Quick question regarding IBM JRE

Is there anyone knows where to get IBM JRE1.4?? thanks

IBM has a 1.4 JRE, but I have not seen it available as a seperate download.
If you have any information on this, please pass it along.
Vijay

Similar Messages

  • Quick question regarding best practice and dedicating NIC's for traffic seperation.

    Hi all,
    I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc.  I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this.  What I mean is ...
    -     Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
    -    Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
    During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch?  Is there some sort of ranking order of priority /importance?  FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

    I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen?  Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc 

  • Just a quick question regards my mobo..

    I might possibly bricked my motherboard which I already ask a while back,, just a quick question,,, Now I did hooked up the powersupply to the motherboard alone,,, no other components,,, just the PSU and motherboard,,, then I use a paperclip to put static force on the motherboard's power button ( where powercables on the case should suppose to be in ),,, now the motherboard just keeps on blinking as my problem b4,, so its really the motherboard right??? I just want to confirm that the motherboard is the problem and no other components... thnks

    It is finally enough n2th2n. Don't open tons of threads for the same issue. For your board issue use your original thread: forum-en.msi.com/index.php?topic=184002
    Consider this a final warning.

  • Quick Question regarding an error with editable regions

    Hello,
    I am a co-op student and I work with other students as well, on our large company website. I have always been considered the cheif coder, and nobody knew the wesite layout and file directory as well as me. However, something terrible has happened while somebody was updating some information on one of your HTML pages.
    I logged in to Dreamweaver CS3 on afternoon to make a very simple text error change on our website. As soon as I hit "synchronize sitewide", it stated that there was no synchronization necessary, although I had already made a change. So then, on the template (.DWT) page, I thought I would backspace any character, and then retype it again in order for the "save" option to appear, so that I could save the template, and have it update all HTML pages, as well as the page that had just said "no synchronization necessary". I thought that I had to update the template first, which was strange, as I never had to do this before.
    When I clicked update, the error message that I got was that I have placed an editable region inside of a block tag. I checked the HTML pages as well as our template (.DWT) pages, and indeed, the <!--TemplateBeginEditable-->"Page Header"<!--TemplateEndEditable--> was embedded in a <h1></h1> pair. The pair appears black and delete-able in the template files, and grey in the HTML files, which is expected. However, I have been working at this institution for four months, and I recall that the <h1> tag pair had always been there since I remember. (How badly did this other person mess up?! =S)
    I tried to delete it from the .DWT file (the small editable region, and the <h1> tags), and now, what happens is that if I try to save a template so it updates all other HTML pages before synchronization, the template simply does not update anything, and I get no message whatsoever after clicking Save.
    Any help would be greatly appreciated. Thank you in advance for coping with these many details. I simply want to be able to update HTML pages again, because my boss really needs it, and I have never had such a problem before (having made much larger changes to this same website in the past)
    Thanks again,
    Mr. V

    How many child pages are you supporting with this DWT?   Hopefully less than 50 pages.
    Is your code valid?  HTML Validator - http://validator.w3.org
    Can you post a link to your DWT page, or copy and paste your code here?
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

  • Hi quick question regarding macbook aluminum 2008 and motion 3

    I was just wondering if Motion 3 works on the macbook aluminum 2008.

    Well it should work, but I've been having problems with the integrated GPU on my new MBP
    http://peterwiggins.com/content/view/49/33/
    Peter
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Quick question regarding "put" function on Dreamweaver CS5:

    Hey folks:
    I hope you'll bear with me.  I've inherited a website that uses CS5, and was given instructions...ambiguous at best...about updating the site.  In the past, I'm told (using CS3) the process was simply to update a template, save the template on our server, and "put" the page onto our site.  I've done the same, and in "previewing" the website, my updates appear correct.
    The only problem is the "put" function, or more specifically the lack thereof.  Under "site," there is a "put" function, but it is greyed out (and Ctrl + Shift + U is likewise fruitless).  Might anyone have a suggestion or two for how to get around this?  I'd be hugely appreciative.
    Thanks!

