Quick Time MPG Transfers to Ipod Video NO SOUND

I finally was able to transfer a mpg to my IPOD VIDEO but the sound did not come through. Is there a solution for this and will it be compatible with Windows XP?

See this...
iPod Plays Video But Not Audio - Muxed Files
Merry Christmas
btabz

Similar Messages

Quick Time Pro installation for Ipod videos

I have been trying to download video files to my Ipod. I read where I needed Quick Time 7 so I downloaded it. It didn;t work. I was told I needed Quicktime 7 Pro. Bought it. When I followed instructions for converting my video files I received an error message saying my video files were not movie files. After discussing the issue with an Apple support person it looks as if I do not have Apple Quick Time 7 Pro. I followed the directions and when I open Quicktime in the control panel it has my name and unlock key and says Quicktime 7 Pro. However when I open Quick Time Player and go to ABOUT...it says Quicktime 7.0.3. How do I get what I paid for so that I can convert my video files and treansfer them to my IPod? Help!

QT Pro is not a separate application. The Pro key unlocks the Pro capabilities that are in the free version of the Player. You should find a preset for iPod videos by loading the source files and using Export from the File menu. Note that QT will not export the sound track from muxed mpegs, like mpeg-1 or mpeg-2. QT Mpeg Limitations
For those you will have to try some of the Windows applications that have appeared since the iPod was released. Here is the link for one of those Windows iPod exporters that should work with avi and mpeg files. It is freeware.
http://www.videora.com/en-us/Converter/iPod/

How can i view .wmv file--Safari 10.7.4 installed Flip4Mac and Quick Time open file, w/o video, only sound?

I used to be able to view .wmv files before OSX update version 10.7.4. Right now I get sound only using either Quich Time or Flip4Mac. Is there a fix for this issue? What else should I try? Thanks for any suggestions you may have.

I used to be able to view .wmv files before OSX update version 10.7.4. Right now I get sound only using either Quich Time or Flip4Mac. Is there a fix for this issue? What else should I try? Thanks for any suggestions you may have.

I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see. The reason is that Quick Time will not support the video. What can I do to be able to get these videos?

I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see. The reason is that Quick Time will not support the video. What can I do to be able to get these videos? I have all ready download Adobe Flash Player and installed it but it has not effect.

Get Flip4Mac (for Windows Media videos):
http://dynamic.telestream.net/downloads/download-flip4macwmv.asp?prodid=flip4mac wmv
And Perian for everything else:
http://perian.org/
You should be able to play most videos with QuickTime player once both are installed.

HT3775 I have received an error message that my quick time player cannot open my video as my video seems to be in a mov format, can you help me choose a format to open on my mac

I was trying to open a video I had saved in my mac, but received an error message that my video couldn't be opened with Quick Time in the format it was in, as far as I could tell the format it was in was mov.....does anyone know for format I need to change it to?
The examples of different format given were
MPEG-2 (OS X Lion or later)
MPEG-4 (Part 2)
H.264
H.263
H.261
Apple ProRes
Apple Pixlet
Animation
Cinepak
Component Video
DV
DVC Pro 50
Graphics
Motion JPEG
Photo JPEG
Sorenson Video 2
Sorenson Video 3

I am getting an error message when I try to open an attachment to an email entitled movie.avi. It says I may need more software but its not a helpful message because it does not say whta software. Lame and frustrating.

I have a Mac Os x version 10.5.8, and my current quick time will not play some video footage; which version of quick time should I have or what else would help?

When I try to run certain video, the video stops while the sound continues. What is wrong. What version of Quick time should I be using?

Or is a file that is not supported by QT.
You can use Perian http://perian.org/

I bought Quick Time Pro to help edit videos and now cannot SEE any video through my Quick Time Player

I can hear the audio for each video BUT the window for SEEING the videos does not open- it remains "closed" on top of the start/stop/pause controller. HOW can I fix this so I can also see the videos I want to edit?
It worked fine the day I uploaded and began using Quick Time Pro, but has not since that day....

