Quick time export problem with 29.97 fps

Hi Although Quicktime has an option of puting custome frame rate,I am facing problem exporting Quicktime mov files(H 264) with 29.97 fps.Can anyone plse help me out of this problem.Thanks

I have the same, or similar issues. Any effort to export 29.97 results in a movie with framerate of 30fps. Is this just a bug?
Version 7.6.2 (518)

Similar Messages

Quick Time player cannon be opened because of a problem. Check with developer to make sure Quick Time player works with this version of Mac OS X

"Quick Time Player cannot be opened because of a problem" Futher noted - Check with developer to make sure Quick Time player works with this version of Mac OS X. The player had been working fine on my iMac 24, even after upgrading to Lion. Now, nothing but this message. This involves Quick TIme Player version 10.0. Could upgrading to the 'Pro' version be worthwhile? Can't find anything on support that comes close to answering this perplexing situation.
Thanks,

QuickTime Player 10.0, if that's what you have, is indeed too old for Lion which should have QuickTime Player 10.1. Check your system to see if perhaps you have two copies of QuickTime Player, something quite possible if you moved or renamed QuickTime Player before upgrading.
Hope this helps.

I have windows xp. I downloaded quick time no problem still can't get itunes to install. Still get same message (a program for this install to complete could not be run).

I have windows xp. I downloaded quick time no problem still can't get itunes to install. Still get same message (a program for this install to complete could not be run).

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

How to enable Quick Time Export in photoshopCS5?

Hi..
I m trying to render a time lapse video on PS CS5 and the process works well up until the export window. When i go there the first option under file options, quick time export, is unavailable( grayed out). The only available option is Image sequence. What do i have to do to enable the quicktime movie creation or any other movie format for that matter?
i am using photoshop cs5..
my operating system is windows7.
Thanks in advance.
kalyani

This usually means that the relevant auxiliary components (qtserver32.exe etc.) were not launched/ initialized due to being blocked by some external influence liek a virus scanner or a firewall or the user not having sufficient privileges to launch system level services and load drivers... and of course you will need to install Quicktime in the first place.
Mylenium

QUICK TIME PRO DISAPPEARED WITH THE UPDATE OF MAVERICKS

QUICK TIME PRO DISAPPEARED WITH THE UPDATE OF MAVERICKS, WHERE TO DOWNLOAD IT AGAIN?
THE ONLY OPTION I GET IS TO BUY IT. I KNOW THERE ARE OTHER OPTIONS FOR THIS TYPE OF SOFTWARE BUT SINCE I BOUGHT IT A WHILE AGO AND I PAID FOR IT I WANTED AGAIN. PLEASE ADVISE!

http://support.apple.com/kb/DL923?viewlocale=en_US&locale=en_US
You can download it from the link above and apply your registration to it to unlock the Pro features.

Quick Time export to iMovie problem...

I'm trying to import a video from Quick Time, but it keeps telling me my iMovie hasn't been set up yet. Can anybody help?

david,
did you ever find a solution? i have the same problem....
thanks,
marc

RENDER /EXPORT problems with the new CC 2014

I have updated to the new Premiere pro CC 2014 version. I realise its a standalone upgrade so i deleted the previous cc version from my pc to save disk space...
I have a 3 hour file just raw footage, with no plugins on it....
I have tried rendering to media encoder so many times, it starts the render but stops at random sections, the elapsed times still keep counting up, the remaining time counts up but the yellow bar stays at the same point and does not move...
I have tried exporting directly from Premiere Pro and once again it got to 43% and paused at this ... I have then have to press cancel get the loading mouse pointer circle and i have to close the programs through start manager...
For two days iam trying to export this file to give to a client and it wont do it and there is no solutions on the net...
I have had nothing but problems with every upgrade, on my other PC i still get audio dropouts from files and have to restart the computer.... Paying $50 a month to pull my hair out is a great investment...
please help as Adobe software is on thin ice with me...
Cheers

If CC worked, I think this will allow you to go back
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html
-or http://www.adobe.com/downloads/other-downloads.html

Can't get quick time to work with windows thumbnail

When I purchased a new camera, unlike my old camera that saved files as .avi and which allowed me to use the files with all software and which allowed me to view automatically the thumbnails for the .avi file, my new camera used the garbage .mov from apple. Result: i can't see what the files contains... NO thumbnails in windows! I was told to buy QUick time Pro to be apple to do this. I did what the quicktime "help" (misnomer) said to do: set poster frame, resave the file (try to save it as is, or as quick time mover). THIS DIDN'T WORKED. There was Ø supplementary information. The only thing that works is MANUALLY converting all my .mov from the camera to .avi using quicktime pro. I paid CAD$39 FOR absolutely NOTHING. Any suggestions?
<Edited by Moderator>

Please review the "stickied" threads near the top of this board, about syncing with Windows 7 and Vista. It's all there.
After you've been through and tried everything there is to try, and still have problems, please post back with specific info about exactly what you've tried, what version of Windows 7 you have (32-bit or 64-bit), etc.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Please help i have a Quick time video problems

I am currently working on a mac and have created an
application that displays video. The format im using is quick time
and i have imported the video into director and placed it on the
main stage. When i test the project on the mac it works fine but
when i test the published file on a pc the quicktime file does not
display. I have created the application the published it for
windows using a mac, i then insert the cd rom onto a pc and
everything works but the quictime movie. I orinally thought that it
may have been a quictime version problem on the pc but when i play
the quick time file on its own using a pc it plays fine its just
when its on a cd it doesnt show up. Does anyone have any
suggestions is it the way im publishing it or the file type eq dcr
dxr dir. the file im using is a dxr does this help?

Digital video files are not really imported into a Director
movie. They are only linked. You need to carry the original .mov
files with your Director movie on the CD.

