Quick Question. RE: ID CS5.5 and hovering

Has the everyting-everywhere-at-all-times-will-highlight-when-you-hover-your-cursor-over-it "feature" been adjusted in IDCS5.5 (Mac)?
I'm still using CS4, even though I have CS5, due to this "feature". I am considering a CS5.5 upgrade but would appreciate it if anyone can let me know the state of this "feature" in CS5.5.
Thanks!

Yes, you can turn off frame edge highlighting in CS5.5.
I’m locking this thread to avoid another rush of comments.
Bob

Similar Messages

Hi there, I just bought an iMac 2011. Just a quick question. Are those keyboard and mouse batteries that comes with the package are rechargeable?

Hi there, I just bought an iMac 2011. Just a quick question. Are those keyboard and mouse batteries that comes with the package are rechargeable? Thanks!

Mine was bought last year and they were not; it they don't say "rechargeable". they're not. I started to use rechargeable as soon as the original batteries died.

Cross platform upgrade question between Photoshop CS5/CS6 and multiple Windows/Mac computers

Hello,
I'm currently using a Windows laptop and PC running Photoshop CS5 from a Student license I got in college. I am considering moving to an Apple laptop so I was looking at the cross platform update question on the forum that led me here: Order product | Platform, language swap
It's not really clear if I will be eligible for the upgrade, and Adobe support chat sent me to the forum, and that page sends me back to where I started to see if I am eligible. I would prefer to purchase the upgrade outright, rather than pay for the new monthly subscription model.
If I am eligible for a swap/upgrade to Apple CS6, will I still be able to use CS5 on my Windows PC?
Thanks.

I don't have a definitive answer, but I have a feeling that a student teacher version is not eligible for an upgrade discount. You own the CS5 perpetual license, and can install it on two computers at the same time as CS6, CC etc. That will be the case in perpetuity. (not sure why I didn't just type 'forever' back there, or alert the cliche police 'Going forward')
Photoshop CS6 Extended will cost you just shy of US$1600 according to this Amazon page The non extended version does not give you the 3D tools, and Photoshop CC comes as the full extended version as standard. If you got the Photoshop / Lightroom Photography plan at a mere $10 a month, the price of CS6 would keep you subscribed for > three years. Photoshop CC has a lot of wonderful features CS6 does not have, and will never have, and CC will be be constantly updated 'in perpetuity'. ;-) $10 a month! Heck, what's not to like about that?!!!

Quick question about my flash site and facebook

I have a XML Flash template that I bought and customized to my likings, I used coda html editor to customize it, my question is how do I add the like button from face book, I went to facebook and did the steps to get my code to plug into my website, do I use the iframe code or the XBML code they gave and is ther eanything special I need to do code wise? it is not working when I copy and paste it, thanks for anyone who can help.

hi Chris951,
For the PowerDVD, is the image below the same error that you're getting?
- Link to picture
If it is, can you try the following:
1. After running the Power DVD 10 BD installer, close the error message and navigate to the C:\Drivers\PowerDVD 10 BD folder
2. Right click on Custom.ini and choose Edit (this will open Notepad). From here, look for the LEGEND Dragon entry and change it to Lenovo then save. When finished, run the setup.exe and PowerDVD should now install successfully.
- Link to picture
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Quick question re: waking from sleep and timing...

I've noticed that my MBP takes a while for the steady power light to turn to the pulsing power light when putting it to sleep, probably because of the backing up necessary.
Tonight I stepped away from using the laptop. It turned out I was away for longer than I thought I'd be. When I returned, the screen was dark, but the power light was steady on. Confused, I hit a few keys and the trackpad; it took longer than I thought (and longer than it usually does), but woke back up to my login screen per usual.
Considering my timing, I theorize that I returned JUST as it was backing up from sleep. If I'm right, would it "wait" for the sleep backup to complete before waking up? Or does it go to sleep differently when from idle than from active choice? Did I do any harm regardless of whether I'm right? (I assume not, since I'm sure this is a common situation, but just checking.)
Thanks!

Hi Matt!
when you export from iMovie to iDVD, does iDVD normally give you any 'heads-up' that it is working? how long does it normally take to open the project in iDVD?)
Yes, and it's instant.
What you should see is iDVD opening and asking you to create a new project, It will suggest naming it the same as the iMovie project.
There are reports that exporting from Imovie to iDVD can produce problems. What I do is save the iMovie project and close iMovie. Open iDVD, create the new DVD project, then go the File menu in iDVD, scroll down to Import, and in the side menu select Video. This open your Movie Folder, wherein resides your iMovie project. Select it and it imports into iDVD in a flash.
Remember: iMovie projects go in the Movies Folder, iDVD projects go in the Documents folder. Change that, and they get very confused and unhappy.

