Quick time for iTunes (Code 42 404)

Hello. Just cannot open iTunes anymore....I get the message that a repair or a new installation of Quick time needs to be done (Code 42 404). Can someone help the Swiss boy, please? Thanks a lot and cheers

Get the QuickTime standalone installation. See if you can get that to install properly.
http://www.apple.com/quicktime/download/
Click the button for the one that doesn't have itunes in it.
If you get QT to install OK, then your iTunes install should go OK, also. iTunes uses the QT codecs to play music & video.

Similar Messages

  • Windows 7  64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install  any help?

    windows 7  64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install  any help?

    Hi Tamekia,
    I am sorry to hear nothing has worked yet. I have looked up some additional information and possible solutions. Follow the steps in this document to perform a level-three uninstall, register the Windows Installer Service, and then reinstall the HP software. An uninstall and reinstall of the software deletes and overwrites any of the files that might cause the error and resets the Windows Installer. HP recommends that you download the latest software from the HP Web site to remove any files that might be causing this error.
    Level-three uninstall, and register the Windows Installer Service
    Note: The title of this document is not specific to the issue you are experiencing or the operating system you have, but the 3 steps and instructions are what I suggest we do to resolve the issue you are experiencing.
    Hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Registration of Quick Time for Windows.

    Hi fellas, I have reently downloaded Quick Time for Windows.
    Can anyone tell me how I go about registering as I have no idea how to find the code for registration.
    Thanks in advance.

    These is no registration except for the $30 Pro upgrade that you can purchase.
    Did you buy it?

  • Thread behaves wierdly.. takes more time for less code...

    Hi everyone,
    I am stuck into this probel very badly..i have never seen such a problem before..Thread bottleneck somewhere is the issue i guess,,, plz have a look at the code patiently.. and do reply.. u guys are my last hope on this thing..Thank YOU...
    The Bank method is called by another method which runs 50 threads , so at a time 50 threads could enter this method to record Debit...
    class BankHelper {
    // Some code of bank.. not relevant to my problem public Bank() {
    long time = System.nanoTime();
    abc.recordDebit(); // want to measure how much time this method takes
    abc.recordTimeForDebit(System.nanoTime() - time); // accumulating the total time the above method takes to calculate
    class abc {
    // Some code of bank.. not relevant to my problem
    public synchronized void recordDebit(){
    debit++;
    } // I had put timers aound the ++ and it took not more than 700 to 900 nanoseconds
    public synchronized void recordTimeForDebit(long time){
    record += time;
    Log.debug("Time taken to record drop for DEBIT " + record + " Millis " + time);
    }Answer:
    Record time is 9014 millis for 5000 increments or 5000 calls to recordDebit()
    One can see in the answer that its a huge number when one is expecting it to be somewhere around:
    EXPECTED ANSWER:
    5000 * 800 nanos( it takes 800 nanos for very increment) = 4000000 = 4 millis and its like 9014 millis
    How is there such a huge difference ????????? I have bruised thorugh it for like 3 days... i have lost all my hope.. Plz help..Also look at the next code..
    When i go to see in the log .. it shows me that every record took like from 2000 nanos to 6 to 7 millis i.e.7000000...
    HOw is this even possibly possible ??? where did it get all this extra time from...it should not be more than some 700 to 900 nanos ..
    Is there a bottleneck somewhere ????
    Now part 2:
    This thing has fazzed, dazzled , destroyed me.. I could not understand this and it has tossed all my concepts into the cupboard..
    Same stuff: JUST HAVE A LOOK AND ENJOY AND TELL ME WHATS GOING ON...Same code.. different way of incrementing data i.e synchronization is at a different place..but results are very highly improved...
    class BankHelper {
    // Some code of bank.. not relevant to my problem
    public Bank() {
    long time = System.nanoTime();
    abc.recordDebit(); // want to measure how much time this method takes
    abc.recordTimeForDebit(System.nanoTime() - time); // accumulating the total time the above method takes to calculate
    }The Bank method is called by another method which runs 50 threads , so at a time 50 threads could enter this method to record Debit...
    class abc {
    // Some code of bank.. not relevant to my problem
    public void recordDebit(){
    someotherclass.increment();
    } // this is not synchronized nowwwwwwww
    // I have put timers here too and it took like 1500 to 2500 nanos
    public synchronized void recordTimeForDebit(long time){
    record += time;
    Log.debug("Time taken to record drop for DEBIT " + record + " Millis " + time);
    class someotherclass{
    // Not relevant code
    public void increment(){
    someotherclass1.increment1();
    class someotherclass1{
    // Not relevant code
    public void increment1(){
    someotherclass2.increment2();
    class someotherclass2{
    // Not relevant code
    public synchronized void increment2(){
    someotherclass3.increment3();
    } //now its synchronized
    class someotherclass3{
    // Not relevat code
    public synchronized void increment3(){
    debit++;
    } //now its synchronized
    }ANSWER: Record is 135 millis for 5000 increments or 5000 calls to recordDebit()
    Expected time was : 5000 * 2500 = 125000000 = 125 millis (WOW .. AS EXPECTED)
    Please don't ask me why this code has been written this way..i know it goes and increment and does the same thing...but somehow when i measured it..
    overall time or the accumulated time for both codes varied like in huge numbers...even though latter code is actually a superset of previous code..
    HOW IS THERE SUCH A HUGE DIFFERENCE BETWEEN THE NUMBERS ???
    COULD BE BECAUSE OF THE POINT OF SYNCHRONIZATION ???
    Thank you..for going through all this..

