Quick time 7.5.6 is a bug !

Quick Time 7.5.6 does not fix anything but is a big bug !
Opening more than two screens H264 at the same time on a laptop Intel 2.16 and running, then everything freeze or the soft quit!
Very strange, one day before with the version 7.5.5 everything worked perfectly !!!
In addition, impossible to contact someone on the Apple's website and impossible to re install 7.5.5 !!!
Is it a big joke ?

To Apple Discussions.
All "bug" reports regarding QT should be submitted to QuickTime Feedback.
Apple's message boards are not the place to report the "bugs."
Thank you.

Similar Messages

How do I uninstall firefox 4 and use the previous version. I do lots of work related tasks that require quick time to work and it doesn't with ff4.o.

Quick time crashes and I have lost almost all sounds/video sound capability with the new ff4.0. I want to remove it and replace it with the previous version until the bugs are fixed.

Maybe wait another day because Firefox 5.0 will be released on June 21 and maybe that version works better.
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
Make sure that you allow the plugin-container process in the firewall and other security software.
See also:
* [[No sound in Firefox]]
* [[Video or audio does not play]]
You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
You will only see the Firefox program in the Mixer if you are on a website that plays sound.<br />
Also check the volume setting for the plugin-container process.<br />

Quick Time Player Confusion!

I am confused.
In SL, every time I right click a movie file, whatever the format, and select "open with" I get a drop down menu headed:
Quick Time Player Launcher (default).
What is this?
Below this are listed the other players I have installed (VLC, DivX, RealPlayer, iTunes) INCLUDING Quick Time Player 10.
Is Quick Time Player 10 different from Quick time Player Launcher? It has a different icon in the drop-down list, Quick Time Player 10 Launcher has the default icon. Quick Time Player 10 has an icon I chose for it to assist in my distinguishing between the two (or is it one?) application/s.
In my applications folder there is Quick Time Player 10, but no Quick Time Player Launcher.
And when I select Quick Time Player Launcher from said drop-down list..... Quick Time Player 10 launches!
But, and here's the really confusing part, ALL the movie players I have installed are listed in that drop-down list EXCEPT Quick Time Player 7.
Now, call me old-fashioned, but I prefer Quick Time Player 7.
However, if I want to open a movie using Quick Time Player 7 I have to go to the bottom of the drop-down list, select Other, and navigate through my Applications to reach it.
How do I add Quick Time Player 7 to my drop-down list?
Better still, how do I make Quick Time Player 7 my default movie player?
Cheers,
Martin

QT player launcher is an application helper sitting inside QT player 7 which launches QT player 10. you should not see it in the open with menu. it's a known bug that you do see it. but it should not affect the functionality. if it does then reset your launch services database. delete the file homedirectory/library/preferences/com.apple.launchservices.plist and run the following terminal command
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
note that this will reset all default programs set to open various file types to the defaults so you might have to change some afterward.

Unable to play my quick time files to other computers....

Dear folks,
I post again my problem. I have a quick time movie which I upload to a digital performer(music software)file, I write music based on the picture and then I bounce to quick time movie.
The new bounced file on my desktop is playing fine (by the way I have quick time 7.5.5. pro). I transfer it to my memory stick (travel drive) and I am trying to play the file to other computers but I get only sound, not video.
So my question is how come only audio is playing and not the video.
I am sure my codec is set to H.264 which is the most standard codec, right?
Please advise what to do.
P.S. I exported the bounced file as avi (using "file" and "export" from quick time menu and I was able to play it to other computers. The quality though is not as good as quick time movie.

I have the same problem: HD movie exported from Final Cut Pro as av QT movie will play beautifully on in the QT player on the dual Mac Pro it was created on, but when trying to play it on my flatscreen TV from a Mac mini, I get sound, but just a black screen.
Format is Apple HD 1080i/50, 1440 x 1080 (1888 x 1062) (no idea where these formats come from) FPS 25, nomal size and current size is 1920 x 1080. I have QT pro 7.5.5. and mpeg-2 plug-in on both macs.
I have also tried the h.264 codec with same result. MPEG-4 codec will show video with staccato perfomance and stops, even though it plays evenly on the Mac Pro. My .movs in ordinary 4:3 plays ok, so may be it’s a HD format problem?
Juging from other postings, there is a bug in the later QT versions, but why then is it fine on one mac and not others, with same version of QT. TV has nothing to do with it, because it plays quirky on other Mac minis also.
Someone from Apple should comment on all these problems.

