Quick Tag Editor Dropdown Application Error

I just installed Adobe Dreamweaver CS 5 and this thing has been crashing like crazy with error "Quick Tag Editor Dropdown - Application error." What is this Quick Tag Editor Dropdown and how do I get rid of this error? Any one experiencing same?
Do I need to go back to cfeclipse?

I can't really imagine many people on here use DreamWeaver to be honest, personally I'd take Eclipse any day. As it's a non-CF-specific question, I suspect you'd have more luck on the DreamWeaver forums.

Similar Messages

Quick Tag Editor not working on my Mac

I am on lesson 4 in "Adobe Dreamweaver CC Classroom in a book" and am at a point where I am instructed to insert an Image Placeholder. The instructions has me insert the cursor into text within tags and press the left-arrow key. It states the cursor will then be placed outside the opening tag, which does not work. Then with a key combination the QTE is supposed to open with cursor now inside new brackets. None of the above works. I am in split view. If I can provide anymore info or a screen grab let me know, but I can't even get the QTE to open when I place the cursor in the correct position...
Thanks...
**NOTE**If I am inside the tags the Cmd-T command to bring up QTE works. However, when the cursor is placed outside the and inside the <aside> the Cmd-T QTE will not come up as instructed. Obviously I can enter the code in Code edit, but as instructions direct it does not work.

Preran, Thanks. It works now when I select the selector as mentioned in the video. I assumed the selector mentioned in step 1. below meant the CSS Selectors Window/pane. However when clicking the selector below the split/design window it works. I included the instructions below which seem to be ambiguos at best. Maybe I have simply missed something that was mentioned before.
Thanks again and we can consider this resolved, unless the book authors wants to make a change to the instructions which seems to be needed.
Thanks,
David In Texas....
1. Insert the cursor into the text directly below the vertical menu. Click the tag selector. The placeholder image should not be inserted within the element. If it were, it would inherit any margins, padding, and other formatting applied to the paragraph, which could cause it to disrupt the layout.
Tip Use Split view whenever you’re unsure where the cursor is inserted.
2. Press the Left Arrow key. As you have seen in earlier exercises, the cursor moves to the left of the opening tag in the code but stays within the < aside > element. 3. Press Ctrl-T/ Cmd-T to open the Quick Tag Editor.
Adobe Creative Team (2013-07-08). Adobe Dreamweaver CC Classroom in a Book (Kindle Locations 2609-2620). Pearson Education. Kindle Edition.

Sharepoint FBA web application error: Server Error in '/' Application. when login to the web application

Hello Team,
I have configured FBA in SharePoint 2010. After the FBA i can get the SQL users using people picker and added users as a site collection admin.
When i tried to access the site, it shows login page and i have given user name and password then pressed signin button, it's try to redirect the another page and showing below error,
Server Error in '/' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed.
Details: To enable the details of this specific error message to be viewable on the local server machine, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application.
This <customErrors> tag should then have its "mode" attribute set to "RemoteOnly". To enable the details to be viewable on remote machines, please set "mode" to "Off".

<configuration>
<system.web>
<customErrors mode="RemoteOnly"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="On" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
"An exception occurred when trying to issue security token: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported
method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.19 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'..
I checked sharepoint logs and didn't see any log. but i can see below error logged in Event viewer application logs,
I tried changing all customErrors mode and still same error.
Kindly help me on this, how to resolve the issue.
Thanks in advance.
JP

Hi,
According to your description, my understanding is that the error occurred when you accessed SharePoint site through form based authentication.
How did you configure the form based authentication?
Here is a link about the steps required to configure FBA in SharePoint 2010 for your reference, and check the steps to see if there anything wrong in your configuration:
http://www.codeproject.com/Articles/352841/How-to-Configure-Form-Based-Authentication-FBA-in
Through the common error message, we cannot find what exactly caused the error.
Here is a similar thread for you to take a look:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the?forum=sharepointgeneralprevious
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Application error while using security.policy feature