    Triple post - http://forums.sun.com/thread.jspa?threadID=5334258&messageID=10438241#10438241

  • I love osx mountain lion my question is why was air play taken out of specific app like quick time and iTunes i dont always want to display my whole computer when i am in airplay mode

    i love osx mountain lion my question is why was air play taken out of specific app like quick time and iTunes i dont always want to display my whole computer when i am in airplay mode

    Funny, my iTunes still has AirPlay capability without AirPlay Mirroring active.

  • Unstalled QT at support direction to re-load iTunes.  Have Quick Time Pro validation code.  Where/how do I reenter the product code (without having to repurchase it)?

    Had to uninstall/reinstall Quick Time.  Have product code for Quick Time Pro.  However, how does one re-enter this without having to purchase it all over again?

    Open QuickTime Player and look under the Edit menu.

  • Quick time pro dowload (code)!!!!, please help

    I am a Mexican mac user, just bouht my power book g4 in the States and I would very much like to upgrade to qucick tieme PRO. My problem is that in the download page for users outside the US, Mexico does not apear as an option. Does any one how can I get the Quick time pro code from here?
    I thank you in advace for your help.

    The problem is that Apple doesn't have an online store in Mexico, so there doesn't appear to be an online method of billing for the pro key. You can get Quicktime Pro bundled with other software, such as DVD Studio Pro or Final Cut, but you are probably going to need to call Apple directly in Mexico to see if there are any options for a standalone pro key...
    Mexico City: 01-800-277-5322
    Outside Mexico City: 55 5209-1280

  • Help! problem installing  quick time for windows

    every time I try to install the install shield wizard goes all the way to the end like it's install and then says "The wizard was interrupted before Quick Time could be completely installed. .... The system has not been modified. To install this program at a later time run the installation again.
    any ideas most appricated.

    hiya!
    "The wizard was interrupted before Quick Time could be completely installed. .... The system has not been modified. To install this program at a later time run the installation again.
    for that one, first see:
    iTunes for Windows installation quits with 1607 error, while publishing product information, or is interrupted
    (although the article is about an itunes installation error, the same underlying cause(s) is/are afoot with your QT version of this error message.)
    love, b

  • Quick time for windows didn't finish with download

    I had itunes in my computer but, by error I remove Quick Time from computer in consecuense I remove itunes too, I tried to download itunes 7, but it is downloading in status: "Initializing quick time types" it is stock in this part, never finish the downloading. What do I have to do?

    Get the QuickTime standalone installation. See if you can get that to install properly.
    http://www.apple.com/quicktime/download/
    Click the button for the one that doesn't have itunes in it.
    If you get QT to install OK, then your iTunes install should go OK, also. iTunes uses the QT codecs to play music & video.

  • Quick Time for Windows

    I currently have Quick Time 6.5.2 and I am trying to update to the newest one so I can sync my iphone that requires the 7.7. I receive a message saying: "the feature that you are trying to use is on a network resource that is unavailable-click ok to try again or enter an alternate path to a folder containing the installation package 'QuickTime. msi'
    I am lost what do I need to do?

    I receive a message saying: "the feature that you are trying to use is on a network resource that is unavailable-click ok to try again or enter an alternate path to a folder containing the installation package 'QuickTime. msi'
    With that one, let's try the following procedure.
    Download and install the Windows Installer CleanUp utility:
    Description of the Windows Installer CleanUp Utility
    Now run the utility (“Start > All Programs > Windows Install Clean Up”), select any QuickTime entries in the list of programs that appears in CleanUp, and then click “Remove”.
    Next, we’ll manually remove leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx. (If “Hide filename extensions for known file types” is enabled on the PC, then those two files will appear as “QuickTime” and QuickTimeVR”.)
    7. Restart your computer.
    Does an iTunes install go through properly now?

  • Can I set up a timer for iTunes Match?

