Quick Time pro does not start at all  and gives an error "Fehler 46: K"

I installed QT pr0 without problems. But QT does not start. After doubleclicking there is a short message with the above error code "Fehler 46:K" No movie can be played is thera any support for pro customer`? Is the Problem known? Installing and uninstalling does not help. Procedures recommanded from apple - empty temp etc. did not help either. Google did only find 2 posts none with valuable information.

As I'm sure you are already aware, that HDD has failed to the point it cannot find a bootable volume.
If you have a backup, no worries.
If you do not have a backup, you could try to reinstall the operating system and get the disk to a state in which it will at least mount. Then, copy whatever information remains intact to another disk. I would be inclined to replace the drive now, install the failed one in an external enclosure, and attempt to extract whatever information you need from it.

Similar Messages

  • Quick time Pro does not allow me to download files after unlocked.

    In a website there are some audios in QT that I want to download. I right clicked and it gave me the option to download them. After a new screen apperared inviting me to purchase QT Pro. I did it and got the registration code to unlock Pro features.
    Well, now I go to the same website and right clicking on the objects does not work anymore, hence I can not download anything and I just purchased the license to do it.
    Windows Vista.
    Regards,
    Juan

    I think I killed myself. In the QT preferences I had choose Enable kiosk mode in the browser tab, which disables the option to save movies and change preferences from within the browser.
    Now I have another problem, but I will open another ticket. I download, but it only downloads 1K files, but not the whole contents.
    Thanks, Juan

  • Upgrading to Quick time pro does not recognisse my key

    I bought a key from the apple store in the uk and I have had an email with the key. I have tried entering it in system preferences quicktime register by both typing and cutting and pasting but it keeps sayin that it is invalid and does not update. Any ideas ?

    Just as you've posted in the Windows side of these
    Discussions pages you may have purchased a Windows
    key?
    just checked and it does say for OS X but I will now try in the mac side thanks

  • My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    Hy myneck,
    Happy Holidays!  The resource below may provide some steps to try if your MacBook Pro won't start.
    Troubleshooting: My computer won't turn on - Apple Support
    http://support.apple.com/en-us/TS1367
    This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
    You don't hear a startup chime.
    You don't hear any fan or drive noise.
    There is no video on your built-in or external display
    If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
    You may hear a startup chime.
    You may hear fan or drive noise.
    You may see a light from the Sleep LED (if your Mac has one).
    Pressing the Caps Lock key on the keyboard causes it to light. 
    If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter. 
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    I hope this information helps ....
    - Judy

  • New Macbook Pro does not start up after updating...HELP!!!

    Hi,
    My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
    Can somebody please help me?

    You should probably post your question in the MacBook Pro discussions:
    http://discussions.apple.com/category.jspa?categoryID=190

  • Time Machine does not start after external hard drive is connected

    Time Machine does not start after external hard drive is connected

    These are the iCloud storage options: http://www.apple.com/icloud/includes/lightbox-storage.html
    Also bear in mind that:
    1. restoring data over icloud takes time
    2. iCloud is not designed as a replacement to Time Machine.

  • Firefox does not start at all, cpu usage is 100%

    I have tried installing different versions of Firefox, but all of them have the same issue - the browser does not start at all, no error messages, cpu usage is 100% in task manager, so have to shut it down there.

    Hello Zubeyir.
    Hopefully this support article is what you need:
    https://support.mozilla.com/en-US/kb/Firefox+will+not+start
    If you need help installing Firefox, see this:
    http://support.mozilla.com/en-US/kb/Installing+Firefox

  • ITunes does not start at all!!!

    ITunes does not start at all this morning. ( I have a MacBook). I never got this problem before.
    What to do?? I restarted my PC already and nothing happens.

    Sorry, it is starting, but not playing!!!!!!!!

  • My mac pro does not start up because then hard disk is formatted

    My mac pro does not start up because then hard disk is formatted, How can install the operating system.
    regards,
    Tassew

    Did you erase the hard drive yourself? If not, what exactly are you seeing, and what happened immediately prior to you starting to see it?
    Your profile indicates that you are/were running Lion (Mac OS X 10.7.4) on a retina MacBook Pro, so you should be able to hold down command-R at startup to enter recovery mode, and you can reinstall the system from there. But whether or not you need to do something else first depends on your answers to the questions above.

  • Ovi Suite does not start at all

    Hi folks,
    I just finished the installation of the Ovi Suite, but when I dbl-click on it
    or start it via Start - Programs... it does not start at all. There is that error
    message in the event log:
    18/07/2010 20:55:01 (OviSuite) - ERROR   - DAL_Plugin_PCCS,  Thread  10, Line 168,    .\Application\CDalPCCSDevice.cpp, CDalPCCSDevice::getHandle(): DAL failure detected: (102) converted from PCCS error [0x80100023: Device do not support operation] / DA_OpenCA / @ CDalPCCSDevice::getHandle (.\Application\CDalPCCSDevice.cpp:168)
    Anyone with an idea what could be wrong?
    The Nokia PC Suite works e.g. for contact entries (but doesn't seem to work for the latest maps stuff).
    Thanks,
    roveda

     Hi,
    I am not sure this will solve your problem but you can try this once.
    1. Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove program if anything is there.
    2. Delete the files from here If anything is there
    C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite
    C:\Documents and Settings\user\Local Settings\Application Data\Nokia
    C:\Documents and Settings\All Users\Application Data\OviInstallerCache
    3. Restart Computer.
    4. Download and Install latest OviSuite http://europe.nokia.com/support/download-software/nokia-ovi-suite
    5. Restart Computer
    6. now run NOS
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

  • Hello...I´ve just updated my Iphone 4 with 5.1.1. and my Iphone does not start at all....Nothing... Help pls

    Hello...I´ve just updated my Iphone 4 with 5.1.1. and my Iphone does not start at all....Nothing... Help pls

    Have you tried a reset by pressing and holding the sleep/wake button and the home button for 10-15 seconds until the Apple logo appears, ignore the red slider.  Then turn back on. You won't lose any data doing the reset.

  • Tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

    tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

    Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

    I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

    try to restore in itunes bye putting in recovey mode turn the ipod off press the home button and plug in the ipod into the computer. an itunes shuld see it in recovery mode and click restore. and that should do the trick.

  • Quick Time Pro will not launch

    10/04/10: I downloaded Quick Time 7 and purchased a key for Pro. I can open video files with QT7Pro but I cannot launch Quick Time from either the short cut that was created or from the All Programs. The only thing that happens is that the Apple Quick Time logo and name appear in the bottom of the screen as though the program was shrunk down. It will not launch. Right clicking on the icon only provides the capability to "move" "minimuze" or "close." Maximize is grayed out and so is "restore."
    I'd like to use the software I purchased to edit my videos and use some of the other features of Quick Time Pro.
    What could be the issue? HELP.
    Bill N. in Sarasota, Florida

    That sounds a bit like a blown-out QuickTime preference file, Bill.
    First we'll try rebuilding the QuickTime.qtp file, to see if that helps with the launch.
    Quit QuickTime if the button is currently showing in your Taskbar.
    We'll now have to set you up to view hidden files and folders.
    (1) Quit Safari if you have it open
    (2) Go Start > Open.
    (3) In the Organize menu, click Folder and Search Options.
    (4) Click the View tab.
    (5) Make sure that Show hidden files and folders is selected.
    (6) Click OK.
    Now look for a QuickTime folder in one of the following two locations (where "UserAccountName" is the name of the user account in which QuickTime isn't launching correctly):
    C:\Users\UserAccountName\AppData\Local\Apple Computer\QuickTime\
    ... or:
    C:\Users\UserAccountName\AppData\LocalLow\Apple Computer\QuickTime\
    Drag the entire QuickTime folder out onto your Desktop.
    Now launch the QuickTime Player again. (This should rebuild the folder and contained preference files.)
    Does the Player launch properly this time? Or do you still get the same trouble?

  • MacBook pro does not start. How can I back to Mac OS X Lion?

    I have a MacBook Pro. On my MacBook i made three partition, then I installed window 8. After that I started windos and try to delete third partition by Administrator tool from windows operating system. After that my MacBook does not start. How can I back to Mac OS X Lion?
    After that I again install windows 8 from a DVD. Windows start well, but I can not start Mac OS system, may be it was 10.6.  Sever times I tried to install OS X Lion 10.7 thought DVD, I could not. On MacBook I have a lot of important data.
    What can I do. I want to a complete suggestion. Please help me to solve the problem.
    My MacBook Pro model no. A1286.

    You installed Windows improperly the result of which was to wipe out the bootloader for OS X. You can give this a try:
    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the OS X disk icon from which you want to boot.
      5. Click on the arrow button below the icon.
    If you are still unable to boot from the OS X volume then you will need to reinstall OS X:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    This will destroy the Windows bootloader so you cannot boot into Windows. The solution is to remove all the partitions on the drive except the OS X partition, then expand the OS X partition to take up the entire drive.
    Use Boot Camp Assistant in the Utilities folder to create a Windows partition on which you can install Windows. You cannot have any other partitions on the drive besides these two.
    Now given all the above you may be able to install a third-party bootloader that would work with the setup you now have: Boot Runner 1.4.

Maybe you are looking for

  • Lost connection with the cloud

    Curious, if my StorSimple solution loses internet connection and cannot communicate with the cloud, what would the expected behavior be? Will my volumes go offline or will I still have use of my local data? What happens if a cloud snapshot is in prog

  • Access denied (java.io.FilePermission c:\hello.html read

    hi all, i'm trying to run an application in web start which runs otherwise absolutely fine.i have made a tree application .if i press a link in a node it opens another page in jeditor pane which is on the other side of the split pane.every time i try

  • How to create stereo from multitrack library file?

    Hi, I am using some of the sound effects and music form the Library of sounds that comes with STP 3. Many of these are 4 or six tracks, but I would be happier to use the file as a two-track stereo file, since that is much easier to create fades, etc.

  • The disk was not ejected properly

    I have 3 Seagate 1.5TB external USB drives. Two of which I am using with a MacbookPro 17" first gen. Latest snow leopard. The third one I am tethering to a Dell XPS server. The one attached to the Dell works fine. On the MBP17 Every now and again (ra

  • Drop Zone Image Adjustment in iDVD '08

    I use iDVD 6 for making slideshow DVDs of family functions to send out to my other family members. One of the features that I used in every one of my projects was the ability to drag around any image that you place in the Drop Zone that has been auto