Quick Question About My iPOD Plz Help!

Hey i have the 30gig ipod vid and it was working fine and still is. The thing is i sync the files from my pc to the ipod and everything is okay, but then once i listen or watch the podcasts and stuff and it shows it has been played (blue dot beside new unplayed file is gone) and then after I try to sync again and the files that have been played will not show on the ipod again until i go and click marked as unplayed again and then update and it will show there again.
My question is does anyone know how to fix this where the sync will not remove already watched or listened files when it is updateing? (Is it a setting i have to fix?) I kno it didnt do this before hopefully someone can help me please and thank you!

got it to work no worries

Similar Messages

  • Question about lost iPod - Please help me out!!

    My iPod was stolen and is there anyway to relocate it if it connect to someone's computer? Could Apple track it down? And I am not sure whether I have registered my iPod online. Is there anyway to check??

    Apple have no process in place to either report or track stolen iPods. All you can do is report the theft to the Police together with it's serial number, and if your iPod was registered with Apple when you first got it, they will assist the Police in returning it to you should it ever be recovered.

  • A quick question about WebDynpro SLD and R/3 with concurrent users

    Hello ,
    I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3  for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
    - I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
    Thanks Ubergeeks,
    Guy

    Hi Guy
    You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because  a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
    For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
    Regards
    Pran

  • QUICK QUESTION ABOUT PORTS

    Hi, I have a quick question about port forwarding/mapping. My question, lets say I am running MSN messenger, who's ports are 6880-6900. But lets say I am running a torrent application or something else that requires those ports. If both applications were running at the same time, would this cause interference with them on the same ports or now. Thanks
    Nathan

    Normally, only one application can listen to a specific port number at a time. If MSN is grabbing those 21 ports then your torrent app won't be able to run.
    However, most apps don't work that way - even if they use multiple ports, they don't use them all at the same time, so MSN might use 6880 when it starts up, leaving the others open for other applications to use if needed.
    Only experimentation will answer that one.

  • Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

     

    Make sure that your bean is implementing the serializable interface and that
    you are accessing the bean from the session with the same name.
    Bryan
    "Sandeep Suri" <[email protected]> wrote in message
    news:[email protected]..
    Hi, I have quick question about use of USEBEAN tag in SP2. When I
    specify a scope of SESSION for the java bean, it does not keep the
    values that I set for variable in the bean persistent.Thanks,Sonny
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • Questions about the ipod camera connector...

    Hi,
    i got some questions about the ipod camera connector.
    1)Is the camera connector compatible with the Sony camera DSC-P93A ?
    In fact, this camera got PTP protocol.
    PTP (Picture Transfer Protocol) Oui
    Marque PIM (Print Image Matching) Oui
    PictBridge™ Oui
    So, do the camera need to have the three following protocols to be compatible with the camera connector ?
    =>Mass Storage, PTP, and Type 4
    Or maybe does it need only one of it??
    2) Is it compatible with a USB memory card reader?
    Thank you

    Wel, if i've right understood what you said, my camera is compatible because it got PTP protocol ?
    That's weird, cause i wrote a mail to sony to ask them about the compatibility of my camera, but they answered that it wasn't. But of course, i'll prefer to believe you than them !

  • IMovie - quick questions about video files when importing and optimizing

    Hi, have some quick questions. I think they are simple.
    1. When I import a video (from say iPhoto), where does it get "Move" or "Copy" to?
    2. Why would I want to do "Copy" instead of "Move", because isn't it then taking up more space?
    3. I'm wondering if after I optimize a video, I can stash away the original (non-optimized video that I either "Move"d or "Copy"d earlier) into an external hd.
    4. By the way, what is the new file name of the optimized video?
    Though things are working fine in iMovie and iPhoto, I'm trying to manage hard disk space, and hope answers to these questions will help.
    Do you guys have a guideline on how to manage hard disk space when it comes to iphoto and imovie?
    Thanks.

    As has been suggested you can encourage people to download QuickTime player by doing something like this...
    http://www.mirroroftheuniverse.com/Songs.html
    You can also present your songs like this...
    http://roddymckay.com/Satellite/JukeBox.html
    This is a SnoCap jukebox and you need an account to use it but you'll get the link to ESnips on the above page.
    A 3 minute song has a file size of about 30 Mb in AIFF format. Converting it to MP3 reduces it to about 3.5 Mb and M4A to about 5.5 Mb.
    iTunes will do these conversions for you and M4A is far superior to MP3 as far as sound quality is concerned.

