Quick select tool doesn't work in photoshop CS5 extended

I can't get the quick selection tool to work in CS5 it does in CS4 does anyone have an answer for this?

I can capture the image in CS4 and wallah the back ground is gone...here in CS5 I have to had draw it (which I did just rapidly for this example) then I go to refine edge get the black screen with white outlines...or using the background screen image I just get the blank background with a light outline of the image ...????

Similar Messages

Quick Selection Tool doesn't work

This has probably been addressed, but can't seem to find it. It's driving me nuts.
In Elements 6.0, I have found the Quick Selection Tool quite useful. However, I often find that it does not work; not creating an outlined selection.
Have others found this? Do I have some setting incorrect? Is this an Adobe bug? I have reverted to all default settings, but no dice.
Thanks!

Ya, I can't make it work. I've watched a million videos online with people that seem to think it's amazing, but I have spent HOURS trying to cut out a simple image that would have taken me ten seconds on my ancient CS2. After owning this new product for two months I am still opening up my old version of Photoshop to extract images. Every time I start outlining something, the Quick Selection Tool goes all over the place, and when I do finally get it somewhat close to outlining what I want, I can't figure out how to save what I want. Lame.

Quick selection tool doesn't snap to to the nearest area. Working more like a lasso tool and the add layer button doesn't seem to creat the cutout that it should.

Quick selection tool in elements 13 doesn't snap to the nearest border area of the photo. Works more like a lasso. Also the add layer button when clicked on only brings up a black layer, not a black mask with a hole where I just cut.

Which OS are you working on?
Please try resetting your tools from Photo Bin flyout menu.
1. Open Photo bin.
2. Click on Fly Out menu
3. Click on option Reset all Tools
4. Relaunch Editor13
and see if it helps.
Thanks,
Anwesha

Quick selection tool doesn't "snap" to edges. It works more like the lasso tool.

When I try to make a quick selection it doesn't snap to the edges of the objects or the edge of the image.

My apologies - I "drilled down" the Adobe site through CC > Photoshop so I thought that information was picked up. I have found the solution in the meantime - I has set the brush size to very small - so I will mark this as complete.
Thanks for your guidance for future enquiries.
John

Quick Selection Tool Doesn't Use Shift in the Expected Manner

Generally speaking, if you click somewhere with a tool that you stroke on an image, then hold the Shift key down and click somewhere else, the tool will be stroked in a straight line from the prior point to the current point. This is very handy under certain conditions.
However, I was just using the Quick Selection Tool to select the shadow of a microphone, and lo and behold an attempt to drag it along a straight line by holding down the Shift key did nothing.
It would be nice if this tool would work like all the others, and stroke a line between where it was and where it's currently being clicked if the Shift key is held down.
-Noel

I guess I can see the conflict (Shift to add vs. Shift to stroke), but honestly I have learned to use the Quick Selection tool with the default "press nothing and it adds, press Alt and it subtracts" setting, and just never found a use for the mode change.
If you're curious about what I was trying to select, it was the microphone stand shadow on a white suit... And to be fair it was just a little more elbow grease to get the job done without the shift stroke capability.
-Noel

Define Custom Shape doesn't work in Photoshop CS5

It seems to be impossible to Define Custom Shape in Photoshop CS5. This option in Edit menu always remains grayed out...
Can anyone check and see if this is the case in your own installation of the program?
Very same procedure works in Photoshop CS4 just fine, but not in CS5...

Hi Fox,
I think you might just have found a bug there. I've reported it upstairs.

Why is PS CS4 Extended crashing when I use the quick selection tool, it was working fine yesterday..

...today I have updated the lastest software to version 11.02 and it is still crashing. Please can anyone help.

Without system information and the crash details nobody can say anything.
Mylenium

Photoshop freezes when I use quick selection tool

So every time i use the quick selection tool, on any image in photoshop I get a loading symbol and then I have to force quit the application. This only recently started happening and I have had the application for a few months.
Thanks

Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10

Mac CS6 Quick Selection tool stopped working

The Quick Selection Tool (QST) was working fine. Used the Lasso Toll and when I tried to use QST again it stopped working. Any help??
Chuck

Could you please post a screenshot with the pertinent Panels visible so we can see the Tool’s settings in the Options Bar and the selected Layer/s?

