QUICK QUESTION/CONCERN

okay..problem...now whenever I connect my ipod to my usb port..MY COMPUTER COMPLETELY FREEZES!! and it's been doing this recently, but never did, and I've had my ipod for about a month now...WHAT IS WRONG?!! WHAT DO I DO?!
Windows XP

Hi Ram Prakash Sharma,
If your cluster can pass all the validation settings please first check whether you have configure the preferred node correctly, you can refer the following article to realize
how to setting the preferred owner.
Preferred Owners in a Cluster
http://blogs.msdn.com/b/clustering/archive/2008/10/14/9000092.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Quick question concerned with external HD space

just a quick question
if TM only backs up files that have changed since the last backup
why does every time it back up i end up with a folder in my external HD (that acts as a time machine) that is the same size of the hard drive?
(e.g im using up 70 gigs on my macbooks HD..every time i back up with TM i end up with 70 gigs less on the external..should i just lose the space of the changed folders? :S)

That's the "magic" (or "smoke and mirrors") of Time Machine.
It makes "hard links" (sort of like multiple aliases) to the backups of the items that didn't change. That makes each backup, in effect, a full one.
That's how when you go into the "Star Wars" display, it can show you a snapshot of your entire system at the time of any backup.
If you look at your backups via the Finder, each dated backup folder is counting all those items that didn't change; so each one appears to be a full copy of your Mac. The sum of all the backup folders will be far greater than the amount used on the whole backup disk.
By the way, be +*extremely careful+* using the Finder on your backups -- if you change, move, or delete anything there, you can hopelessly corrupt them.
You can do everything you need to via TM.

A quick question concerning replacing the DVD drive in a HP pavillion dv6-2057cl

I need to replace the DVD drive in this dv6 and I am wondering if there is any wiggle room when it comes to the replacement drive. Can I use another HP disc drive with a similar model # or am I restricted to the "identical" drive?
Some quick info follows:
OS = Windows 7 home premieum (32bit)
The drive pulled out of the laptop:
Super Multi DVD Rewriter
MODEL: GT20L
FW : DC05
HW : A2
TYPE : AMCK702
CT : 7AXVK012GY3NRY
HP mPC PN : 461646-6C2
S/N :
{Removed for privacy}
MANUFACTURED : OCTOBER 2008
I have found a replacement with the same "Model #" and same "HP mPC PN" however it was manufactured in 2009 and I do not know if the placement of the SATA connection on the rear of the drive matches up or not.
Any help is much appreciated!!!!!!
Thank you,
DaFlash
This question was solved.
View Solution.

It looks like the part number is the same. As long as the part number is the same, it is essentially the same part and should work without any issues. The only time that part may not work is if the part number is different. If any part is different from another part (firmware, hardware, etc.), it will have a different part number. As long as 461646-6C2 is the same on both, there shouldn't be any issue with replacing the drive.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Quick question concerning "load movie"

Hi,
I'm sure this is a dead simple question, but I'm not sure
about syntax. Basically I have several buttons which when pressed
load a new swf into a movie clip _root. I want each different
button to take the viewer to to a different frame in the loaded
movie. So button 2, would open the new swf at frame 1, button 2,
would open the new swf at frame 2, etc.
This is the script I'm using to load the new swf:
on (release) {
_root.bigphoto.loadMovie("big photos.swf");
What should I add to it?
Many thanks.

"DaveCunningham" <[email protected]> wrote
in message news:e5mo6o$5jl$[email protected]..
> Hi,
>
> I'm sure this is a dead simple question, but I'm not
sure about syntax.
> Basically I have several buttons which when pressed load
a new swf into a movie
> clip _root. I want each different button to take the
viewer to to a different
> frame in the loaded movie. So button 2, would open the
new swf at frame 1,
> button 2, would open the new swf at frame 2, etc.
>
>
> This is the script I'm using to load the new swf:
>
> on (release) {
> _root.bigphoto.loadMovie("big photos.swf");
> }
>
> What should I add to it?
>
> Many thanks.
//****************** main.swf *******************
// button to send two.swf to frame 10
on (release) {
loadMovieNum("two.swf?vars=10",1);
// button to send two.swf to frame 30
on (release) {
loadMovieNum("two.swf?vars=30",1);
//****************** two.swf *******************
// a preloader is required to make sure this movie is fully
loaded before checking the vars value
this.onEnterFrame = function()
var gbt = this.getBytesTotal();
var gbl = this.getBytesLoaded();
if( gbt > 20 && (gbl == gbt))
delete this.onEnterFrame;
gotoAndStop(vars);// jump to the frame number in vars
You can also pass frame labels instead of numbers if you want
to.
tralfaz

