Quick Question: Online or In-Store?

I have found my dream laptop, the Samsung R580; but I have one question: I don't know whether I can purchase the laptop only online, or can I find this product in stores. I live pretty far from the nearest Best Buy, and I am afraid that this sale will end soon, so I am wondering if this product is available in-store, or only online. (I have no way to purchase it online, so I'm really hoping for the former to the the answer, haha.)
If anyone can help shine some light on this, or if someone can show me how I can determine whether or not this product is online-only, I'd appreciate your help greatly!
Thank you for reading!
Solved!
Go to Solution.

If you go to the product page, you can type in your zip code to see if any stores by you have it in stock.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Similar Messages

Some quick questions before I purchase LE8..

Hi all,
I'm a longtime mac user and I just got into music production. I plan on mainly making Hip Hop beats and also record me playing bass on sampled tracks. I have already purchased an audio interface( PreSonus Firebox 6x10) and some monitors (KRK RP5's). I'm going to be purchasing LE8 and a MIDI keyboard soon, as well as a turntable for sampling vinyl sometime this week.
I got some quick questions though. If I'm loading samples off vinyl into the ESX24 sampler in LE8, what program can I use within LE8 to cut the desired parts of the sample? Then assign them to my MIDI keyboard or Akai MPD24.
I plan on hooking everything up to my 2.16ghz w/2MB Macbook and was wondering if it could withstand Logic. Also, will I need to update any drivers for the firebox? I remember reading problems about it working with Logic.
Any help would greatly be appreciated. If any Hip Hop heads here have any tips/ suggestions, lemme know!
Thanks,
JC
Message was edited by: sonofabass

I'm not a big expert on audio recording, but other than the video card (which would not be a big factor for audio) you can't really upgrade it to much further than what you specified. You could increase the internal storage, but I've always been inclined to keep most of my personal files (things I am not actively working on now) on an external drive, and keep the OS, applications, and my current ongoing work on the internal drive, along with plenty of free space. I think that improves performance. If you did get the larger internal storage option, you might consider partitioning it into two volumes. You could keep your OS, apps, ongoing work, and that free space on one volume, and use the other volume for the long-term storage of your user files. Or maybe for your audio work, it is better to have a separate volume that is a dedicated +scratch space+, so if you had the larger internal drive, you can use that space more flexibly.
One other consideration is the CPU speed. There is really very little difference between 2.93 GHz and 3.06 GHz. It's about 4%, but in the real world, the performance difference is probably even less. So you could trade the $150 for the slightly faster speed and get the extra internal storage for $100, saving you $50.
Also, the online store has a page for clearance and refurbs (Special Deals). For example, this one is currently listed
http://store.apple.com/us/product/FB419LL/A?mco=MjE0NDk5Mw
It is the current gen iMac model. Note: Many of the items on the Special Deals section are previous generation Mac models (so keep that in mind if you look at other listings). My current iMac is a refurb. In my experience, the one Mac and two iPods I have purchased as refurbs have looked new. They just come in a plain brown box instead of the fancy retail packaging. The warranty is the same as new.

Quick question about sim transfer

Hi all,
I have a quick question and hopefully one of you guys would be able to help me. My friend purchased his 3g iphone today and hes giving me his old iphone. I currently have a blackjack and I wanted to take the sims card from the blackjack and put into the original iphone. Will the iphone work with my sims card? It is an older sims card, says 64k on it. If not, would I have to bring it into at&t and get it activated w/a different sims card? Hopefully all this isnt confusing. Thanks for any help. Cheers!

You're welcome.
I guess that also means I would have to upgrade to the 20 dollar data plan without the text messages as well?
The unlimited data plan for the first generation iPhone still costs $20/mo and includes 200 SMS. The only thing you need to get from an at&t store is a new SIM card. Take the iPhone with you telling them what you plan on doing and they should give you a new SIM card at no cost.
You will activate this iPhone with iTunes on your computer. If you are an existing subscriber, your calling plan will transfer to the iPhone, and any existing data plan you are using with your current phone will be cancelled. If you are an existing subscriber, your only selection will be the $20/mo unlimited data plan which includes 200 SMS, and you can select 1,500 SMS for an additional $10/mo or have unlimited SMS for an additional $20/mo.

