Quick Time won't delete!

I tryed to remove Quick Time from my computer but it says it can't and I need it off of my computer. Can anyone help?

I tryed to remove Quick Time from my computer but it says it can't.
what's the precise text of the error message you're getting when you try to uninstall QuickTime? (include error message numbers if you're getting any.)

Similar Messages

I am not able to install quick time after i deleted it accidentaly

I am not able to install quick time, after when i deleted it accidentaly. Actually it was installing but i am not able to see the icon in applications

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful it won't install normally.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Quick time won't play in safari

Quick Time Player won't open in Safari 6.0.

I found a workaround - You have to restart Safari in 32 bit mode. It will play QT files. Of course this just means that it may make it unstable, but where were we before 64 bit anyway.
I think those Apple nerds should get this sorted out - its been several years since people have posted the same problem, and I am not sure what motivates them, but it would help to get someone to explain the process or at least find a solution.

Quick time won't uninstall

My itunes was working fine one day and the next day I get the following message. *itunes cannot run because it detects a problem with quick time*. when I checked help it says uninstall quick time and reinstall. I attempted to uninstall quick time and got the following message - *The windows installer service could not be accessed. This can occure if you are running windows in safe mode, or if the windows installer is not correctly installed*. HELP!! what do I do now?

hi,
I was able to remove the programs (msicuu2.exe ) and reinstall quick time and iTunes.
However I was unable to get the programs to work.
I got the following messages after I started each program
QuickTimePlayer has encountered a problem and needs to close. We are sorry for the inconvenience.
EventType: BEX     P1 : QuickTimePlayer.exe     P2 : 7.69.80.9
P3 :4cf444ff     P4 :QuickTimePlayer.dll     P5 :7.69.80.9     P6 : 4cf444e1
P7 : 00005b6d     P8 : c0000409     P9 : 0000000
iTunes has encountered aproblem and needs to close. We are sorryfor the inconvenience.
AppName:itunes.exe               AppVer: 10.3.1.55   ModName: unknown
ModVer: 0.0.0.0        Offset: 0000b7a4
I tried removing and reinstalling the programs but it did not correct the problems
I also tried repaair mode but got the same results.
Thanks
John

Quick time won't open

I have the latest MacBook 2,1 (1 GB) and have the latest updates installed. Anytime something is opened that requires Quick time, it comes up with a question mark inside the logo. What gives? I'm not a wizard, just a basic user.

Same thing happens to me. It happens with firefox, aol and even safari. Anything that works with quicktime gives me the quicktime logo with a question mark in it. In the preferences I tried to click on all the mime settings but the bottom one reverts back to a dash and I can't open swf files. I have to use windows media player for those. I thought that that was the problem but after the update that I installed yesterday it happens on all the above mentioned browsers. I go on the bellsouth homepage to do a sudoku puzzle every day. I can't in none of the browsers anymore. Very frustrating not being able to watch clips/ videos of any kind. I can imagine that we see a fix from Apple within the next week or two.
Cheers.

Quick time won't uninstall or open

Quick time will not open
I get error 2095 if i try to open the program
It will not install Qt or itunes updates.
How can I reinstall qt & itunes. Everything I tried would not work.
It report that QT and bourjour will not uninstall and then the updat stopped
My OS is windows xp
thanks

hi,
I was able to remove the programs (msicuu2.exe ) and reinstall quick time and iTunes.
However I was unable to get the programs to work.
I got the following messages after I started each program
QuickTimePlayer has encountered a problem and needs to close. We are sorry for the inconvenience.
EventType: BEX     P1 : QuickTimePlayer.exe     P2 : 7.69.80.9
P3 :4cf444ff     P4 :QuickTimePlayer.dll     P5 :7.69.80.9     P6 : 4cf444e1
P7 : 00005b6d     P8 : c0000409     P9 : 0000000
iTunes has encountered aproblem and needs to close. We are sorryfor the inconvenience.
AppName:itunes.exe               AppVer: 10.3.1.55   ModName: unknown
ModVer: 0.0.0.0        Offset: 0000b7a4
I tried removing and reinstalling the programs but it did not correct the problems
I also tried repaair mode but got the same results.
Thanks
John

