Quick question re: Helix keyboard

So for the life of me I can't figure out how to fold the keyboard dock holder flat when I remove the tablet.  I.e., if I'm typing away and then decide to remove the tablet, the docking piece sits at a 90 degree angle (or whatever angle I had the screen at).
But I can't seem to get the section flat without docking the tablet, then folding it down flat, then removing the tablet from the keyboard.
I'm sure there's something simple I'm missing, some sort of latch or something?!
Thanks!

You can pull it out from the flat position. Just open the flap cover, press the button and pull out.
You can also force the closure but it requires much force without the leverage of the screen height.
It is just tight to keep the screen in position.

Similar Messages

  • Quick question about GT60 keyboard

    I think I have locked my Fn key. My keyboard gives me numbers when I use the space bar and several other keys. I have tried almost every combination of Fn + Numlock, Fn + F1-F12, Fn + Ctrl, holding down the Fn key for 10 seconds. I also did a quick system restore.
    Am I just using the wrong hotkeys to unlock it? Do I need to update my bios? Any other ideas?
    Thank you
    Edit: To clarify I am using a Dominator GT60 3k pro.

    Quote from: darkhawk on 23-November-14, 09:57:56
    First, go into your BIOS and see if the same thing is happening within the BIOS. If it is, then do an embedded/electronic controller (EC) reset.
    1. Turn laptop off
    2. remove AC power cord
    3. remove battery
    4. walk away for 10 minutes
    5. install battery
    6. install AC power
    7. turn laptop on and boot
    My left arrow key currently makes "w" and I couldn't navigate left in BIOS. I also tried the EC reset twice with no results. Does this mean theres something wrong with the physical connection in my keyboard?
    I had to send the laptop in to MSI for maintenance after the screen broke in a car accident about a month ago but the problem didn't start until yesterday. Could this be what is causing this?

  • Hi there, I just bought an iMac 2011.  Just a quick question.  Are those keyboard and mouse batteries that comes with the package are rechargeable?

    Hi there, I just bought an iMac 2011.  Just a quick question.  Are those keyboard and mouse batteries that comes with the package are rechargeable?  Thanks!

    Mine was bought last year and they were not; it they don't say "rechargeable". they're not. I started to use rechargeable as soon as the original batteries died.

  • Some quick questions before I purchase LE8..

    Hi all,
    I'm a longtime mac user and I just got into music production. I plan on mainly making Hip Hop beats and also record me playing bass on sampled tracks. I have already purchased an audio interface( PreSonus Firebox 6x10) and some monitors (KRK RP5's). I'm going to be purchasing LE8 and a MIDI keyboard soon, as well as a turntable for sampling vinyl sometime this week.
    I got some quick questions though. If I'm loading samples off vinyl into the ESX24 sampler in LE8, what program can I use within LE8 to cut the desired parts of the sample? Then assign them to my MIDI keyboard or Akai MPD24.
    I plan on hooking everything up to my 2.16ghz w/2MB Macbook and was wondering if it could withstand Logic. Also, will I need to update any drivers for the firebox? I remember reading problems about it working with Logic.
    Any help would greatly be appreciated. If any Hip Hop heads here have any tips/ suggestions, lemme know!
    Thanks,
    JC
    Message was edited by: sonofabass

    I'm not a big expert on audio recording, but other than the video card (which would not be a big factor for audio) you can't really upgrade it to much further than what you specified. You could increase the internal storage, but I've always been inclined to keep most of my personal files (things I am not actively working on now) on an external drive, and keep the OS, applications, and my current ongoing work on the internal drive, along with plenty of free space. I think that improves performance. If you did get the larger internal storage option, you might consider partitioning it into two volumes. You could keep your OS, apps, ongoing work, and that free space on one volume, and use the other volume for the long-term storage of your user files. Or maybe for your audio work, it is better to have a separate volume that is a dedicated +scratch space+, so if you had the larger internal drive, you can use that space more flexibly.
    One other consideration is the CPU speed. There is really very little difference between 2.93 GHz and 3.06 GHz. It's about 4%, but in the real world, the performance difference is probably even less. So you could trade the $150 for the slightly faster speed and get the extra internal storage for $100, saving you $50.
    Also, the online store has a page for clearance and refurbs (Special Deals). For example, this one is currently listed
    http://store.apple.com/us/product/FB419LL/A?mco=MjE0NDk5Mw
    It is the current gen iMac model. Note: Many of the items on the Special Deals section are previous generation Mac models (so keep that in mind if you look at other listings). My current iMac is a refurb. In my experience, the one Mac and two iPods I have purchased as refurbs have looked new. They just come in a plain brown box instead of the fancy retail packaging. The warranty is the same as new.

