Quick time keeps making my files bigger??, Quick time keeps making my files bigger??

When i download a vindeo into quick time it makes the file bigger when i want to be making it smaller! How do i change this?

When i download a vindeo into quick time it makes the file bigger when i want to be making it smaller! How do i change this?
Not much information to go on since there could be more than one explanation.
In most cases, the file size is primarily directly proportional to the combined total data rate for all data contained in the file. (I.e., if the total data rate of the file is doubled, then the file size is doubled.) So the first step is usually to compare the data rates of the files in question.
The second step would be to compare the compression formats being used. Some compression formats are more efficient than others. (I.e., some compression formats simply operate in different ranges of data rates or may have options and/or settings that tend to vary or limit data rates or vasry the distribution of data within the file.)
Lastly, some compression formats have specific peculiarities depending on how the data is stored or how the file size is calculated/reported.
Once again, since you have provided no specifics here, it is virtually impossible to provide any definitive answer to your question regarding how to change this.

Similar Messages

  • Trying to watch a video on quick time player and i keep getting this message You may need to install additional software to open this type of file. what do i need to install and how

    Trying to watch a video on quick time player and i keep getting this message You may need to install additional software to open this type of file. what do i need to install and how

    I believe there is a technique which uses some similar suggestion to unwittingly tempt the user into installing malware, in order to be able to watch some (usually sexually explicit) video, so be aware of this ruse.
    The only things I would download would be Perian that extends Quicktime, available here,
    http://www.perian.org/
    and if that did not do it, then try VLC to use instead of Quicktime.

  • How do i unistall quicktime if i keep getting the installer note of: the feature you are trying to use on a network resource that is unavailable. i cannot find Quick Time.msi file anywhere. so i cannot uninstall or re install quick time

    the feature you are trying to use on a network resource that is unavailable. i cannot find Quick Time.msi file anywhere. so i cannot uninstall or re install quick time
    any suggestions please??????

    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing QuickTime again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • In Internet Explorer under File, It had an option SEND TO DESKTOP which I used all the time when I wanted to keep an Icon for quick reference. Is there anything similar in Firefox?

    I guess I said it all in my question above. I would like to know how to add different options to the menu.

    See [[creating a desktop shortcut to a web page]].
    You can also use an add-on such as [http://www.pikey.me.uk/mozilla/?addon=cs Create Shortcut] or [https://addons.mozilla.org/en-US/firefox/addon/66/ deskCut].

  • I'm trying to open the latest i-tunes but it keeps saying I need quick time 7.5 or higher

    I'm trying to open the latest i-tunes but it keeps saying I need quick time 7.5 or higher (which I do) and I have no updates available for quicktime

    QuickTime 7.5.5 for Leopard - http://support.apple.com/kb/DL27
    QuickTime 7.7 for Leopard - http://support.apple.com/kb/dl761
    = New version of Quicktime installed but application reports it needs to have that version installed =
    Open Application > Utilities > System Profiler and check the Quicktime version in Frameworks vs. the version in Applications.  One person had re-installed their operating system.  It had kept the newer Player application but had reverted to an earlier version of the underlying support framework files which many applications utilize.  Re-installing Quicktime 7.7 took care of the problem.  Do this manually, not with Software Update.
    Installation get stuck at "configuring installation" - https://discussions.apple.com/thread/2592979?threadID=2592979  - uninstall Quicktime before installing.

  • I am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully,

    i am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully, it just keeps my mac (old 1.6Ghz 2.5 GB sdram G5 still good for most stuff i need) spinning for ever but i can see compression type H.264 selected and the other setting but i can not select any other options as it still thinking but never opens! why is this happening how do i get round it?
    my work flow is: 300 images shot on a 5d mark II medium jpegs opened in Light Room cropped to 16:9 then exported and opened in quick time i can save a .mov H264 giving me files sizes of 14 mb for a 16 second time lapse, mp4 9 mb. the only way i can get large files is saving as a self contained movie then i get 300mb files.
    i need to save my files 1920 x 1080 photo jpeg codec as i want HD quality.
    i am sure there is a simple way round this?
    thanks guys!

    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. 
    How large is your hard drive and how much hard drive space do you have left? 

  • Windows 7  64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install  any help?

    windows 7  64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install  any help?

