Quick time will not install/unistall windows vista fatal error

I am unable to install, unistall, or repair quicktime on my computer with vista.
Before fatal error I see install has insufficient privileges to modify this file:
C:\Program Files\Quick Time\Quick Time Read Me.htm
Any suggestions for removing this software to get a clean install would be helpful?

It will not let me uninstall older versons or install new versions.
Do you get error messages? If so what do they say? (Precise text, please.)

Similar Messages

  • Adobe Reader V9.0 will not install on Windows Vista Ultimate SP1

    I have Windows Vista Ultimate Build 6001 and tried to install adobe reader V9.0. The download was fine but when I run the program (AdbeRdr90_en_US.exe) it returns the error:
    "NOSSO (R) has stopped working
    A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available
    Close program"
    So I guess my questions are
    1. Is there a version of adobe reader that will install on windows vista ultimate SP1?
    or
    2. Is there another pdf reader that will work with Vista Ultimate SP1?
    Thanks for any and all assistance!!
    Mark

    I am getting the exact same error:
    I have a brand new HP xw8600 systems with 64 bit Vista Ultimate installed.
    Via google I found a suggestion to turn on user account control.
    I went to control panel > User Account > Turn User Account Control
    checked the box and restarted the system. I ran the install as the administrator. It was a minor improvement. Instead of the error coming up immediately like it was, I got the OS confirmation asking if I wanted to install the program. I got the failure right have selecting "yes"
    Running out of clues... any help?

  • Quick Time will not run on Windows XP PC

    When I try starting Quick Time nothing happens. I have tried opening Quick Time information, and after a short time I get the error message "Error when opening Shell32.dll, control_RunDLL C:\Programs\Quick Time\QTSystem\QuickTime.cpl"
    I have tried uninstalling Quick Time but always got an error, until I removed all files on C:\Programs\Quick Time and the Quick Time files on the System32 folder, like it was suggested on this Forum.
    I then re-installed Quick Time, but I am still getting the same error, and Quick Time wont run.
    Are there any other files I should have deleted before reinstalling Quick Time?
    Kind regards
    Willi Sletten

    When trying to uninstall from Start/Quick Time/Uninstall Quick Time the uninstall would start propperly but then end up in a dialogue box saying that a serious problem had stopped the uninstall.
    When uninstalling from the control panel, I dont think there was an error message, but Quick Time simply wouldnt disappear.

  • Quicktime will not install to Windows Vista "could not open key..."

    I have been trying to install Quicktime for some time.
    Get error message: "Could not open key: UNKNOWN\Components\9c430...... Verify that you have sufficient access to that key, or contact your local support personnel." The installer then rolls back.
    I kept trying and was able to install QT, but it would not open. Error messagesaid something about a "side-by-side" configuration.
    I am the only user/administrator of this pc. I have tried all troubleshooting steps on this website, including uninstalling all Apple software and all remnants.
    I tried all troubleshooting steps. My next step is to re-install Windows.
    HP d5000t Windows Vista Vista Ultimate 64-bit, Intel core2 quad Q9450 @ 2.66GHz 8GB RAM

    Get error message: "Could not open key: UNKNOWN\Components\9c430...... Verify that you have sufficient access to that key, or contact your local support personnel." The installer then rolls back.
    Doublechecking, Alex. Have you tried the procedures from the following post?
    http://discussions.apple.com/thread.jspa?threadID=2475687&tstart=30
    (Although that's about an iTunes install problem on 7 rather than QuickTime install problem on Vista, similar sorts of troubleshooting proicedures can apply in your circumstances too.)

  • IPod will not install on Windows Vista, iTunes is fine?