What if quick time won't down load onto computer

Having trouble, Just bought the ipod touch and when i attempt to down load itunes it pops up with an error message that says quick time did not install completely and that itunes requires quick time. that is all the information is gives.
please help if you are able.

when i attempt to down load itunes it pops up with an error message that says quick time did not install completely and that itunes requires quick time.
Let's try a standalone QuickTime.msi install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the QuickTime.msi to do a standalone QuickTime install.
Does it install properly for you? If so, does an iTunes install go through properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Reloaded Quick Time Won't Accept Registration Data

Does anyone know how to go about getting Quick Time to accept the registration data for previously-purchased Pro and MP2 Playback capabilities -- reloaded on the same machine as before, after an XP SP3 "Bootlock"-induced reformat/rebuild ??
Many thanks,
Lee Hunt

Excellent !!
A thousand thanks for THIS tidbit. That's all it took to get QT Pro registered and running. The plugin, I fear, may be a horse of a different color however.
THAT appears to have been an online install -- both from the website and from the fact that I don't have a copy of it in my library. I spent an incredibly frustrating half hour with the support [[sic]] crew who -- even WITH the Apple Part Number -- had NO idea what I was talking about and just bounced me around from one to another until they could drop me into the "we're closed now" recording.
I wonder if anyone might know the filespec and registry settings for the plugin. Perhaps with those, I might be able to shoehorn the pig in with files recovered from the backup set rather than having to pop for a new license. I'll GREATLY appreciate any help along those lines.
Many thanks,
Lee Hunt

Quick Time won't work with my Digital Camera

Quick Time 4 is part of my Camedia software for Olympus Digital Camera D490
we have 3 computers
1 Win98se laptop
2 Win XP 2003 edition
3 Win XP only 6 months old
it used to work in no 2, and works in no. 1 & 3 . an icon "My Camera comes up" and you are supposed to click on it and it drops down to a Dcim (this works on no. 2, but on no. 1 it drops to 100 olympus which does the same,but on computer no 2. it does not drop down and i get error messages it says
A: maske sure camera is connected and turned on (it is both)
B:check port setting (i did, even tried automatic port setting ( i do not know how to change port setting)
C: lower communication speed (i don't know how/where to do this)
D:Camera's Mode Dial is set to outer connection mode(i do not see a Mode Dial/do not think it has one.
Question, how can i test Serial Port on no.2 computer?? (it used to work on no.2 computer)
ClybeB1. if not more info, Please ask

Dear Jacumba. i am aware of the camera age,etc. it worked on this computer previously. it works on another XP computer and a 98SE laptop.
i don't think it is a Camera Problem or software . i just installed it on 98se laptop recently..............NUST be some setting in this XP Computer
I called Olumpus on phone 3 times, got 3 different people, they can't help
THANKS FOR REPLY

Quick time won't work

Dear user, please help me! I have been succesfully using iTunes and QuickTime player until yesterday when I changed Windows Home Edition to XP professional. Downloaded a new version of iTunes from this website and tried to install it and the installation went as everything was ok. And now when trying to open iTunes it always gives a message about Error.. and offers to send report QuickTime player is not opening too and even when i try to uninstal it (add/remove programms) it shows "fatal error occured". Could someone please help me?
best regards,
Maksims

when i want to open some movie on QT, the erro message appears.. and an offer to send report?
hmmm. that's rarer than the "itunes has encountered a problem ..." message.
let's try getting a crash log to the Apple Engineers for a look.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the QuickTime crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing
... also mention explicitly that you're sending through a QuickTime crash log, perhaps in the title of the email. (Roy typically gets itunes crash logs via this channel, so that might help ward off any potential confusion.)

