Quick Selection Tool Problems in CS5-PC-Win7

1) I am trying to use the QST to outline a butterfly and macaw. Problem is that while in the process of outlining the image, the QST stops at some point in the particular image outline form and goes to selecting the image square from corner to corner.
The image that I was before trying to outline looses the "crawling ants" and just the rectangular border is now outlined.
Am I doing something wrong?
2) Next how do I create a new layer with mask so I can adjust the background?Thanks!
Dan

You're trying to convert a Selection into a Layer Mask?
Try exactly these steps:
1. Make your selection of the foreground object (i.e., that which you want VISIBLE).
2. Press the Refine Edge button.
3. Make sure the Output To: selection is Layer Mask or New Layer with Layer Mask.
4. Complete the Refine Edge function.
5. Note carefully, in your LAYERS panel, what it created.
-Noel

Similar Messages

Quick selection tool problem (CS5)

Everytime I use the Quick selection tool in CS5 I always seem to get a unsmooth edge and also white lines (please see photo attached below).When I use the pen tool I dont get this problem. Any ideas guys? thank you very much.

This is pretty normal. The Quick Selection tool is looking for borders between pixel values and, if they are not well defined, you get a fuzzy edge.
The pen tool puts clear vector lines where you draw them.

Quick selection tool problem on windows via parallels on mac book pro

Of course I am new here. I am going through lessons (Classroom in a book) and get to lesson 3 to the point of cropping the image, the quick select tool works. After cropping I get the message: Microsoft Visual C++ Runtime Error..., This application has requested the Runtime to terminate in an unusual way. Please contact ... Is it called crashing if now Photoshop closes down? Of course I googled the issue, cleaned my registry and read a multitude of opinions and advice, deciding to just work around the problem by 'saving as' at appropriate moments. I have done that lesson now often enough to know it in my sleep, however I am proceeding with the next lessons. I am NOT very computer literate, so simplistically: what is the problem, and who do I ask to fix it for me.
Friendly greetings to all you talented people - Rose

Can you assign more memory to the virtual machine (via the Parallels configuration menus)?
Photoshop CS5 has had an update recently, 12.0.1. If Help - About in Photoshop is showing 12.0.0 you should run the updater (Help - Updates...).
It may be that the OpenGL drivers in Parallels aren't up to the requirements of Photoshop. It's quite challenging to get OpenGL right in a virtual machine environment, and the virtualization companies are furiously releasing new versions with more and more graphics capabilities just so gamers will buy their software over the competition's. Try disabling the OpenGL feature via Edit - Preferences - Performance and see if that helps.
-Noel

Quick Selection Tool Problem - Cursor Stuck in Subtract

Hey All,
I somehow caused the quick selection tool default to be "on always" in the subtraction (minus - ) position; I am able to access the add (plus +) position by using the shift key , but this causes some problems as those are not the defaults keys for this tool or program for that matter.
Can anyone help?
2Divman

Be sure the tool isn't set to subtract in the options bar. Otherwise, try resetting the tool by right- or control-clicking the blue arrow just to the right of the tool preset (under the blue PS icon in the below screenshot) to reset the tool.

Quick Selection Tool problem

My Quick Selection Tool seems to be extremely quick to select the entire image. Even with a very small size and very slow movement, I am having a hard time selecting what I intend to. I don't remember having this problem a week ago.
Is there a sensitivity level or something I am missing? I do have the quick selection tool selected (not the wand) and I have reset the tool.
I appreciate any help. Thanks.

I think I was having a trackpad tap-select snafu. I seemed to be able to scrub/protect an area with the minus selection tool before actually selecting anything and thought that was neat. But I can't replicate the behavior so I'm sure it was just me doing as I do. Maybe to OP can provide a link (the double-q seems interesting).

Photoshop CS6 - Quick Selection tool freezes Photoshop/ becomes unresponsive for minutes