    Hi Tamekia,
    I am sorry to hear nothing has worked yet. I have looked up some additional information and possible solutions. Follow the steps in this document to perform a level-three uninstall, register the Windows Installer Service, and then reinstall the HP software. An uninstall and reinstall of the software deletes and overwrites any of the files that might cause the error and resets the Windows Installer. HP recommends that you download the latest software from the HP Web site to remove any files that might be causing this error.
    Level-three uninstall, and register the Windows Installer Service
    Note: The title of this document is not specific to the issue you are experiencing or the operating system you have, but the 3 steps and instructions are what I suggest we do to resolve the issue you are experiencing.
    Hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • How to import mpg files & quick time question

    Hello. I found some previous answers here and followed them, which brings me to now. I bought the QT 6 MPEG-2 PLAYBACK-MAC OS X-INT plug in to allow me to bring mpg files from my sony digital camcorder. I keep getting a message that 'this file is not a movie file'. I don't know how to tell if the MPEG-2 plug in is installed, how can I find out in Quick Time? I have Quick Time Pro.
    What application would be best for me to start editing movies? I have IMovie 6.
    Any help is greatly appreciated.
    thanks

    Hi Trib and welcome to the forums!
    Mpeg2 is the standard compressed final delivery format of a DVD, and is not intended for further editing.
    You need to convert your mpeg2 files to a DV stream that you can edit in iMovie 6.
    For that you need mpegStreamclip:
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    which is free, but you must also have the Apple mpeg2 plugin which you have already installed.

  • HT3775 Quick Time Player not opening a mpg file

    I have inserted a disk (video) that someone made for me.  Quick time player keeps telling me that the movie (mpg) file cannot be opened.  Can anyone tell me what's wrong or what I need to do to?

    There is no single codec for movies that have .avi extensions. AVI is a container format, not a specific type of file. An AVI movie may use one of the Indeo codecs (there are at least four that I'm aware of, none of which have been ported to Mac OS X) or one of the various flavors of DivX, among other possibilities. You'll have to find out what codec was used for the movies you want to view to determine what you need. Note that not all codecs for the various .avi movies are available for QuickTime.  
    If you want to try "hit and miss", Perian, which rolls several codecs into one package, might work. If not, you can try the codecs at http://www.divx.com/ and http://www.3ivx.com/ and see if one of them will work for you. Do not install both Perian and the DiVX/3iVX codecs at the same time. 
    If you just want to play the movie any way you can, you can also give the aforementioned VLC Media Player a try.
    Regards.

  • MBP shuts down when making Quick time conversion

    MBP core duo 1.83 2G ram current updated software.
    It shuts down when I try to do a Quick time conversion..
    went to the Genius bar and booted from another drive and my macbook still shut down when doing a QT conversion. He says that means it is NOT a software issue.. blames the logic bd.. 310. for a fix if I send it out.. they would keep it overnight and do testing for free.
    the console says "previous shut down cause: 3"... He said that was a code for shutting down by holding the button for 4 seconds and got all puzzled about that.
    I have been able to convert files using Compressor which I have to do before I can use the go pro video in final cut.
    it might have shut down once during a conversion that way.

    Monitor your CPU core temp and see at what temp the computer shuts off. Also, download SystemLoad and run that for awhile to stress the processor. See if you can get it to shut down with that and at what temp.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

  • Quick Time Pro - The movie could not be open. This is not a movie file.

    I upgraded to 7.4.5 and now I can't view any of my AVI files. I am getting the following error message.
    The movie could not be open. This is not a movie file. Please help!

    It is most likley a problem in the new Quick Time (QT). My Updater downloaded the new QT 7.4.5 two Saturdays ago. I have been making movies in iMovie then posting them to YouTube. In the beginning I uploaded the movies as MOVs but soon discovered AVI files (larger file and added time to upload) had more clarity when viewed on YouTube. Once the new QT 7.4.5 downloaded all my AVIs had picture, but no sound! I downloaded the Perian component as posted in QT discussions. The sound returned to the AVI files. However, when I Exported an AVI movie from iMovie the picture quality was worse than MOV. There is something wrong with the new QT 7.4.5 when working with AVI, my AVI movies look terrible. These AVI files were all downloaded from my Ultra Flip Video camera with Flip’s codec 3vix. Flip is aware of this problem and acknowledged it last week, I sure hope Apple is also aware.

  • I trying to download itunes on my laptop several times but I keep getting a Quick Time error -2096. How do I remove this error?

    I trying to download itunes on my laptop several times but I keep getting a Quick Time error -2096. How do I remove this error?

    Do you see the problem if you turn off Compatibility Mode for QuickTime?
    Right-click on the QuickTimePlayer application (located in C:\Program Files\QuickTime) and choose Properties from the shortcut menu.
    In the Properties window, click the Compatibility tab
    Deselect all checkboxes currently selected in the Compatibility tab.
    Click Apply.
    Close the Properties window.
    Check out this Apple document -> Error -2096 message when opening QuickTime for Windows in Compatibility Mode

  • I'm modifying someone else's website for the first time (noob = yes).  I only have ftp access to the site server.  Before uploading changes, is there a easy/quick/recommended/etc way to make a copy of the files I'm about to replace?

