Quick Question qith 59.94 fps output

Hello,
I have a varicam shot film that I need to export. It was edited in FCP 6 using a DVCPRO HD 59.94 FPS timeline. I would like to try making a 24p SD DVD, so would I export the full sequence, then use compressor's reverse telecine option in the mpeg encode? Or perhaps I was thinking of reimporting the 59.94fps final file back into a new sequence and using the DVCPRO HD Frame rate converter. What do you guys think?
thanks

The removal of the redundant frames needed to be done at the time of capture...before you edited. Now that you have edited, they cannot be removed if you want a good looking project. BUT...if the project LOOKS 24p...if it has that look, then you are fine. There is no reason that you MUST BE at 23.98...as long as it has the film cadence look. Just burn the DVD.
#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it amd select the top option "first play".
5. Now drag your QT from the broswer and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.
Shane

Similar Messages

Quick Question **PLEASE HELP** .jar file?

Hey everyone, im pretty new to the java scene but I have a really quick question that hopefully someone can help me with.
I'm really interested in making a .jar file out of my code. And basically I just want to make one. but i understand there are certain things like main class's, etc. that need to be made in order to make a .jar file.
So basically Say I opened up a new project in blueJ. I made 1 new class called "main." Inside of it I had nothing for conductors and no variables declaired untill the bottom part where i write my code.
say i write...
System.out.println("hello");
and that is it.
What steps from there do i do to make a jar file and have it be able to be executed and SEE the "hello" printed somewhere NOT in blueJ??
(I understand there is something about a "static" method? Im not really sure but if somoene could enlighten me on how to make a .jar file that would be great.)
Thanks a lot everyone!
Tom

I don't know anything about BlueJ, but this section of Sun's tutorial explains how to
write a program that outputs a single line of text to the console:
http://java.sun.com/docs/books/tutorial/getStarted/cupojava/win32.html
Deploying an application as an executable .jar file is covered here:
http://java.sun.com/docs/books/tutorial/deployment/jar/index.html
The first two sections - "Using JAR Files: The Basics" and "Working with Manifest
Files: The Basics" - contain the information you need to understand this process.

Quick question from future mac user

Hi there.
Just a quick question about the Intel iMacs.
Total noob with Macs so please forgive me, I'm looking to get away from Windows and PC's but not sure what I would need exactly.
Would the 24":3.06GHz Intel Core 2 Duo iMac with 4GBs of RAM and 1TB hdd be more than enough to handle video/audio editing with Final Cut Pro Studio, some gaming (such as newer MMO games or RPG/FPS games) and maybe running VMware Fusion for running Windows apps and games that I have/use that are either not available or not yet supported by Apple?
Or would I be looking at goin with the Mac Pro?
I'd rather shoot for the iMac because I'm SO tired of PC's and boxes and would like my computer to actually look nice as well as kick butt. But I'm just worried that if I got with the iMac I won't be able to perform those functions well or at all.
I love the look and feel of the iMac although I don't think you can get more than 4GBs of RAM or more than ONE hard drive inside (which isn't a big concern as I can always use external drives) so I'm just wondering if upgrading to the extra ram and hdd space from the get go would be a great help without having to worry about adding more later.
I'd like to be able to just use the iMac than the Mac Pro because the price difference seems to jump up quite a bit between iMac and Mac Pro. I'm just worried if that type of iMac setup wouldn't be enough for what I need.
Any suggestions or information would be greatly appreciated. Thanks.
Janin

The iMac in general is more than enough to perform those tasks well however the Mac Pro still has it's advantages. Lenn already went over those so take a look at these speed scores as they may help you to make your decision.
http://www.marketingtactics.com/Speedmark/
Either way I recommend getting the base RAM configuration from Apple and purchase RAM from OWC.
http://eshop.macsales.com/item/Other%20World%20Computing/6400DDR2S4MP/
http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=284&type=Memory&TI=0 655&shoupgrds=Show+Upgrades
George

