Quick Time (Audio Preferences) fails to launch with buffer overrun error

It all started a few weeks ago, after installing itunes7.0 for windows, and itunes began to annoy me (indeed drive me mad) with an error message :
"an unhandled win32 exception has occured in itunes.exe [3840]" at startup / closing immediately afterwards.
After numerous uninstall/reinstall/clean the registry/system restore attempts I managed to solve the issue-- BUT only for a few days..It failed again and so I went through the itunes support forums even found an entry
"iTunes 7 for Windows: iTunes fails to launch with an unknown error"
which suggests that my issue could be solved by :
"Open the QuickTime control panel and select the Audio tab.
In the Devices section de-select the Safe mode (waveOut only) option and click Apply."
But to my surprise, when i selected the Audio tab (and the Audio tab ONLY ) it presented me a "buffer overrun error" which indicated that the internal state of the program has been corrupt and it would be shutting down now..
It's such a nuisance..!!
Please, help, and your help will be deeply appreciated... !
I have tried to revert to the older version and it didn't work..

let's try swapping out your existing QuickTime one more time. we'll take a few additional explicit precautions this time.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Similar Messages

EBS fails to launch with afpoload error

Hi,
All on a sudden our EBS refuses to launch, with the following error message. We are on 12.0.6 version, and haven't done any changes lately. As this is a production instance, we shall be raising an SR tomorrow when we get to work, but just thought of posting it here - just in case any of you have been there earlier. Any quick ideas will be highly appreciated.
APP-FND-01564 ORACLE error 942 in afpoload
Cause: afpoload failed due to ORA-00942: table or view does not exist.
The SQL statement being executed at the time of the error was: select NODE_ID from FND_NODES where SERVER_ID = :asid and was executed from the file &ERRFILE.
Regards

Hi,
Any changes have been done recently?
select NODE_ID from FND_NODES where SERVER_ID = :asid and was executed from the file &ERRFILECan you find FND_NODES table in the database?
Have you tried to run AutoConfig on the database/application tier node and see if it helps.
Please check the application.log file for details about the error. If no errors found in the logs and the above did not help, then please obtain the FRD file and post the complete error message here.
Thanks,
Hussein

Java preferences fails to launch

I can no longer run JavaPreferences, it fails to launch with the message
"A static initializer of the main class threw an exception: java.lang.NullPointerException..
a while ago
StergUK gave this anwer, :
OK, after panicking a bit I have found the solution to this.
Go to /System/Library/Frameworks/JavaVM.framework/Versions/ and delete 1.6.0 folder and 1.6.
Then download this file:
http://www.cs.washington.edu/homes/isdal/snowleopardworkaround/java.1.5.0-leopard.tar.gz
Decompress the file and you should have a folder named 1.5.0.
Copy that folder to the /System/Library/Frameworks/JavaVM.framework/Versions/ replacing the old one. A window will pop up for version authentication. Click "Authenticate" and replace the old folder with the one from the java.1.5.0-leopard.tar.gz.
Run Java Preferences from Utilities and you are good to go.
I have tried, but I still cannot run Java preference and get the same answer : "A static initializer of the main class threw an exception: java.lang.NullPointerException..
can anyone help?

Did you try deleting the .plist file yet?
Go to ~/Library/Preferences
Move the com.apple.java.JavaPreferences.plist from the Preferences folder to the Trash.
Restart your Mac.
See if you can open Java Prefs.

Error event id 2 - Kernel Event Tracing - Session "" failed to start with the following error: 0xC000000D

I keep getting this strange error logged as Error event id 2. Note session string is blank "". Any ideas?
Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
Source:        Microsoft-Windows-Kernel-EventTracing
Date:          24/12/2009 09:08:20
Event ID:      2
Task Category: Session
Level:         Error
Keywords:      Session
User:          SYSTEM
Computer:      George-XXL
Description:
Session "" failed to start with the following error: 0xC000000D
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
    <EventID>2</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>2</Task>
    <Opcode>12</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime="2009-12-24T09:08:20.835299100Z" />
    <EventRecordID>36</EventRecordID>
    <Correlation />
    <Execution ProcessID="1944" ThreadID="1948" />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>George-XXL</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="SessionName">
    </Data>
    <Data Name="FileName">
    </Data>
    <Data Name="ErrorCode">3221225485</Data>
    <Data Name="LoggingMode">5</Data>
</EventData>
</Event>

