Quick question re syncing

Please can someone help me with an issue when backing up/syncing phone.
I added a contact on my phone called test to use as a check. I then synced my phone by ticking the sync contacts to yahoo tab on the info page. After the syn had ended I checked yahoo and my phone and the test contact was gone.
I cant get my head around how the sync works and what you have to tick etc. Please can someone explain this to me in simple terms as Im not very technical.
Thank you so much.

I did use a test and the test contact disappeared from both phone and yahoo?

Similar Messages

Quick question about syncing?

Hello everyone. I'm a newbie and just encountered a small problem. When I imported a CD to my iTunes library, then synced it to my iPod, it comes up on my iPod three times. I deleted the CD from my iTunes library, then synced my iPod again, it is deleted from my iPod. I re-imported the CD to the library, then re-synced it, and still comes up three times on my iPod. What gives? Thank you, in advance, to all that respond.

A spelling or punctuation mistake, or sometimes a trailing space usually causes this after the artists and/or song name, which fools the iPod into thinking that there are two different artists or songs. The trailing space is the hardest to spot.
Best way to cure this is to go into iTunes, highlight that artist and/or songs, right click on them and select "get info".
This brings up the multiple song info window. If you see the "artist" field is left blank, then there is a discrepancy with that name.
So to correct this, in the artist or song box retype the name, as you would like it, and then click ok. You should do this even if no mistakes are immediately visible.
Re sync this new artist/song info to your iPod.
If the above is not the issue, try this also. Highlight all the songs for that artist, right click on them and select "apply sort field/same artist".
That often works.

Quick question about sync - sync communication

Hi All
How many receiver agrement , reciever determination do we need in sync-sync communication
let us say that a proxy send request to http and wait for the response.
in this case we need a http receiver channel but when the http sends the answer back to the waiting proxy , do we need another receiver channel and receiver agreement.
thanks

Hi Malu,
You need only one sender and receiver agreement.Refer to the below links which gives details of sync communication without using BPM.Which clearly state only one receiver agreement and determination.
/people/henrique.pinto/blog/2007/08/02/syncasync-scenarios-without-bpm
File - RFC - File without a BPM - Possible from SP 19.
These links will also help you in acheiving sync communication wothout BPM.
Please do let me know if u need furthur information.
Thanks,
Bhargav.
Note:Award Points if found useful

Two quick questions about Library after moving beginning on a new computer

Hi there,
I just moved from Windows to Mac, meaning I had to move my iTunes library from the old PC to my new MBA.
Just a couple of quick questions.
1. When I started iTunes on my new Mac, in the preferences I directed the media folder to the folder with all my itunes music/podcasts etc, and then I imported the Library XML file. Is this incorrect? Should I have imported a different file? Should I have used the itl file instead?
If so, should I delete the library and start again? (if this is the case, please suggest the best way of doing this without affecting my media)
- a kind of sub-question to this one: some of the media files arent showing up in the iTunes library, but they are in the media folder on the ext HDD. Is there a way I can find out which ones havent been recognized by iTunes? Whats the best way of getting them in to my library?
2. Pretty much half of my podcasts have not been loaded in the new iTunes. The ones that havent were ones that I subscribed to on my iPhone, whereas the ones that show up in iTunes were ones I downloaded from iTunes. When I connect my iPhone and sync it with iTunes, will those podcasts show up in iTunes? Or is there a risk that they will be deleted from my iPhone?
Cheers,

The .xml is lacking some information such as ratings, date added, and play count. Using the .itl includes this information but cannot be imported using the method you did.
A complete library is everything in the iTunes folder. By using the method you did you left the artwork behind in the artwork folder on the other machine.
Selecting the media folder in preferences does not get iTunes to recognize the media. All it does is tell iTunes to start storing new media in that location.
Using the method I outlined nothing will be missed (with the exception of WMA) because you aren't rebuilding your library, you are using the one that already exists.
You don't have to re-copy everything as long as you get the stuff you missed and re-assemble it all as it was before except not on the Mac.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391

Quick Question: MobileMe and Info Tab in iTunes

Hi All
I'm new to the iPhone, but use a Macbook and MobileMe.
My very quick question is...
Should I be using the settings on the phone to sync to MobileMe while leaving the iTunes Info Tab settings unselected?
Hope that makes sense.
Thanks in advance.