Quick question re: Media Management

Hey..
quick question from a newbie.
quick timeline.
I just finished producing a 40 minute corporate video, and its done (my first video) everything is still on my 2nd drive (projects, footage, graphics and everything...
I've already made my client 500 DVD's after using compressor.
Now this project is currently still taking up more then half of my hardrive. I want to get rid of everything but still cover my behind in case down the road, they need more. or they want to add to it and such.
so my question is...
in addition to backing up to tape and keeping the compressed files on my computer..
If I export using Quicktime movie at the same settings of my final sequence. can I delete everything else? AS long as I keep the QT movie on my computer, is that just as good as the original project? am I able to edit from that in the future if I need to or if i need to throw it into compressor to make streaming video for the web? Is there any generation loss with that?
I know thats more then 1 question.. any help would be awesome... you guys rock! and thanks in advance

.
If I export using Quicktime movie at the same
settings of my final sequence. can I delete
everything else? AS long as I keep the QT movie on my
computer, is that just as good as the original
project? am I able to edit from that in the future if
I need to or if i need to throw it into compressor to
make streaming video for the web?
If you export a quicktime movie you create a "whole" video. In other words, your transitions, clips and audio will essentiall become one long clip. You will not longer be able to eliminate music from voice for example. It will become one long track. You won't be able to take out transitions such as dissolves or wipes without taking a hunk of video on either side.
Best to delete your media and save your project and tapes. You can re-digitize later. Or buy a cheap hard drive and store it there.

Installing OBIEE on Windows 7, quick questions

Dear Experts,
Last year, I struggled installing OBIEE on Linux 5.5.
Now I want to install it on Windows 7 Ultimate.
It will be stand alone, for my own use only.
Both a client, and a server.
Some quick questions:
1)
Does the Windows server need to have a Domain (as Linux did)?
(I'm having some trouble with the same dummy domain that worked fine
in Linux, since it doesn't exist on the web.)
2)
Does the Windows server/client require a loopback adapter?
If so, does it require a static IP?
3)
Does the windows server/client require a static IP address?
4)
If static IP addresses are required for both 2 and 3,
is the static IP address supposed to match, or be different?
I hope these questions aren't too dumb. But I haven't found
anything online addressing them for windows yet.
Thanks a lot!

Hi,
1)
Does the Windows server need to have a Domain (as Linux did)?
(I'm having some trouble with the same dummy domain that worked fine
in Linux, since it doesn't exist on the web.)
A. Not required.
2)
Does the Windows server/client require a loopback adapter?
If so, does it require a static IP?
A. Yes it is require for Loopback adapter and static ip for installation -- Client installation is not required -- You can go for Simple installation in your laptop.
3)
Does the windows server/client require a static IP address?
A. Yes
4)
If static IP addresses are required for both 2 and 3,
is the static IP address supposed to match, or be different?
A.
Please refer my blog.
http://satyaobieesolutions.blogspot.in/2012/06/obiee-11.html
Please verify the below steps.
1. Please check whether are download 64 bit software or not.
2. First you have to install jrockit-jdk1.6.0_31-r28.2.3-4.1.0
3. before installing software you have to give full permissions to everyone on your installation location drive (C drive or D drive).
4.Create Looppack Adapter.
5. Database installation 11g 64 bit.
6. RCU 32 bit
7. OBIEE 11.1.1.6 64 bit
Hope this help's
Thanks,
Satya

Quick Question: Setting Render File Location

Hi all,
Quick question. I'm guessing with all the disappointment, the answer will be no, but I fully realize that I could have overlooked something so its worth asking!
In FCP7 (familiar phrase huh?) you could explicitly set a location for render files. I understand that you can save FCPX Events on different drives, as well as your projects, however it appears as if the Render Files are getting saved with a folder which also contains your .fcp project file.
I ask because I like having my project file on my internal so my Time Machine will pick it up when I have it hooked up, but all of those render files take up loads of space and I'd like that on my external media drive instead.
Is there:
a.) A way to tell FCPX to store Render Files in a different location
OR
b.) A way to move the Render Files to a different location without screwing up FCPX's ability to recognize the project and load it properly.
If so, great! If not, I'll send it along as a suggestion among with some others. Other than those overlooked technical aspects, I'm kind of digging the UI of FCPX and background rendering is saving me so much time its not even funny.

Hi Jorgen
I spent a bit of time on this today without any success.
In our studio, it's only me that edits... but I use a laptop and a macpro when things get serious. I have a RAID array tyed to the Macpro, and I access it with my laptop via gigabit ethernet.
I created aliases, and when I opened FCPX, nothing appeared. I also was not able to change the name of events I created, and while it would write the project name and events to the new aliased directories... when I reopened FCPX the events and projects were missing.
I then tried symbolic links via the terminal. No luck. I then checked ownership permissions, and made sure the permissions were ignored for the drive and everything was world readable and writable. No luck.
Have you had a chance to experiment with this yet?
Thanks

Screen not flush with bezzle,quick question...