Quick select tool hangs and will not work

All of a sudden the quick select tool will not work/hangs up has a mind of its own and wanders/ after installing an upgrade to Nik software Color Efex Pro 4. I put that in the trash as I could not find a way to unistall. Probably still part of it in other areas?
Still did not work. Then I uninstalled PS 5.5 extended. Reinstalled to find it the same as before. All preference etc the same and a blank cach document show up in Bridge, did this before too. It is like I never uninstalled it.
What gives. How do I get a clean copy of PS?

You're welcome.
hiking11 wrote:
…do you know how to find the installer on a Mac so I can uninstall some of the Nik software…
There is no such thing as a system wide uninstaller on a Mac. Only a few select applications, like some of Adobe's, install an application-specific Uninstaller, e.g. in the Utilities folder of your root level ./Applications folder. I have no idea if Nik provides such an uninstaller or not.
hiking11 wrote:
…Where you are have a Great Christmas season…
Well, thank you. Actually, I'm not that far from you in Northern California, some 100 miles NE of San Francisco. My user ID, Tai Lao, is just a phrase that means Too Old in Mandarin, and my signature, Wo Tai Lao Le, 我太老了, just reads I am Too Old in Mandarin too, Happy holidays to you too/
Wo Tai Lao Le
我太老了

I have a comment. I am very upset with Photoshop and all your tutorials regarding the quick select tool. I have watched many tutorials and read instructions until I am blue in the face. This tool does not work. It is all over the place and all of your

I have a comment. I am very upset with Photoshop and all your tutorials regarding the quick select tool. I have watched many tutorials and read instructions until I am blue in the face. This tool does not work. It is all over the place and all of your tutorials make it look so simple. How can you advertise this as a viable tool when it just doesn't work?

It is all over the place and all of your tutorials make it look so simple.
This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
How can you advertise this as a viable tool when it just doesn't work?
Concluding something does not work because you fail at using it is not necessarily always justified.
The Quick Selection Tool certainly has limitations, but your post seems to be more about venting than trouble-shooting – otherwise you might have posted an image where you failed to get an expected result.

Why is the "Quick Selection Tool" working so slowly? - Photoshop CC in Windows 7

Every time I try to use the Quick selection tool, it takes a REALLY long time to select. I had CS5 and it was super fast, even with large RAW files. Now with CC, it takes at least 20 minutes to select a person out of a photo.
I already tried "resetting" the tool - that did not work at all.
Please help!

I mentioned working on my laptop without GPU acceleration, and how much it slowed everything down, but Quick Select was still laggy after the driver updated and GPU acceleration restored. This is a reasonable laptop with i7, 16Gb and GTX680. Thankfully, I got my main system back yesterday, and Quick select is pretty much instant.
But there shouldn't be that much difference. The big box has six core running at 4.2Ghz (under load) 32GB and GTX570, so while it is certainly more powerful, the difference in performance in respect to Quick Select is not proportional. I've just tried reducing cache levels on the big box from the '6' it usually runs at right down to 2, but it still responds instantly even with large files. I have GPU set to Advanced, and tile size to 128 on both systems.
Another odd thing is that I only have 1GB vRAM with the GTX570, where the GTX680 has 4Gb of faster vRAM. But maybe Quick select is not a big user of GPU acceleration.
So no real help I am afraid. I have looked through the GPU FAQ, but nothing helpful there. OK, I have just found a more detailed article on GPU acceleration, and it mentions a lot of features, but not Quick Select, so it could be that GPU is irrelevant. The laptop is Windows 8.1 as opposed win 7 for the big box, if that makes a difference. Can you correlate anything between our systems? I hate to post this without any suggestions, but I'm stumped.
There are tricks to aid Quick select.
Make a copy of the layer, and apply Curves and/or Levels directly to the layer, and try to increase contrast between the subject and background. Use this layer to make the selection, then switch back to the normal layer to use the selection.
I don’t know if this will work as I have just thought of it. Copy the layer, and Free Transform it to a smaller size. It will be image dependant, but Quick Select is much faster with images below about 1500 pixels wide. Use Quick select on the smaller image layer, and copy the selection to a new layer. FT it back up to size, and it should fit. This would only be useful if you are going to use Refine Edge right after, and will have obvious limitations.
Make sure you report back if you find a solution.