  • Report Generation Toolkit Error Quick Question

    Hi,
         I created the most awesome LabVIEW report ever at my desk using a trial version of the RGT and Office 2003.  I took this to my production machine and ")@#(&%(*#^%()^!!!"  The production machine has office 2007 and a fully licensed version of the RGT.  Both machines have LabVIEW 8.6.0.  I've read all the stuff about these errors and something about classes and dll's and whatnot's.  So my quick question, is:  Instead of matching the versions of Microsoft Office as recommended, can I just rewrite from scratch the VI that creates this world's most awesome LabVIEW report on the production machine to create the same effect? 
    Solved!
    Go to Solution.

    Hi 
    Quick Answer: Probably
    Slower answer: Microsoft changed a lot of things behind the scenes in Office 2007, but the Report Generation toolkit version 1.1.3 supports Office 2007 so you should be good to go. Depends on what functions are included in your VI. Liek the read me says "Several default settings in Microsoft Office 2007 differ slightly from previous versions. Reports you generate using Office 2007 might look different than reports you generate from other versions of Office because font sizes, cell sizes, and so on, differ."
    Best Regards
    David
    NISW

  • Two quick questions about Library after moving beginning on a new computer

    Hi there,
    I just moved from Windows to Mac, meaning I had to move my iTunes library from the old PC to my new MBA.
    Just a couple of quick questions.
    1. When I started iTunes on my new Mac, in the preferences I directed the media folder to the folder with all my itunes music/podcasts etc, and then I imported the Library XML file.  Is this incorrect? Should I have imported a different file? Should I have used the itl file instead? 
    If so, should I delete the library and start again?  (if this is the case, please suggest the best way of doing this without affecting my media)
    - a kind of sub-question to this one:  some of the media files arent showing up in the iTunes library, but they are in the media folder on the ext HDD.  Is there a way I can find out which ones havent been recognized by iTunes?  Whats the best way of getting them in to my library?
    2. Pretty much half of my podcasts have not been loaded in the new iTunes.  The ones that havent were ones that I subscribed to on my iPhone, whereas the ones that show up in iTunes were ones I downloaded from iTunes.  When I connect my iPhone and sync it with iTunes, will those podcasts show up in iTunes?  Or is there a risk that they will be deleted from my iPhone?
    Cheers,

    The .xml is lacking some information such as ratings, date added, and play count.  Using the .itl includes this information but cannot be imported using the method you did.
    A complete library is everything in the iTunes folder.  By using the method you did you left the artwork behind in the artwork folder on the other machine.
    Selecting the media folder in preferences does not get iTunes to recognize the media.  All it does is tell iTunes to start storing new media in that location.
    Using the method I outlined nothing will be missed (with the exception of WMA) because you aren't rebuilding your library, you are using the one that already exists.
    You don't have to re-copy everything as long as you get the stuff you missed and re-assemble it all as it was before except not on the Mac.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391

  • Quick question re select-options

    Hi
    I am relatively new to ABAP but have a quick question:
    I need to create a select-options which does the following:
    1. Allows ONLY "equals" signs
    2. Disallows intervals
    3. Disallows the use of ranges in the multiple selection box.
    4. Allows multiple individual selections.
    I can achieve most using the following:
    select-options s_knvh for knvh-kunnr no intervals.
    However, this still allows ranges using the multiple selection box, and also allows the "not equal to" option.
    Adding the "no-extension" syntax simply removes my ability to use multiple individual entries.
    Any ideas?
    Thanks
    Jon

    Use this FM.
    SELECT_OPTIONS_RESTRICT

  • A quick question about WebDynpro SLD and R/3 with concurrent users

    Hello ,
    I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3  for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
    - I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
    Thanks Ubergeeks,
    Guy

    Hi Guy
    You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because  a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
    For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
    Regards
    Pran

  • QUICK QUESTION ABOUT PORTS

    Hi, I have a quick question about port forwarding/mapping. My question, lets say I am running MSN messenger, who's ports are 6880-6900. But lets say I am running a torrent application or something else that requires those ports. If both applications were running at the same time, would this cause interference with them on the same ports or now. Thanks
    Nathan

    Normally, only one application can listen to a specific port number at a time. If MSN is grabbing those 21 ports then your torrent app won't be able to run.
    However, most apps don't work that way - even if they use multiple ports, they don't use them all at the same time, so MSN might use 6880 when it starts up, leaving the others open for other applications to use if needed.
    Only experimentation will answer that one.

  • 2 Quick Question

    Hello - I'm pretty new to Motion and have 2 quick questions:
    1) If you've got a bunch of keyframes on a timeline and want to make the entire sequence longer - is there a way to just pull the last frame out and have it automatically interpolate the keyframes in between so that it keeps the same timing and everything... it just makes the whole sequence take longer?
    2) On the same timeline with a bunch of keyframes, can you apply one long Interpolation (ala "Ease Out") to the entire thing from A-Z so that the whole sequence eases out rather than just keyframe to keyframe?
    Thanks!!
    Jason

    Heya,
    1. If you're asking if you have something like the "roving" keyframes in AE...well, kinda. Keyframes on footage, shapes, generators, particles, replicators—objects that create an image—don't seem to scale. But keyframes on secondary objects like behaviors and filters do scale.
    2. Very easy: go into the Keyframe Editor and click on the animation state icon/menu for the parameter you want to change. The icon/menu is the last column after the parameter's value in the left-hand side of the Keyframe Editor. If you pick an interpolation type in that menu, it applies it to all keyframes in that particular curve. It's also the same place where you can set the before/after extrapolation, like ping-pong, progressive, etc.