I am learning Java by reading http://java.sun.com/docs/books/tutorial/
While studying the "Security/Quick Tour of Controlling Applications" part I compile GetProps.java example:
import java.lang.*;
import java.security.*;
class GetProps {
public static void main(String[] args) {
String s;
try {
System.out.println("About to get os.name property value");
s = System.getProperty("os.name", "not specified");
System.out.println(" The name of your operating system is: " + s);
System.out.println("About to get java.version property value");
s = System.getProperty("java.version", "not specified");
System.out.println(" The version of the JVM you are running is: " + s);
System.out.println("About to get user.home property value");
s = System.getProperty("user.home", "not specified");
System.out.println(" Your user home directory is: " + s);
System.out.println("About to get java.home property value");
s = System.getProperty("java.home", "not specified");
System.out.println(" Your JRE installation directory is: " + s);
} catch (Exception e) {
System.err.println("Caught exception " + e.toString());
When I run it without security manger it prints all the property as it has to:
E:\Test>java -jar GetProps.jar
About to get os.name property value
The name of your operating system is: Windows XP
About to get java.version property value
The version of the JVM you are running is: 1.6.0_03
About to get user.home property value
Your user home directory is: C:\Documents and Settings\mikhail
About to get java.home property value
Your JRE installation directory is: C:\Program Files\Java\jdk1.6.0_03\jre
When I run it with security manager it prints the first two properties only and throws AccessControlException on user.home property as it has to either:
E:\Test>java -Djava.security.manager -jar GetProps.jar
About to get os.name property value
The name of your operating system is: Windows XP
About to get java.version property value
The version of the JVM you are running is: 1.6.0_03
About to get user.home property value
Caught exception java.security.AccessControlException: access denied (java.util.PropertyPermission user.home read)
But when I run it with security manager and security policy allowing access to user.home and java.home properties it nevertheless throws AccessControlException, in spite of that mypolicy file grants access to these properties:
E:\Test>java -Djava.security.manager -Djava.security.policy=mypolicy -jar GetProps.jar
About to get os.name property value
The name of your operating system is: Windows XP
About to get java.version property value
The version of the JVM you are running is: 1.6.0_03
About to get user.home property value
Caught exception java.security.AccessControlException: access denied (java.util.PropertyPermission user.home read)
Here is content of mypolicy file which I created by using policytool utility:
grant codeBase "file:/E:/Test/" {
permission java.util.PropertyPermission "java.home", "read";
permission java.util.PropertyPermission "user.home", "read";
My system:
MS WindowsXP Professional, Servis Pack 2
Sun SE JDK 1.6.0_03
What am I doing wrong?
Thank you, Mikhail.

The last two days have been frustrating. The error above also appeared when I was trying to view one of the relationships in one of my entities.
What seems to have been happening is Designer showed a relationship existing after it had been deleted. This seems to be a bug in Designer. These rouge links can be deleted in the RON (although if you try to look at their details the RON will crash with the error in original query). After this cleanup everything worked like clockwork.
Hannah Fraser

Using LabVIEW 6.0.1 in Win2K, I get the Application Error: The instruction at "0x004be060" referenced memory at "0x00000001". The memory could not be "read".

I have several VIs that use the same typedef. This "super" typedef consists of of a cluster containing 6 arrays. Each array has elements that are themselves typedefs. The array element typedefs consist of a cluster of strings, a string array, and yet another cluster typedef of instrument handles. The total number of unique typedefs is 13 (1 super, 1 as the array element in the 6 arrays, and 1 in each array element).
When I make any changes to any of these typedefs and I try to open a VI that uses the "super" typedef, LabVIEW stops loading subVIs and crashes with the Application Error: Application Error: The inst
ruction at "0x004be060" referenced memory at "0x00000001". The memory could not be "read". Also note that this VI contains several subVIs that use this "super" typedef for terminal inputs and outputs.
What is causing this problem? My only solution to this is to rename the "super" typedef, open the VI, ignoring the load of the "super" typedef, and once the VI opens (with a broken arrow) relinking the VI to the typdef after renaming the typedef back to the original name. This becomes quite painful when you have to do this for each and every VI that uses this typedef on every revision of the typedef.

You might want to first install the 6.0.2 patch before digging too far into this. You can download it from the ftp site:
ftp://ftp.ni.com/support/labview/windows/updates/6.0.2/
If the problem remains, then it is likely related to a few known issues with strict type defs. Unfortunately, there is not much that can be done about it at the present time. You might try having the *.ctl file open in the editor when you open the VIs to see if that helps.

Why do I get the Application Error jqsnotify.exe-Application Error. The memory could not be read?

Why do I get this error message every time i opened up Firefox saying: jqsnotify.exe-Application Error and then at the bottom line it says: The instruction at "0x5ff3d322"referenced memory at " 0xe41203c3". The memory could not be "read". Click on OK to terminate the program.
== This happened ==
Every time Firefox opened
== I recently renewed and installed the CA Security Suite and un-installed Firefox and re-installed it again.

