Quick transaction for checking avalable budget for purchase requisition.
Hallo to everyone,
I'm in the engieering and design dept., I'm responsable for creating purchase requisition.
Once that the PR is created, how I can check in a quick view if there is a money according to the budget in the WBS element where PR is creted?
I use this version of SAP
thank you,
Massimo
Hi Cafagna,
You can also use SAP standard report S_ALR_87013558 Budget/Actual/Commitmt/Rem.Plan/Assg., which will be very use full for actual, commitment and remaining budget, please see below snapshot.
Regards
Javed
Similar Messages
-
Do not want Budget check & Commitment value for purchase Requisition
Hi Experts,
I hope you all are doing well.
My client's requirement is that at the time of Creation of Purchase Requisition there should be no budget check against WBS element and also Commitment value should not be for Purchase Requisition.
Please suggest.
Thanks & RegardsHi Gokul,
Thanks for ur quick reply.
I have done changes in tolerence limit (activated it for PO only).
Now i created 1 Project PR of more than value of budget (system didnt check the Budget against WBS) but when i am trying to create PO with reference to same PR, system is giving error of budget. That is OK for me.
Now my requirement is to not take PR value as commitment in my reports, i want only PO value in Commitment column of repport.
I have read all 3 notes suggested by you. Can u tell me whcih one should i implement to stop PR value as commitment in reports.
Thanks & Regards -
Transaction for purchase order history
please tell me the transaction for purchase order history
Hi,
There is no standard T.code for checking the PO history,
Go to ME23N then check at header level there tab called status which shows the ordered quantity,delivered quantity,invoiced quantity,
If the delivered quantity & invoiced quantity is equal to less than ordered quantity then it shows the details like whether GR is done or not & invoice is made or not. This data @ overall PO level.
You can check the details of this above data @ item level there is tab called Purchase order history which shows the details of GR & invoice itme by item.
Same data you can check in the table EKBE through T.code SE11 or SE16.
Regards
Ravi Shankar. -
Budget Approver for Purchase Requisition
Hi,
In MM setup for purchase requisition, 4 levels has been setup for approving based on amount. The person who will approve is configured to be determined based on user exit (value - 9) in TCode OMGQ.
My question here is where is this user exit and how can we know to whom this PR will actually reach for approval.
Please help me out.
Regards,
Binay AgarwalThat you have to check in the Workflow settings based on the organization defined in PPOME
User exit M06B0001
you ca check the logic of user exit in SMOD
enter the above user eixt and display the component logic -
Release strategy for purchase requisition does not kick in
Hi Gurus!
I've been struggling with this issue for some weeks now.
I have set up the release strategy configuration for purchase requisitions with classifications.
However, if I create a purchase requisition the release functionality is not taken into account by the system.
See below some more information regarding my configuration:
1. I've created a new characteristic "REL_PR_GROUP". Status: released, Multiple values, Number of Chars 3, 7 values (TR1, TR2, TR3....TR7), Table name: CEBAN, Field name: EKGRP, Procedure for value assignment set to not ready for input.
2. I've created a new class: "REL_PR_ANPC". Class type 032, Status: released, Same classification: do not check, Char: "REL_PR_GROUP"
3. I have one release group "T1", Rel. object 1, OverReqRel is marked, Class: "REL_PR_ANPC"
4. I have 5 release codes. Grp: T1, Code: 01....05
5. I have 2 release indicators:
"R = Released", Rel. for ordering is marked, Changeabil: 4, Value chgs. 100,0
"X = Blocked", Changeabil: 4, Value chgs. 100,0
6. I have 1 release strategy:
"T1 with Grp T1"
- one release group, 01 Manager
- release prerequisites not applicable because of only one release group
- release status, nothing marked = blocked, 01 marked = released
- classification, purchasing group is TR1 or TR2 or TR3 or TR4 or TR5 or TR6 or TR7
I intentionally kept the configuration as simple as possible so I can try to get it working first.
Now if I create a purchase requisition for an item with release group T1, I would expect the release strategy to be activated. However, this is not the case. I don't see the "release status" tab in the PR, and if I try to relase via ME54 the system says the PR is not relevant for release.
Could you please assist in getting this working?Hi,
Have you checked in CL30/CL30N if your release strategy is derived successfully?
See section 3 of Note 365604. A small section of it:
You can use transaction CL30 search for an object using the data
of the purchase requisition/purchase order. Here, it is important
that the object search determines exactly one strategy. If this
is not the case, this indicates that there are overlapping
strategies in the system or that the release strategies in
Customizing do not correspond with those from transaction CL24.
See the previous point. If the object search returns more than
one result, the system subsequently determines an incorrect
release strategy or no release strategy at all.
