Quick time error #2095 - this will solve it

if you have had problems with opening itunes and have reinstalled again and again and you get the message error....2095. then there is a problem with quick time. and you may be like me and unable to uninstall quicktime for some reason or other.
just leave itunes properly installed and then go to http://www.apple.com/quicktime/download/standalone.html
this lets you download quick without itunes and this should then solve the problem....hopefully

Perfect! That explains everything.
An exception occured while trying to run "C:\WINDOWS\system32\shell32.dll,Control_RunDLL"C:\WINDOWS\system32\Quicktime.c pl,QuickTime
Some program other than QuickTime has stashed old QuickTime componentry down in your \system32\ folder. (Codec packs, some freeware media players, and video/audio file converters are the usual culprits, although some games.) That's what is causing the QuickTime error messages.
Have you installed any codec packs or video conversion utilities or media players on the PC? If so, what's the name and the version number of the package?

Similar Messages

I upgraded to iphone 4. When sync to comp. Comp. asked to upgrade. I did. I tried to open itunes and it failed. Quick Time error 2096. I went through severals procedures. Finally could open itune. Pluged phone in comp it will charge but wont sync

I upgraded t iphone 4. When I sync to computer. I was asked to upgrade itunes, I did. When I tried to open itunes a Quick Time Error 2069 occured. I went through several procudures. Finally I could open itunes. When I pluged in the phone, it would charge but not sync. What now?

update...
I am not one to give up. So I called AT&T today. Now they are telling me they canceled my order because they were unable to fulfill my order. Basically, AT&T told me they sold out so they canceled my order so I can proceed to reorder again. It took them 4 days to realize this. I will be lucky if I get a new phone by Christmas. I am sure they will find a way to cancel my order again.
Again, I argued, how is this my fault. I placed my order at the store around 11 a.m. Pacific time. My friend ordered his phone online sometime after me. He got his but my order was canceled. AT&T tried to explain to me that they sold over 600,000 phones, almost 500 per minute during there peak. Again, I asked, how this was my fault.
I can understand over selling the phone. It is a great product. There is no reason to cancel my order. You adjust my order and tell me you will let me know when my phone will be in. I would have been mad that my phone was going to be late but I would have survived. At least I would be getting one.
At this point, I have no order and AT&T or Apple website will allow me to order one. I just want to get in the QUEUE for one.
Frustrated.

When I try and Share a project, I get a Quick Time Error -50 Any Ideas? Apple Care is scratching thier heads.

When I try and Share (export) a project, I get a Quick Time Error -50 Any Ideas? Apple Care is scratching their heads.

Okay, after several hours on the phone w/ Apple Care includiing nearly 10 hours on Wednesday, we finally figured out why I would get a Quicktime Error -50 when I tried to share a project out of FCP X. The problem was in the music track that I had in the project. I ripped a track from an audio CD, put in my iTunes then imported into the FCP timeline just as Apple says to do.
The problem is; iTunes default rippping codec is AAC. FCPX can't handle AAC compression. I had to re-rip the audio CD to a uncomressed AIFF file, bring that back into my project and then FCPX could share the file and do it's own copression.
This was a new discovery for Apple and FCPX.

I trying to download itunes on my laptop several times but I keep getting a Quick Time error -2096. How do I remove this error?

I trying to download itunes on my laptop several times but I keep getting a Quick Time error -2096. How do I remove this error?

Do you see the problem if you turn off Compatibility Mode for QuickTime?
Right-click on the QuickTimePlayer application (located in C:\Program Files\QuickTime) and choose Properties from the shortcut menu.
In the Properties window, click the Compatibility tab
Deselect all checkboxes currently selected in the Compatibility tab.
Click Apply.
Close the Properties window.
Check out this Apple document -> Error -2096 message when opening QuickTime for Windows in Compatibility Mode

Error message "Share failed quick time error -50" How to fix this problem?

I cannot export to a .mp4 file using compressor without getting an error message "Share failed Quick Time Error -50. How can I get around this problem?

Specifically, how are you exporting to mp4? For example, using the Share menu…and if so, which of the presets?
Russ
Message was edited by: Russ H Re-read the first post.

Quick Time Error message

I asked this question several months ago and got no answer so will try again.
It is weird, but when I try to watch a streaming video on the Apple web site or the Adobe site, I get a message saying that my Quicktime plugin in out of date. I am able to say play this time, but don't know why I am getting this message. I have both 7.6 and 10. What is going on?
Thanks
Judy

when I went to open would not saying there was a quick time error....not sure what to do.
What's the precise text of the error, please? (There's a few different ones I can think of that you might be getting.)

I have AVI files that I need to be MOV files so that I can edit them in Final Cut Pro. I am going to use Quick Time Pro for this....do I have to 'export' it or can I just 'save as', or is there even a difference? Thanks in advance for your help!

I have AVI files that I need to convert to MOV files so that I can edit them in Final Cut Pro. I am going to use Quick Time Pro for this....When I have the files open in QT Pro do I have to 'export' it or can I just 'save as', or is there even a difference? Thanks in advance for your help!