Hey guys I have a quick question,ok so I just visited a apple store and recieved a new/referb. iPhone 3gs because of dust under the screen and noticed that the replacement phones bezzle and screen isn't flush and was wondering if i could bring the new phone in for a replacement phone with a flush screen? It's not realy a big issue but the first iPhone 3gs I had didn't have this problem.
Also has anyone had any experiences with this issue?
Thanks for your time and your help,
Noah
Message was edited by: Mr.Noah Renfrow
Message was edited by: Mr.Noah Renfrow

the 3GS is known for that. you should be able to return it.

Destiny Online Pre-Order Store Pickup

So I ordered the Destiny PS4 Limited Edition online and set it for store pickup at the Chico, CA location. I am just wondering if it will be able to be picked up for midnight release or not and even if that store is doing a midnight release for Destiny.

Hi waaskea,
Good question! Both in-store and online pre-orders can be picked up during the midnight opening events at participating locations. Our Chico, CA location is also slated to be hosting one, but full details can be found here. You should receive a pickup confirmation notice shortly before the event, so make sure to keep an eye on both your inbox and junk mail folders for additional communication.
Thanks for reserving your Destiny PlayStation 4 bundle with us!
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Fixed and 2 quick questions (bios thread)

Hi Everyone, i need your help again...
[....]. since i installed Win2k3 on my system i was getting stability problems, especially lockups to black screen in games. On Win2k3 i was using the exact same drivers as I am going to list soon, and so I thought I'd install Windows XP again on a spare hard drive to see if this helped. I wish i'd never messed with my system my previous XP install was almost 100% stable, but that's another story.
Today I perfomed these steps in this order:
1)Downloaded SP1a
2)formatted new hard drive
3)Booted from CD, did a Windows XP Pro install
4)Started XP Pro, installed SP1a
5)Installed Nforce system drivers and Display Drivers 29.42 (these were very good to me before...) and restarted
6)Installed Speedtouch USB ADSL Drivers 2.0.1.2 and went online
6.5)Enabled Hardware Acceleration on Displayt Properties
6.7) Installed direct x 9.0a web setup.
7)Did full windows update: all the critical stuff, most of the recommended (except MEssanger, Media Player and a couple others) and the CPU driver (left my Gfx and Sound on the above)
8) After a restart started a game
It lasted all of 10 seconds once I started playing.
Ok, maybe 5 seconds. Smae as Win2k3!!! I was running bios default performance options, with APIC off... so I ran Prime 95 for a while, got no errors .... about to try a memtest86 but I'm pretty cetrain the memory is good never had trouble with it before at all and I've tested it before too.
Can someone help me out? Here's my hardware config
[size=11]
AMD XP 1900+ (no overclock any more)
MSI K7N420D MB
2*512MB DDR266 Samsung 'Transcend' Memory (unbranded really) (16 chip DIMMs)
Geforce 2 MX400 32MB SDRAM (unbranded - runs a little faster then onboard graphics)
Adaptec 29160LP Scsi Card
IBM 16000rpm 32GB SCSI Disk (UW-2)
2*WD1000BB 100GB Western Digital IDE Drives (the normal ones with 2mb cache) in Software Raid - 0 on Promise card
18GB Maxtor ATA66 IDE hd on Nforce, with CDR.
a Promise Ultra TX100 Dual IDE Controller card (for CD Rom + expansion)
Enermax 431w PSU / 7200rpm fan on heavy HS.
Windows XP SP1 / DX 9.0a (going to reformat to Win2003)
[/SIZE]
I could really do with anyone's working driver config for a windows XP sp1a system, and how to build it from the bottom up. If a given driver config that works 100% for others fails for me I can start hardware troubleshooting and cursing loudly, otherwise with any luck it'll fix my problem.... please help me out i know there are people out there still running NForce 1 boards!
Quick question that could help: what sound driver revision from windows update should i be using? I can get the archived ones....
Thanks,
Naveen.
PS If i manage to fix it i'll update here, but i need a hand plz

.... also, I have the same errors running the same game from Win2k3 on a SCSI drive through the PCI bus (adaptec 29160) on the 2.7 bios. It looks like there is still an issue with fast PCI bus read/writes, sound usage and AGP card usage causing crashes. Discounting the OS change and APIC, I have these scenarios:
1) Game running off IDE drive on Nforce IDE ports: fine
2) Running of IDE drives on promise controller card: fails, locks.
3) Running off scsi drive on Adaptec 29160 card: fails, game locks.
So we may still have an issue with PCI read/writes and stability on bios 2.7 and Nforce system drivers 2.03 ... which is big news really.
I hope one of the moderators can put MSI in the picture and get them or NVidia to look into this. I can try eliminating APIC and the OS/Drivers from the issue, and install the game on all 3 drive configurations to confirm the above if necessary, but it's what it looks like from here. Using Performance bios defaults with no overclock, underclocking didnt help.
Perhaps bios 2.4 will fix this in which case the bios still needs work, 2 years on.
Naveen

