Quick question about reinstalling Lion and iLife

Hi,
I have a MacBook Pro mid 2010.
If I reinstall Lion, I obviously need the "Applications Install DVD" to install iLife. This should work even if the DVD is for Snow Leopard that came with my Mac, right?
Just to make sure...
V-M

This is much simpler.
If you have the System Restore disks that came with your Mac then yes, you do have the iLife apps on them.
Yes you can install the iLife apps without installing the whole OS. Just opt to 'Install Bundled Applications only'
Regards
TD

Similar Messages

A quick question about WebDynpro SLD and R/3 with concurrent users

Hello ,
I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3 for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
- I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
Thanks Ubergeeks,
Guy

Hi Guy
You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
Regards
Pran

Quick Question about Cisco 3560 and the Web Device Manager

Alright, I have a quick question that I am curious about but I haven't found any information
about it.
When I log into my Cisco 3560 using the web portal to get to the Device Manager. Below the
diagram of the switch, then under the Dashboard there is section called Switch
Health, Port Utilization.
Under the Switch Health there is Bandwidth Used, Packet Error. Those two options just sit
at zero and do not move. The Port tilization graph is also sitting at zero.
Is there a way to make them functional?

Anyone notice performance increase or decrease of their HD when using the nVidia IDE SW drivers? particularly with a 74GB Raptor? I've also heard of burner issues when installing the IDE SW but have not used my burner yet.

Question about Snow Leopard and iLife

One of my iMac computers has Leopard and iLife 08, if I upgraded to Snow Leopard, will it also upgrade iLife to 09, or will I still have 08?

I erased my hard drive prior to installing SL and restored the bundled apps as you described, but when I launch iPhoto I get the following message:
"You can't open your current photo library using this version of iPhoto. You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto."
I did a software update and now have v7.1.4. I'm puzzled because I don't have any other versions of iPhoto that I could have made changes to my library with.

Question about reinstalling osx and apple id activation

if i reinstall os x fresh on my laptop without first de-authorizing my apple id, will it use another authorization when i go to authorize again? i'm confused if it goes by hardware id or what and i can't seem to find an answer anywhere.

There aren't any "authorizations" as you are referring. There is no limit to the number of times you can reinstall the OS.
If you erase the drive or replace the drive, Internet Recovery will reinstall the originally shipped OS.
If you purchased Mountain Lion separately and installed over another OS, you'll need the Apple ID you used to purchase Mountain Lion.

Two quick questions about the project and timing panes

1) Is there a hotkey for toggling between the project and timing panes?
I can't seem to find this anywhere. I know F5 and F6 open and close them, but I'd like to be able to simply activate then without having to click on them. I'd like to be able to simply toggle between them and navigate using the arrow keys
2) Is there a way to lock together the project and timing views so that when you open a group in one that group is also opened in the other?

Sure, play/stop SHOULD work, but it doesn't always. And the up/down arrows only work to move layers in some instances. Try this. In a normal project, select a layer in either the layers pane or the canvas. Use the up/down arrows and you'll find Motion cycles between layers. Now close the layers pane (F5) and open it again. Now try to use the up/down arrows. It no longer cycles on my machine (and probably yours).
In fact, Motion 4 broke a LOT of the keyboard shortcuts that used to work seemlessly in Motion 3.
For example: I create a text object and start typing my text. About 30 percent of the time hitting the spacebar while typing text will cause playback to start. Pure annoyance.
I used to be able to Hit HOME and END to go to the start and end of the project when the layer's pane is active, now I can't.
About 25 percent of the time when I'm in the layers pane and I hit spacebar, instead of playing the project, I turn off the layer that was currently selected.
Those are just a few of my pet peeves. There are definitely some real issues with shortcuts in Motion 4.
Andy

Quick question about mobile sites and publishing.

I currently have a desktop site at fabhollie.com
I would like to start designing a phone and tablet site. My question is can I publish only the desktop site rather than all three? I would like to be able to work on the mobile site without publishing them until I have completed them. Some of the content on my requires me to update it weekly. Is there any way I could make these changes on my desktop site and publish them without publishing the unfinished phone and table pages? Thanks.

You certainly can! ;-)
Go into your site Properties. Select Mobile on the left and uncheck the redirect button down on the lower right. This will still publish the mobile site to the live server so you can test it but it won't automatically redirect until you check that box again.
It is a feature designed for exactly what you want to do.

Question about reinstalling OS and getting applications back.

I want to restore my macbook pro using the disk that came with the computer to make it run faster. It seems to be bogged down recently. I also want to keep the applications that are on my computer, but several install disks were destroyed in a flood that hit last summer. How can I keep these applications, while cleaning out the rest of the system to make it run faster than it is now.
Thanks!!