IMovie - quick questions about video files when importing and optimizing

Hi, have some quick questions. I think they are simple.
1. When I import a video (from say iPhoto), where does it get "Move" or "Copy" to?
2. Why would I want to do "Copy" instead of "Move", because isn't it then taking up more space?
3. I'm wondering if after I optimize a video, I can stash away the original (non-optimized video that I either "Move"d or "Copy"d earlier) into an external hd.
4. By the way, what is the new file name of the optimized video?
Though things are working fine in iMovie and iPhoto, I'm trying to manage hard disk space, and hope answers to these questions will help.
Do you guys have a guideline on how to manage hard disk space when it comes to iphoto and imovie?
Thanks.

As has been suggested you can encourage people to download QuickTime player by doing something like this...
http://www.mirroroftheuniverse.com/Songs.html
You can also present your songs like this...
http://roddymckay.com/Satellite/JukeBox.html
This is a SnoCap jukebox and you need an account to use it but you'll get the link to ESnips on the above page.
A 3 minute song has a file size of about 30 Mb in AIFF format. Converting it to MP3 reduces it to about 3.5 Mb and M4A to about 5.5 Mb.
iTunes will do these conversions for you and M4A is far superior to MP3 as far as sound quality is concerned.

CDC Subscription question concerning transactional consistency

Hi
Hopefully a quick question: can anyone confirm whether or not it is the subscription that controls transactional consistency when accessing change records in the change views?
For example, if you have 20 source tables that you are capturing changes for and create one change source, one change set containing 20 change tables and one subscription for which you have 20 change views then because it is the subscription that you specify when performing the extend and purge operationa and hence it is the one subscription than ensures that when an extend is issued then all change records across the 20 change views will be transactionally consistent.
I have had an alternative design proposed to me that is to use 20 separate subscriptions - one for each source table and change table. My concern is that this will not ensure transactional consistency across the 20 tables and that any ETL design (for example 20 separate threads running in parallel and each doing an extend, process, purge sequence) cannot ensure that the change records in the change views correspond to the same transaction across the tables in the source database.
I hope that this is clear - any views and opinions on this will be very gratefully received.
Many thanks
Pete

>
Apologies if this appears to be belabouring the point - but it is an important bit of understanding for me.
>
The issue is not that you are belabouring the point but that you are not reading the doc quote I cited or the last paragraph on my last reply.
Creating a consistent set of data and USING (querying) a consistent subset of that data are two different things. The publisher is responsible for creating a change set that includes the data you will want and the change set will make sure that a consistent set of data is available.
Whether a subscriber makes proper use of that change set data or not is another thing altogether.
If you create 20 subscriptions then those are totally independent of one another just lilke 20 people subscribing to the Wall Street Journal; those subscribers and subscriptions have NOTHING to do with one another. If you want to try to synchronize the 20 yourself have at it but as far as Oracle is concerned each subscriber is unique and independent.
If you want to subscribe to, and use, a consistent subset of the change set then, as the doc quote said, you have to JOIN the tables together.
Read the documentation - you can't understand it if you don't read the doc and go through the examples in it.
Step 4 Subscribe to a source table and the columns in the source table shows you exactly how you have to do the join.
The second step of that example says this
>
Therefore, if the subscriber wants to subscribe to columns in both publications, using EMPLOYEE_ID to join across the subscriber views, then the subscriber must use two calls, each specifying a different publication ID:
>
'. . . join across the subscriber views . . .'
Don't be afraid of breaking Oracle by trying things!
The SCOTT EMP and DEPT tables might currently have a consistent set of data in the two tables. But if I query EMP from one session (subscription) and query DEPT form another session (subscription) the results I get might not be consistent between them because I used to independent operations to get the data and the data might have changed in between the two steps.
However if I query DEPT and EMP using a JOIN then Oracle guarantees that the data from both tables will reflect the same instant in time.
Not a perfect analogy but close to the subscription use. If you want to subscribe to data from mutiple tables/views in the change set AND get a consistent set of data you need to join the tables/views together. The mechanism for doing this is not the same as SQL but is shown in the above example in the doc.

