Quick Time Update Error Every 2 seconds
Every two seconds the error message from Quick Time comes on stating I need an update. There are two choices: cancel, it freezes for 30 seconds, then the same error messages comes back. When I hit Continue, the next message says it was busy. Then 2 seconds later, the old message wanting me to update, is back. The only way I can get rid of it is to click on the X, it goes away for awhile. It only comes on when I am on ITUNES or APPLE. It does not come on when I am doing other things. Any help out there?
see you other topic where I have replied.
littleshoulders
Similar Messages
-
ITunes not running after Safari and Quick Time update
HELP NEEDED!!After updating to the latest version of Safari and Quick Time, i got this error message the next time I started my computer:
"AppSyncNotifier.exe: The program can't start because CoreCoundation.dll is missing from your computer. Try reinstalling the program to fix this problem."
I tried to open iTunes but I can't. I tried to uninstall so I can reinstall but it I got another error message that said I do not have the rights to uninstall, etc. I am the only user of this computer and I have admin rights. This PC used to run on vista but I recently upgraded to Windows 7(x64) and I encoutered the same problem - i could not uninstall/reinstall iTunes because "I do not have permission"
After upgrading to Windows 7 iTunes was running okay until the Safari and Quick Time update.
I need to sync my iPhone and iPod but without iTunes I can't!!!
PLEASE HELP!!! PLEASE, PLEASE, OH PLEASE!!!!b noir wrote:
What a strange collation of errors. Taken at face value, each of the three suggests a different problem. Working on an Occam's razor sort of principle, that one underlying problem is going to be more likely than a perfect storm of three different problems at once, I think we'd better try checking on troubles with administrative privileges first.
Let's try doing a "run as administrator" on an iTunes uninstall first.
Download and save a fresh copy of the itunes installer to your desktop.
http://www.apple.com/itunes/download/
Now right-click on the iTunes64Setup.exe file you downloaded and select "Run as administrator".
Since you've already got that version of iTunes installed, you should eventually get to a dialog asking you to repair or remove iTunes. Select Remove.
Does that go through without the "Windows Installer" message?
If so, reboot the PC and then try another "Run as administrator" of your iTunes64Setup.exe. Does Apple Application Support get installed for you properly this time?
Thanks again b noir. Unfortunately, this suggestion did not work. When I did what you said, there was no option to "remove". I see the iTunes thing on my control panel-programs window, but it's no longer in the program (x86) folder on the c:/drive. iTunes on my computer is like gum stuck to my shoe. same goes for bonjour. Please be patient some more. Do you have any more suggestions?? I'm planning to get me an iPad but if I can't get iTunes to run properly on my computer I'm having second thoughts about it now.
Thanks! -
Has anyone seen this error before in Encore? Quick Time system error: number = -1 How do you fix it? I get it while burning a DVD. I have the latest version of Encore and the menu I am using was exported from After Effects.
Thanks so much,
HeatherWhen I start Encore I always receive a warning that I do not have Quicktime installed
Since I do not use QT in any way, I ignore the warning and Encore works just fine
I also do not use menus from AE, so there MAY be something to look at
Does Encore work properly if you use one of the built-in menus? -
Is there any one out there that can same me
I have run the i pod and quick time updates but as it nears completetion of the instulation it rolls back and wont let me access either i tunes or quick time
Its driveing me totaly mad HELP PLEASE
Dsee you other topic where I have replied.
littleshoulders -
Quick time player stop every ten minutes?
quick time player stop every ten minutes? my video is on the hdd so any ideas i have a 4gb ram and 10.5.8
before I had a symbol on my dock of quick time, now i don't have it
when i go to system preferences i see quick time there, but i can't put it on dock, it doesn't let me
i watch the videos from www.etvnet.com, and before it would always open in quick time, but now i have to open videos in VLC player.
if i try to find application for quick time among all application on my hard drive, it's not there..
maybe i accidently delete it - i don't know.
The question is- if i deleted it, can it be restored? can i download it again from my Mac Os X Install DVD? -
I just upadated my i tunes to 10.6. but icant open. While open this, there is a error showing for the updation of quick time player to 10.5.5.but i cant update this.my mac version is Mac os x 10.5.8. Pls tell a solution for this
Hi
The error is happening because the vendor invoice has not been posted correctly. Post the invoice using t code F-43, FB60 or MRO. You reverse the old document posted.