Quick time export

I am exporting a quick time file from my CS 6 time line.
It is a straight time w/o any effects.
So it goes it up till 98% of the render and it comes up with "Unknow Error" message.
I have looked around the forums for this error message but haven't fixed my issue
Here's my setting
Format Quicktime, code H.264, Data rate of 47mbps (limit), encoding quality at 98% and turned on "Use Maximum Render Quality"
It gives the "unknown error" when exporting the tail credits.
So reduced the work area just to the tail end of the movie where it crashed and exported the tail credits and it worked fine.
So my question - Can cs6 write files of 20 GB ? I have 8GB of RAM Windows 7 machine .
I assigned 5GB of RAM for cs6 premier.
thanks

Possibly a more important question, does it work if you do it Jim's way and not when you export a Quicktime file?
Also, 47Mb/s is a very high data rate. What is the data rate of the original footage. It is seldom necessary to export at a higher data rate than the source media.

Export problems with pictures (Vista 64 Bit)

Hi,
I´ve a problem with publishing my CBT from captivate 4 to an executable file (.exe). The CBT contains slides with time-delayed text captions and images.
In the preview mode eveything looks perfect and works well, but when using the "publish" button and exporting it as ".exe" or ".swf" the resulting file always shows the same problem: the included images in the CBT do not appear as the are supposed to do, that means, that no image is faded in (also the static images are working perfect and also the audio track is okay. Has anyone an idea how to fix that problem?
Thanks for your help!
System information:
Adobe Captivate 4 (trial version)
Windows Vista (64 Bit)
latest Flash Player (10)

Hi there
Have you double checked to ensure you don't have a Button, Click Box or Text Entry Box object on the slides where you see the issue?
Each of those object types will cause the project to pause playback. If you have an Image that is timed to appear at perhaps three seconds and an object is pausing the slide at two seconds, the Image doesn't have a chance to display.
Can you insert a screen capture of one of the slides in question so that we may see the Timeline? If you choose to do that, please insert using the Camera icon and do not use the attach function.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Quick time not work with java programming

I'm student and I want to use java .
but it don't work with quick time .
java can't run if I have quick time in my computer .
(It works if I uninstall quick time)
And how can I use iTunes without quicktime Or how can I
fix that problem .
Some one pls. HALP ME!!!!!
Notebook Windows XP Pro

Help Apple, Please!!!!
I have still this problem!
If I install QuickTime (7.0.3) all Java applications will not run.
It works if I uninstall QuickTime...!
Please help!
Thanks

Time capsule - problems with directory

I have got time capsule running about two weeks ago and everything worked well Tuesday evening it came up with a message saying it could not access the directory on my Macbook pro - still doing it so switched it off - any suggestions?

Here's something weird. Another annoying issue I've had with TC is that it slows down the network over time. I'm on Uverse at 10/1.5 and after a week or so it's down to about 2.5 to 3 down. A reboot of my Mac and TC and the problem goes away. So while I'm musing about the problem with the directory, I notice I'm starting to slow again. I reboot, and guess what? My directory is back all the way to April when I set it up.
I'm beginning to suspect that TC/TM doesn't play well with a couple of other applications. One of the companies I'm working with uses a P2P system to send around some monster video files and I'm using something called Azureus (which is also hook up with an application called Vuez that seems to be a YouTube sort of thing). I run Azureus overnight as do most of the development guys I'm working with so we can send around some big video files and have them ready for review and discussion in the morning. I didn't have anything coming in or going out last night and didn't launch the program after the reboot and everyhing is fine so far. It's my first suspect. If not that, then something else maybe is fighting TM for resources? Anyway, I'll keep an eye on this and post if something becomes obvious.

Time offset problems with file i/o

Hello everyone, I'm having a problem with the file i/o VI's. I require my application to save serial data at constant five minute intervals. The problem I'm currently seeing is that on each save to a file a time offset is being added which eventually becomes seconds, then minutes and so on. Since this application is meant to be run for a whole year this is a serious problem.
Attached is the VI, an Arduino program simulating how the DAQ sends data and a file showing my time offset problem.
Any ideas/suggestions/fixes are appreciated.
Thanks
Jose Molina
P.S.
To run the VI upload the code to an Arduino, select it's serial port in the popup VI then click on Ok. The VI will wait for a time that is a modulo of 5 then create a folder structure inside the same location as the LLB. Inside this folder structure should be a file with the data which should be saved every five minutes if left at the default averaging time.
Attachments:
7-8-2012.txt ‏3 KB
Daq_Simulator.zip ‏1 KB
Weather_DAQ.zip ‏117 KB

Sorry I forgot to mention that the averaging time is configurable in the pop up vi at the start. I tried 20 seconds because it's much faster for testing than 5 minutes. Timing is being done by a simple counter that increments each time data is received. So if I receive data the timer increments by 5 because data is sent every 5 seconds. Once the timer is equal to the averaging time the data is sent to the enqueue function and then the blocking dequeue function on the second loop sends the data to the file save vi which then saves the data to the file.
Attachments:
counter.PNG ‏13 KB

Quick time player problems

i have problem because plugin had error - the broken film icon appears and other problem - i did search for answers for a ? icon on quick time icon it did not fix my problem
i am sad because i can't use some sites that contained quick time
i already uninstalled and reinstalled - nothing happens
i have quick time player 7.13 - this is latest and i have flash player 9 and the settings is correct - why the quick player has problem
and also i have IE7
thanks
Message was edited by: rsd2010

edit - after changing the settings - here a question mark on quick time icon[IMG]http://img250.imageshack.us/img250/3076/untitled1sm3.th.jpg[/IMG]
any idea why this happens
Message was edited by: rsd2010

Quick time export problem with 29.97 fps

Similar Messages

Maybe you are looking for