    In order to upload files to remote server, the site needs to be properly defined in DW CS5. 
    In CS3, go to Site > Manage Sites and Export the site definition settings .ste file to a safe place on your hard drive.  Close CS3.
    Open CS5, go to Site > Manage Sites > Import.
    Nancy O.

  • 2 Quick Question Regarding The Lights

    When playing is any of the lights stay on, to tell you that the iPod is on??
    Second:
    Do the lights flash or change colour once you reach the volume limit??
    Mine just flash green to indicate I pressed a button.
    Thanks

    compleidiot23 wrote:
    When playing is any of the lights stay on, to tell you that the iPod is on??
    No...
    Second:
    Do the lights flash or change colour once you reach the volume limit??
    IF a volume limit is set: three orange
    Mine just flash green to indicate I pressed a button.

  • Question Regarding Mesh with 3702 and non AC ap´s

    Hello! 
    quick question regarding MESH deployments with 2 different sorts of AP´s: AC and non-AC modells: If my 3702i is my root AP´s, and 3602i my MAP - will AC still work in 80Mhz, or will I have to switch to 40mhz (and thus crippling (???) AC performance?) 
    Not 100% sure on this... I *think* it should still work for the normal 802.11n connection, but I´m not sure if the 80mhz channel width (needed??) for AC, will cause the non-ac 3602i to be stranded? 
    Thanks alot for your insight! 

    Currently, my network DHCP server is a software based DHCP server. In reading over your post if I understood correctly it sounds like the managed switch would have its own hardware based DHCP server to assign IP addresses to those clients identified on the "external" VLAN. Did I understand that correctly or did misread something?
    DHCP server will be software based, even though you defined it on your switch, it is DHCP service running on its OS.
    I am configuring this setup for a small business application and will need to purchase a managed switch with 16 or 24 ports. Do you have any recommendations on a particular managed switch that will handle the VLAN configuration and include POE while keeping costs in mind.
    In this forum, most of us discussed about Cisco enterprise grade wireless. Here is 2960X series switch detail, if you are interested
    http://www.cisco.com/c/en/us/products/switches/catalyst-2960-x-series-switches/index.html
    You may need to check the pricing with your Cisco account manager or from a Cisco partner.
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • Quick question about making system calls

    hello all
    i have a simple quick question regarding making system calls. Basically I want to mimic the command "system" for perl. I am not quite sure how to do this for java.
    any feedback would be appreciated.

    look at:
    java.lang.RunTime

  • Questions regarding hard disk replacement in MacBook Pro Early 2008 Edition

    Hello -
    You folks probably get this a lot but I have a MacBook Pro Early 2008 edition and would like to upgrade the base 200 GB 5400 RPM drive to a Seagate Momentus 7200.4 drive. I have a few questions regarding this, and would appreciate any feedback.
    1) Does anybody know if installing a new hard drive in a MacBook Pro would cause the warranty to be invalidated? I don't believe a hard drive is considered a user replaceable part, at least from what I read, and I would like to know if replacing it myself would void AppleCare.
    2) Does anybody have any experience with the Segate Montentus 7200.4? I'm interested in how reliable the drive is and how much heat it generates. I've quickly discovered that I can use my MacBook Pro as an oven in tight spots and would like to prevent it from cooking its own internals.
    3 random) Does anybody know at what temperature the system actually overheats? I'm seeing 171 F and this is with smcFanControl turned up to the Higher RPM mode. I'm a little nervous when I'm running WoW and the system is averaging above 170 with smcFanControl totally cranked up to 6000 rpm.
    Thanks everyone!

    Thanks for that. I've had mixed results with both Seagate and WD, but less issues historically with WD. My experience with IBM/Hitachi makes is nearly impossible to recommend their products, so based on what I'm seeing the Western Digital Scorpio Black looks like the best bet. Do you happen to know if Apple will do hardware installations outside of warranty repair scenario's? Ripping open my only notebook to perform "involved" hardware maintenance is not something I'd prefer to do, even with my technical background.