  • HT5312 I can't seem to get the rescue email for my security questions to reset them plz help idk what to do :o

    Plz help me idk what to do

    If you aren't receiving the email (and you've checked the spam folder on your rescue email account as well as the inbox, and tried clicking the reset link again), or you don't have a rescue email address on your account (you won't be able to add one until you can answer your questions), then you will need to contact iTunes Support / Apple in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699

  • HT4623 Im so lost on this ipod plz help plz

    Someone plz help this lost gurl i jus bought this ipod touch an its used an the sad thing is everyone i kno is not smart enough to help me update it. when i go into general settings under the about op there is not a op for updates ive done what i kno but mayb someone could help me please

    The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848
    NOTE: A 2nd generation can not be upgraded beyond 4.2.1.

  • Quick question about Quicktime media keys.......

    I had a question about encoding video and media keys. It seems to me that the only codec that allows you to encode it with a media key is Sorenson (Sorenson 3 I think). Why are they the only ones that are enabling that in their codecs? Is it kind of a dying technology or practice? I've experimented with Sorenson 3 and Sorenson Squeeze trials and, even though it looks ok, it simply doesn't stack up to others like Apple's H.264 or open-source x264 or even Xvid. I guess I wish there were a way to be able to use media key options with all the new H.264 codecs. Is it possible to do that, either with Xcode or AppleScript? Any help would be greatly appreciated!!

    QuickTime has supported 'media keys" since version 3 but you can only add them using the third party software.
    You would be better served by contacting Sorenson and asking them about their support for newer codecs.

  • Quick Question about fade effect

    Quick Question:
    If I wanted to add a Fade Effect from one state to another
    when a button is pressed.
    How would I do that within the code?

    quote:
    Originally posted by:
    atta707
    You can do something like on the click of the button:
    var fader:Fade = new Fade(targetUIComponent);
    fader.duration = 1000;
    fader...;
    fader.play();
    or listen for currentStateChanging event and write the same
    similar code.
    or define transitions from one state to another like:
    <mx:Transition id="toOneOnly" fromState="*"
    toState="OneOnly">
    <mx:Sequence id="t1" targets="{[p2]}">
    <mx:Iris showTarget="false" duration="350"/>
    <mx:SetPropertyAction name="visible"/>
    <mx:SetPropertyAction target="{p2}"
    name="includeInLayout"/>
    </mx:Sequence>
    </mx:Transition>
    Hey,
    I would like to use the "transition from one state to
    another", but if you can explain each part for me that would be
    helpful.
    If you can comment on each line of that code that would help
    thanks

  • Question about the "iPod radio remote"

    I assume the "radio remote" is the same for every country and is under software control. I want to buy in Canada but use in UK and Canada.
    Has anyone got one and seen the RDS work, in the UK almost every FM channel is RDS. Do they have RDS in Canada (Toronto) can anyone confirm?
    And of course it says FM so this again I assume no AM, not that I need AM it was just an interest in if it could do it.
    What happens about headphones, you can plug a pair into the remote, can you still plug into the bottom of the iPod or does the remote connector get in the way.
    What is the story with "line out" I use this all the time as I amp my headphones. So I assume you cant use line out? or is the remote a line out also.
    And I assume the remote cable and you headphones act as the aerial, how is the quality? Is it any good indoors, some little FM radios I have used drop to mono indoors. Does this Apple one frop to mono if the signal is weak?
    Someone that has one can perhaps answer
    Cheers
    Ray