Quick Time Won't Open in Vista

Quicktime Quicktime Pro won't open in Vista:
I can't open Quicktime by starting the application. After starting Quicktime a button appears in the Vista system toolbar, but no window opens. If I mouse over the Quicktime button in the toolbar, a preview window appears, but I can't open the window. If I right click, I have the option to close, minimize, or move the quicktime window, but the maximize option is dimmed. If I run Task Manager, Quicktime is running. I can not "switch to" the window, but I can force the application to quit.
The same issue occuredfter a new install of Quicktime, before Quicktime Pro was installed and since Pro was installed. To Register Pro I could only find Quicktime in the 32 Bit Control Panel while the system is running 64 bit.
I have followed the guidelines on the apple web page http://support.apple.com/kb/HT1926 uninstall iTunes and Quickitme, re-install and then re-install Quicktime only.

When I click on it, it flashes a message reading, "Please Install Apple Application Support."
Apple Application Support is needed to run QuickTime. There's some information on the relationship between the two programs in the following user tip:
[QuickTime for Windows and Apple Application Support|http://discussions.apple.com/thread.jspa?threadID=2353984]
Is Apple Applications Support currently showing as being installed in your Add or Remove Programs Control panel?

Quick time won't load

I had QT and itunes working fine, but for some reason they both stoped. Tried downloading them but it would not install because I have a "newer version" which I obviously don't. I have deleted every trace downloaded various clean up programs but it still insists I have this new version of quicktime? any ideas

If you don't see quicktime in the programs to un-install check this out I had a problem loading quicktime.
http://discussions.apple.com/thread.jspa?threadID=793558&tstart=0<<br>
Windows XP

Quick time won't stream anymore

I've been watching quicktime streaming videos before (more specifically the Apple Events) and now I can't. I tried opening the link in both FireFox and Safari, and nothing. I deleted quicktime preferences in my library (under my user account) and still nothing. Any suggestions? I even updated my quicktime to the latest one via software update.
PowerBook G4 Mac OS X (10.4.7)

I had a similar problem, I think after upgrading to QT7.1.2:
I use iMovie HD '05 to make movies and post them on my .Mac homepage. For the last few months I made movies, posted them using the "black frameless - large" template. When visiting the site, the movie would stream, and would start to play within 10 seconds (on a broadband connection). I did a software update to QT 7.1.2 at the end of August, then to 7.1.3 when it came out a week or so later. Yesterday I posted a very similar movie in size (around 20mb), but when visiting the site it loads the entire movie before it starts to play, taking over three minutes.
Anyone else having this problem? I tried "re-sharing" from iMovie using the smaller template, tried sharing it using the QT "expert settings" and checking the "fast start" options, to no avail.
If anyone has a solution I would love to hear it.

Quick time won't open h264

Hi everyone except jim cook! I have already been to the qt side and no help there, so maybe somebody here can help. I encoded a file from compressor 3. I used h264 and when it was done, I dbl, clkd to open in qt and it closed right away. So I tried to open it again and it still closes qt right away. Everything was fine until the update from qt 7.3 to 7.4 and then 7.5. We try to keep updated with the apps so these children don't *****, but I haven't the slightest idea why there is a prob with qt? And I suppose nobody has had this prob? We are not on leopard so that is the only thing I can think of, but when I encode anything from compressor 2 from my house they play, Any suggestions?
Thanks-B

Well, kinda been there done that scenario. Still no help. I really do not want to reinstall on EVERY machine as we do not have clones. But thanks capn'! Oh! Even when I select it in finder with the preview open it relaunches finder. So weird
-B
Message was edited by: Beefykieth

Quick time won't play mp4 rendered in After Effects.

Since I upgrade to Mavericks i've been unable to play mp4 videos rendered using After Effects cs5. After rendering i get a file icon with the quicktime logo instead if the usual thumbnail with the play button; first indication that the clip might not play. Then when i try to play it i get the error message: "The document “MVI_7772.mp4” could not be opened. This media may be damaged." What do i do?
Any help would be very much appreciated.
Thanks3e

I would not expect CS5 apps to be very compatible with Mavericks. You could try to render the file out in After Effects as a Quicktime MOV file using H264 and see if that works for you. If it does you can change the extension from mov to mp4.

Quick Time won't delete!

Similar Messages

Maybe you are looking for