Hi,
You can no longer sync contacts with iTunes 11.1.4 with mavericks OS X
http://support.apple.com/kb/PH12117
Jim

Report Generation Toolkit Error Quick Question

Hi,
I created the most awesome LabVIEW report ever at my desk using a trial version of the RGT and Office 2003. I took this to my production machine and ")@#(&%(*#^%()^!!!" The production machine has office 2007 and a fully licensed version of the RGT. Both machines have LabVIEW 8.6.0. I've read all the stuff about these errors and something about classes and dll's and whatnot's. So my quick question, is: Instead of matching the versions of Microsoft Office as recommended, can I just rewrite from scratch the VI that creates this world's most awesome LabVIEW report on the production machine to create the same effect?
Solved!
Go to Solution.

Hi
Quick Answer: Probably
Slower answer: Microsoft changed a lot of things behind the scenes in Office 2007, but the Report Generation toolkit version 1.1.3 supports Office 2007 so you should be good to go. Depends on what functions are included in your VI. Liek the read me says "Several default settings in Microsoft Office 2007 differ slightly from previous versions. Reports you generate using Office 2007 might look different than reports you generate from other versions of Office because font sizes, cell sizes, and so on, differ."
Best Regards
David
NISW

Few questions about syncing

Hi,
I have a few questions about syncing. Since this is my first iphone and apple product, I'm not familliar with it. My mother bought the tomtom app for navigation. And she said that it has 3 uses (for 3 different devices). Now the app is in her library on her computer. So if i try to sync with her library, it will erase all my previous apps. How come? Also I'm planning to use a laptop in college so I'll have to sync it with that.
What should I do to keep my apps?

All 3rd party apps - paid and free apps include DRM protection which is tied to the iTunes account used to download the app. This is required by 3rd party app developers to prevent people from stealing from them with paid apps. If not for this, you could pay for and download the TomTom app which is not cheap and all your friends and family members with an iPhone could install the app on their iPhone without paying for it, which in effect is stealing.
There is no device limit for the number of iPods and iPhones that can be synced with the same iTunes library on the same computer, but in regards to all iTunes content - music, movies, tv shows, and 3rd party apps, an iPhone can be synced with an iTunes library on a single computer only, and photos can be transferred from a single computer only. When transferring iTunes content and photos from another computer, all iTunes content and photos transferred from a different computer will be erased from the iPhone first.

Quick question re select-options

Hi
I am relatively new to ABAP but have a quick question:
I need to create a select-options which does the following:
1. Allows ONLY "equals" signs
2. Disallows intervals
3. Disallows the use of ranges in the multiple selection box.
4. Allows multiple individual selections.
I can achieve most using the following:
select-options s_knvh for knvh-kunnr no intervals.
However, this still allows ranges using the multiple selection box, and also allows the "not equal to" option.
Adding the "no-extension" syntax simply removes my ability to use multiple individual entries.
Any ideas?
Thanks
Jon

Use this FM.
SELECT_OPTIONS_RESTRICT

A quick question about WebDynpro SLD and R/3 with concurrent users

Hello ,
I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3 for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
- I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
Thanks Ubergeeks,
Guy

Hi Guy
You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
Regards
Pran

QUICK QUESTION ABOUT PORTS

Hi, I have a quick question about port forwarding/mapping. My question, lets say I am running MSN messenger, who's ports are 6880-6900. But lets say I am running a torrent application or something else that requires those ports. If both applications were running at the same time, would this cause interference with them on the same ports or now. Thanks
Nathan

Normally, only one application can listen to a specific port number at a time. If MSN is grabbing those 21 ports then your torrent app won't be able to run.
However, most apps don't work that way - even if they use multiple ports, they don't use them all at the same time, so MSN might use 6880 when it starts up, leaving the others open for other applications to use if needed.
Only experimentation will answer that one.