  • Report Generation Toolkit Error Quick Question

    Hi,
         I created the most awesome LabVIEW report ever at my desk using a trial version of the RGT and Office 2003.  I took this to my production machine and ")@#(&%(*#^%()^!!!"  The production machine has office 2007 and a fully licensed version of the RGT.  Both machines have LabVIEW 8.6.0.  I've read all the stuff about these errors and something about classes and dll's and whatnot's.  So my quick question, is:  Instead of matching the versions of Microsoft Office as recommended, can I just rewrite from scratch the VI that creates this world's most awesome LabVIEW report on the production machine to create the same effect? 
    Solved!
    Go to Solution.

    Hi 
    Quick Answer: Probably
    Slower answer: Microsoft changed a lot of things behind the scenes in Office 2007, but the Report Generation toolkit version 1.1.3 supports Office 2007 so you should be good to go. Depends on what functions are included in your VI. Liek the read me says "Several default settings in Microsoft Office 2007 differ slightly from previous versions. Reports you generate using Office 2007 might look different than reports you generate from other versions of Office because font sizes, cell sizes, and so on, differ."
    Best Regards
    David
    NISW

  • Question regarding battery and warranty

    Hi all! I have a quick question about how and if my warranty applies to my battery. After about a year and a half of ownership (I have the three-year extended warranty), my battery has gone completely down the toilet. It wasn't a problem before, but this year I have to lug my T61p around a lot for lab work. My battery is now rated at... 39.75Wh when it shipped at 84.24Wh. This is a pretty drastic difference. In any case, I don't think that this is covered by warranty, but figured that I'd ask before I drop $180 on a new battery (ouch). And, speaking of, if my suspicions are correct, does anybody know where I might find a 9-cell battery for the T61p? All I'm seeing on Lenovo's website is the one for the N100... which doesn't... match very well. Yaknow.
    Thanks a lot!
    ThinkPad T61p [June 2008]: 2.5Ghz Penryn Core 2 Duo, 4GB DDR2 RAM, NVidia Quadro FX 570m 256MB, 160GB 7200RPM Fujitsu HDD, 1920x1200 WUXGA Matte LCD, Windows 7 RC1

    Is either of these appropriate? I'm wary of the one on Amazon, as there are other (off-brand) batteries that are advertised as being Lenovo ones (though those generally sell for  a lower price). The other one just looks like I'll have to call up to buy it.
    http://www.amazon.com/Lenovo-43R9255-ThinkPad-Notebook-Battery/dp/B001DX9EKA
    http://affordablepcsupply.com/products/IBM/REF/42T4511.html
    Thoughts?
    ThinkPad T61p [June 2008]: 2.5Ghz Penryn Core 2 Duo, 4GB DDR2 RAM, NVidia Quadro FX 570m 256MB, 160GB 7200RPM Fujitsu HDD, 1920x1200 WUXGA Matte LCD, Windows 7 RC1

  • Questions regarding customisation/configuration of PS CS4

    Hello
    I have accumulated a list of questions regarding customising certain things in Photoshop. I don't know if these things are doable and if so, how.
    Can I make it so that the list of blending options for a layer is by default collapsed when you first apply any options?
    Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
    Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
    Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
    Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
    Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
    These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
    I hope someone can provide some nice solutions

