Quick question about Creative DVD audio pla

Hi all,
I loaded all the drivers and software that came with my Sound Blaster Audigy 2 ZS. The kit came with a DVD audio sampler disc. When I put the DVD audio disc into my computer DVD ROM dri've, it automatically navigates to the Creative Audio DVD player. The only problem is that the "play" button is greyed out. It will not play the disc. It show in the staus window that the sampler disc is there and ready to go. I have tried every button but can not get to play.
Any ideas what I am doing wrong?
Thanks,

Now when I launch the DVD audio player and try to click on a button it just freezes up and have to end the program in task manager

Similar Messages

  • A few quick questions about my new MP3 pla

    Ok, I like to get to know anything I buy so I decided to come here and ask, I hope you dont mind answering (My MP3 player is the MuVo c00):
    ) In the instruction manual it says that play WMA file reduce the battery life of your player. Since converting them reduces the size by a fair bit I was wondering if the reduced battery life was worth it and how much it reduces the battery life.
    2) When is a good time to replace the bettery in my player? Should I wait for it to completly die or what because I dont want to go replacing batteries 3 quarters full.
    3) Is there any sound or quality differences between MP3 format and WMA?
    4) Is the program that came with the player the best thing to add music with or would buying something else do the trick or even just copy and paste?
    5) Finally, how do you attach the neck strap? I dont see any place where it could go unless you have to attach it with the arm band on it.
    Thanks for your help and I might have some more question but untill further notice this is all I have and again thaks for your time.

    . You have to bear in mind this is for an equivalent MP3 e.g. a 28 kbit/s encoded WMA is going to use more power than a 28 kbit/s MP3. Normally WMAs are encoded at a lower rate anyway, hence will use less power. There are many factors that affect battery usage.
    2. Wait for it to go flat.
    3. Complex answer. In general WMA is used when you want more space and aren't so worried about quality, at the 64 - 28 kbit/s range. MP3s (using the LAME encoder) are better at the higher bit-rates of 92 kbit/s. The bottom line is try a few different bit-rates for both MP3 and WMA, take a listen, and decide for yourself.
    4. With the MuVo it's very easy, just use Windows Explorer to copy files. I wouldn't buy any other software, unless you find something you really like to create MP3/WMA files.
    5. Not sure on this one...

  • Quick question about Creative Cloud for students

    Can i use adobe Creative Cloud for students for commercial expressions? I am a student, but i'm also a freelancer in my spare time.
    I'm sorry if this is a stupid question but i can't find the answer on this website…

    As Chromaoran already said - yes.

  • Quick question about burning DVD's from an external HD

    I have an external HD with my current backup on it. Can I burn this backup to DVD's (Dual Layer) and still be able to boot from the DVD's?

    Just a bump

  • A quick question about WebDynpro SLD and R/3 with concurrent users

    Hello ,
    I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3  for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
    - I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
    Thanks Ubergeeks,
    Guy

    Hi Guy
    You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because  a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
    For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
    Regards
    Pran

  • QUICK QUESTION ABOUT PORTS

    Hi, I have a quick question about port forwarding/mapping. My question, lets say I am running MSN messenger, who's ports are 6880-6900. But lets say I am running a torrent application or something else that requires those ports. If both applications were running at the same time, would this cause interference with them on the same ports or now. Thanks
    Nathan

    Normally, only one application can listen to a specific port number at a time. If MSN is grabbing those 21 ports then your torrent app won't be able to run.
    However, most apps don't work that way - even if they use multiple ports, they don't use them all at the same time, so MSN might use 6880 when it starts up, leaving the others open for other applications to use if needed.
    Only experimentation will answer that one.

  • DVD-Audio Pla

    Hi?I have a XtremeMusic card, with the latest drivers installed (and yes I also have the Digiatla i/o problem after rebbot). The problem is I installed the DVD-Audio player. The player plays but there is no sound, if I use the mouse to move along the track I then get sound until I stop moving the mouse. I can play the same Audio-dvd in PowerDVD v7. The dvd is one of the new released REM cds, that include a dvd of the cd in 5. surround sound. So what is the problem with the Creative DVD-Audio player, if on the same hardware other programs can play the audio. I usually don't like having too many programs installed that offer the same feautes, but i just wanted to try out the player, and it should work. I am getting annoyed at the poor quality of the software, I keep on emailing support and all I seem to get are automatted responses with no solutions to my problems.