Report Generation Toolkit Error Quick Question

Hi,
I created the most awesome LabVIEW report ever at my desk using a trial version of the RGT and Office 2003. I took this to my production machine and ")@#(&%(*#^%()^!!!" The production machine has office 2007 and a fully licensed version of the RGT. Both machines have LabVIEW 8.6.0. I've read all the stuff about these errors and something about classes and dll's and whatnot's. So my quick question, is: Instead of matching the versions of Microsoft Office as recommended, can I just rewrite from scratch the VI that creates this world's most awesome LabVIEW report on the production machine to create the same effect?
Solved!
Go to Solution.

Hi
Quick Answer: Probably
Slower answer: Microsoft changed a lot of things behind the scenes in Office 2007, but the Report Generation toolkit version 1.1.3 supports Office 2007 so you should be good to go. Depends on what functions are included in your VI. Liek the read me says "Several default settings in Microsoft Office 2007 differ slightly from previous versions. Reports you generate using Office 2007 might look different than reports you generate from other versions of Office because font sizes, cell sizes, and so on, differ."
Best Regards
David
NISW

Two quick questions about Library after moving beginning on a new computer

Hi there,
I just moved from Windows to Mac, meaning I had to move my iTunes library from the old PC to my new MBA.
Just a couple of quick questions.
1. When I started iTunes on my new Mac, in the preferences I directed the media folder to the folder with all my itunes music/podcasts etc, and then I imported the Library XML file. Is this incorrect? Should I have imported a different file? Should I have used the itl file instead?
If so, should I delete the library and start again? (if this is the case, please suggest the best way of doing this without affecting my media)
- a kind of sub-question to this one: some of the media files arent showing up in the iTunes library, but they are in the media folder on the ext HDD. Is there a way I can find out which ones havent been recognized by iTunes? Whats the best way of getting them in to my library?
2. Pretty much half of my podcasts have not been loaded in the new iTunes. The ones that havent were ones that I subscribed to on my iPhone, whereas the ones that show up in iTunes were ones I downloaded from iTunes. When I connect my iPhone and sync it with iTunes, will those podcasts show up in iTunes? Or is there a risk that they will be deleted from my iPhone?
Cheers,

The .xml is lacking some information such as ratings, date added, and play count. Using the .itl includes this information but cannot be imported using the method you did.
A complete library is everything in the iTunes folder. By using the method you did you left the artwork behind in the artwork folder on the other machine.
Selecting the media folder in preferences does not get iTunes to recognize the media. All it does is tell iTunes to start storing new media in that location.
Using the method I outlined nothing will be missed (with the exception of WMA) because you aren't rebuilding your library, you are using the one that already exists.
You don't have to re-copy everything as long as you get the stuff you missed and re-assemble it all as it was before except not on the Mac.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391

Is there a quick way to change audio hardware output?

Hello,
I have a Focusrite Scarlett 2i2 USB audio interface hooked up to my Windows 8 machine. I use it to record vocals in a sound booth. The sound booth is closed off from access to the computer, so I monitor my recordings throught the headphones connected to the Scarlett.
The problem I have is when I edit my files, I want to use my speakers connected to my computer. That is easy enough, I can go to the Audio Hardware settings in Audition and change the ouput from the Scarlett to the speaker output on my computer, but now I have no audio going to the headphones connected to the Scarlett should I need to make a quick re-record. I can output to the speakers directly from the Scarlett but the maximum volume is ridiculously quiet, which means I have to really crank the speakers volume high but if I get any audio through my PC, such as an e-mail alert or an alert sound (which the monitor speakers are also connected to) the volume is super loud.
I was wondering if any one knew of a way I can add a shortcut to the main Audition interface to easily switch between audio output sources?
Or even better would be to have dual audio output sources, so I can monitor on both the Scarlett headphone output and my Speakers attached to my PC.
I hope that makes sense and I would really appreciate any help.
Thank you
Mendoza