    NyanPrime wrote:
    <answered above>
    Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
    Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
    Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
    Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
    Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
    These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
    I hope someone can provide some nice solutions
    2.  No.  It's a sore spot that got some forum time when Photoshop CS4 was first released, then again with CS5.  It's said that the rules change slightly when using full-screen mode, though I personally haven't tried it.
    3.  Not sure, since I haven't tried it.  However, you may want to explore the Edit - Keyboard Shortcuts... menu, if you haven't already.
    4.  What buttons are you talking about?  Those you are creating in your document?  If so, choose the layer you want to lock in the LAYERS panel, then look at the little buttons just above the listing of the layers:
    5.  There are many, many options for positioning and sizing panels.  Most start with making a panel visible, then dragging it somewhere by its little tab.  One of the important features is that you can save your preferred layout as a named workspace.  Choose the Window - Workspace - New Workspace... to create a new named workspace (or to update one you've already created).  The name of that menu is a little confusing.  Once you have created your workspace, if something gets out of place, choose Window - Workspace - Reset YourNamedWorkspace to bring it back to what was saved.
    You'll find that panels like to "stick together", which helps with arranging them outside of the Photoshop main window.
    As an example, I use two monitors, and this is my preferred layout:
    6.  No, it's not possible to affect the layer names Photoshop generates, as far as I know.  I have gotten in the habit of immediately naming them per their usage, so that I don't confuse myself (something that's getting easier and easier to do...).
    Hope this helps!
    -Noel

  • Basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005 and there is no Microsoft office or Excel driver installed in Production

    Hi all,
    I got one basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005. I wanted to know How this package works in production where there is no Microsoft office or Excel driver installed. To check that there is excel driver installed
    or not, I followed steps: Start-->Administrative Tools--> Data Sources(ODBC)-->Drivers and I found only 2 drivers one is SQL Server and another one is SQL Server Native Client 11.0.
    Windows edition is Windows Server 2008 R2 Enterprise, Service Pack-1 and System type is 64-bit Operating System.
    We are running this package from SQL Server Agent and using 32-bit (\\Machine_Name\d$\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTExec.exe /FILE "\\Machine_Name\d$\ Folder_Name\EtL.dtsx" /CONFIGFILE "\\Machine_Name\d$\Folder_Name\Config.dtsConfig"
    /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E) to run this package. I opened the package and tried to find out what connection we have used and found that we have used "Excel Connection Manager" and ConnectionString=Provider=Microsoft.Jet.OLEDB.4.0;Data
    Source=F:\Fares.xls;Extended Properties="EXCEL 8.0;HDR=YES"; and source is ‘Excel Source’
    I discussed with my DBA and He said that SSIS is having inbuilt Excel driver but I am not convinced.
    Could anyone please clear my confusion/doubt?
    I have gone through various links but my doubt is still not clear.
    Quick Reference:
    SSIS in 32- and 64-bits
    http://toddmcdermid.blogspot.com.au/2009/10/quick-reference-ssis-in-32-and-64-bits.html
    Why do I get "product level is insufficient..." error when I run my SSIS package?
    http://blogs.msdn.com/b/michen/archive/2006/11/11/ssis-product-level-is-insufficient.aspx
    How to run SSIS Packages using 32-bit drivers on 64-bit machine
    http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
    Troubleshooting OLE DB Provider Microsoft.ACE.OLEDB.12.0 is not registered Error when importing data from an Excel 2007 file to SQL Server 2008
    http://www.mytechmantra.com/LearnSQLServer/Troubleshoot_OLE_DB_Provider_Error_P1.html
    How Can I Get a List of the ODBC Drivers that are Installed on a Computer?
    http://blogs.technet.com/b/heyscriptingguy/archive/2005/07/07/how-can-i-get-a-list-of-the-odbc-drivers-that-are-installed-on-a-computer.aspx
    Thanks Shiven:) If Answer is Helpful, Please Vote