Some quick questions before purchase of MBP

Hey Guys/Gals,
I've been a PC user all my life, but will now be making a permanent switch to Macs. I've been wanting to buy a MBP since they have been released, but have been hesitant (like many others I think...) about the issues of whine, extreme heat, warped screens etc...
With the recent updates of the logic board and even battery, I think I'm ready to go for it. I just had some quick questions before I place my order:
1. I could order my MBP from the computer store at my university. Do you guys think that will get me the newest possible MBP or will they maybe get me one that they have had in stock for ages? I really don't want to get stuck with an outdated logic board and/or battery. Is it safest just to order directly from the site?
2. Although the issue with really hot MBPs seems to have gotten better, I am still quite shocked that people say that temperatures well above 70 Celsius are "within spec". I understand that Apple officially states this and that the Intel chip can handle up to 100 Celsius, but this seems crazy to me Basically, I want to ask if I am correct in my observations that the new Intel chips don't get much hotter than other chips around, but rather Apple has chosen to set the temperature mark that sets off the fans pretty hight (around the 70s if I remember correctly?)
I would assume that in following their "mission" of creating beautifully designed computers, Apple also wants to have a really silent one. Now I'm all for a quiet machine, but I feel as though if fans were on either (a) all the time or (b) when the CPU reaches the high 50s lots of people would be happier.
Anyway, it's just a thought. I noticed there are lots of experts around here, so I'm just interested to hear what you guys think about this approach that Apple seems to have taken. I don't think the heat will stop me from getting this amazing notebook, but it certainly is a little frustrating.
Any responses are greatly appreciated.

1. I could order my MBP from the computer store at my university. Do you guys think that will get me the newest possible MBP or will they maybe get me one that they have had in stock for ages? I really don't want to get stuck with an outdated logic board and/or battery. Is it safest just to order directly from the site?
No matter where you take possession there's no assurance of when the machine was manufactured. There is really just as good a chance of getting a perfectly good computer regardless of place of purchase. If there is a problem it's covered under warranty. You can have the computer replaced within the first two weeks. Afterwards they will replace or repair. Without Applecare's extended warranty the computer is warranted for one year after purchase.
2. Although the issue with really hot MBPs seems to have gotten better, I am still quite shocked that people say that temperatures well above 70 Celsius are "within spec". I understand that Apple officially states this and that the Intel chip can handle up to 100 Celsius, but this seems crazy to me Basically, I want to ask if I am correct in my observations that the new Intel chips don't get much hotter than other chips around, but rather Apple has chosen to set the temperature mark that sets off the fans pretty hight (around the 70s if I remember correctly?)
You are wrong in your assumption. The Core Duo's maximum temperature is 125C before shutdown. Normal operating temperatures according to Intel's own documentation is 50-70C under average load. MBPs under heavy load will typically reach core temperatures over 80C. Then there's the added heat from the hard drive and GPU. The aluminum case acts as a partial heat radiator hence the case temperatures can get high. The MBP User Guide specifically states this and issues a warning about using the computer on one's lap.
I would assume that in following their "mission" of creating beautifully designed computers, Apple also wants to have a really silent one. Now I'm all for a quiet machine, but I feel as though if fans were on either (a) all the time or (b) when the CPU reaches the high 50s lots of people would be happier.
In fact the fans in the MBP are very quiet at least mine are. Unless you are in the hardware design business with intimate knowledge of using Core Duo chips in portable computers, then your observations, although certainly your opinion, are not based on anything factual.
Anyway, it's just a thought. I noticed there are lots of experts around here, so I'm just interested to hear what you guys think about this approach that Apple seems to have taken. I don't think the heat will stop me from getting this amazing notebook, but it certainly is a little frustrating.
More likely there are a lot of people around here who think they are experts. As the remark goes, "An 'expert' derives from ex, meaning 'has been', and spert, meaning 'drip under pressure.'"
You'll read lots of opinions on these forums. Don't take for granted that everything you read is factual or truth. A lot of the opinions expressed are without any basis in fact.