    I can at least answer some of the questions.
    The RDS function on this radio/remote is poor in the
    UK. You have to set the radio function on the iPod
    to "Europe" and when you do this RDS info is not
    displayed on almost all radio stations such as
    Virgin, XFM, Capital, GLR, etc. It does display on
    Radio 2 however. At least, this is my finding. So
    it's unpredictable at best. Setting the radio to
    "USA" on the iPod increases the likelihood of getting
    the RDS to display, but the downside is that you can
    then only tune the radio in increments of 2mhz which
    is a bit awkward if your looking for 89.1mhz!
    There are three settings for the radio which you
    choose via the iPod. They are USA/Europe/Japan. No
    setting for Canada, although I'm sure you will still
    be able to use it over there as I can still use mine
    here in the UK even if it's set to USA.
    No, there is no AM radio.
    You can plug headphones into the remote or the
    headphone jack on the iPod, or both at the same time.
    I'm not sure I understand your question about the
    bottom of the iPod. The radio plugs into the iPod
    via the dock connector.
    There is no 'line out' on the iPod. If you mean the
    one on the dock, then no you can't use it as you
    cannot place the iPod into the dock whilst the
    radio/remote is connected as they use the same
    connector.
    Yes the cable of the remote acts as the aerial.
    Reception is surprisingly good where I am, but it
    will of course depend on where you use it. I've
    used it indoors without any drop in signal or it
    dropping to mono.
    Lastly, you need to update the software for both the
    nano or the 5th generation for the radio to work
    (after you do this a radio function appears in the
    menu), and some users have found that doing this
    screws up the iPod. I have mine working on both the
    nano and the 5th gen without any problems.
    There is a review of the radio/remote here. I like
    mine and consider it a worthwhile accessory, but of
    course there will be those who disagree.
    iPod
    Radio/Remote Review.
    Thank you for the reply.
    Think your right USA or Europe will work in Canada.
    Yes I mean the line out via the dock, I just wondered if the remote become a line out socket (I also use a pocket dock for line out for headphone amp as I use a pair of Sennheiser HD600 with my ipod) but of course that is silly becasue you have a volume control on the remote and line out is normaly fixed.
    Based on your views I shall get one in March when in Toronto
    Cheers
    Ray

  • Quick Question about Cisco 3560 and the Web Device Manager

    Alright, I have a quick question that I am curious about but I haven't found any information
    about it.
    When I log into my Cisco 3560 using the web portal to get to the Device Manager. Below the
    diagram of the switch, then under the Dashboard there is section called Switch
    Health, Port Utilization.
    Under the Switch Health there is Bandwidth Used, Packet Error. Those two options just sit
    at zero and do not move. The Port tilization graph is also sitting at zero.
    Is there a way to make them functional?

    Anyone notice performance increase or decrease of their HD when using the nVidia IDE SW drivers?  particularly with a 74GB Raptor?  I've also heard of burner issues when installing the IDE SW but have not used my burner yet.

  • Quick question about showing drive space

    Hi,
    Just got a quick query about showing remaining drive space on the desktop.
    Before I wiped my Pismo and reinstalled Tiger (bad kernel panic), my hard drive and any other connected drives (pen drive, iPod, iDisk, etc) showed up on my Desktop with the name and drive capacity and remaining space underneath the icon.
    Now I've reinstalled, the drive capacity and remaining space don't show up on the Desktop, and I can't find how to turn it on. I've been through Preferences several times and can't find an obvious switch. Have I missed something? I'm running Tiger 10.4.8 with the machine spec below.
    Thanks in advance,
    Rob Johnson

    Sometimes, for no obvious reason, the Finder can be slow to update. And sometimes it updates instantly. Why? "Only the Shadow knows...." or maybe the Apple programmers.
    Francine
    Francine
    Schwieder

  • Quick question about sim transfer

    Hi all,
    I have a quick question and hopefully one of you guys would be able to help me. My friend purchased his 3g iphone today and hes giving me his old iphone. I currently have a blackjack and I wanted to take the sims card from the blackjack and put into the original iphone. Will the iphone work with my sims card? It is an older sims card, says 64k on it. If not, would I have to bring it into at&t and get it activated w/a different sims card? Hopefully all this isnt confusing. Thanks for any help. Cheers!

    You're welcome.
    I guess that also means I would have to upgrade to the 20 dollar data plan without the text messages as well?
    The unlimited data plan for the first generation iPhone still costs $20/mo and includes 200 SMS. The only thing you need to get from an at&t store is a new SIM card. Take the iPhone with you telling them what you plan on doing and they should give you a new SIM card at no cost.
    You will activate this iPhone with iTunes on your computer. If you are an existing subscriber, your calling plan will transfer to the iPhone, and any existing data plan you are using with your current phone will be cancelled. If you are an existing subscriber, your only selection will be the $20/mo unlimited data plan which includes 200 SMS, and you can select 1,500 SMS for an additional $10/mo or have unlimited SMS for an additional $20/mo.

Maybe you are looking for