Uninstalling Quick Time 7.3.1

I purchased Quick Time Pro the other day because I was watching a streaming video and when I ctrl-clicked it, the menu said I could save it to disk if I upgraded. Not only could I NOT save it to disk when I purchased Quicktime Pro (the menu item was no longer available) but now I can't open my Flash-based .mov files in either Quicktime, VLC or Real Player.
This is a major problem for me. Is there a way to go back to the earlier version of Quicktime Player?

Seems I got bit by the Mac bug even worse! Bunches of my apps won't open...address book, MacMail, even Disk Repair or Console. Been running current OSX on this wonderful workhorse G3 since Steve was in his garage...narry a problem.
Now, oddly, the apps seems to start...even appear in the dock with the triangle, and show up in ForceQuit as if all is normal. Only prob. is the app is NOT there
The second I do the restart after installing 7.3.1 Quack Time, I got nuttin but trouble. Funny, iTunes and even QuickTime player work ok. So you know what that means? If I call support and pay the bucks, they'll tell me it's phases of the moon or Bill Gates, but it "certainly can't be QuickTime." I just KNEW they'd do something someday to make me have to spring for a Mac Pro...I just didn't think an update would sneak in my back door and zap me.
Anybody else having these problems after the update...or do I just let them beat me up and tell me it's something I did???

Quick time player doesnt start any more since kernel shock and update, the symbol looks different, reinstallation doesn´t work

hi there.
I am using a Macbook Pro with snow leopard and this is my problem:
I was having a Kernel Shock 2 weeks ago. After that, my Finder-Dashboard hasn´t work any more. I´ve did the latest update. Now Dashboard Works but Quick Time Player doesns´t do.
I Can´t find NOWHERE in the internet an installation file for Quick time player to reinstall. And I can´t find my Installation DVD.
quicktime has changed his symbol to an white picture with pensil and brush.
I have made a second Account and activeted the guest accounts and tryed there, but Quick time player isn´t here working to.
its really sad that this program doesn´t run any more.
It blinks 2 times in the dock and shut down immediately.
Can someone please help me? is my only opinion finding the Disc?

I've tested that on an iPad 1 and it seems problem is performance related. On this device a simple click to a google search result link doesn't work properly. You hit the target multiple times and sporadically it opens. You still see the focus on the object and it's activation but no event triggering happens.
All others functions are working well, only Webapps and Webpages suffer from this issue.
The owner of the device has not recognized that issue and believed it is a "feature" not a bug as he do not has much experience with Apple devices. But this confirms it is on every device and not my own personal one or dedicated to our office. The only workaround is to use other devices or touching links with different speed/pressure. It works better if you hit the objects very quick lifting the finger immediately.

Quick Time PRO registration troubles

I just got a Quick Time PRO for Windows licence and when I try to register the QT version 7.1.5 using the information given to me by the eletronic purchases personnel it just does not work. Is there anyone that can help with this situation?
Lemos

I just got a Quick Time PRO for Windows licence
and
when I try to register the QT version 7.1.5 using
the
information given to me by the eletronic purchases
personnel it just does not work. Is there anyone
that
can help with this situation?
Lemos
I am having the identical problem. I have
gone through the procedure several times and checked
my version to no avail. Any suggestions?
HELP!
DELL
Windows 2000 Part Number D3381ZIA -
Apple
If anyone knows how to correct this bug of Quick time PRO instalation routine please let us know about.
Regards
Lemos