Quick question from future mac user

Hi there.
Just a quick question about the Intel iMacs.
Total noob with Macs so please forgive me, I'm looking to get away from Windows and PC's but not sure what I would need exactly.
Would the 24":3.06GHz Intel Core 2 Duo iMac with 4GBs of RAM and 1TB hdd be more than enough to handle video/audio editing with Final Cut Pro Studio, some gaming (such as newer MMO games or RPG/FPS games) and maybe running VMware Fusion for running Windows apps and games that I have/use that are either not available or not yet supported by Apple?
Or would I be looking at goin with the Mac Pro?
I'd rather shoot for the iMac because I'm SO tired of PC's and boxes and would like my computer to actually look nice as well as kick butt. But I'm just worried that if I got with the iMac I won't be able to perform those functions well or at all.
I love the look and feel of the iMac although I don't think you can get more than 4GBs of RAM or more than ONE hard drive inside (which isn't a big concern as I can always use external drives) so I'm just wondering if upgrading to the extra ram and hdd space from the get go would be a great help without having to worry about adding more later.
I'd like to be able to just use the iMac than the Mac Pro because the price difference seems to jump up quite a bit between iMac and Mac Pro. I'm just worried if that type of iMac setup wouldn't be enough for what I need.
Any suggestions or information would be greatly appreciated. Thanks.
Janin

The iMac in general is more than enough to perform those tasks well however the Mac Pro still has it's advantages. Lenn already went over those so take a look at these speed scores as they may help you to make your decision.
http://www.marketingtactics.com/Speedmark/
Either way I recommend getting the base RAM configuration from Apple and purchase RAM from OWC.
http://eshop.macsales.com/item/Other%20World%20Computing/6400DDR2S4MP/
http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=284&type=Memory&TI=0 655&shoupgrds=Show+Upgrades
George

Report Generation Toolkit Error Quick Question

Hi,
I created the most awesome LabVIEW report ever at my desk using a trial version of the RGT and Office 2003. I took this to my production machine and ")@#(&%(*#^%()^!!!" The production machine has office 2007 and a fully licensed version of the RGT. Both machines have LabVIEW 8.6.0. I've read all the stuff about these errors and something about classes and dll's and whatnot's. So my quick question, is: Instead of matching the versions of Microsoft Office as recommended, can I just rewrite from scratch the VI that creates this world's most awesome LabVIEW report on the production machine to create the same effect?
Solved!
Go to Solution.

Hi
Quick Answer: Probably
Slower answer: Microsoft changed a lot of things behind the scenes in Office 2007, but the Report Generation toolkit version 1.1.3 supports Office 2007 so you should be good to go. Depends on what functions are included in your VI. Liek the read me says "Several default settings in Microsoft Office 2007 differ slightly from previous versions. Reports you generate using Office 2007 might look different than reports you generate from other versions of Office because font sizes, cell sizes, and so on, differ."
Best Regards
David
NISW

Two quick questions about Library after moving beginning on a new computer

Hi there,
I just moved from Windows to Mac, meaning I had to move my iTunes library from the old PC to my new MBA.
Just a couple of quick questions.
1. When I started iTunes on my new Mac, in the preferences I directed the media folder to the folder with all my itunes music/podcasts etc, and then I imported the Library XML file. Is this incorrect? Should I have imported a different file? Should I have used the itl file instead?
If so, should I delete the library and start again? (if this is the case, please suggest the best way of doing this without affecting my media)
- a kind of sub-question to this one: some of the media files arent showing up in the iTunes library, but they are in the media folder on the ext HDD. Is there a way I can find out which ones havent been recognized by iTunes? Whats the best way of getting them in to my library?
2. Pretty much half of my podcasts have not been loaded in the new iTunes. The ones that havent were ones that I subscribed to on my iPhone, whereas the ones that show up in iTunes were ones I downloaded from iTunes. When I connect my iPhone and sync it with iTunes, will those podcasts show up in iTunes? Or is there a risk that they will be deleted from my iPhone?
Cheers,