    Hi S Kumar Dubey,
    In SSIS, the Excel Source and Excel Destination natively use the Microsoft Jet 4.0 OLE DB Provider which is installed by SQL Server. The Microsoft Jet 4.0 OLE DB Provider deals with .xls files created by Excel 97-2003. To deal with .xlsx files created by
    Excel 2007, we need the Microsoft ACE OLEDB Provider. SQL Server doesn’t install the Microsoft ACE OLEDB Provider, to get it we can install the
    2007 Office System Driver: Data Connectivity Components or
    Microsoft Access Database Engine 2010 Redistributable or Microsoft Office suit.
    The drivers listed in the ODBC Data Source Administrator are ODBC drivers not OLEDB drivers, therefore, the Excel Source/Destination in SSIS won’t use the ODBC driver for Excel listed in it by default. On a 64-bit Windows platform, there are two versions
    of ODBC Data Source Administrator. The 64-bit ODBC Data Source Administrator is C:\Windows\System32\odbcad32.exe, while the 32-bit one is C:\Windows\SysWOW64\odbcad32.exe. The original 32-bit and 64-bit ODBC drivers are installed by the Windows operating system.
    By default, there are multiple 32-bit ODBC drivers and fewer 64-bit ODBC drivers installed on a 64-bit platform. To get more ODBC drivers, we can install the 2007 Office System Driver: Data Connectivity Components or Microsoft Access Database Engine 2010 Redistributable.
    Besides, please note that 2007 Office System Driver: Data Connectivity Components only install 32-bit ODBC and OLEDB drivers because it only has 32-bit version, but the Microsoft Access Database Engine 2010 Redistributable has both 32- bit version and 64-bit
    version.
    If you have any questions, please feel free to ask.
    Regards,
    Mike Yin
    TechNet Community Support

  • Oracle 11.2.0.2g driver with IBM JRE(J2RE 1.5.0 IBM J9 2.3 Linux x86-32)

    Hi All,
    I am trying to use oracle 11.2 jdbc thin driver with IBM JRE and getting following exception messages.
    Details from Ojdbc5.jar
    Implementation-Version: 11.2.0.2.0
    Repository-Id: JAVAVM_11.2.0.2.0_LINUX_100812.1
    And Details from Java System Properties
    java.vm.info: J2RE 1.5.0 IBM J9 2.3 Linux x86-32 j9vmxi3223-20060504 (JIT enabled)
    J9VM - 20060501_06428_lHdSMR
    JIT - 20060428_1800_r8
    GC - 20060501_AA
    java.lang.ExceptionInInitializerError
    at java.lang.J9VMInternals.initialize(J9VMInternals.java:195)
    at javax.crypto.Cipher.getInstance(Unknown Source)
    at oracle.security.o5logon.O5LoginClientHelper.decryptAES(Unknown Source)
    at oracle.security.o5logon.O5LoginClientHelper.generateOAuthResponse(Unknown Source)
    at oracle.jdbc.driver.T4CTTIoauthenticate.doOAUTH(T4CTTIoauthenticate.java:655)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:366)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:536)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
    at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:38)
    at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:294)
    at org.apache.commons.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:1247)
    at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1221)
    at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880)
    at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:111)
    at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:77)
    at com.tes.archival.extractor.DataExtractorWithJdbcImpl.extractArchivalRecords(DataExtractorWithJdbcImpl.java:61)
    at com.tes.archival.executor.ExtractorExecutor$1.call(ExtractorExecutor.java:57)
    at com.tes.archival.executor.ExtractorExecutor$1.call(ExtractorExecutor.java:1)
    at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:284)
    at java.util.concurrent.FutureTask.run(FutureTask.java:138)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
    at java.lang.Thread.run(Thread.java:797)
    Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
    at javax.crypto.b.<clinit>(Unknown Source)
    at java.lang.J9VMInternals.initializeImpl(Native Method)
    at java.lang.J9VMInternals.initialize(J9VMInternals.java:177)
    ... 24 more
    Caused by: java.lang.SecurityException: Jurisdiction policy files are not signed by trusted signers!
    at javax.crypto.b.a(Unknown Source)
    at javax.crypto.b.a(Unknown Source)
    at javax.crypto.b.access$600(Unknown Source)
    at javax.crypto.b$0.run(Unknown Source)
    at java.security.AccessController.doPrivileged(AccessController.java:241)
    ... 27 more
    Any help in resolving this issue will be much appreaciated.
    Regards,
    Raman

    804915 wrote:
    Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
    Caused by: java.lang.SecurityException: Jurisdiction policy files are not signed by trusted signers!Probably a permissions problem. Or something is wrong with the certs.

Maybe you are looking for