Can you let us know if you get any Blue Screen crush error while using your comptuer?
Generally we can safely ignore the errors in the Event log. Aas we don't if you have get other issues in your computer, you can test your computer in the Clean Boot mode. This method will help us determine if this issue is caused by a loading program or service.
You can try the the following steps:
1. Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
Please test this issue in this Clean Boot environment, if the issue disappears in the Clean Boot environment, you can use the dichtomy to quickly narrow down which entry is causing the issue. You can refer to the
KB929135.
Good luck!
John
This is a very poor answer. This guy doesn't know what he's talking about because if you tell someone its ok to "safely ignore the errors in the event log" as a blanket instruction ESPECIALLY because as he stated so himself
he didn't know if there were other issues with the OP's pc then he's giving really bad advice. If you ignore errors in the event log then over time your system will degrade and you will have other issues.. Every error on your pc should NOT be ignored.
It should be decided on a case by case situation.
Furthermore this is an error involving the Windows Session which it states has failed. Definitely should NOT be ignored.
I've got the same error which has suddenly just showed up. No BSOD, Do not have WHS installed and all my media center connectors have NEVER been connected. I don't believe this is a service issue. I think it has something
to do with kernel event tracing.
Of course, it's just my opinion....I could be wrong!

IP Helper Service causes Session "" failed to start with the following error: 0xC000000D

I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session "" failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session "" failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
Does anyone know how to fix this issue? I know I could disable the service but I prefer not to do it.
Thanks
Alberto

Hi,
IP Helper (service name 'iphlpsvc') is apparently designed to improve a Windows PC's support for IPv6 network protocol.
I suggest you try enable the dump collection by copying following words into notepad, saving it as dump.reg and importing it:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\localdumps\iphelper.exe]
"DumpFolder"=hex(2):63,00,3a,00,5c,00,63,00,72,00,61,00,73,00,68,00,64,00,75,\
00,6d,00,70,00,73,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
Once the error appears again, please find the crashdump file under c:\.
Regards,
Kelvin hsu
TechNet Community Support

Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035

I'm getting the following error:
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 5/17/2010 11:04:48 AM
Event ID: 2
Task Category: Session
Level: Error
Keywords: Session
User: ****
Computer: ****
Description:
Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>2</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2010-05-17T18:04:48.898886000Z" />
<EventRecordID>45</EventRecordID>
<Correlation />
<Execution ProcessID="4816" ThreadID="2800" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>****</Computer>
<Security UserID="****" />
</System>
<EventData>
<Data Name="SessionName">WbadminInBuiltTracing</Data>
<Data Name="FileName">
</Data>
<Data Name="ErrorCode">3221225525</Data>
<Data Name="LoggingMode">2</Data>
</EventData>
</Event>
Does anyone know what this is or how to prevent it from
occurring?
I'm running Windows Server 2008 R2.
Thanks much,
James

Not according to my computer - (actually its at least 4 years now) which among so many other errors have haunted me from the day I bought it and took it home. I've spent literally a year of time out of the 5 I've had this laptop which btw is a home computer,
not a small business pc - searching, trying fixes that didn't work, searching more trying fixes that worked only to have the same scenario begin again 2-3 months down the road OR new ones pop up - which starts the process all over again. I'm now getting BSOD's
about once every 2-3 days with no reason in the event viewer.
And I continue to work on all the errors, warnings and critical errors with no results. I just wish Microsoft would fix these issues instead of developing new OS's that not only carry these problems over but add new ones to each new OS. Don't misunderstand
me. I like Windows, in fact I'm one of the very few graphic artists out there that prefer it over a MAC but its quite disheartening to be continually working on these issues to say the least.
Of course, it's just my opinion....I could be wrong!