After only two selections the tool becomes unresponsive for minutes.
I'm on a 2.6 Ghz retina MacBook Pro, 16 Gb RAM, and this in connection with an SSD should make this tool very good to use. Operating system: OS X 10.8 "Mountain Lion", latest update.
Unfortunately, it seems to develop some kind of overload, during which you cannot use Photoshop at all. No commands like "undo selection", "quit", "close file" are accepted.
There is no beachball, no other signs that Photoshop is working on something.
Hint: it seems to happen when you option select (subtract from an existing selection).
Hint: the freeze can be shortened by a tool switch (has to be through clicking on a tool, keyboard commands are frozen as well)
Hint: the "subtract selection" move that caused the freeze appears after Photoshop comes back to life after a couple of minutes. The subtraction to the selection seems to be random, makes no sense, and is not the regular function of the tool.
First step after this freeze would be to undo the last selection, and continue working.
If you do several "add to selection" moves, they add up in a kind of waiting line. If you do the subtract from selection move, this doesn't work, and the freeze happens.
So far, I have not noticed the freeze when adding to a selection. Adding to a selection was always quick and instant. The bug must sit in the "subtract from selection" code.
On most freezes, the ants continue walking, I just had one (again with subtracting selection) where even the ants stopped walking.
I don't think it has anything to do with Photoshop working. I have used the quick selection tool regularly under CS5 on my old machine (which was a museum piece), and while I had to wait sometimes, it was never ground to a freeze/halt like the quick selection tool under CS6.

Did this work before, or has it always been this way? Not a bug or everyone with your system would be complaining. Have not seen that.
If it has always worked that way a reset of preferences will probably not do anything.
A reset of preferences will reset to factory defaults, so you will have to reset to saved workspace.
Do you have at least 10% free disk space?

When I click on the "quick selection tool" and try to select something, it just "draws a line"

When I click on the "quick selection tool" in Photoshop CS5, and try to select something, it just "draws a line" as if the diameter were very thin and it dones't select anything.
Thanks.

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Problem with 'quick select' tool.

In my copy of CS5 Extended, when I select the 'quick select' tool, it takes forever for it to create the selection. During this time, the window is frozen - can't change anything else, can't select edit, can't select anything. Does anyone have any ideas why this might be happening?
Thank you.

The best way to fix this problem is to adjust your brush size and hardness. Set your spacing to about 25%. Your brush size (realistically) corresponds to your selected colors/exposure values and your hardness corresponds to the value rules you dictate. If you have an image that is varying degrees of red, make sure YOU KNOW what you want to be selected. For the majority of us, this is a hit/miss scenario but we all learn from our misses.
This is probably NOT the venue where this problem should be addressed but I just wanted to offer you some insight.

OpenGL seemingly deactivates after use of quick selection tool (PS CS5)

Before using the quick selection tool, I am able to smoothly zoom in and out by holding Ctrl+Space and dragging with the mouse.
If I use the quick selection tool, however, the marching ants line turns into a strange box. I no longer am able to zoom smoothly but instead with the technique above I draw a rectangle which I zoom into. This indicates to me, that OpenGL has been deactivated. I want my smooth zoom back!
I noticed that the preferences always show OpenGL as active, no matter which of the above "state" I'm in. I tried updating my AMD graphics card's driver without success. I found a post describing similar OpenGL problems on the same graphics card and installed the linked driver; the post was 2 years old, but it worked. Re-installing more recent version (Catalyst-Version 12.6) brought the problem back. Newer versions of the driver seem all to suffer from the same problem.
I'm using
Windows 7 64-bit,
64-bit Photoshop Extended from CS5 Production Premium,
AMD Radeon HD 4600 (currrently Catalyst-Version 13.1).
I tried:
"Downgrading" the driver (only really old version worked, as mentioned above),
reseting Photoshops preferences (Ctrl+Alt+Shift at start),
deactivating OpenGL (reactivating only works after restart and problem reappears) but I miss the smooth zoom.
I hope I could clarify the problem and thank you for reply!

I seriously can't download version 13.4...
This is my input for the driver search on their homepage (I'm German, that's why some words are German...):
This is the result I get from the above input:
I have not a single clue, how I am supposed to download another version than the current. AMD makes it really difficult for me.
Maybe someone could post a link to another version? That would be really nice!
Also I tried the "Driver Autodetect". Catalyst-Version 13.1 is now installed...
This actually seems to be a thread for the AMD-Support, but maybe someone knows a workaround?

Quick Selection Tool Crashes CS5?