    Hello,
    I am running Windows Vista Ultimate on 2 computers. One computer connects to my 60GB iPod video just fine, while the other looks for drivers and then fails to find any. I get a window that pops up saying "Insert the disc that came with your iPod" after Windows searches for drivers. Because of this, the iPod does not appear in iTunes, nor does it appear in My Computer. I have tried performing a soft reset on the iPod (Menu/Center combo) which did not work. I have also tried reinstalling iTunes to no avail. This is a brand new Windows installation and I just can't figure out why it won't work. iTunes seems to work just fine in all other respects.
    Thanks,
    Brian
    Message was edited by: kstrike155

    I found these steps here: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1286482&SiteID=1&pageid=4
    Scroll down to the quote from WickedMX.
    Basically, C:\Windows\System32\Driverstore\Repository and look for a folder that starts with usbstor. You will probably have two different versions. Open the folder that is the newest version and then copy the files usbstor.inf and usbstor.PNF. Copy them to the C:\Windows\INF folder. Try installing your device(s) again and it should work like a charm!
    Brian

  • BootCamp will not install in Windows Vista

    I installed Windows Vista on my MBP 17" OSX (10.6.4) with no problems. The problem is now when I go to the Vista side, and try to install BootCamp drivers, I get a message saying "Boot Camp x64 is unsupported on this computer model". Does any one know what is wrong? Does my Vista need updating? Thanks for any help.
    Joey

    Welcome to Apple Support Communities
    Windows 8 also works, but only with compatible Macs > http://support.apple.com/kb/HT5634?viewlocale=en_US&locale=en_US Note that you can also install Windows 8 in non-supported Macs by Apple, but you will not be able to install the Windows support software.
    As you have got Mac OS X Snow Leopard and after checking that your Mac supports Windows 8, you need to download the Windows support software from this website > http://support.apple.com/kb/dl1638

  • Quick time will not install after pro version

    Many years ago I bought Quiktie pro.  I did activate and use and have since lost the activation key.  In error I downloaded and tried to install a free version of quicktie after that.  I now cannot access either.  It will not let me uninstall older versons or install new versions.
    how can i correct this?

    It will not let me uninstall older versons or install new versions.
    Do you get error messages? If so what do they say? (Precise text, please.)

  • ITunes 7.6 will not install on Windows Vista 32-bit (iPod Service problem)

    Basically, my story is near-identical to the one here:
    http://discussions.apple.com/thread.jspa?threadID=1572880&tstart=0
    EXCEPT that after trying EVERYTHING rmurtagh did, I STILL had no success. Specifically, when I try to install iTunes, I get the error "Service 'iPod Service' (iPod Service) failed to start. Verify that you have sufficient privileges to start system services." and when I try to change anything using services.msc, I get the error, "The system cannot find the file specified." PLEASE HELP!!

    when I try to change anything using services.msc, I get the error, "The system cannot find the file specified." PLEASE HELP!!
    Are you getting that if you try to manually restart the iPod Service in Services.msc?
    If so, do you get an error message number with the message? If so, what number is it?

  • Itunes will not launch on Windows Vista no error code

    Itunes will not launch on my computer. I have windows vista. I have uninstalled and downloaded itunes repeatedly. I have also tried all of the troubleshooting tips available on the apple support site. But none of them worked. Quicktimes works fine. It is just itunes. I even opened up task manager to check the processes and itunes appears for about a second in the processes tab then just disappears. I have no idea what to do i have an iphone 3gs and havent updated it for a few months now and cannot sync my iphone without itunes. I Have kaspersky internet protection but i doubt thats the problem because itunes was working fine until i updated it.PLEASE HELPPPPPP!

    Presumably the configuration fails to complete, so every time you start iTunes it has another go.
    As iTunes works normally when you plug in your iPod, you should be able to work round this by creating a new iTunes short cut.
    Go to Program Files\iTunes and right click on iTunes.exe. Select: Send to>>Desktop(create shortcut). If you are lucky you will be able to open iTunes using this short cut.
    However this work around does not fix the underlying problem that WIndows fails to complete configuring iTunes.

  • Itunes will not install on windows vista (error message)

    I just got an ipod and am new to this kind of device. I tried to download the itunes from the apple ipod start page. The itunes download ok except for the itunes application, in which it says it can't install the itunes application then it ends with "error 50". I would have to attempt to download again to re-read the error message to be exact. Any suggestion will help thanks.