ITunes 10.4.fails to launch, (mac OS10.58), error 13001

Hi, I'm a newbie to these forums.
My iTunes 10.4.1 fails to launch, (mac OS10.58), error 13001.
Fault appears specific to my user account.I want to fully uninstall every itunes related software component, then re-install.
Where can I find reliable extensive instructions for full uninstall?
My web searches have not located an accurate/extensive support page, but I'm sure such information has been posted before.
Previous uninstall/re-install attempts have failed, I suspect due to overlooked iTunes related files remaining in the system.
Have given up trying to correct the fault many times before, after too many wasted hours.
I have not been able to synch iPhone since some time in 2010, when the error first presented.
Now I need to unlock iPhone to migrate to another network, which requires use of iTunes.
Any expert advice would be appreciated!
maker_au

Hi Folks,
Moving the iTunes app as suggested above did not solve the problem for me. However, a post in another discussion suggested:
first deleting the iTunes.app file from the applications folder
then downloading & reinstalling a fresh copy of iTunes from:
http://www.apple.com/itunes/download/
I tried this suggestion and found that deleting the app & reinstalling a fesh copy did solve the problem on both of my affected systems. (I backed up my iTunes library beforehand to be safe, but my iTunes library was unaffected by the reinstall.)
Hope this works for you. Good luck!

Session "" failed to start with the following error: 0xc0000022

Newly installed Windows 2012 R2 server throws the following event roughly every 3 minutes:
Session "" failed to start with the following error: 0xc0000022
The PID referenced in the event points to WmiPrvSE.exe running as NETWORK SERVICE. Is there something obvious I'm missing because I'm not sure where to go with the information I found so far. I already did my fair sharing of Binggling and everything
I find doesn't apply or doesn't fix the problem.

Hi,
Can you let me know the full event log content?
I suggest you restart the Windows Management Instrumentation service.
Niki Han
TechNet Community Support

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035

fresh install and configure on A Dell optiplex3010 running window 7 pro 64 bit running can anyone tell what this is ?
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin Source: Microsoft-Windows-Kernel-EventTracing Date: 4/16/2014 12:04:17 PM Event ID: 2 Task Category: Session Level: Error Keywords: Session User: SYSTEM Computer: HMCServer Description: Session "Circular
Kernel Context Logger" failed to start with the following error: 0xC0000035 Event Xml: <event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"><system><provider guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}"
name="Microsoft-Windows-Kernel-EventTracing"><eventid>2</eventid> <version>0</version> <level>2</level> <task>2</task> <opcode>12</opcode> <keywords>0x8000000000000010</keywords>
<timecreated systemtime="2014-04-16T16:04:17.657816300Z"><eventrecordid>44</eventrecordid> <correlation><execution processid="4" threadid="60"><channel>Microsoft-Windows-Kernel-EventTracing/Admin</channel>
<computer>HMCServer</computer> <security userid="S-1-5-18"></security></execution></correlation></timecreated></provider></system> <eventdata><data name="SessionName">Circular
Kernel Context Logger</data> <data name="FileName"></data> <data name="ErrorCode">3221225525</data> <data name="LoggingMode">268436608</data> </eventdata> </event>

The error is implying there is a naming conflict. This could be 2 or more PCs with the same SID or Computer Name, or two different objects (shares/drives) attempting to use the same drive letter. There is one thing I found of renaming a file that has helped
some people:
http://social.technet.microsoft.com/Forums/windows/en-US/2eab69ac-7537-40c4-916e-6f6d41c05d4b/session-circular-kernel-context-logger-failed-to-start-with-the-following-error-0xc0000035?forum=w7itprogeneral

Session "UpdateUx" failed to start with the following error: 0xC0000022

Running WTP Build 10049 and get the following error, after every boot/reboot :
Error 21/04/15 11:09:39 Kernel-EventTracing 2 Session
Expanding this, by clicking on it, produces the following message :
Session "UpdateUx" failed to start with the following error: 0xC0000022
Any suggestions for a cure.