    Are you using digital speakers? If so, then you will need to switch to the analog outputs for a true DVD-Audio output. The DVD-Audio standard does not allow for digital output and forces analog.
    Your PowerDVD may be picking up a Dolby Digital or other such encoded copy of the music. Many hybrid DVD-Audio disks contain both. True DVD-Audio is not compressed at all and is 6-8 channels of unencoded audio.

  • Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

     

    Make sure that your bean is implementing the serializable interface and that
    you are accessing the bean from the session with the same name.
    Bryan
    "Sandeep Suri" <[email protected]> wrote in message
    news:[email protected]..
    Hi, I have quick question about use of USEBEAN tag in SP2. When I
    specify a scope of SESSION for the java bean, it does not keep the
    values that I set for variable in the bean persistent.Thanks,Sonny
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • Quick Question about Cisco 3560 and the Web Device Manager

    Alright, I have a quick question that I am curious about but I haven't found any information
    about it.
    When I log into my Cisco 3560 using the web portal to get to the Device Manager. Below the
    diagram of the switch, then under the Dashboard there is section called Switch
    Health, Port Utilization.
    Under the Switch Health there is Bandwidth Used, Packet Error. Those two options just sit
    at zero and do not move. The Port tilization graph is also sitting at zero.
    Is there a way to make them functional?

    Anyone notice performance increase or decrease of their HD when using the nVidia IDE SW drivers?  particularly with a 74GB Raptor?  I've also heard of burner issues when installing the IDE SW but have not used my burner yet.

  • IMovie - quick questions about video files when importing and optimizing

    Hi, have some quick questions. I think they are simple.
    1. When I import a video (from say iPhoto), where does it get "Move" or "Copy" to?
    2. Why would I want to do "Copy" instead of "Move", because isn't it then taking up more space?
    3. I'm wondering if after I optimize a video, I can stash away the original (non-optimized video that I either "Move"d or "Copy"d earlier) into an external hd.
    4. By the way, what is the new file name of the optimized video?
    Though things are working fine in iMovie and iPhoto, I'm trying to manage hard disk space, and hope answers to these questions will help.
    Do you guys have a guideline on how to manage hard disk space when it comes to iphoto and imovie?
    Thanks.

    As has been suggested you can encourage people to download QuickTime player by doing something like this...
    http://www.mirroroftheuniverse.com/Songs.html
    You can also present your songs like this...
    http://roddymckay.com/Satellite/JukeBox.html
    This is a SnoCap jukebox and you need an account to use it but you'll get the link to ESnips on the above page.
    A 3 minute song has a file size of about 30 Mb in AIFF format. Converting it to MP3 reduces it to about 3.5 Mb and M4A to about 5.5 Mb.
    iTunes will do these conversions for you and M4A is far superior to MP3 as far as sound quality is concerned.

  • Some questions about creative zen vision m?????????????

    hi, i just have a few questions about the creative zen vision m
    ) what transmitter should i by if i want to listen to my music through the radio?
    2)can the creative zen vision m play music videos and home videos?
    3)can anyone suggest any completey safe music stores i can use to get my music.(last time i downloded a music place to get my music from called share it almost destoyed my comp.
    4) if not would i be able to burn my songs from itunes and use the c.d. to put them on my creative?
    thank you so much i'v looked all over the internet and i could't hide any answers.

    . There are MANY transmitters out there. I recommend searching back for past threads with recommendations.
    2. Yes, if they are in a suitable format.
    3. I already gave you a link in a previous question to a thread all about this. Please don't post duplicate questions.
    4. With iTunes you either need to burn the tracks to a CDRW, then convert to MP3/WMA, or use a program like JHymn to convert (Google JHymn).