Quick time Player has encountered a problem and needs to close

Hello,
I am getting this message and it is driving me bonkers!
"quick time Player has encountered a problem and needs to close. We are sorry for the inconvenience".
Am running XP. Have uninstalled all Apple programs (QT, iTunes, update, bonjour, etc and in the order Apple recommends.) I re-installed QuickTime again.
Same Problem.
Went to the control panel and launched the quicktime control panel.
QuickTime Preferences comes up. If i choose the "files type" tab this error comes up in a window:
RUNDLL
An exception occurred while trying to run "C:\WINDOWS\system32\shell32.dll,Control_RunDLL "C:\Program Files\QuickTime\QTSystem\QuickTime.cpl",QuickTime"
Clicking on this just closes the window.
Some one on another post mentioned something about another codex takinhg the place of an original. How do I find if this is causing it if only to shut down that avenue of conceren?
This has taken up SOOO much time I can't tell you and I can't use my iPhone or iTouch until I get it sorted.
Any help would be much appreciated.
Craigeed
Message was edited by: craigeed
Message was edited by: craigeed

QuickTime Preferences comes up. If i choose the "files type" tab this error comes up in a window:
RUNDLL
An exception occurred while trying to run "C:\WINDOWS\system32\shell32.dll,Control_RunDLL "C:\Program >Files\QuickTime\QTSystem\QuickTime.cpl",QuickTime"
Some one on another post mentioned something about another codex takinhg the place of an original. How do I find if this is causing it if only to shut down that avenue of conceren?
Good work, craigeed. That's enough information (of precisely the right type) to suggest that you don't have a codec pack issue. If you had a codec pack problem, usually you'd get a rundll error if you just tried to open the control panel (and you're getting further in than that). Also, the rundll error for a codec pack problem would indicate that your QuickTime.cpl is lurking in the wrong place (down in the \system32\ directory). Your message is showing that your QuickTime.cpl is in precisely the correct location.
So we'd better start checking on some other possibilities.
The "QuickTime has encountered an error" message is pretty generic, but on at least some versions of QuickTime 7.x it has suggested malware problems. So we'd better try getting that off the table.
Download fresh definitions and run vigorous virus and antispyware scans. If your security software providers offer them, try backing that up with an online virus scan. (That can sometimes pick up an infection even if the security software on the PC has been compromised.)
Do the scans show up any problems? If so, does fixing them help with the QuickTime error?

My speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

my speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

Thanks for your solution, it wasn't quite what solved the problem but i remembered that i had a bit of salt water on my phone recently and spraying the charging port with an anti-oxide spray solved my problem, do you mind if i ask, how is the charging port related with the volume or/and speakers?

I just bought a new MacBook Pro Quick Time 7 icon but how do I get it to work? Do I need to purchase an additional update?

I just bought a new mac book pro. It has Quick time 7 icon on it but how do I make it work? I am a student and have a quick time video I need to play but the video won't play. Do I need to purchase an update on Apple?

It has a question mark inside the quick time logo everytime I click on it
If you mean you are trying to play a file and the QT icon with a quesion mark appears in the display area, then this means the play has reached a programming disjunction and doesn know what to do—i.e., the player recognizes the content but something is preventing proper playback is telling the user it has a question as to how the content is to be played. In such cases you normally have to determine what content, what file container, and which player version is involved before you can decide how to best fix the problem.

JAN 4, 2012 As of the Upgrade to   Lion,. and the Email portion, ..   DOES NOT allow a Video Clip to be sent via the Email as the I-Photo is not supported by Video Clips ( Previous Leopard No problem clip and drag via Quick Time Pro to the email

JAN 4, 2012
As of the Upgrade to   Lion,.   2007 I-Mac -   the Email portion, ..   DOES NOT    allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip ..      Now Lion only Export's   1 size, .   only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail    ???
Between the   Issue of   the   Lion, and Email issues ,   and the   Upgrade of   I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge ..    70,000 + photos in the Computer. .   and was   40,000 in the   I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB   or 32 GB   Unit . .
          No Help . ..   so far, .. as a Apple user   since   1996 ..    I have Never experieanced such frustration    ???
               ( any one have some help if similar experiances    ?     thank you     )

JAN 4, 2012
As of the Upgrade to   Lion,.   2007 I-Mac -   the Email portion, ..   DOES NOT    allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip ..      Now Lion only Export's   1 size, .   only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail    ???
Between the   Issue of   the   Lion, and Email issues ,   and the   Upgrade of   I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge ..    70,000 + photos in the Computer. .   and was   40,000 in the   I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB   or 32 GB   Unit . .
          No Help . ..   so far, .. as a Apple user   since   1996 ..    I have Never experieanced such frustration    ???
               ( any one have some help if similar experiances    ?     thank you     )