The .xml is lacking some information such as ratings, date added, and play count. Using the .itl includes this information but cannot be imported using the method you did.
A complete library is everything in the iTunes folder. By using the method you did you left the artwork behind in the artwork folder on the other machine.
Selecting the media folder in preferences does not get iTunes to recognize the media. All it does is tell iTunes to start storing new media in that location.
Using the method I outlined nothing will be missed (with the exception of WMA) because you aren't rebuilding your library, you are using the one that already exists.
You don't have to re-copy everything as long as you get the stuff you missed and re-assemble it all as it was before except not on the Mac.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391

I have a MacBook Pro running 10.6.8 model 7.1; need to upgrade to Mavericks. My question concerns 3 software apps: Reunion 10, Quicken 2007, Appleworks 6.2.9. Any recommendations?

I have a MacBook Pro model 7.1 running 10.6.8; need to upgrade to Mavericks...question concerns 3 software apps: Reunion 10, Quicken 2007, Appleworks 6.2.9 (word processing docs). Any recommendations?

Quicken Essentials is universally loathed on this forum. Quicken 2007 updated for Lion, Mt. Lion and Mavericks for $15 is the way to go:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
Appleworks 6:
Partition your hard drive or add an external drive and install Snow Leopard and use the "dual-boot" method to run Appleworks; and/or
Install Snow Leopard Server (available by telephone order only from the Apple Store 1.800.MYAPPLE [1.800.692.7753]; part number - MC588Z/A) into Parallels and run Appleworks (and most other PowerPC apps) concurrently with Mavericks:
[click on image to enlarge]
Review Roger Wilmut's excellent series of articles, Abandoning Appleworks:
http://www.wilmut.webspace.virginmedia.com/notes/aw/page1.html

Quick question re select-options

Hi
I am relatively new to ABAP but have a quick question:
I need to create a select-options which does the following:
1. Allows ONLY "equals" signs
2. Disallows intervals
3. Disallows the use of ranges in the multiple selection box.
4. Allows multiple individual selections.
I can achieve most using the following:
select-options s_knvh for knvh-kunnr no intervals.
However, this still allows ranges using the multiple selection box, and also allows the "not equal to" option.
Adding the "no-extension" syntax simply removes my ability to use multiple individual entries.
Any ideas?
Thanks
Jon

Use this FM.
SELECT_OPTIONS_RESTRICT

Good afternoon ladies and gentlemen! My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In t

Good afternoon ladies and gentlemen!
My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.

<moved from Adobe Creative Cloud to Bridge General Discussion>

A quick question about WebDynpro SLD and R/3 with concurrent users

Hello ,
I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3 for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
- I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
Thanks Ubergeeks,
Guy

Hi Guy
You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
Regards
Pran

Master iPad configurator question concerning cart syncing with different versions of iPads.

I have a question concerning configurator syncing.Can the master iPad be a different version of iPad than the other synced iPads? For instance can iPad 2 be the master iPad to a group of iPad Air's? The iPad 2 has some fewer capabilities than the Air, would some settings or restrictions be left off of the iPad Airs if they were set up this way? Thanks.

There is no such thing as 'master iPad'. If you're using Configurator or Profile Manager control of the setup is done from a Macintosh.

QUICK QUESTION ABOUT PORTS

Hi, I have a quick question about port forwarding/mapping. My question, lets say I am running MSN messenger, who's ports are 6880-6900. But lets say I am running a torrent application or something else that requires those ports. If both applications were running at the same time, would this cause interference with them on the same ports or now. Thanks
Nathan

Normally, only one application can listen to a specific port number at a time. If MSN is grabbing those 21 ports then your torrent app won't be able to run.
However, most apps don't work that way - even if they use multiple ports, they don't use them all at the same time, so MSN might use 6880 when it starts up, leaving the others open for other applications to use if needed.
Only experimentation will answer that one.

QUICK QUESTION/CONCERN

Similar Messages

Maybe you are looking for