If it is derived successfully, next, check the user exit EXIT_SAPLEBND_001 as per Note 371667:
The following assignment statement has to exist within activated SAP
enhancements M06B0002 (include zxm06u13) and M06B0005 (include zxm06u31)
for purchase requisitions:
E_CEBAN = I_CEBAN.
Regards,
Purnima. -
SAP workflow for purchase requisition and purchase order
Hello Sap Workflow,
Can you please help me on building workflow for purchase requisition and purchase order with the necessary screen shots ?
your quick response will be greatly appreciated.
Thanks in AdvanceHi,
Please check http://help.sap.com .
http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92761846f311d189470000e829fbbd/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92775546f311d189470000e829fbbd/frameset.htm
Configuration guides are available in SAP Solution Manager.
Regards,
Masa -
Can't use Overall Release for Purchase Requisitions
I have two groups, AA and ZZ. Each group has it's own Class.
Group AA uses Cost Center Class (CN) (uses Characteristics Cost Center and Line Amount)
Group ZZ uses Order Class (OC) (uses Characteristic Order)
I have built one and only one Release Strategy for each of these Groups. These Strategies both work successfully when I select the other group to be the group for Overall Release. That is, if I set ZZ to be for Overall Release, then create a requisition, the release strategy for Group AA is applied successfully. However, if I modify the req the strategy for ZZ, does not get applied.
The opposite is true. When AA is set to be for Overall release, then ZZ works. However, if I modify the req, then AA's release strategy does not get applied.
Again, both strategies work correctly when the other Group is set to be the one to use for Overall Release. However, neither strategy works if its group is set to be the one for Overall Release.
What am I missing? I only have two classes, two groups, and two release strategies.SAP Standard system allows only 8 levels of release codes.If client requirement is more than 8 then for excess release codes customisation is done by the technical team (Abapers).Lets take an example of 15 release levels required for a client according to his Business needs then in this case initial 7 codes are customised and remaining 8 release codes are configured in the system.
Release procedure is of two types
Release Procedure without classification
This procedure is applicable only for Purchase Requisitions.
Here PR is released Item by Item only.
Release Procedure with classification
This procedure is applicable to PR,RFQ,Service Entry sheet,RFQ,PO,Contract and scheduling agreements.
Item by Item and Header level releases can be configured
For PR - both item by item and Header level release can be configured
For external purchasing documents - Release is possible only at Header level.
Step 1:
Create Characteristics
In this step we need to create characteristics - conditions to be satisfied for triggering Release startegy.For example client has asked to set release strategy based on 3 inputs.Combination of value, Plant and Purchasing group
1) Total value of PR more than Rs 50,000
create characteristic as "Release_PR_total_value" in transaction code CT04.
Tab - Basic data " Data type --- CURR currency format", "Decimal places - eg. 2 " and "currency eg. INR or USD"
Tab -values key in > 50000 INR
Tab - Additional Data- Table Name "CEBAN" and Field Name "GSWRT"
Tab - Restrictions - class type - 032 - Release strategy
2) Plant
Create characteristic "Release_PR_plant" in transaction code CT04.
Tab - Basic data - Data type - CHAR; Number of chars - 4
Tab - Values - Key in all the plants for which you are required to configure release proc. eg. 1000,2000,3000
Tab - Additional data - Table name CEBAN and Field Name is WERKS.
3) Purchaisng Group
Create characteristic "Release_PR_PurchasingGroup" in TCode CT04
Tab - Basic data - Data Type - char, Number of chars eg. 3
Tab - values - Key in all the purchasing Groups for which Release proc. is to be configured as required by Client.
Tab - Addnl Data - Table Name CEKKO and field name - EKGRP
Step 2:
Define class in transaction code CL02
Menu path SPRO>Materials Mgmt>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>Edit classes
Here we assign all the above created Characteristics to a CLASS so that a release strategy to be triggered when all the conditions are met.
Create a new class with free choice of names as "PR_Release_proc" in transaction code CL02.*Key in the class name and select class type as 032 - RELEASE STRATEGY then click on symbol create to enter all the details as mentioned below.
Tab - Basic data - Enter description as "PR_Release-Proc",
status- Released, Same classification - check the push button - Warning Message
Tab- CHAR Enter above created 3 characteristics
1.Release_PR_total_value
2.Release_PR_plant
3.Release_PR_PurchasingGroup
step3:
Menu path is
SPRO>Materials Mgmt>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>set up procedure with classification>
here define
1.Release Groups
Release group 01 is used for Purchase requisitions and 02 for Purchase orders.