Hey, thanks for the ideas.
Yes, I am using Balanced TRS 1/4" connectors from the Focusrite, straight into the speakers. I also tried a pair of unballanced TRS cables and a pair of TRS to XLR connectors just in case it was the connection type causing a problem.
I would rather not use an amplifier between the Focusrite and the speakers. Unfortunately the Focusrite Scarlett is renowned for it's ridiculously low monitor output level, but adding a volume booster like an amp in the middle just seems to be boosting an unecessarily low signal, as can be seen on many forums. Really, the volume from the Focusrite monitor output should not be so low in the 1st place. Even when I connect my iPhone through it's line out connection to my speakers the volume is louder. I thought it was a defective Focusrite unit, so I replaced it but it wasn't, as the replacmenet was the same. However, the recording quality and the mic preamps are superb in the Focusrite, So I really like its recording capability.
The most frustrating thing is that the volume level coming out of my PC (I connect through the SPDIF output to a Cambridge DACmagic DAC and output via RCA interconnects to the speakers) is perfect. Nice, loud and crystal clear. I would much prefer to use this output to the monitor speakers, but then I have no sound to my headphones when I am in the booth. I don't want to connect my headphones to the PC as it is far away and there really is no need as the volume level and latency to the headphones is perfect through the Focusrite, I just need an easy way to either switch output sources in Audition or a way to output playback to both I think.
Thanks again for your help so far.

Quick question re select-options

Hi
I am relatively new to ABAP but have a quick question:
I need to create a select-options which does the following:
1. Allows ONLY "equals" signs
2. Disallows intervals
3. Disallows the use of ranges in the multiple selection box.
4. Allows multiple individual selections.
I can achieve most using the following:
select-options s_knvh for knvh-kunnr no intervals.
However, this still allows ranges using the multiple selection box, and also allows the "not equal to" option.
Adding the "no-extension" syntax simply removes my ability to use multiple individual entries.
Any ideas?
Thanks
Jon

Use this FM.
SELECT_OPTIONS_RESTRICT

A quick question about WebDynpro SLD and R/3 with concurrent users

Hello ,
I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3 for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
- I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
Thanks Ubergeeks,
Guy

Hi Guy
You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
Regards
Pran

QUICK QUESTION ABOUT PORTS

Hi, I have a quick question about port forwarding/mapping. My question, lets say I am running MSN messenger, who's ports are 6880-6900. But lets say I am running a torrent application or something else that requires those ports. If both applications were running at the same time, would this cause interference with them on the same ports or now. Thanks
Nathan

Normally, only one application can listen to a specific port number at a time. If MSN is grabbing those 21 ports then your torrent app won't be able to run.
However, most apps don't work that way - even if they use multiple ports, they don't use them all at the same time, so MSN might use 6880 when it starts up, leaving the others open for other applications to use if needed.
Only experimentation will answer that one.

2 Quick Question

Hello - I'm pretty new to Motion and have 2 quick questions:
1) If you've got a bunch of keyframes on a timeline and want to make the entire sequence longer - is there a way to just pull the last frame out and have it automatically interpolate the keyframes in between so that it keeps the same timing and everything... it just makes the whole sequence take longer?
2) On the same timeline with a bunch of keyframes, can you apply one long Interpolation (ala "Ease Out") to the entire thing from A-Z so that the whole sequence eases out rather than just keyframe to keyframe?
Thanks!!
Jason

Heya,
1. If you're asking if you have something like the "roving" keyframes in AE...well, kinda. Keyframes on footage, shapes, generators, particles, replicators—objects that create an image—don't seem to scale. But keyframes on secondary objects like behaviors and filters do scale.
2. Very easy: go into the Keyframe Editor and click on the animation state icon/menu for the parameter you want to change. The icon/menu is the last column after the parameter's value in the left-hand side of the Keyframe Editor. If you pick an interpolation type in that menu, it applies it to all keyframes in that particular curve. It's also the same place where you can set the before/after extrapolation, like ping-pong, progressive, etc.