Hi athol49,
Which account you have used to logon this machine?
This error code is mostly related with the service permission, which indicates that the permission is not configured correctly.
Try to boot into safe mode and check this issue again, make sure there is no 3rd-party software involved.
Next thing is to create another admin account( or enable the built-in admin account to create a new admin account, as this one have permisssion issues), then check this issue again.
Further, run the DISm command to make sure there is no component issue:
DISM /Online
/Cleanup-Image
/RestoreHealth
/source:WIM:X:\sources\Install.wim:1
/LimitAccess
Where the X: is the drive for the install media, or the mounted ISO.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Session "WbadminUIInBuiltTracing" failed to start with the following error: 0xC0000035

Windows Server 2008 R2 Standard.
I open the “Windows Server Backup” node in the Server Manager and see the error message in the system log after that.
Sourece: Kernel-EventTracing
EventID: 2
Session "WbadminUIInBuiltTracing" failed to start with the following error: 0xC0000035
- System
- Provider
[ Name] Microsoft-Windows-Kernel-EventTracing
[ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}
EventID 2
Version 0
Level 2
Task 2
Opcode 12
Keywords 0x8000000000000010
- TimeCreated
[ SystemTime] 2010-12-01T11:17:19.937490400Z
EventRecordID 17
Correlation
- Execution
[ ProcessID] 3472
[ ThreadID] 3100
Channel Microsoft-Windows-Kernel-EventTracing/Admin
Computer LODGER.aqa.com.ru
- Security
[ UserID] S-1-5-21-1644491937-706699826-1417001333-3605
- EventData
SessionName WbadminUIInBuiltTracing
FileName
ErrorCode 3221225525
LoggingMode 2
What causes the error? What do I need to do to avoid it?

I have the same issue on Windows Server 2008 R2 SP1
>will fix it
in future release
What is the next release for my Windows Server? When will it be released?

Issue with running QuickTime Windows. Buffer Overrun Error - C++ Library .

Initial problem was Buffer Overrun Error (C++ Library) when clicking on QuickTime after installation. IE. QT would not even open. http://support.microsoft.com/kb/831875#appliesto
I took these steps:
1. Tried to uninstall QuickTime by itself (it failed).
2.
3. Manually deleted apple, itunes and quicktime from the entire system (where ever it let me).
4.
5. Manually took out from the registration the apple stuff.
6.
7. Left the items in the recycle bin (in case there were any real issues and I needed something restored).
8.
9. Performed a registration cure (RegCure).
10.
11. Took off my entire Anti Virus.
12.
13. Dropped down separately the QuickTime and separately the iTunes on desktop.
14.
15. Tried to install QuickTime from one of the two saved files on my desktop, but encountered a serious fault
16.
17. It needed the QuickTime Installer to remove QuickTime itself, else it crapped out and nothing happened. This complained for a QuickTime.msi file which was a problem.
18.
19. Went to the recycle bin and restored only components which were marked QuickTime Installer.
Removed the QuickTime instead of Repair.
Went to the website and Installed QuickTime 7 directly.
It opened on the desktop after installation.
Installed iTunes separately from the desktop and it opened directly.
Rebooted my pc.
Enabled all my Security (McAFee).
Opened one by one the QuickTime and Then the iTunes.
Created a computer restore point with a narrative for the future.
This was a very difficult task and required a lot of steps. I am glad you helped me with the removing part. Its great to have everything working again on my pc.
I hope this was helpful - it took me ageges to fix.

I'm experiencing exactly the same bug. Matter of fact, it's the first time in years that I've run across this kind of 'problem' when using non-beta software from a major player. Too bad. This really reflects poorly on Apple's credibility.

Quick Time Audio

I have Quick Time Version 7.6.9. I have been given an audio flashdrive to transcribe to text. How is this done? The easiest way?