  • Quick Question: When to use ( ) and when to use [ ] and why the ( *)

    Hi all,
    A quick question that i'm sure is very simple but is slightly confusing me. I've just started trying to learn Objective-C and am a little confused by ( ) and [ ].
    I get that you use the [ ] brackets when you want something specific from an object, i.e.
    [ textField textColor ]
    and that you use ( ) brackets for things like:
    if ( x == y) {
    But I get confused when I see things like:
    NSLog(@"some text here");
    Why does that get ( ) brackets and why is it not [ ].
    Also another point of confusion, creating methods... Why are some methods done like:
    - (void)awakeFromNib
    And others done like (with the additional "*" added):
    - (NSString *)stringvalue
    As I said, I'm sure this is very simple and obvious, but it is confusing me slightly.
    Thanks in advance!

    Adam:
    As you already know, square brackets are used to send a message to an object, so if a object like myObject implements the method -doSomething, you can call it with:
    \[myObject doSomething\];
    The other use square for brackets have is to index C-style arrays, such as:
    aValue = anArray\[10\]; // Get the 10-element of an array
    However, because C-style arrays are rarely used in Cocoa applications (use NSArray instead) you will not see this situation often.
    Parenthesis in expressions are used to group and prioritize, such as:
    x = 10 * (3 + 5); // x = 80
    If () statements use it to delimit the test expression. Same with while (). for () uses it to enclose the limits and increment statements, etc.
    The other important use of parenthesis is in calling a C function:
    result = foo(3);
    means that you are calling the function named foo with the argument 3, and storing the the return value in the variable 'result'. This is different from a message because a C function is not a method of an object. They exist independently of any objects. NSLog() is a function defined within Cocoa but it is not a method. So, you call it with the traditional C function call syntax. Cocoa defines other functions like NSStringFromRect(), which takes an NSRect as argument and returns a pointer to an NSString.
    And that leads me to your last question. Some methods return simple types, like int, float, or void (i.e. returns no value). These methods will have prototypes like:
    \- \(void\)returnNothing;
    \- (int)returnInteger;
    Other methods return pointers to types, like:
    \- (int \*)returnPointerToInteger;
    \- (void \*)returnPointerToAnything; // In obj-C one typically uses id instead of void*
    Returning whole objects from methods has problems and it is better to just return a pointer (the address in memory) instead:
    \- (NSString *)makeAString;
    The method above returns a pointer to an NSString rather than the entire object.
    Good luck with your learning,
    Juan-Pablo
    Message was edited by: Juan Pablo Claude

  • Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

     

    Make sure that your bean is implementing the serializable interface and that
    you are accessing the bean from the session with the same name.
    Bryan
    "Sandeep Suri" <[email protected]> wrote in message
    news:[email protected]..
    Hi, I have quick question about use of USEBEAN tag in SP2. When I
    specify a scope of SESSION for the java bean, it does not keep the
    values that I set for variable in the bean persistent.Thanks,Sonny
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • Quick question regarding best practice and dedicating NIC's for traffic seperation.

    Hi all,
    I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc.  I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this.  What I mean is ...
    -     Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
    -    Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
    During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch?  Is there some sort of ranking order of priority /importance?  FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

    I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen?  Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc 

  • Quick Question - Setting up Personal Domain with godaddy

    Hi there
    Just a quick question to make sure I've done this correctly?
    Ok, I've published my iWeb website.
    I've purchased a personal domain with godaddy.
    I've set up the personal domain in my mobile me account.
    I then logged into my godaddy account and went to 'Total DNS Control and MX Records'
    I changed the following under CNAME (Aliases)
    www web.me.com 1 Hour
    and then added a new CNAME Record
    www.*******.com web.me.com 1 Hour
    Have I done this all correctly?
    Will it take a few hours to take effect?
    Anything else I need to consider?
    Thanks for reading.
    Ross

    CNAME settings can take up to 24 hours to take effect.
    As long as you have forwarded your domain name to web.me.com, then it should be okay.

  • Advance one frame at a time. Quick question.

    Hi, sorry for the really bad question but my keyboard does not have a page up and a page down button So what other short cut is there to do this? Is there a way I can assign my own shortcuts like FCP and Premiere? Thanks!...

    These keyboard shortcuts are given in After Effects Help.
    So is information about modifying keyboard shortcuts.

Maybe you are looking for