    Praise God - I found the solution after hours of work: (1) Uninstall all Apple programs (itunes, Quicktime, Bonjour, .....); (2) Go to "Common Files" and delete all Apple files - this might be difficult for some are locked from you - you may have to change the "Owner" of the file in order to delete it - if that doesn't work "Rename the Apple Follder to something like Apple Old - that's like deleting it.  Then download 10.5 from Apple and away you go - yippee.

  • ITunes 10.7 will not install on Windows Vista

    I just got a new iPhone 5, and so I need to update to iTunes 10.7. But, whenever I attempt to install iTunes onto my computer, after completely downloading everything, it starts the install, but after about a minute of this, it stops installing and says, "Errors occured while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually." I have tried to use its suggestion of just downloading iTunes 10.7. It downloads, but whenever I try to install (Welome to iTunes, Add iTunes shortcut to my desktop and Use iTunes as the default player for audio files checked, etc...), the status bar fills (It says Status: Copying Old Files just before it drops to just Status: ) but just sits there, doing nothing. I am also a little unsure of which file I should be trying to use first (there's AppleApplicationSupport.msi, AppleMobileDevieSupport64.msi, iTunes64.msi, and SetupAdmin.exe). I have not tried uninstalling iTunes and completely reinstalling it yet, however, mainly because I have nowhere to store my library in the meantime. I am not doing this as an administrator, but I did try the exact same thing on my administrator account, and it did not work. Any help is appreciated. Thanks!

    To clarify, I already have iTunes 10.6. Also, I just checked back on the iTunes installer (the manual one) and it now says: "iTunes Installer Completed
    The installer encountered errors before iTuens could be configured.
    Errors occurred during installation. Your system has not been modified.
    Please run the installer again, or click Finish to exit."

  • TS3772 Quick time will not install on my PC. I keep getting a win.32 dll error message...any thoughts?

    Well, alrighty then, I'll ask my IT guy Monday...

    Many thanks.
    That's suggesting that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/quicktime/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • ITunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times.

    iTunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times. Please help.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • ITunes 11.1.4 will not install properly - windows 8.1, 64 bit.  My only way to recover is to restore my system.  iTunes 11.1.3.8 functions properly.  When will Apply provide a workable update?

    iTunes 11.1.4 will not install properly - windows 8.1, 64 bit.  The only way I have found to recover is to restore my system.  I have unistalled/reintalled iTunes two times.  No success.  iTunes 11.1.3.8 functions properly (following system restore).  When is Apply expected to provide a workable update?

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see.  The reason is that Quick Time will not support the video.  What can I do to be able to get these videos?

    I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see.  The reason is that Quick Time will not support the video.  What can I do to be able to get these videos?  I have all ready download Adobe Flash Player and installed it but it has not effect.

    Get Flip4Mac (for Windows Media videos):
    http://dynamic.telestream.net/downloads/download-flip4macwmv.asp?prodid=flip4mac wmv
    And Perian for everything else:
    http://perian.org/
    You should be able to play most videos with QuickTime player once both are installed.

Maybe you are looking for

  • Objects of EJB in flex

    Hello. i want know if is possible that i can use Java Objects in my flex application using Blaze-Ds. I have all my business logic in Objects inside EJBs. Then, i need use it in a new flex application. I was read that i can do it, but i don't know how

  • Invoice Reversal in Closed Period

    Hello everyone,                          Can an invoice, whose posting period is closed be reversed?Also, in the transaction MR8M( for invoice reversal) under the "reason for reversal" field, what is the difference between "invoice reversal" and "act

  • Collision detection issues - help please?

    Hi guys, I'm currently developing my own shoot em'up game where I'm having  problems setting up the collision detention for bullets hitting/damaging  the enemy, I'm not sure why it isn't working. I'm got four classes for  this game so far which commu

  • How do i uninstall software not listed anyplace?

    I've tried to install hp solution center which can't locate hpzmsi01.exe file and did a level 4 uninstall which left hp photosmart installed hp update installed,  with absolutely no way to uninstall, windows 7 64bit c7280. the windows 7 disk that cam

  • Do you have to uninstall elements 11 before installing elements 12

    Do you havr to uninstall elements 11 before installing elements 12? Dave