I have Quick Time Version 7.6.9. I have been given an audio flashdrive to transcribe to text. How is this done? The easiest way?
If you are referring to simply listening to the audio and a transcribing the text to a text editor and do not own a transcription console, then play the file(s) in the QT or other compatible player and type the text into a convenient text editor. (A transcription console usually consists of a tape or tapeless playback console with integrated looping capability normally controlled by a foot operated pedal that allows you to switch between playback and loop modes. These can be very expensive.)
If you are referring to the creation of a QT text display file and have dedicated software for the creation of such files, then use it as the "easiest" way to create your file. If not, then you would have to use QT 7 Pro and do everything manually as follows:
1) Create some dummy text in a text editor like TextEdit and save it as a Plain Text file.
2) Open the TXT file in QT 7 and select the "Export > Yexy to Text" option.
3) Open the "Options" window and ensure the "Show Text, Discriptors, and Time", "Show time relative to the start of: Movie", and "Show fractions of a second as: 1/1000" options are selected.
4) Click "Ok" and save the file replacing the original file. (You may wish to save or duplicate a copy of this file as a starting point for any future text files.)
5) Reopen the QT 7 saved version of the text file in your text editor and modify the default "Font, style, text color, background color, justification, dimensions of text display area, language ID as may be desired for global use.
6) Listen to/note audio text to be entered and then enter display timing for start of text display followed by the text box origin/size and actual text to be displayed (as per the dummy text already in the file).
7) Repeat step 6 for every text entry you wish displayed.
8) When done, enter the display timing entry for the end of the file. (I.e., the final text will display from its start time to the end of the file time.)
Good Luck.

Quick time for windows didn't finish with download

I had itunes in my computer but, by error I remove Quick Time from computer in consecuense I remove itunes too, I tried to download itunes 7, but it is downloading in status: "Initializing quick time types" it is stock in this part, never finish the downloading. What do I have to do?

Get the QuickTime standalone installation. See if you can get that to install properly.
http://www.apple.com/quicktime/download/
Click the button for the one that doesn't have itunes in it.
If you get QT to install OK, then your iTunes install should go OK, also. iTunes uses the QT codecs to play music & video.

Air app install fail in IE with Badge Installer Error # 2032

Much has been written about this problem, and the most quoted solutions are
Ensure the appurl FlashVar is not a relative url but fully qualified http://domain.com/app.air
Uninstall and reinstall Air
Empty browser's cache
None of these have solved my issue and I still have a reproducible bug.
I have set up a badge installer at http://tx.flamjam.com/mms/ which attempts to install appurl=http:/tx.flamjam.com/mms/MMSReview.air
This works beautifully in OS X but fails in Windows with the error window,
Sorry, an error has occurred.
The application could not be installed. Try installing it again. If the problem persists, contact the application author.
Error# 2032
I've tested IE and Chrome, both updated to the most recent versions.
When Air is not installed I get a slightly different error message, with no error number.
The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.
With Air installed, if I instead visit the appurl directly in the browser — http:/tx.flamjam.com/mms/MMSReview.air — the file downloads and installs without problem.
To the best of my knowledge, the error is a generic stream error which essentially means that the appurl could not be found. To demonstrate this, simply use a fictitous appurl and now the same error can be seen on OS X as well. This implies that something is malforming the appurl withing the badge, but I have modified the status display text of the badge to display the appurl parsed from the LoaderInfo object containing FlashVars payload and can confirm that the appurl appears to be consistent between OS X and Win.
Log file in next post.
I'll continue digging for a solution, and post my findings here, but would value other's input on this subject greatly.

An interesting development.
When I monitor my network traffic using ServiceCapture I can see that no attempt is made to connect to the appurl, with the install failing instantly without even attempting to connect to the appurl.
ServiceCapture on OS X confirms the attempt to connect to the appurl even if the url is deliberately fictitous resulting in a 404 response.
The badge begins the installation process using the installApplication method of the following file
http://airdownload.adobe.com/air/browserapi/air.swf
which the badge loads on startup.
It would appear to me that the installation problem is failing inside that loaded swf's code, but I'm at a loss as to how to debug that.

Quick Time (Audio Preferences) fails to launch with buffer overrun error

Similar Messages

Maybe you are looking for