Here assign class "PR_Release_proc" against release code "01"
check "OvRelPReq" indicator for over all release (All line items )of document in one shot else it will be released line item wise.
2.Release codes
Release codes are assigned to Release groups, in Workflow these release codes are tagged to users' SAP IDs through which they will be able to approve or reject a PR in SBWP(Inbox in SAP Business workplace.
PRs are released by users in transaction code ME54N.
Eg
Type of user - Level - Release code
PR creator - clerk or Business user -
Approver - Supervisor - R1
Approver - Project Lead - R2
Approver - Asst. Manager - R3
Approver - HOD/General Manager - R4
Release codes R1 to R5 are assigned to corresponding users.Manager R4 can only approve the PR if prior approvals till R3 are completed else not in ideal situation.
For detailed info please refer
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
3. Release Indicator:
Release indicators show the release status of a Purchase Requisition.
For detailed info please refer SAP Help official site
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
4.Release Pre requisites:
These define the order in which individuals or departments release the PR in sequence.
3.Release strategies
Create a new release startegy eg ."A1" or "U1" , write its description PR release for value >1 lakh
Now select release codes according to the Chart of Authority set by your client.
Eg.
Release startegy " A1 - PR release for value >1 lakh"
R1 - Supervisor
R2- Project Lead
R3- Asst. Manager
R4- General Manager
Now click on" Release Prerequisites "push button and check all the boxes in ascending order.Save the document
click on "Release statuses" push button, check release statuses then click on "Continue" push button.
In third push button you can maintain CLASSIFICATION data or later you can directly mainatain in transaction code CL20N for this strategy.
Classification data for example
1. Value - > 100000
2. Plant - 1000,2000,3000 etc
3. Purchasing groups - 101,102,103 etc
By clicking on "Release Simulation" push button you can check whether release is getting affected for configured release codes or not.
In this way you can configure all the required Release startegies.
Now create a PR in T code ME51N with the above conditions then a new tab will appear in PR creation screen at the time of check.Save the document and this can be released by respective users in TCode ME54N.
Tcode - ME54N - For Individual Release
Tcode - ME55 - For Collective Release
For detailed info please visit SAP HELP website
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
Regards,
Indranil -
User exit/BADI for Purchase requisition through release of Process order
Hi ,
i need to add some text to the Pur Req.
The Pur Req will be created THROUGH the release of PROCESS order. Please let me know any exits are available for the same.
regardsHi
Check the following Exits and BADI for Pur Requisition
Enhancement
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
Business Add-in
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Custome
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_PURCHDOC_POSTED Purchasing Document Posted
SMOD_MRFLB001 Control Items for Contract Release Order
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
Reward points if useful
Regards
Anji -
No selectable items exist for purchase requisition l_banfn
Hi,
While creating PO with ref to PR getting the below error :
no selectable items exist for purchase requisition l'banf .
Checked if the PO is created, its not created,.
checked if the item is blocked/cancelled/deleted. Nothing is set.
PR looks fine. Dont know if any authorization data is missing?Check the status tab in ME53N whether all the qty in PR are already used up
Or
Check the line item in PR whether it is deleted
Edited by: Karthik on Jul 20, 2011 12:37 PM -
FM for Purchase requisition status
Hi,
Is there any FM for Purchase requisition status.
Do let me know.
Regards,
SPHi,
Check this FM, hope this will solve ur problem.
'BAPI_ACC_PURCHASE_REQUI_CHEC' -
BADI for Customer's own screen for Purchase Requisition.
Hi All,
I have a requirement where I need to create a BADI implementation for creating addition screens in the Purchase Requisition Transaction (ME51n/ME52n/ME53n).
I know there are User exits but we donu2019t want to implement them. Now in case of PO there is a standard SAP given BADI -> ME_GUI_PO_CUST for Customeru2019s own screen but as far as my understanding goes there are no such BADIs for Purchase Requisition.
Could anyone please advice if I can create a Custom BADI similar to ME_GUI_PO_CUST for PR for adding the screen and throw some light on it like how can this be achieved?
Thanks,
AmeeshaThanks Darek for replying back and the BADI ME_BAPI_PR_CUST looks helpful but could you please help me in understanding how can i create my own custom screens within ME51N / ME52N / ME53N tcode using the BADI , ME_BAPI_PR_CUST.
For example in PO, we have the BADI ME_GUI_PO_CUST, with several methods like SUBSCRIBE and others which we can make use of for creating screen exits but what in the case of PR fpr BADI ME_BAPI_PR_CUST. i couldn't find any sample code for implementing this.
Any help is greatly appreciated.