Copy Array Quick Question

Just a quick question.
Say I have an array A = [1,2,3,4,5]
B = new int[5]
I understand to copy the elements of A into B we could use a for loop.
But can somebody explain to me why you can't just go B = A?
Does this just cause B to point to A?
So how do arrays work exactly? Is it like in C where each element is actually a pointer to the data, or does Java copy the data directly into the array element?

Kayaman wrote:
JT26 wrote:
Array A=[1,2,3,4,5] ----> Here A is a reference variable which points to memory locations A[0],A[1],A[2],A[3],A[4] which could not be continueous.Actually no. What you have there is a syntax error. And please don't confuse people by talking about non continuous memory locations. That's simply wrong.And 100% irrelevant for the question at hand.
>
B = new int[5] -----> Here B is another reference variable points to an array which could hold 5 elemets.That is correct, basically.
All the five element holders of B could be physically any where in the memory, thus copying the the elements is done via a for loop.No, Java is smart enough to store arrays sequentially in memory. And the smart way to copy large arrays is System.arrayCopy().Or java.util.Arrays.copyOf.

Report Generation Toolkit Error Quick Question

Hi,
I created the most awesome LabVIEW report ever at my desk using a trial version of the RGT and Office 2003. I took this to my production machine and ")@#(&%(*#^%()^!!!" The production machine has office 2007 and a fully licensed version of the RGT. Both machines have LabVIEW 8.6.0. I've read all the stuff about these errors and something about classes and dll's and whatnot's. So my quick question, is: Instead of matching the versions of Microsoft Office as recommended, can I just rewrite from scratch the VI that creates this world's most awesome LabVIEW report on the production machine to create the same effect?
Solved!
Go to Solution.

Hi
Quick Answer: Probably
Slower answer: Microsoft changed a lot of things behind the scenes in Office 2007, but the Report Generation toolkit version 1.1.3 supports Office 2007 so you should be good to go. Depends on what functions are included in your VI. Liek the read me says "Several default settings in Microsoft Office 2007 differ slightly from previous versions. Reports you generate using Office 2007 might look different than reports you generate from other versions of Office because font sizes, cell sizes, and so on, differ."
Best Regards
David
NISW

Two quick questions about Library after moving beginning on a new computer

Hi there,
I just moved from Windows to Mac, meaning I had to move my iTunes library from the old PC to my new MBA.
Just a couple of quick questions.
1. When I started iTunes on my new Mac, in the preferences I directed the media folder to the folder with all my itunes music/podcasts etc, and then I imported the Library XML file. Is this incorrect? Should I have imported a different file? Should I have used the itl file instead?
If so, should I delete the library and start again? (if this is the case, please suggest the best way of doing this without affecting my media)
- a kind of sub-question to this one: some of the media files arent showing up in the iTunes library, but they are in the media folder on the ext HDD. Is there a way I can find out which ones havent been recognized by iTunes? Whats the best way of getting them in to my library?
2. Pretty much half of my podcasts have not been loaded in the new iTunes. The ones that havent were ones that I subscribed to on my iPhone, whereas the ones that show up in iTunes were ones I downloaded from iTunes. When I connect my iPhone and sync it with iTunes, will those podcasts show up in iTunes? Or is there a risk that they will be deleted from my iPhone?
Cheers,

The .xml is lacking some information such as ratings, date added, and play count. Using the .itl includes this information but cannot be imported using the method you did.
A complete library is everything in the iTunes folder. By using the method you did you left the artwork behind in the artwork folder on the other machine.
Selecting the media folder in preferences does not get iTunes to recognize the media. All it does is tell iTunes to start storing new media in that location.
Using the method I outlined nothing will be missed (with the exception of WMA) because you aren't rebuilding your library, you are using the one that already exists.
You don't have to re-copy everything as long as you get the stuff you missed and re-assemble it all as it was before except not on the Mac.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391

Quick question re select-options

Hi
I am relatively new to ABAP but have a quick question:
I need to create a select-options which does the following:
1. Allows ONLY "equals" signs
2. Disallows intervals
3. Disallows the use of ranges in the multiple selection box.
4. Allows multiple individual selections.
I can achieve most using the following:
select-options s_knvh for knvh-kunnr no intervals.
However, this still allows ranges using the multiple selection box, and also allows the "not equal to" option.
Adding the "no-extension" syntax simply removes my ability to use multiple individual entries.
Any ideas?
Thanks
Jon

Use this FM.
SELECT_OPTIONS_RESTRICT

A quick question about WebDynpro SLD and R/3 with concurrent users

Hello ,
I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3 for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
- I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
Thanks Ubergeeks,
Guy

Hi Guy
You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
Regards
Pran

Quick Question: Online or In-Store?

Similar Messages

Maybe you are looking for