Quick Selection Tool Problem - Cursor Stuck in Subtract

Hey All,
I somehow caused the quick selection tool default to be "on always" in the subtraction (minus - ) position; I am able to access the add (plus +) position by using the shift key , but this causes some problems as those are not the defaults keys for this tool or program for that matter.
Can anyone help?
2Divman

Be sure the tool isn't set to subtract in the options bar. Otherwise, try resetting the tool by right- or control-clicking the blue arrow just to the right of the tool preset (under the blue PS icon in the below screenshot) to reset the tool.

Similar Messages

  • Quick Selection Tool problem

    My Quick Selection Tool seems to be extremely quick to select the entire image.  Even with a very small size and very slow movement, I am having a hard time selecting what I intend to.  I don't remember having this problem a week ago.
    Is there a sensitivity level or something I am missing?  I do have the quick selection tool selected (not the wand) and I have reset the tool.
    I appreciate any help.  Thanks.

    I think I was having a trackpad tap-select snafu. I seemed to be able to scrub/protect an area with the minus selection tool before actually selecting anything and thought that was neat. But I can't replicate the behavior so I'm sure it was just me doing as I do. Maybe to OP can provide a link (the double-q seems interesting).

  • Quick  selection tool problem on windows via parallels on mac book pro

    Of course I am new here.  I am going through lessons (Classroom in a book) and get to lesson 3 to the point of cropping the image, the quick select tool  works.  After cropping I get the message:  Microsoft Visual C++ Runtime Error..., This application has requested the Runtime to terminate in an unusual way.  Please contact ...  Is it called crashing if now Photoshop closes down?  Of course I googled the issue, cleaned my registry and read a multitude of opinions and advice, deciding to just work around the problem by 'saving as' at appropriate moments.  I have done that lesson now often enough to know it in my sleep, however I am proceeding with the next lessons.  I am NOT very computer literate, so simplistically:  what is the problem, and who do I ask to fix it for me.
    Friendly greetings to all you talented people - Rose

    Can you assign more memory to the virtual machine (via the Parallels configuration menus)?
    Photoshop CS5 has had an update recently, 12.0.1.  If Help - About in Photoshop is showing 12.0.0 you should run the updater (Help - Updates...).
    It may be that the OpenGL drivers in Parallels aren't up to the requirements of Photoshop.  It's quite challenging to get OpenGL right in a virtual machine environment, and the virtualization companies are furiously releasing new versions with more and more graphics capabilities just so gamers will buy their software over the competition's.  Try disabling the OpenGL feature via Edit - Preferences - Performance and see if that helps.
    -Noel

  • Quick selection tool problem (CS5)

    Everytime I use the Quick selection tool in CS5 I always seem to get a unsmooth edge and also white lines (please see photo attached below).When I use the pen tool I dont get this problem. Any ideas guys? thank you very much.

    This is pretty normal. The Quick Selection tool is looking for borders between pixel values and, if they are not well defined, you get a fuzzy edge.
    The pen tool puts clear vector lines where you draw them.

  • Quick Selection Tool Problems in CS5-PC-Win7

    1) I am trying to use the QST to outline a butterfly and macaw. Problem is that while in the process of outlining the image, the QST stops at some point in the particular image outline form and goes to selecting the image square from corner to corner.
    The image that I was before trying to outline looses the "crawling ants" and just the rectangular border is now outlined.
    Am I doing something wrong?
    2) Next how do I create a new layer with mask so I can adjust the background?Thanks!
    Dan

    You're trying to convert a Selection into a Layer Mask?
    Try exactly these steps:
    1.  Make your selection of the foreground object (i.e., that which you want VISIBLE).
    2.  Press the Refine Edge button.
    3.  Make sure the Output To: selection is Layer Mask or New Layer with Layer Mask.
    4.  Complete the Refine Edge function.
    5.  Note carefully, in your LAYERS panel, what it created.
    -Noel

  • I'm trying to use the quick selection tool in Photoshop Elements 12 but it keeps getting stuck on minus.  How do I fix this?

    I'm trying to use the quick selection tool in Photoshop Elements 12 but it keeps getting stuck on minus.  I've reinstalled twice and it will work for a little while and then get stuck again.  When I select something, I have one shot at it and as soon as I let go of the mouse it switches to minus and I can't add anything else.  How do I fix this?

    When a tool misbehaves, go over to the far upper right corner of the tool options area and click the four-lined square. Choose Reset Tool from the popout menu.

  • Problem with 'quick select' tool.

    In my copy of CS5 Extended, when I select the 'quick select' tool, it takes forever for it to create the selection. During this time, the window is frozen - can't change anything else, can't select edit, can't select anything. Does anyone have any ideas why this might be happening?
    Thank you.

    The best way to fix this problem is to adjust your brush size and hardness. Set your spacing to about 25%. Your brush size (realistically) corresponds to your selected colors/exposure values and your hardness corresponds to the value rules you dictate. If you have an image that is varying degrees of red, make sure YOU KNOW what you want to be selected. For the majority of us, this is a hit/miss scenario but we all learn from our misses.
    This is probably NOT the venue where this problem should be addressed but I just wanted to offer you some insight.