Thanks,
Ameesha -
Custom Event for Purchase Requisition Create, Change & Delete
Hello Experts,
I want to create a custom event which triggers on Purchase Requisition Create, SAP provide's standard event's for purchase requisition release but not for create.
What are all the steps and how to create a new event.
Thanks in Adavance,
Sandhya.Hi Sandhya,
may i know the reason why you are trying to create custom methods.
You have business object BUS2009(for PR line item wise release) and BUS2105(for PR overall release).
Both those business object have events RELEASESTEPCREATED (for PR creation) and SIGNIFICANTLYCHANGED(For PR change).
Even then if you want to create custom events, create a subtype of the standard business object, then click on events, and then select create. Now create your Z-events, say ZCREATED (For creation), ZCHANGED (for changed) and ZDELETED (for deleted). Now select each event, click on edit -> Change release status -> object type component -> to be implemented. Follow the same for all the events. Then select each event, click on edit -> Change release status -> object type component -> to be released.
Now click on your custom object, click on edit -> Change release status -> object type component -> to be implemented.Then click on your custom object, click on edit -> Change release status -> object type component -> to be released.
After this in SWEC tcode, click on new entries. Select change document object as BANF, business object as say ZBUS2105 and event as ZCREATED. make sure radio button on create is checked.
Similary create entries for ZCHANGED event and ZDELETED.
Select on change and on delete radio button for event ZCHANGED and ZDELETED event respectively.
let me know if you have any queries.
Regards,
Raj -
"No selectable item exist for purchase requisition I_Banfn"
Dear all
While creating Po system show a massage"no selectable item exist for purchase requisition I_Banfn"
Please help.Hi,
PR status in status TAB in item details You have following:
Processing status :Specifies the current processing status of the purchase requisition: IS PO Created or RFQ created etc...
Block ID:The requester (PR creator)can block a requisition item to prevent it from being converted to a purchase order
Processing State: Released or not Released
You need check above & then act to unblock if blocked , release it if it is not released or check if this PR already converted to PO.
Follow the steps to create PO from PR:
Enter ME21N T.Code
Click u201CDocument Overview onu201D
Click u201CSelection Variantu201D and Select Purchase requisition and double click & Execute
Now you will PR Numbers,Select your PR Number , you will have line items(10,20,30 etc..) , you will have all the details of PR (like item category,material , quanitites for each line items) and Now click u201CAdoptu201D and u will see all PR related copy to PO.
Regards,
Biju K -
Header Noe for purchase requisition
Hi,
Can anyone help me for maintaining the header note as default,so that the note will come whenever someone enters into ME51N.
How to maintain the header note for purchase requisition as default for a client.
Thanks in Advance.hi,
Check this BADI...may be useful to you
ME_REQ_HEADER_TEXT "Copy Header Text: Enjoy Purchase Requisition
Thanks & Regards -
Is it possible Line level approval in AME for purchasing requisition?
hi
is it possible Line level approval in AME for purchasing requisition ?
so that send each line to separate approver ?If using AME, it should be possible. Check AME Guide for POs for details. Let me know if you run into issues.
Thanks
Shree -
Is it possible Line level approval for purchasing requisition in AME?
hi
is it possible Line level approval for purchasing requisition in AME?
so that send each line to separate approver ?If using AME, it should be possible. Check AME Guide for POs for details. Let me know if you run into issues.
Thanks
Shree
Maybe you are looking for
-
790FX-GD70 won't POST - 3 beeps & diagnostic LED "2e"
Hi, After a second or two of rapidly displaying various hex values, the POST_LED stops at "2e" (not documented in manual; can't find on MSI support site) and the system issues 3 beeps (1 long and 2 short, also not documented in manual or online for
-
APEX Interactive Report not shown complete on production system
Hello, I have a problem with my Apex 4.1.1 application on customers production server. On our development system (Oracle 11.2.0.3) the Apex IR with the query down below delivers 1.500 rows and the page loading is finished after 3 seconds. On our cust
-
Windows not showing up in Startup Disk
Just updated a 15" Retina to 10.8.3 and also ran the SMC 1.1 update. Now my bootcamp windows partition does not show up in the Startup Disk any more. I can see it in the Finder and I can reboot and hold down option key to boot into Windows, but for s
-
Fuego BPM object mapping in PAPI
I am currently using ALBPM 5.7 version. My ALBPM process is using one Fuego BPM Objects as instance variables. I need to access the process via PAPI. What is the equivalent Java object type for typical Fuego BPM objects, per say that has few attribut
-
Hey Y'all, I have been reading the boards about Slideshows and it seems that many recommend FotoMagico. I played with it for a few hours and decided it was pretty good and now I have purchased it. My question is, what timeline preset should I use for