Hello, Recently when I've gone to use the Quick Selection Tool I see no "marching ants" and CS5 crashes a couple of seconds after finishing the brush stroke. I've replaced the graphics card and installed the latest GPU driver. I uninstalled Photoshop and reinstalled it. My system description is below my sig. Has anybody seen this behavior?
Thanks, - Dave
ASUS P5Q Deluxe LGA775, P45/ICH10R
Intel Core 2 Quad Q9300 LGA775
ARCTIC COOLING Freezer 7 Pro HS (Stock heatsink for now)
Mushkin 4GB Ascent (2 x 2GB) 240-Pin DDR2 1066 P/N 996619 (only one stick installed at present)
Corsair CMPSU-750TX 750W PSU
ASUS EN8800GT/HTDP/512M GeForce 8800GT GPU == ORIGINAL GPU ==
Zotac 288-2N115-000ZT GeForce 9800GT 512MB DDR3 256B == NEW GPU ==
HDD (C) WD740ADFD SATA1 74GB HD 10K RPM 16MB for OS
HDD (D) Hitachi Deskstar 7K1000 SATA2 1Tb for Data
HDD (E, F, G) WD740ADFD SATA1 74GB HD 10K RPM 16MB for Apps; Photoshop temp file; Web Development; Windows Pagefile
Lite-On ATAPI iHAS124 A DVD±R DVD SATA DVD Drive
MS Windows XP Professional SP3 32 bit
Monitor NEC MultiSync LCD2190 UXi

Hi Noel,
Yeah, I kind of made a long story short. I have a display anomaly as well. Two different display cards, two different driver families. Here's the URL for that thread:
http://forums.adobe.com/message/2974532#2974532
Removing all remnants of drivers usually includes editing the registry. I haven't come across instructions of what to do in that regard. I uninstalled CS3 (my most recent PS version) and uninstalled all plugins except Portraiture by Imagenomic. Portraiture crashes Photoshop a lot when I use it. After installing CS3 I defragged my drives then ran CCleaner and cleaned the registry. After uninstalling CS5 I defragged again and reinstalled it.
There is something badly wrong with my system, but it only shows up when using PS CS5. Is there a diagnostic for driver conflicts?
This is my last system running Windows XP. I plan on retiring it as soon as I can bring my latest build up to snuff. I'm dreading installing Office 2007 on the now PC and having activation problems. I want to make sure Office works on the new PC before decommissioning the one this thread is about. I'm also waiting for Dreamweaver CS5. DW 8 won't run on the new Windows 7 64-bit PC. I ordered it four days ago and can't get a response from Newegg. I should have had it today, but my order is still showing "charged"!
Computers-R-Fun, aren't they?
- Dave

Quick select tool doesn't work in photoshop CS5 extended

I can't get the quick selection tool to work in CS5 it does in CS4 does anyone have an answer for this?

I can capture the image in CS4 and wallah the back ground is gone...here in CS5 I have to had draw it (which I did just rapidly for this example) then I go to refine edge get the black screen with white outlines...or using the background screen image I just get the blank background with a light outline of the image ...????

Quick Selection tool in CS5 doesn't select everything

I hope I am posting in the correct place. If not, please tell me where to post my question, thanks.
I am using the quick selection tool to select my image. When I click on 'Refine Edge' it looks great. When I output to a new layer or new document, etc., parts of the image are missing.
For example, I have an image of two girls (attached). When I click 'Refine Edge,' it looks just the way I want. But if I choose to put it into a new document or new layer, the red-haired girl's hands and legs disappear. This isn't the first time this has happened - I just finally got frustrated enough to ask for help. Thanks and let me know what I am doing wrong.
(The first is B&W in 'refine edge', the second is Overlay view in 'refine edge', and the last one is the results (with disappearing hands and legs)

I assumed it wouldn’t help based on other comments. Using Mac OS X 10.9.3, ID CSS 6 version 8.
I just logged out and then logged in and the problem cleared up but did the same thing before and it cleared up and then came back. Any ideas why this is intermittent?
Thanks.

Quick Selection Tool CS5

When Using Quick Selection Tool In CS5 it shuts down my whole computer? Have disabled Open GL and quit and reopened PS...

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I hav

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I have viewed some videos and read numerous articles but haven't found the one to help me. Please point me in the best direction. Thank you Vincent TC

For the sake of clarity and to save people time, Todd is asking about the behaviour of the Patch tool when using it to repair the area next to the young lad's head. Todd gets a blurred dark tone pretty much regardless of the options he uses.
IMO that's what I would expect to happen because of the close proximity of the other image elements i.e. the lad's neck and the strong lines of his shirt. I would not choose to use the Patch tool in this situation. Content Aware Fill makes a better stab at it.

Quick selection tool preference

My quick selection tool has reversed it's default position. Normally, when you open this tool, it's natural position is to add and you have to press alt ( on my pc ) to subtract. Mine is default subtract and you have to hit shift to add. Not a huge problem bit it's annoying. I've looked in preferences and can't see what I've done. It was okay until a couple of days ago ! Can anyone help ? I am using CS5 Windows 7.
Regards,
TL.

Try re-setting the Tool:

Quick Selection Tool Problems in CS5-PC-Win7

Similar Messages

Maybe you are looking for