Magic Quick Selection Tool NOT working right. Help please?

We've used the magic quick selection tool lots and most of the time it works well.
It's very slow.............. v e r y slow and I'm wondering if there's a patch to download from Adobe or
what to do to fix this. We have pictures to edit and it's making the editing torture. Please help?
Thank you so much. tkccvalentine

It's the Quick Selection Tool in Photoshop Elements 9 and I'm trying to get the background and make it another layer so I can even out the color of the background then bring down the transparency. Not sure if that makes sense. I'm new to this.... Sometimes the area it will grab can go ...not fast.. but not slow. Sometimes it's like it's just messed up and literally takes 30 seconds to process each move. I rebooted my computer and re opened it and it helped a little. It's not clear what causes it when it messes up and when it doesn't. Just frustrating. It's probably user error because I'm so new at Photoshop. Thanks for your input. I really appreciate it.

Photoshop CS6 - Quick Selection tool freezes Photoshop/ becomes unresponsive for minutes

After only two selections the tool becomes unresponsive for minutes.
I'm on a 2.6 Ghz retina MacBook Pro, 16 Gb RAM, and this in connection with an SSD should make this tool very good to use. Operating system: OS X 10.8 "Mountain Lion", latest update.
Unfortunately, it seems to develop some kind of overload, during which you cannot use Photoshop at all. No commands like "undo selection", "quit", "close file" are accepted.
There is no beachball, no other signs that Photoshop is working on something.
Hint: it seems to happen when you option select (subtract from an existing selection).
Hint: the freeze can be shortened by a tool switch (has to be through clicking on a tool, keyboard commands are frozen as well)
Hint: the "subtract selection" move that caused the freeze appears after Photoshop comes back to life after a couple of minutes. The subtraction to the selection seems to be random, makes no sense, and is not the regular function of the tool.
First step after this freeze would be to undo the last selection, and continue working.
If you do several "add to selection" moves, they add up in a kind of waiting line. If you do the subtract from selection move, this doesn't work, and the freeze happens.
So far, I have not noticed the freeze when adding to a selection. Adding to a selection was always quick and instant. The bug must sit in the "subtract from selection" code.
On most freezes, the ants continue walking, I just had one (again with subtracting selection) where even the ants stopped walking.
I don't think it has anything to do with Photoshop working. I have used the quick selection tool regularly under CS5 on my old machine (which was a museum piece), and while I had to wait sometimes, it was never ground to a freeze/halt like the quick selection tool under CS6.

Did this work before, or has it always been this way? Not a bug or everyone with your system would be complaining. Have not seen that.
If it has always worked that way a reset of preferences will probably not do anything.
A reset of preferences will reset to factory defaults, so you will have to reset to saved workspace.
Do you have at least 10% free disk space?

Quick selection tool not working correctly

I am trying to extract a portion of a photo...i tried using the selection tool to extract the portion on another picture, and it worked GREAT!
Now i'm trying to use it in another photo and the refine image tool isn't extracting it into a new layer like it did with the other one!
is there something that i may have clicked or turned off that is preventing me from making this extraction??

Hello,
Could you be more specifc as to what you are doing here?
You mention using selections tools, including the Quick Selection tool, but these tools only create selections, they do not extract the material you have selected. A selection is like highlighting text in a word processor, after you have highlighted the text you can copy/paste it or modify it, but simply highlighting it doesn't do anything. Same with selections, once you have created a selection with a tool like Quick Selection you can how copy/paste it to a new image or perform adjustments to just that area.
I'm not sure what you mean by the "refine image tool", we don't have anything by that name. However, we do have a Refine Edge option that helps to make cleaner edges to your selection.
-Brett

Quick select tool doesn't work in photoshop CS5 extended

Similar Messages

Maybe you are looking for