If it is still slow after removing Symantec, you may need a RAM upgrade. Yosemite can run very poorly on older machines with only 4 GB RAM.

How do I change the settings in quick time player to screen record video using less hard drive space?

how do I change the settings in quick time player to use less hard drive space when performing a screen record? When I screen record a video lets say from vimeo, QTP seems to use a lot of hard drive space. Please help. Are there settings some where to adjust to slim down the video size? Thanks for your input.

I just did a short SR test, first I exported to 480p, then I saved the file. Now I have 2 files one 11.9mb (export) and the other 42.8mb (save). I then took the save file and performed an export on it to 480p. Guess what, it saved at 11.9mb. So it seemed to save me 3/4 of the space. Lets see what happens with a 17 minute SR. Thanks!
Any suggestions on getting the sound louder with the SR?
For anyone else ever seeing this post, for me the best was using an external speaker whether wired or bluetooth, facing the left side of the computer where the internal mic hole is. Good Luck!

X Quick Time Digitizer shows [Missing] DV Video

I'm using FCP 5.1.4 and camera Sony HDR FX1. Trying to capture DV footage but can't somehow.
I can operate camera remotly but can't capture video (it doesn't apear on screen).
When i try to press 'capture' in log and capture option, this comunicate apears:
"Attempt to capture a video without video device selected.
Please select a video device in your capture presets and try again".
So i went to>Final Cut Pro>Audio/Video Settings...>Capture Presets>DV Pal 48 kHZ and Quick Time Video Settings shows [Missing] DV Video and the only option it gives me is to select NONE.
What should i do??
Thank you.

Hi Brian,
Thanx for reply.
I've done exactly what you said. My system can see FX1.
My firewire cable is fine too (got two anyway).
I can capture fine in iMovie (so mac and camera comunicates fine).
In FCP i've got easy setup set to DV Pal. It allows me to remote control camera, I can play it, but image doesn't came thrue (only sound). I can't see the image on my mac and if i try to capture, the same comunicate apears, as before.
I went to Audio/Video Settings>Capture Presets and in Summary it says:
WARNING: Video Device DV Video is missing
Canon DV using Pal
25 Frames per second
DV-PAL at best quality
etc.
I can capture HDV footage, but only if i use HDV Apple intermediate codec.
If i try to set it to HDV 1080i50 (as i use to in older FCP) it doesn't work.
I'd like to concentrate on DV format just now anyway.
Any ideas what i'm doing wrong?
Thanx

Help! Time to get an iPod Video?

Help!
My 3rd gen. iPod is now dying.... generating "gee.... gee..." sound when playing music - Seems the hard disk is dying.
Wish to purchase an iPod Video, however I'm now using a Powerbook G4 12" 867MHz, which only has USB 1.1 ports!!!!!
I don't mind upgrade my Powerbook to MacBook Pro, but the current hardware config of MacBook Pro is not the best I think, and better MacBook Pros might be available later.....
Or should I buy an iPod Photo now which still have firewire support?
PowerBook G4 12" Mac OS X (10.4.4) 867 MHz / 640MB RAM / 60G HD

I have also almost the same combination and there is no problem with USB 1.1.
It's not so fast as 2.0, but works fine. I'm not so hurry
-Harri
G4, 867 MHz Mac OS X (10.4.4) + 2 x LaCie 250 Gb + Video iPod 60 Gb

IPod Video without Sound, Partial name

I transfer my videos to my iPod and they show up on there and everything, I just can't hear it. Yes, I've converted them and everything.
Why can't I hear my videos? And how can I fix that?
Plus, I named my iPod "Ash's PARTAY Machine" But on my iPod it says, "Ash's PARTA" ....Why?