Quick Question: When to use ( ) and when to use [ ] and why the ( *)

Hi all,
A quick question that i'm sure is very simple but is slightly confusing me. I've just started trying to learn Objective-C and am a little confused by ( ) and [ ].
I get that you use the [ ] brackets when you want something specific from an object, i.e.
[ textField textColor ]
and that you use ( ) brackets for things like:
if ( x == y) {
But I get confused when I see things like:
NSLog(@"some text here");
Why does that get ( ) brackets and why is it not [ ].
Also another point of confusion, creating methods... Why are some methods done like:
- (void)awakeFromNib
And others done like (with the additional "*" added):
- (NSString *)stringvalue
As I said, I'm sure this is very simple and obvious, but it is confusing me slightly.
Thanks in advance!

Adam:
As you already know, square brackets are used to send a message to an object, so if a object like myObject implements the method -doSomething, you can call it with:
\[myObject doSomething\];
The other use square for brackets have is to index C-style arrays, such as:
aValue = anArray\[10\]; // Get the 10-element of an array
However, because C-style arrays are rarely used in Cocoa applications (use NSArray instead) you will not see this situation often.
Parenthesis in expressions are used to group and prioritize, such as:
x = 10 * (3 + 5); // x = 80
If () statements use it to delimit the test expression. Same with while (). for () uses it to enclose the limits and increment statements, etc.
The other important use of parenthesis is in calling a C function:
result = foo(3);
means that you are calling the function named foo with the argument 3, and storing the the return value in the variable 'result'. This is different from a message because a C function is not a method of an object. They exist independently of any objects. NSLog() is a function defined within Cocoa but it is not a method. So, you call it with the traditional C function call syntax. Cocoa defines other functions like NSStringFromRect(), which takes an NSRect as argument and returns a pointer to an NSString.
And that leads me to your last question. Some methods return simple types, like int, float, or void (i.e. returns no value). These methods will have prototypes like:
\- \(void\)returnNothing;
\- (int)returnInteger;
Other methods return pointers to types, like:
\- (int \*)returnPointerToInteger;
\- (void \*)returnPointerToAnything; // In obj-C one typically uses id instead of void*
Returning whole objects from methods has problems and it is better to just return a pointer (the address in memory) instead:
\- (NSString *)makeAString;
The method above returns a pointer to an NSString rather than the entire object.
Good luck with your learning,
Juan-Pablo
Message was edited by: Juan Pablo Claude

Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Quick question regarding best practice and dedicating NIC's for traffic seperation.

Hi all,
I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc. I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this. What I mean is ...
- Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
- Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch? Is there some sort of ranking order of priority /importance? FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen? Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc

Quick Question - Setting up Personal Domain with godaddy

Hi there
Just a quick question to make sure I've done this correctly?
Ok, I've published my iWeb website.
I've purchased a personal domain with godaddy.
I've set up the personal domain in my mobile me account.
I then logged into my godaddy account and went to 'Total DNS Control and MX Records'
I changed the following under CNAME (Aliases)
www web.me.com 1 Hour
and then added a new CNAME Record
www.*******.com web.me.com 1 Hour
Have I done this all correctly?
Will it take a few hours to take effect?
Anything else I need to consider?
Thanks for reading.
Ross

CNAME settings can take up to 24 hours to take effect.
As long as you have forwarded your domain name to web.me.com, then it should be okay.

Currently have 10.4 but want to install snow leopard....quick question!!!

hey guys, i just have a quick question about my itunes
i have my music arranged by date added, which is very important
this is how i have it:
what i want to know is: is there a way to install the new OS, and somehow keep the music in the order that it is right now?
thanks a lot!!!! ----arthur

You'll probably get more help at the iTunes forum.
http://discussions.apple.com/forum.jspa?forumID=789

Quick Question qith 59.94 fps output

Similar Messages

Maybe you are looking for