Not able to watch .mp4 videos in Quick Time Player

Hi,
I have a GOPro camera where the videos are currently stored on an external hard drive. I wanted to import those videos to iPhoto, which didn't work. Then I tried importing them without using iPhoto, but when trying to watch them I get a message saying that "Quick Time Player is not able to open the video.
I find this very strange, as I already have some GoPro videos in IPhoto, which I can view just fine (in iPhoto, and outside of iPhoto). The videos are shot using the same camera.
Also; Quick Time Player is supposed to support mp4. format; so I really don't see where I did go wrong?

What format is used on the external drive?
I suspect it's the reason the files can't be played.

How to open videos in Quick Time Player form my website

Hi guys and girls,
I hope everyone is good. I was surching this forums for a while trying to find the answer. I didn't find a complete so I thought I'd post a question and hope someone could give me a complete step-by-step guide.
Here is what I'm trying to do.
Here is my site (one of them)
http://web.mac.com/yuriyork/iWeb/720Neighbourhoodcircle/Welcome.html
if you go to video page you will see a QT movie loads and if you click play it starts to play. What I want is to make it play movie automatically once the page is open. I'd like to make this page the same way apple has done their video adds here http://www.apple.com/iphone/ads/ad2/ You have a button for small, medium large and HD formates and they all open in the same window. How did they do it?
Also, how can I make a movie open in new quick time player window outside of the safari browser.
Thank you in advance for all of your help with this.
Sincerely,
Yuri

do you know HTML? if you really do not know some important basics, then i suggest you forget this!
secondly, if you want to offer people a small, medium ,etc., version of your movie, that is gonna take up lots of space! you might just offer one version. 90% of the people watch only the large version.
if you do want to really really integrate this - then i guess you will have to use frames - or some kind of script (someone correct me if im wrong).
max

Problem with quick time player or is it normal ?

Hello, I want to know why, since the transition to OS X Mavericks I need to convert all videos to AVI format instead of being able to look directly as before with OS X Mountain Lion I converted the Quick Time MOV format which takes up much more space on the HDD I have another drive where I can read directly, but I want to know why I need to convert with QuickTime
Thanks

I want to know why, since the transition to OS X Mavericks I need to convert all videos to AVI format instead of being able to look directly as before with OS X Mountain Lion I converted the Quick Time MOV format which takes up much more space on the HDD I have another drive where I can read directly, but I want to know why I need to convert with QuickTime
To answer your topic title question, if QT X v10.3 is converting your files to AVI, then that would not be normal. In most cases it is the other way around. That is, QT X v10.3 converts most forms of AVI content to QT compatible compression formats in MOV file containers. While QT X v10.3 still recognizes the AVI container, on a few compression formats (like Motion JPEG video and various PCM formats) will play natively without conversion under the Mavericks' AV Foundation.
Basically, QT X under mavericks looks at the file container and the codecs it contains and, if the AV Foundation recognizes them but does not consider the combination compatible, begins an automatic conversion depending on programming specifics. In some cases only the audio or video data will trigger the conversion process and be conveerted and merely "pass through" another compression format while in other files both the audio and the video will both be converted. Unfortunately, even some of the codecs normally native to the Mac OS are also no longer supported. For instance, Mavericks now includes an Apple ProRes 422 codec component which appears to have replaced the Apple Intermediat Codec as the default "incermediate" compression format fore file editing. Mavericks also does not seem to support the Animation, PNG, or DV stream video codecs any longer.
If you don't like the way QT X v10.3 works, you have two basic options. The first to to use a different media player (e.g., QT 7, VLC, MPlayerX, MPEG Streamclip, etc.) to view your content or you can opt to manually convert your content to a compression format and container that remains QT X player compatible under Mavericks.

I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!

I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!

you launch QT then go to its REGISTRATION

Quick time 7.5.6 is a bug !

Similar Messages

Maybe you are looking for