I strongly recommend you use compressor to do the conversion (if it will open the files - since quicktime will open them, it will more than likely do it.
Compressor allows you to customize presets and save them and apply them to multiple files. Although the interface may seem daunting, it's actually pretty simple.
Even if you can edit the avi in fcp, it's not a good idea. Liable to cause problems down the road.

Quick time movies (.mov) files will not play in Iphoto 11.

Quick time movies (.mov) files will not play in Iphoto 11. The thumbnail of the movie shows but when selected only a exclamation mark appears. I rebuilt the library, thumbnails, permissions etc. I also found the movie files in the iphoto database intact and working. Please advise.

You're welcome.
Well believe it or not, that's exactly what the exclamation point means. Search the forum. I've been doing this a while.
Next, I have no interest, commercial or otherwise in Library Manager, I have no shares in the company that makes it. I didn't make it. It's not my software. You could give those guys a million dollars and I'll get nothing from it. I and other expereinced users have recommended it thousands of times on this forum for this problem. Amazing how often it works. Of course, a quick search would have told you that already.
Another: Believe it or not you can use the Rebuild Function of Library Manager for free. You don't need to purchase it for that purpose.
Y'all have a nice paranoid day now.
Regards
TD

Quick time error "a file could not be found"

Quick time error "a file could not be found" when trying to open a file that exist in a directory name including hebrew characters.
When copying the same file to other directory with english characters only, file opens without any problem.
This is very frustrating since my files are located under My documents directory
The full path of the "My Document" directory is:
C:\Documents and Settings\אלון\My Documents.
Also, I have IPOD 5G (with video). iTunes does not have any problems with audio files located under the above directory, but video files for my IPOD have the same problem (since probably it is using Quick time). The problem with iTunes is more frustrating since it does not report any error, but you just cant update video podcasts or add video files to library.
I spent a few days to uderstand this.
Windows XP

http://discussions.apple.com/thread.jspa?threadID=769732
This is a old post from when I had recieved the Error-43 file could not be found. In my case I had a drive lettered F:\ F:\ when changing the drive to a single letter F:\ it resolved the problem, so something you might want to take a look at.

HT203477 I've been trying to burn a DVD edited with FCP_X. I keep getting a "Quick Time Error 0" and my DVD doesn't burn. Why!

I have been getting a "Quick Time Error 0" when I try to burn a DVD even when using a dual layer DVD. The total length is only 2.5 hours long! I've been trying to burn this DVD for 2 months.

Can you tell us how and what does the burn.
Step be step is useful.
Al

TS2621 I receive emails on my Iphone while Outlook is open on my computer but they quickly disappear. Can this be solved?

I receive emails on my Iphone while Outlook is open on my computer but they quickly disappear. Can this be solved?

No. You really can't do that. Not easily at any rate. You would have to set them both up to use POP3, but even then there is no way to guarantee that the phone won't poll the server prior to your computer doing so, pulling down the message from the server.

Compressor Quick Time error: 0

I was sending a sequence from FCP7 to Compressor, but kept getting Failed Quick Time error : 0. Went back to the time line in FCP7 tried to render the sequence but it failed too, after sometime I narrowed down the clip with the problem and found there were frames missing or shifting( not sure what they were doing, take a look at the screen shot you can see right at her shoulders a split screen effect) and a few frames latter the audio dropped out. Here are some screen shots of what it looked like. Because it would render the audio I just cut out the effected video and replaced it with some B- roll and it worked.

no any audio mp3

RUN TIME ERROR IN THIS CODE

HELLO EVERY ONE ...
I AM GETTING run time error in this code.....can u send me the corrected code....
START-OF-SELECTION.
SELECT T1~MATNR
       T1~MEINS
       T1~ERSDA
       T1~ERNAM
       T1~SPART
       T2~MAKTX
       T3~LVORM
       T3~EKGRP
       T3~WERKS
       T4~LABST
       T4~SPEME
       T4~LGORT
       INTO CORRESPONDING FIELDS OF TABLE ITAB
       FROM MARA AS T1
       INNER JOIN MAKT AS T2
       ON T1MATNR = T2MATNR
       INNER JOIN MARC AS T3
       ON T2MATNR = T3NFMAT
       INNER JOIN MARD AS T4
       ON T3MATNR = T4MATNR
       WHERE T1~MATNR IN SMATNR.
Thanx & Regards,
PHANINDER