Tyler Parker wrote:
I want to restore my macbook pro using the disk that came with the computer to make it run faster.
Unlike some other OSs, that's unlikely to help.
It seems to be bogged down recently. I also want to keep the applications that are on my computer, but several install disks were destroyed in a flood that hit last summer. How can I keep these applications, while cleaning out the rest of the system to make it run faster than it is now.
You may not be able to. Even if you use +Setup Assistant+ or +Migration Assistant,+ some apps cannot be transferred properly, especially some of Adobe's. See: [Transferring Applications|http://web.me.com/pondini/AppleTips/TransferApps.html].
A full restore from your Time Machine backups should be ok, but that will bring back everything, thus even less likely to help.
|
Your best bet, by far, is to address the problem directly. As Kiraly, a frequent poster here, says, if your kitchen faucet leaks, don't start by tearing out the entire kitchen -- start by replacing the washer.
First, is there at least 15% free space on your internal HD? If not, that may be the problem right there.
If there is, start with this: [Intel-based Macs: Using Apple Hardware Test|http://support.apple.com/kb/HT1509]. Run the Extended tests.
If that doesn't show problems, Verify your internal HD, per #6 in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html] (or use the link in *User Tips* at the top of the +Using Snow Leopard+ forum).
Then +*Repair Permissions+* on it, per #5 there.
If you really suspect your installation of OSX, I'd suggest downloading and installing the 10.6.6 "combo" update. That's the cleverly-named combination of all the updates to Snow Leopard since it was first released, so installing it should fix anything that's gone wrong since then, such as with one of the normal "point" updates. Info and download available at: http://support.apple.com/kb/DL1349 Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.
If that doesn't help, reinstall OSX from your Snow Leopard Install disc (that won't affect anything else), then apply the "combo" again.
If still no help, peruse this: http://www.thexlab.com/faqs/performance.html

Quick question about custom Components and Panels

Okay, so here is the situation.
I created a custom component that overrides paintComponent. All this component does is draw a diagonal line.
If I add this component directly to a JFrame it displays fine.
The issue: I made a custom JPanel that at the moment only contains this component. If I add it to the JPanel then add that to the JFrame, it only displays a dot.
Any suggestions?

Layout issue. The intermediate JPanel has a default FlowLayout manager which shows its child components at their preferredSizes. These sizes are computed by the layout manager in the process of laying out the children. When there are no children the size reported to the parent is the default size which for JPanel is (10, 10). You can change the layout manager for the intermediate panel or specify a preferredSize for the graphic component in one of two ways:
1 - use the setPreferreSize method
2 override the getPreferredSize method in the class:
class Pseudo extends Jpanel {
    protected void paintComponent(Graphics g) {
        // custom drawing...
    public Dimension getPreferredSize() {
        return new Dimension(desiredWidth, height);
}

Quick question about PHP sessions and Air app

Could someone clear this up for me?
My air app makes html requests to php scripts, php login, search etc. I've been advised to use sessions in the php scripts to ensure each request to a script is done by a logged in user.
So is the session identifier stored automatically by air somewhere, similar to a cookie in a browser?

4.4.1 is indeed the version of php in 10.4.6, but it's also the version of php that's running on my 10.3.9 server. You can execute php -v on your server to see which version you've got, but it seems unlikely that it's a version other than 4.4.1 if you haven't updated it yourself. Are there security updates you haven't applied?

Quick question about Mountain Lion

Do you only get dictation, or the ful siri functions?

Dictation is an announced feature. There's been no mention of Siri.

After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl. Restart gets back to normal, then 40 minutes later need to restart again. Thought about reinstalling Lion through Lion Recovery, but says my hard disk is locked?

After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl. Restart gets back to normal, then 40 minutes later need to restart again. Thought about reinstalling Lion through Lion Recovery, but won't let me, says my hard disk is locked? Any suggestions?

Launch the Terminal app in /Utilities/, run these two commands (copy & paste each one separately and hit the return key):
sudo chflags 0 /volumes/*
sudo chmod a+rx /volumes/*
at the Password: prompt, type in your admin password, carefully since nothing displays on the screen, and hit the return key. These should unlock your drives. You might have to restart.

Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

After reinstalling lion, missing ilife, how do I get the program back?

after reinstalling lion, missing ilife, how do I get the program back?

No, you don't. Your new purchase is connected to your Apple ID, so you will not have to pay to purchase the iLife apps that came with the computer.
See OS X Lion: About Lion Recovery .

QUICK QUESTION ABOUT PORTS

Hi, I have a quick question about port forwarding/mapping. My question, lets say I am running MSN messenger, who's ports are 6880-6900. But lets say I am running a torrent application or something else that requires those ports. If both applications were running at the same time, would this cause interference with them on the same ports or now. Thanks
Nathan

Normally, only one application can listen to a specific port number at a time. If MSN is grabbing those 21 ports then your torrent app won't be able to run.
However, most apps don't work that way - even if they use multiple ports, they don't use them all at the same time, so MSN might use 6880 when it starts up, leaving the others open for other applications to use if needed.
Only experimentation will answer that one.

Quick question about reinstalling Lion and iLife

Similar Messages

Maybe you are looking for