Quick question about exporting email address and their alias from Exchange 2007 mailbox

Hi Everyone,
We have Exchange 2007 and 2013 servers. All users are still 2007 servers. I have a list of users around 179 out of 3000 in a CSV file. I would like to export those 179 users primary smtp and their aliases. Is it possible to achieve through any script?
Thanks in advance.
Regards,
Siva

Hello Siva,
You don't need a script for this. Information can be obtained with simple command.
$AllUsers = Get-Mailbox -ResultSize Unlimited | Select DisplayName,Alias,PrimarySMTPAddress,SamACcountName,Database,LegacyExchangeDN
$AllUsers | Export-Csv Outputfile.csv -NoTypeInformation
Try this and let me know if it helps!
if you want PrimarySMTPAddress and alias of only those users whose information on the excel sheet, then what do you have as the column name in the excel sheet which you are using to query on the server.
Considering that you are using Alias to query the server to get the details you can try below:
$Global:Output = @()
$CsvData = Import-Csv Inputfile.csv
foreach($line in $CsvData)
{$CurrentObject = $Line.AliasWrite-Host “Processing Obect “$CurrentObject “From Csv File”
–ForeGroundColor YELLOW$EmailIDJoin = ""$EmailAddresses = @()$UserInfo = "" | Select DisplayName,PrimarySMTPAddress,Alias,SamAccountName,Database,LegacyExchangeDN,EmailAddresses
$UserInfo.DisplayName = (Get-Mailbox $CurrentObject).DisplayName
$UserInfo.PrimarySMTPAddress = (Get-Mailbox $CurrentObject).PrimarySMTPAddress
$UserInfo.Alias = (Get-Mailbox $CurrentObject).Alias
$UserInfo.SamAccountName = (Get-Mailbox $CurrentObject).SamAccountName
$UserInfo.Database = (Get-Mailbox $CurrentObject).Database
$UserInfo.LegacyExchangeDN = (Get-Mailbox $CurrentObject).LegacyExchangeDN
$EmailAddresses = (Get-Mailbox $CurrentObject)|%{$_.EmailAddresses}
for($i=0;$i -lt $EmailAddresses.Count;$i++)
$EmailIDJoin += $EmailAddresses[$i].ProxyAddressString
if($i -lt $EmailAddresses.Count - 1)
$EmailIDJoin += ','
$UserInfo.EmailAddresses = $EmailIdJoin
$Global:Output += $UserInfo
#Export output to CSV File
$Global:Output | Export-Csv GlobalOutput.csv -NoTypeInformation

Hi quick question regarding macbook aluminum 2008 and motion 3

I was just wondering if Motion 3 works on the macbook aluminum 2008.

Well it should work, but I've been having problems with the integrated GPU on my new MBP
http://peterwiggins.com/content/view/49/33/
Peter
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Question re Order of Sharpening and NR

Hello all,
Very quick question regarding order of sharpening and noise reduction. Is NR only supposed to be used to deal with sensor noise (like high ISO noise)? I ask because sharpening obviously introduces noise, which then could be tamed with NR (decreasing sharpness though, right?), but do you really want to do that? Are you supposed to do NR first, then sharpen up and live with the noise introduced therein?
Thanks, and I apologize for the stupid question!
Almost forgot--I do NOT have LR storing metadata in XMP files automatically (the checkbox in the catalog settings), but I noticed that after editing and adding metadata to photos, LR creates XMPs anyway. This confused me, but I checked the folder a little while later and noticed that all the XMPs are gone. Does LR temporarily create the XMPs before its stores in info in the catalog?
Thanks!
f1fan

The order in which you do things in Lightroom is meaningless...Lightroom processes images in its own order which has nothing to do with the order you set parameters.
And yes, Noise Reduction and Sharpening are really interrelated. It could be argued you shouldn't do one without doing the other. Noise Reduction is off by default but even well exposed low ISO images may need noise reduction to optimize the image when proper sharpening is applied.

A quick question about WebDynpro SLD and R/3 with concurrent users

Hello ,
I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3 for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
- I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
Thanks Ubergeeks,
Guy

Hi Guy
You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
Regards
Pran

Quick Question: When to use ( ) and when to use [ ] and why the ( *)

Hi all,
A quick question that i'm sure is very simple but is slightly confusing me. I've just started trying to learn Objective-C and am a little confused by ( ) and [ ].
I get that you use the [ ] brackets when you want something specific from an object, i.e.
[ textField textColor ]
and that you use ( ) brackets for things like:
if ( x == y) {
But I get confused when I see things like:
NSLog(@"some text here");
Why does that get ( ) brackets and why is it not [ ].
Also another point of confusion, creating methods... Why are some methods done like:
- (void)awakeFromNib
And others done like (with the additional "*" added):
- (NSString *)stringvalue
As I said, I'm sure this is very simple and obvious, but it is confusing me slightly.
Thanks in advance!