ok i am sending u the full code.....
REPORT Z_SB_RP_MATERIAL.
TABLES: MARA,
        MARD,
        MAKT,
        MARC,
        EINA,
        EINE.
DATA: BEGIN OF ITAB OCCURS 15,
      MATNR LIKE MARA-MATNR,
      MEINS LIKE MARA-MEINS,
      ERSDA LIKE MARA-ERSDA,
      ERNAM LIKE MARA-ERNAM,
      SPART LIKE MARA-SPART,
      MAKTX LIKE MAKT-MAKTX,
      LVORM LIKE MARC-LVORM,
      EKGRP LIKE MARC-EKGRP,
      WERKS LIKE MARC-WERKS,
      LABST LIKE MARD-LABST,
      SPEME LIKE MARD-SPEME,
      LGORT LIKE MARD-SPEME,
      END OF ITAB.
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-T01.
SELECT-OPTIONS: SMATNR FOR MARA-MATNR,
                SERSDA FOR MARA-ERSDA,
                SWERKS FOR MARC-WERKS,
                SLGORT FOR MARD-LGORT.
SELECTION-SCREEN END OF BLOCK BLK.
TOP-OF-PAGE.
WRITE:/ SY-VLINE,
      02 'S.NO',
      06 SY-VLINE,
      08 'MATNR',
      20 SY-VLINE,
      22 'MEINS',
      32 SY-VLINE,
      34 'ERSDA',
      44 SY-VLINE,
      46 'ERNAM',
      56 SY-VLINE,
      58 'SPART',
      68 SY-VLINE,
      70 'MAKTX',
      80 SY-VLINE,
      82 'LVORM',
      92 SY-VLINE,
      94 'EKGRP',
     104 SY-VLINE,
     106 'WERKS',
     116 SY-VLINE,
     118 'LABST',
     128 SY-VLINE,
     130 'SPEME',
     140 SY-VLINE,
     142 'LGORT',
     152 SY-VLINE.
START-OF-SELECTION.
SELECT T1~MATNR
       T1~MEINS
       T1~ERSDA
       T1~ERNAM
       T1~SPART
       T2~MAKTX
       T3~LVORM
       T3~EKGRP
       T3~WERKS
       T4~LABST
       T4~SPEME
       T4~LGORT
       INTO CORRESPONDING FIELDS OF TABLE ITAB
       FROM MARA AS T1
       INNER JOIN MAKT AS T2
       ON T1MATNR = T2MATNR
       INNER JOIN MARC AS T3
       ON T2MATNR = T3NFMAT
       INNER JOIN MARD AS T4
       ON T3MATNR = T4MATNR
       WHERE T1~MATNR IN SMATNR.
END-OF-SELECTION.
DATA: COUNT(4) TYPE N.
LOOP AT ITAB.
COUNT = COUNT + 1.
WRITE:/ SY-VLINE,
      02 COUNT,
      06 SY-VLINE,
      08 ITAB-MATNR,
      20 SY-VLINE,
      22 ITAB-MEINS,
      32 SY-VLINE,
      34 ITAB-ERSDA,
      44 SY-VLINE,
      46 ITAB-ERNAM,
      56 SY-VLINE,
      58 ITAB-SPART,
      68 SY-VLINE,
      70 ITAB-MAKTX,
      80 SY-VLINE,
      82 ITAB-LVORM,
      92 SY-VLINE,
      94 ITAB-EKGRP,
     104 SY-VLINE,
     106 ITAB-WERKS,
     116 SY-VLINE,
     118 ITAB-LABST,
     128 SY-VLINE,
     130 ITAB-SPEME,
     140 SY-VLINE,
     142 ITAB-LGORT,
     152 SY-VLINE.
ENDLOOP.
THANX & REGARDS,
PHANINDER

HT3775 everytime i m trying to play any movie be it an AVI file or MPEG file, it says quick time cannot play this file. why is this happening ?

everytime i m trying to play any movie on Quick Time be it an AVI file or MPEG file, it says quick time cannot play this file. why is this happening ? Abhijit

Follow the steps to identify the video and audio
format, then look in the list for a codec.
http://insanityflows.net/archive/index.php?title=Quick
Time
JulieJulieJulie,
which file do we download? There are five types of file:
XviDComponent_Srcv0.5.1
XviDComponent_Binv0.5.1
XviDAvi_Import_Preview4src
XviDAvi_Import_Preview4ppc
XviDAvi_Import_Preview4intel
Thanks

HT2673 what it is quick time error -50 (in Compressor) I try to do a mp4.

A few weeks ago I did a quick time from my large project (with subtitles) with no problem. Today a copy from the same project but without subtitles. And it is impossible to do from FCP 7 a quick time. It is out of memory.
and sent to compressor 3.5 it error quick time -50.
I need a mp4. The best way would be with compressor but i cannot do any compression from fcp.Failed!!!!!!
Just a quick time form FCP7 with currents settings. But the result is not a good quality as with mpeg4 in compressor.
my film is 102 Minutes and it is a dv project 4/3.
I have fotos, logos, dv and a few HD ( in DV project).
I did with the same things last time and it was ok. Just the logo are news.JPEG 300dpi.
if someone can helped me I will be really happy.
I work on a macpro (2006) with ssd for my system and three harddisks in raid. (12 TB) for my project.
thanks.

Take a look at this discussion: https://discussions.apple.com/thread/5076224?start=15&tstart=0

Quick time error #2095 - this will solve it

Similar Messages

Maybe you are looking for