Regards
Sanil Bhandari -
Updating JTable every second, want to ignore these events in my listener
I have a JTable that I update every second using
table.getModel().setValueAt(data, row, col);I'm also reacting to when the user clicks on a row in a the table, using a ListSelectionListener:
public class MyTableListener implements ListSelectionListener {
public void valueChanged(ListSelectionEvent e) {
if (e.getValueIsAdjusting()) return;
//do stuff
}And of course I've done this:
table.getSelectionModel.addListSelectionListener(new MyTableListener());Problem is, every time I update the table data it generates an event handled by valueChanged() above. I need to prevent this.
Do I need a customized table model for this?
Thanks!Found the problem: I forgot I was using JXTable, not JTable. Here's my example:
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.table.*;
import java.awt.*;
import org.jdesktop.swingx.*;
public class Test {
JXTable table = null;//change this to JTable to fix
public class MyTableListener implements ListSelectionListener {
public void valueChanged(ListSelectionEvent e) {
System.out.println("event="+e.toString());
public Test()
JFrame frame = new JFrame();
String columns[] = {"one", "two"};
Object data[][] = {{0, 0}, {0, 0}, {0, 0}};
table = new JXTable(data, columns);//change this to JTable to fix
table.getSelectionModel().addListSelectionListener(new MyTableListener());
frame.add(new JScrollPane(table, JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED, JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED),
BorderLayout.CENTER);
startThread();
frame.setVisible(true);
public static void main (String args[]) {
Test test = new Test();
public void startThread()
class RefreshThread extends Thread {
public void run() { try {
while(true) { SwingUtilities.invokeLater(new Runnable() {public void run() {
updateTable();
sleep(1*1000);
} catch (Exception e) {e.printStackTrace();}
RefreshThread rt = new RefreshThread();
rt.start();
public void updateTable()
TableModel model = table.getModel();
try {
for(int row = 0; row < model.getRowCount(); row++)
model.setValueAt(System.currentTimeMillis(), row, 0);
model.setValueAt(System.currentTimeMillis(), row, 1);
} catch (Exception e) {
e.printStackTrace();
}When I change it to a JTable, valueChanged() is not called every time I programmatically update the table.
If it's a JXTable, valueChanged() is called with every update. Annoying!
To compile/run the JXTable version you'll need something like
java -cp swingx-1.0.jar:. TestAs for the events themselves, I added print statements with e.toString() and the events are not distinguishable from user interaction. I wonder if this is a JXTable bug or feature.
Thanks! -
IOS update image every second?
Hello,
I am very new to app development, so apologies for the simple questions.
I have an image on a remote server of which updates every second, now I would like to put that image in a view in an app and have it effectively refresh every second.
Currently its done using javascript and I just reference the image on the remote server with a time stamp on the end of the image like:
image.jpg?Tue Jul 03 2012 10:57:08 GMT+0100 (GMT Daylight Time)
Now I have this working with a local html file and a webview, I just wanted and think it should be possible using native iOS objects like the timer and image view.
Just not sure how to achieve this.
Any help is much appreciated.
ThanksAny one?
-
When I open my iTunes, or whenever I connect my iPods, I get the following Quick Time message:
"Some of your Quick Time software is out of date. You can fix this problem by updating to the latest version."
I click on update and it then gives me this error message:
"Information received from the Quick Time server is invalid. Please try again later."
I have the latest version of Quick Time/Quick Time Player installed (7.4.1)
At times I can click update and it brings me to an update window and I update...but then it still gives me the above errors. Can anyone let me know what I can do to remedy this?
Thanks!
MichaelLaunch the QuickTime Player and go "Edit > Preferences > Register", as per the following screenshot:
... that should get you through to the Register Tab in your QuickTime Control Panel. -
New Front Row, iTunes and Quick Time updater
For user that not aware, there is a new updater for mac which is Front Row 1.3, iTunes 7.0.0 and QuickTime 7.1.3.
For my self, I think the iTunes 7.0.0 is excellent, I found it helpfull to categorize the video and TVshow that I have into a big art image with all the titles next to it instead of showing all as list or as icon in previous iTunes. Not to mention that we can buy a full length dvd movie ($9.99).