2 Quick Question

Hello - I'm pretty new to Motion and have 2 quick questions:
1) If you've got a bunch of keyframes on a timeline and want to make the entire sequence longer - is there a way to just pull the last frame out and have it automatically interpolate the keyframes in between so that it keeps the same timing and everything... it just makes the whole sequence take longer?
2) On the same timeline with a bunch of keyframes, can you apply one long Interpolation (ala "Ease Out") to the entire thing from A-Z so that the whole sequence eases out rather than just keyframe to keyframe?
Thanks!!
Jason

Heya,
1. If you're asking if you have something like the "roving" keyframes in AE...well, kinda. Keyframes on footage, shapes, generators, particles, replicators—objects that create an image—don't seem to scale. But keyframes on secondary objects like behaviors and filters do scale.
2. Very easy: go into the Keyframe Editor and click on the animation state icon/menu for the parameter you want to change. The icon/menu is the last column after the parameter's value in the left-hand side of the Keyframe Editor. If you pick an interpolation type in that menu, it applies it to all keyframes in that particular curve. It's also the same place where you can set the before/after extrapolation, like ping-pong, progressive, etc.

Quick Question: When to use ( ) and when to use [ ] and why the ( *)

Hi all,
A quick question that i'm sure is very simple but is slightly confusing me. I've just started trying to learn Objective-C and am a little confused by ( ) and [ ].
I get that you use the [ ] brackets when you want something specific from an object, i.e.
[ textField textColor ]
and that you use ( ) brackets for things like:
if ( x == y) {
But I get confused when I see things like:
NSLog(@"some text here");
Why does that get ( ) brackets and why is it not [ ].
Also another point of confusion, creating methods... Why are some methods done like:
- (void)awakeFromNib
And others done like (with the additional "*" added):
- (NSString *)stringvalue
As I said, I'm sure this is very simple and obvious, but it is confusing me slightly.
Thanks in advance!

Adam:
As you already know, square brackets are used to send a message to an object, so if a object like myObject implements the method -doSomething, you can call it with:
\[myObject doSomething\];
The other use square for brackets have is to index C-style arrays, such as:
aValue = anArray\[10\]; // Get the 10-element of an array
However, because C-style arrays are rarely used in Cocoa applications (use NSArray instead) you will not see this situation often.
Parenthesis in expressions are used to group and prioritize, such as:
x = 10 * (3 + 5); // x = 80
If () statements use it to delimit the test expression. Same with while (). for () uses it to enclose the limits and increment statements, etc.
The other important use of parenthesis is in calling a C function:
result = foo(3);
means that you are calling the function named foo with the argument 3, and storing the the return value in the variable 'result'. This is different from a message because a C function is not a method of an object. They exist independently of any objects. NSLog() is a function defined within Cocoa but it is not a method. So, you call it with the traditional C function call syntax. Cocoa defines other functions like NSStringFromRect(), which takes an NSRect as argument and returns a pointer to an NSString.
And that leads me to your last question. Some methods return simple types, like int, float, or void (i.e. returns no value). These methods will have prototypes like:
\- \(void\)returnNothing;
\- (int)returnInteger;
Other methods return pointers to types, like:
\- (int \*)returnPointerToInteger;
\- (void \*)returnPointerToAnything; // In obj-C one typically uses id instead of void*
Returning whole objects from methods has problems and it is better to just return a pointer (the address in memory) instead:
\- (NSString *)makeAString;
The method above returns a pointer to an NSString rather than the entire object.
Good luck with your learning,
Juan-Pablo
Message was edited by: Juan Pablo Claude

Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Quick question regarding best practice and dedicating NIC's for traffic seperation.

Hi all,
I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc. I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this. What I mean is ...
- Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
- Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch? Is there some sort of ranking order of priority /importance? FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen? Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc

Quick Question - Setting up Personal Domain with godaddy

Hi there
Just a quick question to make sure I've done this correctly?
Ok, I've published my iWeb website.
I've purchased a personal domain with godaddy.
I've set up the personal domain in my mobile me account.
I then logged into my godaddy account and went to 'Total DNS Control and MX Records'
I changed the following under CNAME (Aliases)
www web.me.com 1 Hour
and then added a new CNAME Record
www.*******.com web.me.com 1 Hour
Have I done this all correctly?
Will it take a few hours to take effect?
Anything else I need to consider?
Thanks for reading.
Ross

CNAME settings can take up to 24 hours to take effect.
As long as you have forwarded your domain name to web.me.com, then it should be okay.

Quick question re syncing

Similar Messages

Maybe you are looking for