First, for the name thing, I just picked a name that
was too long.
The name was not too long for say, it is just that Windows can only display so many characters for a device's name. If the iPod was formatted for use with a mac, the name would most likely be displayed in its entirety.
As for the video and sound, I needed the Videora
converter to make the videos compatible for iPod
Video.
Again, your files were Muxed. Videora can handle them, keeping the sound with the video.
Glad the issue was worked out!
btabz

Computer shuts down when itunes store or quick time tries to open

I recently downloaded the latest version of itunes and quick time. when I try to go to the itunes store, try to use quick time or if a music video tries to load onto the itunes library from videora ipod converter, the computer shuts down. It happens every time. can anyone help.

iTunes will not download, but gives me the error code " not a 32bid win program" I am running a 64 bit system and have tried all the fixes that are listed.
Doublechecking. In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

IPod video & audio not syncronizing...

Hi there,
I bought my new iPod video 30GB from US recently and I have problem when I convert and upload video song to ipod. When I play the video song, the video and audio doesnt match/syncronize (i.e; audio sound can be heard after 2-3 seconds when the video song is played)
Please can anyone help me how do I solve this? I have been using professional version of Quick time player to convert the video songs.
Waiting for your reply soon...
Thanks
Compaq Presario Windows XP iPod 30GB video

Not sure where you got this video that you converted, but Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly, and this may be the issue.
You need a 3rd party converter to convert the file with both audio and video.
Videora is one, and there are others.
http://www.videora.com/en-us/Converter/

I have a issue screen recording on my mac with quick time player. I have a 13' MacBook Air and i am able to screen record perfectly. But when I Plug in my head phones in to the port I am not able to record the audio.Only just the screen rec

I would like to know If I will be able to record(using quick time player) both audio and video on my mac with head phones connected
My Mac - OSX Version 10.9.3 , Processor 1.8GHz Intel core i5, Memory 4GB 1600 Mhz DDR3

Hi Sansony,
Welcome to the Apple Support Communities!
I understand you would like to record audio from the headphones you connected to your computer. When recording audio with QuickTime Player, you can choose to use the built-in microphone, an external microphone you’ve connected, or a microphone from a connected Apple display. Please use the following article as a reference.
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
Clicking the triangle icon gives you additional options, such as letting you choose whether to use the built-in microphone on your Mac, an external microphone you've connected to your Mac, a microphone from a connected Apple display, or the option to simply use no microphone at all. The triangle also allows you to adjust the finished quality of your screen recording, select whether or not your mouse clicks are shown during the recording (the pointer is highlighted when you click), and to select what location (on your Mac) to save your screen recording when finished.
Have a great day,
Joe

I Killed Quick time (going to reinstall OSX and need ac3codec for mac)

Hi,
I killed my quick time. I have a video file I want to play (a project I'm working on with others.) anyway, it has 5.1 audio. The video plays, but no audio. I put the file on the XP and still no audio. I played it on Divx player. It says I'm missing Tag 8192.
So after a quick Google, i get ac3codec for the XP, install... and i get the audio on the XP with the video.
Off to find the codec for the mac...I found a file, i forget where i got it, placed it in the /libary/qucktime. and none of my .avi files will play any more, just a white screen. my .mov files seem to work fine. I remove the codec, and QT is still busted.
In reading the fourms here, it seems Quicktime is part of OSX, so there is no real, uninstall...reinstall thing, is that correct? Unless there is another suggestion, I plan on reinstalling OSX tonight. This should restore QT.
Also, is there a ac3codec type thing for the mac?

Ok, i'm getting really bent. I don't get how these played before and now they don't. I'm still not getting it to work.
Here is the movie format: XVID, 608 x 272, Unknown
I went here to get a codec: http://www.xvidmovies.com/mac/
i down loaded the codec for OSX
I end up with a file called: XVIDDelegate and i put in in the root of the HD\Libary\QuickTime.
Still does not play.
there is an instruction file.
"First you need DivX 5 (http://www.divx.com/divx/mac/). Then, if you are
on MacOS X, drop "XVIDDelegate.component" into /Library/QuickTime, or if
you are on MacOS 9, drop "XVIDDelegatePPC" into your Extensions folder
and restart."
So i go to dvix.com, and it seems i have to pay $20. I'm really confused, maybe its just frustration blinding me. Most of my avi files played, now they don't.
Thoughts?

Quick Time MPG Transfers to Ipod Video NO SOUND

Similar Messages

Maybe you are looking for