  • Two quick questions about Library after moving beginning on a new computer

    Hi there,
    I just moved from Windows to Mac, meaning I had to move my iTunes library from the old PC to my new MBA.
    Just a couple of quick questions.
    1. When I started iTunes on my new Mac, in the preferences I directed the media folder to the folder with all my itunes music/podcasts etc, and then I imported the Library XML file.  Is this incorrect? Should I have imported a different file? Should I have used the itl file instead? 
    If so, should I delete the library and start again?  (if this is the case, please suggest the best way of doing this without affecting my media)
    - a kind of sub-question to this one:  some of the media files arent showing up in the iTunes library, but they are in the media folder on the ext HDD.  Is there a way I can find out which ones havent been recognized by iTunes?  Whats the best way of getting them in to my library?
    2. Pretty much half of my podcasts have not been loaded in the new iTunes.  The ones that havent were ones that I subscribed to on my iPhone, whereas the ones that show up in iTunes were ones I downloaded from iTunes.  When I connect my iPhone and sync it with iTunes, will those podcasts show up in iTunes?  Or is there a risk that they will be deleted from my iPhone?
    Cheers,

    The .xml is lacking some information such as ratings, date added, and play count.  Using the .itl includes this information but cannot be imported using the method you did.
    A complete library is everything in the iTunes folder.  By using the method you did you left the artwork behind in the artwork folder on the other machine.
    Selecting the media folder in preferences does not get iTunes to recognize the media.  All it does is tell iTunes to start storing new media in that location.
    Using the method I outlined nothing will be missed (with the exception of WMA) because you aren't rebuilding your library, you are using the one that already exists.
    You don't have to re-copy everything as long as you get the stuff you missed and re-assemble it all as it was before except not on the Mac.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391

  • Recording from DVD-Audio Pla

    How?
    X-Fi Soundcard
    GreetingsMessage Edited by zickzack on 09-24-2005 0:22 PM

    Can you be more specific? What are you trying to record?
    If you mean you want to record the audio you're playing from DVDs (audio DVDs) then I'm afraid you'll have to look elsewhere for that type of information, as that would involve breaking copyright laws (and encryptions depending on what you're playing).
    Cat

  • Quick question about Quicktime media keys.......

    I had a question about encoding video and media keys. It seems to me that the only codec that allows you to encode it with a media key is Sorenson (Sorenson 3 I think). Why are they the only ones that are enabling that in their codecs? Is it kind of a dying technology or practice? I've experimented with Sorenson 3 and Sorenson Squeeze trials and, even though it looks ok, it simply doesn't stack up to others like Apple's H.264 or open-source x264 or even Xvid. I guess I wish there were a way to be able to use media key options with all the new H.264 codecs. Is it possible to do that, either with Xcode or AppleScript? Any help would be greatly appreciated!!

    QuickTime has supported 'media keys" since version 3 but you can only add them using the third party software.
    You would be better served by contacting Sorenson and asking them about their support for newer codecs.

  • Quick Question about fade effect

    Quick Question:
    If I wanted to add a Fade Effect from one state to another
    when a button is pressed.
    How would I do that within the code?

    quote:
    Originally posted by:
    atta707
    You can do something like on the click of the button:
    var fader:Fade = new Fade(targetUIComponent);
    fader.duration = 1000;
    fader...;
    fader.play();
    or listen for currentStateChanging event and write the same
    similar code.
    or define transitions from one state to another like:
    <mx:Transition id="toOneOnly" fromState="*"
    toState="OneOnly">
    <mx:Sequence id="t1" targets="{[p2]}">
    <mx:Iris showTarget="false" duration="350"/>
    <mx:SetPropertyAction name="visible"/>
    <mx:SetPropertyAction target="{p2}"
    name="includeInLayout"/>
    </mx:Sequence>
    </mx:Transition>
    Hey,
    I would like to use the "transition from one state to
    another", but if you can explain each part for me that would be
    helpful.
    If you can comment on each line of that code that would help
    thanks

Maybe you are looking for