without affecting my media)
- a kind of sub-question to this one: some of the media files arent showing up in the iTunes library, but they are in the media folder on the ext HDD. Is there a way I can find out which ones havent been recognized by iTunes? Whats the best way of getting them in to my library?
2. Pretty much half of my podcasts have not been loaded in the new iTunes. The ones that havent were ones that I subscribed to on my iPhone, whereas the ones that show up in iTunes were ones I downloaded from iTunes. When I connect my iPhone and sync it with iTunes, will those podcasts show up in iTunes? Or is there a risk that they will be deleted from my iPhone?
Cheers,

The .xml is lacking some information such as ratings, date added, and play count. Using the .itl includes this information but cannot be imported using the method you did.
A complete library is everything in the iTunes folder. By using the method you did you left the artwork behind in the artwork folder on the other machine.
Selecting the media folder in preferences does not get iTunes to recognize the media. All it does is tell iTunes to start storing new media in that location.
Using the method I outlined nothing will be missed (with the exception of WMA) because you aren't rebuilding your library, you are using the one that already exists.
You don't have to re-copy everything as long as you get the stuff you missed and re-assemble it all as it was before except not on the Mac.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391

Quick question about Quicktime media keys.......

I had a question about encoding video and media keys. It seems to me that the only codec that allows you to encode it with a media key is Sorenson (Sorenson 3 I think). Why are they the only ones that are enabling that in their codecs? Is it kind of a dying technology or practice? I've experimented with Sorenson 3 and Sorenson Squeeze trials and, even though it looks ok, it simply doesn't stack up to others like Apple's H.264 or open-source x264 or even Xvid. I guess I wish there were a way to be able to use media key options with all the new H.264 codecs. Is it possible to do that, either with Xcode or AppleScript? Any help would be greatly appreciated!!

QuickTime has supported 'media keys" since version 3 but you can only add them using the third party software.
You would be better served by contacting Sorenson and asking them about their support for newer codecs.

Quick Question about fade effect

Quick Question:
If I wanted to add a Fade Effect from one state to another
when a button is pressed.
How would I do that within the code?

quote:
Originally posted by:
atta707
You can do something like on the click of the button:
var fader:Fade = new Fade(targetUIComponent);
fader.duration = 1000;
fader...;
fader.play();
or listen for currentStateChanging event and write the same
similar code.
or define transitions from one state to another like:
<mx:Transition id="toOneOnly" fromState="*"
toState="OneOnly">
<mx:Sequence id="t1" targets="{[p2]}">
<mx:Iris showTarget="false" duration="350"/>
<mx:SetPropertyAction name="visible"/>
<mx:SetPropertyAction target="{p2}"
name="includeInLayout"/>
</mx:Sequence>
</mx:Transition>
Hey,
I would like to use the "transition from one state to
another", but if you can explain each part for me that would be
helpful.
If you can comment on each line of that code that would help
thanks

Quick question about showing drive space

Hi,
Just got a quick query about showing remaining drive space on the desktop.
Before I wiped my Pismo and reinstalled Tiger (bad kernel panic), my hard drive and any other connected drives (pen drive, iPod, iDisk, etc) showed up on my Desktop with the name and drive capacity and remaining space underneath the icon.
Now I've reinstalled, the drive capacity and remaining space don't show up on the Desktop, and I can't find how to turn it on. I've been through Preferences several times and can't find an obvious switch. Have I missed something? I'm running Tiger 10.4.8 with the machine spec below.
Thanks in advance,
Rob Johnson

Sometimes, for no obvious reason, the Finder can be slow to update. And sometimes it updates instantly. Why? "Only the Shadow knows...." or maybe the Apple programmers.
Francine
Francine
Schwieder

Quick question about sim transfer

Hi all,
I have a quick question and hopefully one of you guys would be able to help me. My friend purchased his 3g iphone today and hes giving me his old iphone. I currently have a blackjack and I wanted to take the sims card from the blackjack and put into the original iphone. Will the iphone work with my sims card? It is an older sims card, says 64k on it. If not, would I have to bring it into at&t and get it activated w/a different sims card? Hopefully all this isnt confusing. Thanks for any help. Cheers!

You're welcome.
I guess that also means I would have to upgrade to the 20 dollar data plan without the text messages as well?
The unlimited data plan for the first generation iPhone still costs $20/mo and includes 200 SMS. The only thing you need to get from an at&t store is a new SIM card. Take the iPhone with you telling them what you plan on doing and they should give you a new SIM card at no cost.
You will activate this iPhone with iTunes on your computer. If you are an existing subscriber, your calling plan will transfer to the iPhone, and any existing data plan you are using with your current phone will be cancelled. If you are an existing subscriber, your only selection will be the $20/mo unlimited data plan which includes 200 SMS, and you can select 1,500 SMS for an additional $10/mo or have unlimited SMS for an additional $20/mo.

Quick question about iMovie

I have a question about iMovie. I've used Final Cut Pro before using iMovie, and FCP allowed the user to play two video/images on top of each other. You could play with the opacity and the duration very easily.
I'm wondering, can you do the same thing with iMovie? I'll be VERY disappointed if you can't do it.
iBook G4

Hi
And You could take a look at the plug-ins to iMovie.
- Stupendous software http://www.stupendous-software.com
- GeeThree http://www.geethree.com
- cf/x. http://www.imovieplugins.com
and possibly more.
QT-pro can do this as said above - but You need to be very precise.
But I would do this in FCP and then export as QT.mov to do the rest in iMovie
if necessary.
Yours Bengt W

Quick question about RegExp

Just a quick question.
In other languages, I can do this...
while(reg.exec(string)) {
//loop through results
And while looping, I can access the current match with something like reg.Match or whatever.
Is this possible in AS?

Look up the RegExp class.

Quick question about cpu cooler

Similar Messages

Maybe you are looking for