Adam:
As you already know, square brackets are used to send a message to an object, so if a object like myObject implements the method -doSomething, you can call it with:
\[myObject doSomething\];
The other use square for brackets have is to index C-style arrays, such as:
aValue = anArray\[10\]; // Get the 10-element of an array
However, because C-style arrays are rarely used in Cocoa applications (use NSArray instead) you will not see this situation often.
Parenthesis in expressions are used to group and prioritize, such as:
x = 10 * (3 + 5); // x = 80
If () statements use it to delimit the test expression. Same with while (). for () uses it to enclose the limits and increment statements, etc.
The other important use of parenthesis is in calling a C function:
result = foo(3);
means that you are calling the function named foo with the argument 3, and storing the the return value in the variable 'result'. This is different from a message because a C function is not a method of an object. They exist independently of any objects. NSLog() is a function defined within Cocoa but it is not a method. So, you call it with the traditional C function call syntax. Cocoa defines other functions like NSStringFromRect(), which takes an NSRect as argument and returns a pointer to an NSString.
And that leads me to your last question. Some methods return simple types, like int, float, or void (i.e. returns no value). These methods will have prototypes like:
\- $void$returnNothing;
\- (int)returnInteger;
Other methods return pointers to types, like:
\- (int \*)returnPointerToInteger;
\- (void \*)returnPointerToAnything; // In obj-C one typically uses id instead of void*
Returning whole objects from methods has problems and it is better to just return a pointer (the address in memory) instead:
\- (NSString *)makeAString;
The method above returns a pointer to an NSString rather than the entire object.
Good luck with your learning,
Juan-Pablo
Message was edited by: Juan Pablo Claude

Quick question regarding best practice and dedicating NIC's for traffic seperation.

Hi all,
I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc. I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this. What I mean is ...
- Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
- Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch? Is there some sort of ranking order of priority /importance? FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen? Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc

Quick Question about Cisco 3560 and the Web Device Manager

Alright, I have a quick question that I am curious about but I haven't found any information
about it.
When I log into my Cisco 3560 using the web portal to get to the Device Manager. Below the
diagram of the switch, then under the Dashboard there is section called Switch
Health, Port Utilization.
Under the Switch Health there is Bandwidth Used, Packet Error. Those two options just sit
at zero and do not move. The Port tilization graph is also sitting at zero.
Is there a way to make them functional?

Anyone notice performance increase or decrease of their HD when using the nVidia IDE SW drivers? particularly with a 74GB Raptor? I've also heard of burner issues when installing the IDE SW but have not used my burner yet.

Quick question: how can I save my project and posted in Facebook?

Quick question how can I save my project and posted in Facebook?

By using File>Save As or File>Save for Web. You can choose jpg or png.

IMovie - quick questions about video files when importing and optimizing

Hi, have some quick questions. I think they are simple.
1. When I import a video (from say iPhoto), where does it get "Move" or "Copy" to?
2. Why would I want to do "Copy" instead of "Move", because isn't it then taking up more space?
3. I'm wondering if after I optimize a video, I can stash away the original (non-optimized video that I either "Move"d or "Copy"d earlier) into an external hd.
4. By the way, what is the new file name of the optimized video?
Though things are working fine in iMovie and iPhoto, I'm trying to manage hard disk space, and hope answers to these questions will help.
Do you guys have a guideline on how to manage hard disk space when it comes to iphoto and imovie?
Thanks.

As has been suggested you can encourage people to download QuickTime player by doing something like this...
http://www.mirroroftheuniverse.com/Songs.html
You can also present your songs like this...
http://roddymckay.com/Satellite/JukeBox.html
This is a SnoCap jukebox and you need an account to use it but you'll get the link to ESnips on the above page.
A 3 minute song has a file size of about 30 Mb in AIFF format. Converting it to MP3 reduces it to about 3.5 Mb and M4A to about 5.5 Mb.
iTunes will do these conversions for you and M4A is far superior to MP3 as far as sound quality is concerned.

Quick Question: MobileMe and Info Tab in iTunes

Hi All
I'm new to the iPhone, but use a Macbook and MobileMe.
My very quick question is...
Should I be using the settings on the phone to sync to MobileMe while leaving the iTunes Info Tab settings unselected?
Hope that makes sense.
Thanks in advance.

Hi,
You can no longer sync contacts with iTunes 11.1.4 with mavericks OS X
http://support.apple.com/kb/PH12117
Jim

Quick Question. RE: ID CS5.5 and hovering

Similar Messages

Maybe you are looking for