I wish the price is the same as songs or regular video ($2.99)...lol
http://www.apple.com/support/downloads/
Check the link above or use your software updater on your apple menu bar.
Good Luck and Enjoy.The Updates
A. iTunes
I like the new iTunes a lot, but my major problem is that my music videos (from iTunes store and other sources) are in my music library! When I am typing or on the internet, iTunes is in mini player mode. All of a sudden a video window pops up and starts playing (what else) a video. I don't like that. The music and video mix transfers over to the iPod also. The main reason I don't like it (on the iPod) is because the audio for a video is different than the original song. An example of this is, Don't Speak -by: No doubt.
B. Front Row
I always liked Front Row and don't really notice any changes to it. It used to be a little slow on the exit, but after the update works like normal again. Therefore, I assume the update for Front Row was for the inner workings of the application. No complaints here.
C. Quick Time
I don't really use Quick Time. I do most of my video watching in iTunes of Front Row because I don't have to pay Apple to watch stuff full screen with those applications. Although, most of my videos are in Quick Time format because it takes anywhere from two (2) too thirty (30) seconds for Front Row to load Windows Media Video files from my external HD. (I guess that IS a complaint for Front Row, but don't tell him. ^_^)
D. iPod v. 1.2
Nice! 1) I can adjust the screen brightness (to conserve battery life). 2) Quick scroll thinggy (I lack the technical jargon to describe it). 3) Screen has a little brightness while it's connected to my computer. 'Nuf said.
E. Summary
I update anything Apple tells me to. But I am having some regrets about iTunes. Nothing that is going to make me uninstall iTunes and reinstall it from a CD (say... the CD that came with my iPod). I have sent a suggestion to Apple, so if you don't like the way things are, I suggest you do the same because posting here will do little to get it fixed. To do it, go to the menu bar while in iTunes and click:
iTunes>Provide iTunes feedback
It should be something similar in Windows, if any of you guys and gals are reading this. Everything else is fine. -
I having trouble reinstalling itunes. I have windows 7 and explorer 9. Keep getting as for as itunes installed and it will not finish installing Quick time.also, keep getting error message "could not find location %appdata%/. What does this mean?
http://www.apple.com/support/itunes/contact/
-
Using duo processor G5, storing video on newly Mac formatted 1TB drive. Imported the first tape from a Canon ZR850 camera with no problem into iMovie HD 6.03. Put in the 2nd tape with a new project name and now continually get an error "Quick Time couldn't parse it -43". I see other errors in the discussion but not this one. I tried removing the backup battery, disconnecting all cables and resetting time, date, etc., but no luck. I then tried to import it through a Canon GL2, but got same error. I tried several other tapes that work perfectly well in the camera but always get the same error. Went through 25 other tapes, so do not believe it is the tapes. Software is OSX 14.4.9 with 6.5 GB RAM. What am I doing wrong? Need help.
Using duo processor G5, storing video on newly Mac
formatted 1TB drive. Imported the first tape from a
Canon ZR850 camera with no problem into iMovie HD
6.03. Put in the 2nd tape with a new project name
and now continually get an error "Quick Time couldn't
parse it -43". I see other errors in the discussion
but not this one. I tried removing the backup
battery, disconnecting all cables and resetting time,
date, etc., but no luck. I then tried to import it
through a Canon GL2, but got same error. I tried
several other tapes that work perfectly well in the
camera but always get the same error. Went through
25 other tapes, so do not believe it is the tapes.
Software is OSX 14.4.9 with 6.5 GB RAM. What am I
doing wrong? Need help.
I did check for plugins but found none.
I used to use iMovie a few years ago an after spending several hours trying to now import the footage remembered that speed compatibility was crucial. My 1 TB drive that I was saving my videos to was running on Firewire 800 speed while my camera was running at Firewire 400 speed. I changed my 1TB drive to run at Firewire 400 speed, and "bingo", it now works.
Thank you however for your suggestions as now I will watch my extra plug-ins as well. -
Received notice of updating to itunes v9 +quick time + safari. Well Safari update appeared to install ok but the itunes and quick time gets to a point where it say it can't change Config.msi\4843932.rbf
Tells me to try again as Administator. Well I am logged in as administrator and it still won't install even when I download it and then try to install from the directory folder.