System restore did it for me........!!!! It's gone and I don't miss it one bit.....!!!! May be one of those untraceable tricks that hackers use to irritate people.....Some security programs can identify these things ,but the perps usually use bogus addresses to send them anyway...Cyber criminals SUCK....That is right ,I said that.... and they should be jailed and fined and suspended from internet usage all over the globe....
Reverend K.
CEO,FOUNDER,Site Editor,
http://WWW.CCCINTL.NET

Why on close am I geting " firefox.exe -Application error - The memory could not be "written" "?

Why on close am I geting " firefox.exe -Application error "The instruction at "0x00000000" reference menory at "0x00000000". The memory could not be "written" Click OK to terminate."?
This is on Window XP
A program White Smoke was loaded into this unit about 3 month ago and a popup to buy started appearing 1 week ago. I unistalled the program and i found virus that was removed.
The unit will not allow a system restore also.

You do not need to start Firefox to disable the Java Quick Starter, you can do that via the Java Control Panel (Control Panel > Java > Advanced)
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Photoshop.exe Application Error

Open image in CS4, after a couple of minutes a dialog box opens, Photoshop.exe - Application Error, how to fix please?

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

"iTunesSetup.exe is not a valid 32bit application" error received.

"iTunesSetup.exe is not a valid 32bit application" error received. I'm on dial up (no flames or stupid comments in reference to this please) with Toast using IE9. I've uninstalled, deleted, and restarted my computer after each attempt. I've tried with 32bit and 64bit. I've tried at the local library using their WiFi connection and at home with the dial up. I've tried running program and saving before running both download types. This has been 3 days of work since the 24th all so my son can try and use his iPod Touch. Is there no way of accessing iTunes with the iPod Touch without having it installed on the computer? I'm sick of this and so disgusted with Apple right now. I'm sorry that I'm on dial up, but out where I live, everyone is because there is no reception for phones or satelite. And even coming to town to use the quicker internet here, it still was a 6hour plus download time. And right when I click 'Run', it gives me this error message each time.
My son and my whole family and neighborhood after I've asked everyone's help with this problem has become fed up with Apple cause there is no disc they can mail me to get iTunes onto my computer and no one else we've asked can download it either. One person has the program but its iTunes 7 and they can't upgrade because of dial up. His iPod Touch will not even go to any other screen but the one that shows the plug and iTunes icon on it. I would really appreciate some kind of help from someone cause we are all sick of this, my son is not happy, and this was supposed to be a Christmas present that he could use. I can not even remotely begin to....well, I could fill this page with gripes but I would just really appreciate a knowledgeable answer that I can use to quickly fix this for my son's Christmas. Please help.

Karen, this is far off-topic in a sense. But I have a sister in the wilds of central MI. No access to cable no way. And limited 3G minutes.
She finally opted for MiFi and can get much faster online access. She is able to download to her iTouch, iPad and Mac laptop (3 y.o.) much faster than her old dialup.
It's worth checking if it might help. Hers is Verizon (http://www.verizonwireless.com/b2c/mobilebroadband/?page=products_mifi)
AT&T also has MiFi (http://www.wireless.att.com/businesscenter/devices/att-mobile-hotspot-mifi-2372. jsp).
There may be others as well.
I am spoiled w/ cable but it's been great for her. If this is out of line or you've explored it to no avail please ignore.
Best wishes and hope these bumps get smoothed out. Hope you have a good New Year and your son's iTouch problems get worked out.

Disabling "Application Error" to restart using restart button in sxmb_moni

Hi Experts,
I have a scenario of JDBC to inbound Proxy.In this we have created Fault message type to capture any error.The requirement is to disable the option of Restart in SXMB_MONI for application error generated with Fault message.We have done coding for generating application error in inbound proxy code.Looking for a quick reply.
I am looking for disabling the "Application Error" generated from Fault message of inbound proxy to "Resart" using Resart button in SXMB_moni of Application system ECC.what I am referring to is how to disable u201Crestartu201D (not resend) of the messages in SXMB_MONI if they have errors.
For example, the interface to load some entries calls a proxy which may load some messages successfully and some may result
in errors. This would appear in the SXMB_MONI with application errors with restart capability. If the user restarts the message it will post the entries again which were successfully posted earlier. We would like to prevent this from happening.
I have gone through the below links.But no luck.Please suggest me if anyone know the solution/hint for this.
Proxy framework: Catch CX_AI_SYSTEM_FAULT
Re: SXMB_MONI - Message Status - Automatic Restart
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically

I do not think you could do that as Asyn messages are always restartable. May be you should look at changing the proxy code so that it does not through application errors but instead would update a Ztable with list of items need to be reprocessed. And this can be sent to the JDBC system as reprocess request.
VJ

A sample web service to return SOAP fault message for application error

Hi,
I need to test behavior of XI, in case of application error (using <detail> tag in soap:fault) from web service in nosoap mode.
If any one is aware of a free web service, which can raise application soap fault message, Kindly provide the details.
Thanks in Advance,
Rahul..