    Great, first post, sorry for the title.  But to repeat it:
    I'm modifying someone else's website for the first time (noob = yes).  I only have ftp access to the site server.  Before uploading changes, is there a easy/quick/recommended/etc way to make a copy of the files I'm about to replace?

    You can use the Dreamweaver FTP (or a different FTP client) to completely copy the original website to your development computer, then, before making changes, you can copy the whole thing to a directory called something like "website original"
    If you want to run both the old and new sites on the remote server, this is often possible. Add a folder/directory to the server and call it something like "new" and upload the new files there until you are ready to replace the old site
    All of this you can do with FTP

  • Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?

    Hi, Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?

    Absolutely.  Go to File->Export->QuickTime Movie (do NOT use QuickTime Conversion).  Make sure you check the Self-Contained box.  The export will be an exact copy of your Sequence, complete with any filters or other effects you've added.  Import the self-contained movie back into the project (or another project) if needed.
    -DH

  • I'm attempting to migrate files from iMac to new MacBook air. The estimated time shown on the display is over ten hours. Is that correct? Is there a way to do it quicker?

    I'm attempting to migrate files from iMac to new MacBook air. The estimated time shown on the display is over ten hours. Is that correct? Is there a way to do it quicker?

    It's quite possible, since you are using an MBA without Firewire, that it could take that long.
    A Basic Guide for Migrating to Intel-Macs
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate.  Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    >Classic Environment, and subsequently any Mac OS 9 or earlier applications
    >Screensavers written for the PowerPC
    >System Preference add-ons
    >All Unsanity Haxies
    >Browser and other plug-ins
    >Contextual Menu Items
    >Applications which specifically require the PowerPC G5
    >Kernel extensions
    >Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard.  The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.  Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
    will work better when moving from PowerPC to Intel Macs.   The initial section below discusses Target Disk Mode.  It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
    1. Repair the hard drive and permissions using Disk Utility.
    2. Backup your data.  This is vitally important in case you make a mistake or there's some other problem.
    3. Connect a Firewire cable between your old Mac and your new Intel Mac.
    4. Startup your old Mac in Target Disk Mode.
    5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
    >MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
    >MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
    >MacBook Air- Migration Tips and Tricks;
    >MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    >In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    >
    >In your /Home/Library/ folder:
    >/Home/Library/Application Support/AddressBook (copy the whole folder)
    >/Home/Library/Application Support/iCal (copy the whole folder)
    >Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    >
    >/Home/Library/Keychains (copy the whole folder)
    >/Home/Library/Mail (copy the whole folder)
    >/Home/Library/Preferences/ (copy the whole folder)
    >/Home /Library/Calendars (copy the whole folder)
    >/Home /Library/iTunes (copy the whole folder)
    >/Home /Library/Safari (copy the whole folder)
    >
    >If you want cookies:
    >
    >/Home/Library/Cookies/Cookies.plist
    >/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    >
    >For Entourage users:
    >
    >Entourage is in /Home/Documents/Microsoft User Data
    >Also in /Home/Library/Preferences/Microsoft
    >
    >Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the  Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.
    Revised 1/6/2009

Maybe you are looking for

  • I updated mi iPad to to iOS 6 now it says connector to iTunes but I no longer have a computer? Please help

    After trying to update to iOS 6 my iPad now say connect to iTunes however I only use my phone and iPad and do not have a computer with iTunes. What do I need to do?

  • Burning folders to separate songs in MP3 discs

    Does anyone know how to burn mp3 files and catagorize them so that when u burn them u can have them in different files that a car mp3/cd player can recognize the files. I say this because i dont like hitting >> on the cd player 99 times to get to the

  • Changing Physical Data Source in DAC

    I need to extract data from DEV2 instance of Siebel instead of DEV1. So i have change the database name, user name and password under Physical Data Sources tab under Setup for the SEBL_VERT_80 datasource. I have generated parameters and rebuilt the e

  • Registering Cinema 4D Lite

    When I originally opened C4D Lite I skipped over the registration, and now I'm wanting to use the MoGraph menu. C4D tells me to register the product so I can access the MoGraph features, I've looked in the menus and cannot seem to locate the "registe

  • Navigation Issue on HC 91, Tools 8.51, SQL Server 2008 on Windows 2008

    Hi Guys, I installed HCM 91 -Tools 851-SQL Server 2008 on Windows 2008 server. App server running perfectly, initiated web server fine. When I login in n-tier/web via PS userid, navigation to Panels are fine but when I try to click on any page, it gi