    I use iTunes on a daily basis at my small graphic design business. I've loved having access to my large iTunes library both here and at home.
    Unfortunately, the internet connection I have at work is DSL and, as you can imagine, the upload speeds are horribly slow.
    While I love having iTunes Match. I get frustrated whenever the iTunes updates Match. This slows everything down to a crawl, including all of the other people sharing the wireless connection. This happens whenever I add a new mp3 to the library. Sometimes these mp3s are long mixes and take forever to upload. I probably do this on a daily basis.
    My question to you all is, is it possible to set up a timer with iTunes Match? In other words, could I program iTunes Match to update everything at night when I'm not using the computer and therefore not interfering with my internet connection during the day?
    I realize that most people reading this are not using an internet connection based in the late 90's, like we are. Believe me, I've looked into upgrading and it seems as if we're stuck with what we have for the foreseeable future.
    I wonder if anyone has ideas for a work-around to this issue? 
    Thanks much.

    You might want to look into using Automator to accomplish what you want to do. For example, create an Automator action/script to look in a certain folder at a certain and move the audio files to the "automatically add to iTunes" folder, then have it launch iTunes which would then kick off the iTunes Match process. You could have it do all this after everyone has left the office for the night.
    It might require some experimentation, though, to get it just right.

  • Recent playback issues with Quick Time for Windows

    Hi there. I recently started having choppy playback in Quick Time of
    .mov files composed of some footage shot on Sony XDCAM EX. Since I do not have the Sony codec on my PC, I had these .mov files converted to QT files with the H.264 codec by editors who use Final Cut Pro. They play badly, and now, so do all other mov. and MP-4 files for which I always used Quick Time.
    Currenlty have QT 7.62.
    Would Quick Time Pro 7 be the answer for a return to normal, fluid playback???
    Any help would be greatly appreciated.
    Thanks,
    Keith

    It wouldn't make a difference the pro version doesn't enhance the ability of what you can play or how good it plays. It just gives added feature's like being able to convert a .mov to .avi or save a file off a website.

  • Quick Time for Windows 98 please

    Been online for hours trying to download something that will play this stupid little animation .mov file that is from a stopmo animator. I really am working hard for what might be only half a minute. Do you still have an older version of your Quick Time that will work on my Windows 98 computer?? Some people cannot afford new computers.

    QuickTime 6.5.2 for Windows, which will run under Windows 98, is still available here:
    http://www.apple.com/support/downloads/quicktime652forwindows.html
    As Kirk said, it doesn't have the H.264 codec included in QuickTime 7, but 6.5.2 will play most of the other QuickTime formats.
    BTW, a quick search through the Downloads link above turned this up for me in about ten seconds. Just so you know for future; might save you a lot of time waiting for a response. Regards.

  • Execution Time for T.Code

    Hi Experts,
    I want to know the exact execution time for a t.code. I check it in ST03 or ST03n but I can't get proper data. In ST03 I get the average and total response time but I want the exact ececution or response  time.
    Waiting for your inputs.
    Regards,
    Nisit

    From SAP
    For old verions
    In ST03 transaction
    click on "Performance Database" tab 
    Then double click on Total
    It will open Dialogue box CHOOSE TIME PERIOD  ,select the time period and then click on the required date
    Then Click on Transaction Profile ,here it will give the list of transaction executed and its execution time
    In STO3N , you will find "TRANSACTION PROFILE" under Analysis views, when you double click on it will give present days Transaction codes executed.
    If you want the month data then go to Export mode in ST03n ,you will get the data "TRANSACTION PROFILE" under Analysis views  .
    Regards,
    Beena

  • How to find the Execution Time for Java Code?

    * Hi everyone , i want to calculate the execution time for my process in java
    * The following was the ouput for my coding,
    O/P:-
    This run took 0 Hours ;1.31 Minutes ;78.36 Seconds
    *** In the above output , the output should come exactly what hours , minutes and seconds for my process,
    but in my code the minutes are converted into seconds(It should not)...
    * Here is my coding,
        static long start_time;
        public static void startTime()
            start_time = System.currentTimeMillis();
        public static void endTime()
            DecimalFormat df = new DecimalFormat("##.##");
            long end_time = System.currentTimeMillis();
            float t = end_time - start_time;
            float sec = t / 1000;
            float min = 0, hr = 0;
            if (sec > 60) {
                min = sec / 60;
            if (min > 60) {
                hr = min / 60;
            System.out.println("This run took " + df.format(hr) + " Hours ;"+ df.format(min) + " Minutes ;" + df.format(sec) + " Seconds");
        }* How to Calcualte exact timing for my process....
    * Thanks

    * Hi flounder, Is following code will wotk perfectly?
         public static void endTime()
              DecimalFormat df = new DecimalFormat("##.##");
              long end_time = System.currentTimeMillis();
              float t = end_time - start_time;
              float sec = t / 1000;
              float min = 0, hr = 0;
              while(sec >= 60){
         min++;
         sec = sec -60;
         if (min >= 60){
         min = 0; //or min = min -60;
         hr++;
              System.out.println("This run took " + df.format(hr) + " Hours ;"+ df.format(min) + " Minutes ;" + df.format(sec) + " Seconds");
         }

Maybe you are looking for