Hi,
What is the URL to which you are posting the SOAP message?
Is it?
http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet? channel=<party>:<service>:<channel>
If yes, then like mentioned the QOS is picked from the Sender SOAP adapter.
But, if the URL is ,
http://<server>:<ABAP-port>/sap/xi/engine?type=entry&version=3.0&Sender.Service=<YourService>&Interface=<YourNamespace>%5E<YourInterface>
Then you need to give the QOS as ,&QualityOfService=ExactlyOnce appended to the above URL.
More, /people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
Regards
Bhavesh

How to read the DB application error in JSP

We have the PL/SQL triggers that perform validations on the insert and update. If validation fails the RAISE APPLICATION ERROR is used.
On error the errorpage.jsp is called correctly, but my problem is that I can not read the actual error message from database.
All I am getting from exception.getMessage() is the JBO message. The exception.printStackTrace() does not help either. How can I read text of PL/SQL exception message ?
I have tried this test in errorpage:
if( exception instanceof oracle.jbo.JboException ) { ...}
but apparently the exception is not JboException, since test fails.
I read about ApplicationModule.setExceptionHandler() and even build exception handler which does not do anything. I assumed that this would allow all exceptions to be passed to the error page. Nothing like that happens though. I still see only last JBO exception, I can not see the original DB exception.
Thanks in advance,
Michael

Hi ankur,
thanks for the quick reply,
I have got the answer for the first question.
Can u tell me solution for the 2nd question also. how to read the Portal user information in VC. like reading the Portal user information in webdynpro.
In webdynpro we can read any of the portal user properties or information like using the following code.
Itry{
IWDClientUser user = WDClientUser.getCurrentUser();
String fName = user.getFirstName();
String lName = user.getLastName();
}catch(Exception e){
In the same way to read the portal user information in VC. BCz for every portal user we have created one custom properties, we need to read that propety value in my vc application, when the user logged in to portal and accessing integrated VC application.
I have seen one of the thead this is possible from VC7.0 of NW2004s, current my version is also the same.
Portal 7.0
VC 7.0
If u know how to do that, can u let me know.
Regards
Vijay

Cannot find "quick sound editor" in media manager

I have tried everything I can do to find the "quick sound editor" that is supposed to be packaged in the media manager software that was supplied with my at&t blackberry curve.
can you help... where is it...
Solved!
Go to Solution.

Hi and welcome to the forums!
It doesn't exist in the Blackberry version:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB12801&sliceId=SAL_Pub...
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Application error occurred during request processing.

Hi, I got the following error when you invoke a method of a web service deployed on my local server
Details:com.sap.engine.services.webservices.wsnavigator.WSNavigatorException: null
Exception id:
I don´t have any compilation errors in the Java source code published by the Web service.

Hi Sumit,
thanks for the quick reply. I get only these lines when i execute webservice.
500 Internal Server Error
Application error occurred during request processing
 Details: com.sap.engine.services.webservices.wsnavigator.WSNavigatorException: null
 Exception id: [0016355ABDF800580000016F00002C7800043D23C1985713]
If required i can send my code...
thanks,
sudhir.

User Tracking - Application error: URN_NOT_FOUND

hello
running ciscoworks 3.2 on Windows 2008 SP2 - installed apps are:
1. Campus Manager 5.2.1
2. CiscoView 6.1.9
3. CiscoWorks Assistant 1.2.0
4. CiscoWorks Common Services 3.3.0
5. Device Fault Manager 3.2.0
6. Integration Utility 1.9.0
7. Internetwork Performance Monitor 4.2.0
8. LMS Portal 1.2.0
9. Resource Manager Essentials 4.3.1
When I run a quick report in Campus Manager (User Tracking > Reports) I get the following error appearing in a window:
Application error: URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!.
Acquisition is working fine – on completion it states how many new hosts have been discovered but I get the above error when I try running a report.
Reloaded server but problem persists. I’ve attached the output of pdshow and the cmapps log - any advice/guidance appreciated.
Thanks
Andy

Hello,
I have the same problem.
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Tabla normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
LMS2.6
could anybody help me?
I attach the ctm_config.txt file.
Thanks

Quick Tag Editor Dropdown Application Error

Similar Messages

Maybe you are looking for