  • I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes.   I hav

    I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I have viewed some videos and read numerous articles but haven't found the one to help me. Please point me in the best direction. Thank you Vincent TC

    For the sake of clarity and to save people time, Todd is asking about the behaviour of the Patch tool when using it to repair the area next to the young lad's head.  Todd gets a blurred dark tone pretty much regardless of the options he uses.
    IMO that's what I would expect to happen because of the close proximity of the other image elements i.e. the lad's neck and the strong lines of his shirt.  I would not choose to use the Patch tool in this situation.  Content Aware Fill makes a better stab at it. 

  • Quick selection tool preference

    My quick selection tool has reversed it's default position. Normally, when you open this tool, it's natural position is to add and you have to press alt ( on my pc ) to subtract. Mine is default subtract and you have to hit shift to add. Not a huge problem bit it's annoying. I've looked in preferences and can't see what I've done. It was okay until a couple of days ago ! Can anyone help ? I am using CS5 Windows 7.
    Regards,
    TL.

    Try re-setting the Tool:

  • LevelUp Level 4 Mission 13 Step 2 of 4: No further reactions after using the quick selection tool.

    The work is done.
    The flower is selectet. But now the 3 Step is failing.
    What´s wrong?

    Hi Mira. I have the same problem.  
    I got stuck in mission 13 - Copy an object out of photo. I already made selection with Quick Selection Tool. And then I tried all. I refined edges. I made a new layer, I saved a path, made a mask. But I am still on step 2 . What LevelUp wants? Can You help me please?

  • Quick Selection Tool

    I am having a problem with the quick selection tool.  When using this tool, the object that you select should automatically find the full edges of the object.  When I use this tool it does not do that, and I am wondering if there is anything else that I need to change or select for the tool to work properly?
    Thank you!

    Try resetting the tool first.
    Select the tool. Look for the down pointing arrow to the right of the tool, click on that. A box will open. Look for another arrow at the top right area and click on that. Go down the list and select reset tool. I am not positive but I think you have to restart PS for it to take effect.

  • ???quick selection tool in CS6 PS???

    Suddenly, it's not possible to select two-color object with the quick selection tool in CS6 PS. Only the outline is selected. Forced to go into the brush tool and manually select the whole object, or select by color only which creates it's own problems. Magic wand will only select the interior of the object, or the outline only, not the entire object. Where are the settings to disable this unfortunate development?

    Are you running a RGB image?
    To reset tool have it selected and right click on icon in upper left corner.

  • Quick selection tool always contains minus sign

    I am obviously not a very experienced Photoshop user and I have a question about the Quick Selection tool. I am using CS6 on a Mac with OS X 10.9 Mavericks.
    I watched a couple tutorials and my system is behaving differently. In the tutorials I watched, when the quick selection tool is chosen the "brush" contains a plus sign. If too much area is selected, that can be corrected by holding the option/alt key and this changes the brush to a minus sign. On my computer, when I select the tool the brush always contains a minus sign. I think the tool is working OK but I wonder why I never see the plus sign inside the brush.
    Please advise.
    Thank you.

    Be sure the tool isn't set to subtract in the options bar. Otherwise, try resetting the tool by right- or control-clicking the blue arrow just to the right of the tool preset (under the blue PS icon in the below screenshot) to reset the tool.

  • Quick selection tool only wants to make angular selections

    I'm using PS CC on a Mac, OS 10.9.4 . My quick selection tool suddenly decided to be heavily biased towards making angular selections. It REALLY does not want to follow curves.  I have restarted the computer and checked that the brush size and other options are set to values that have been working for me: no luck. I'd appreciate any hints as to how to get my quick selection tool back to behaving itself, TIA.

    Found the answer. I fixed the problem by checking "Sample All Layers"

  • Quick selection tool error message

    When I use the quick selection tool (or when I use content-aware scaling) I get an error message saying "could not complete your request because of a program error." I am working with NEF files, 4 GB of RAM, fast machine with plenty of scratch space, Radeon X1950 crossfire graphics card. With small .jpg files, the problem doesn't occur. Thanks for any help.

    That's right, Chris... and even when I turn it off, it seems erratic as to whether or not the scaling works. I just tried it again and couldn't get it to work without the program error message even when I turned it off. I suspect that if I reboot the whole machine it might work but I'm not sure. Something is buggy in there.

Maybe you are looking for

  • HOW TO PRINT THE MATTER IN FOR ALL ENTRIES

    HI HOW T  PRINT THE FOR ALL ENTRIES MATTER

  • Visual Studio Error in UNIX FTP for AIX

    I am using a VS2010 Web Site Project to access files on our AIX server (Unix). (Pre-compiled website). Using Add > Existing Web Site, I have established an FTP session within my project which shows all of the Unix files and folders. We just found out

  • Had photoshop elements trial before I bought PS CS6, now in LR4..

    I did the photoshop elements 11 trial before I bought PS CS6. I uninstalled elements, but now when I open the edit in choices, the elements.app is still listed. Anyone know how I get rid of this?

  • How to sync my iCal with my phone

    I am a seriously new iMac owner and I was wondering if I can sync my iCal with my Android phone?  If anyone knows I would really appreciate the help.

  • Source tables for Query views and book marks

    Hi Gurus, We are planning to recreate Query views based on a perticular query from ODS to cube. 1. Is there a table that can provide me all the query views created on the portal, Created by(User Name), description based on the query name. Basically i