Runing Windows Vista Home Premium 64 bitPerhaps your ISP is lying about Google's address?
Since there is no Mac version of Chrome, it's unlikely that Google is trying to force you to use that Maybe they're hoping you'll write it?
Try http://74.125.19.99/ and see how that works (that's one of the addresses that Network Utility shows me for www.google.com). -
Can't install Quick Time 7 - Error 1721 problems with windows installer
I had QT 6 PRO and an old version of itunes working fine. I tried to upgrade to Itunes 6. The install failed at the last step of installing QuickTime 7.04.
The error message was "Error 1721.There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." So, no QT, therefore no Itunes.
I did the following:
cleared my temp directory.
made sure I had the latest windows installer (3.1 v2)
removed all traces of itunes and quick time, using Remove Programs, the windows cleanup Utility and manually deleting all files as listed in info article 93976.
I downloaded the standalone QuckTime 7.04 installer, tired to install and I still get the same error.
I now have no quick time 6 or 7 and no itunes, and I have no idea what is wrong with the installer.
I do have access to the install log, and am delighted to reprint it if it will help.
thanks for any help people can provide.
Windows 2000
Windows 2000
Windows 2000HI I am somewhat having the same problem as you with the itunes and QT not fully downloading but i am not computer smart and I am not real sure what you are saying to do. Also it always says "plug-in did not initialize properly" No clue but would appreciate any help from you... Thanks alot
-
Quick Time Gamma Error in some codecs
Hi,
I have discovered an error with some codecs when creating movies with Quick Time Pro.
Movies created using Apple Pro Res 422 and Pal DV have a significant drop in Gamma.
Can anyone confirm this? and how can I notify Apple of this problem?
Also, this problem does not exist if the movie has been created using Final Cut Pro.
CheersUsing duo processor G5, storing video on newly Mac
formatted 1TB drive. Imported the first tape from a
Canon ZR850 camera with no problem into iMovie HD
6.03. Put in the 2nd tape with a new project name
and now continually get an error "Quick Time couldn't
parse it -43". I see other errors in the discussion
but not this one. I tried removing the backup
battery, disconnecting all cables and resetting time,
date, etc., but no luck. I then tried to import it
through a Canon GL2, but got same error. I tried
several other tapes that work perfectly well in the
camera but always get the same error. Went through
25 other tapes, so do not believe it is the tapes.
Software is OSX 14.4.9 with 6.5 GB RAM. What am I
doing wrong? Need help.
I did check for plugins but found none.
I used to use iMovie a few years ago an after spending several hours trying to now import the footage remembered that speed compatibility was crucial. My 1 TB drive that I was saving my videos to was running on Firewire 800 speed while my camera was running at Firewire 400 speed. I changed my 1TB drive to run at Firewire 400 speed, and "bingo", it now works.
Thank you however for your suggestions as now I will watch my extra plug-ins as well.
Maybe you are looking for
-
AP Divs (layers) move when I open my website on different window size.
First of all, this is my first time trying to make a website. I'm doing an assignment for my class and i found it difficult for me to fix. I have spend 4-5 hours researching online but nothing work for me. Well,the problem is the AP Divs (layers) mov
-
Dear Experts .. My client need a following Alert ..... EXP:-- If My Sales Order No 1 quantity is 100 and i delivered 110 base on sales Order No 1 at that time required to send a alert as per assign user... please Provide me the query for the same.
-
How to keep XML file in memory for specified period ?
How to keep XML file in memory for specified period or forever, I have 5 applications running on WebSphere I wants to use XML file for all the applications. I mean when one apllication is not using XML file still I wants to keep it in memory ... Than
-
Localhost not working with firefox 7. How do I get it to work with wampserver
used to be able to access localhost via wampserver but firefox 7 just shows a blank page??? I looked at control panel->internet properties but local host is set as exception. Running XP Pro OS. Chrome 14 works fine with localhost but not firefox 7. I
-
Why when I click the Safari icon in my dock to open Safari it will not open onto my home page?
After downloading the new version of Safari it no longer gives the option to open Safari with your home page. The only options are to open Safari with a blank page or the last page you viewed. In addition, when Im using Safari and I press Command+N t