Quick Viewer/SQ01

I need to fetch data i.e. data extraction from production using quick viewer.
I need to fetch from the below tables
LFA1, LFB1, LFBK, LFM1, BNKA, ADR6
1st four tables are have LIFNR field common, I am able to map all 6 tables. But when I map last two tables data is not retrieved may be bacuse I am using partial primary keys. Please advise how to fetch data from all the 4 tables.

You need to change the Join Conditions from Inner Join to Left Outer Join to get all the data. If you Don't use the Proper joins you will not get the correct/full data.

Similar Messages

How to associate a T-CODE to an infoset or a quick view? sq01/sq02

How to associate a T-CODE to an infoset or a quick view? sq01/sq02

Hi , Try out these steps :
Pre requisites.
1. User group name where the Infoset is assigned to
2. Query name.
Steps.
1. Go to SE93
2. Put your transaction name.
3. Click on Create.
4. Input a short text.
5. Select "Transaction with Parameters" radio button.
6. Enter "START_REPORT" in transaction field under "Default values for" tab.
7. Check "Skip Initial Screen"
8. Check "Inherit GUI attributes".
9. Under Default Values "Name of Screen field"
a) D_SREPOVARI-REPORTTYPE Value: AQ
b) D_SREPOVARI-REPORT Value: (Usergroup Name)
c) D_SREPOVARI-EXTDREPORT Value: (Query Name)
10. Save.
Have a look at this thread - [Start Report and Tcode|http://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_forums_rm&query=start_report++%27aq%27&adv=false&sortby=cm_rnd_rankvalue]
Regards,
Lokesh

What are the logical database source (SQVI) should i use for quick viewer

Dear expert,
Would like to seek for your help, how to use (SQVI) quick viewer/SAP query to generate the listing of and can I use SQVI -quick viewer and select the data source as logical database source to generate in order to generate the listing of GL account number,GL account descrition , tax category,posting without tax allowed column in the query by company?
Between, what are the data source should I use for logical database to generate the query with listing of GL account number,GL account descrition , tax category,posting without tax allowed column in the query by company?
Please help.
Many Thanks.
Regards,
Karen

Hi,
Thank you for the prompt reply, what I would like the query to generate is the master data GL listing for GL account,GL description,Tax category, posting without tax allowed column where i use BRF as the data source for logical database to generate the quick viewver but the BRF data source do not have the GL description.
How I can join table/join query or what are the data source should i use so that i can able to generate the query with GL master data listing by company code by display GL account,GL description,Tax category, posting without tax allowed?
Between,do you have any reference/link/document on the how to use the SQV1?
Also, what the difference between SQV1 and SQ01 ?
And also what are the sap query,inforset query,quick viewer mean for and what are the difference between them also when should i use sap query,inforset query,quick viewer to generate the query?
Please help.
Many thanks.
KH

Convert from Quick Viewer to Infoset.

Can I convert from Quick Viewer (SQVI) to Infoset/Query (SQ02/SQ01)?
Thanks.
Best regards.
Gustavo.

If you have created a QuickView and you want to convert it to an SAP Query
report, simply follow these three quick steps:
1. Navigate to the main screen of the SAP Query (SQ01).
2. Follow the menu path Queries > Convert QuickViews.
3. Select your QuickView from the drop-down box and press the Enter button.
You are prompted to type a name for the query; press Enter again to convert
the QuickView.
Here is the document which says how to convert QickVier to SAP Query.
http://searchsap.techtarget.com/searchSAP/downloads/Teach_yourself_SAP_C20.pdf
Regds
Manohar

Quick view in sqvi

Dear gurus,
i have created one quick view for scheduling agreement where in all pending delivery schedules for a perticuler period will appear . but i am not getting the table for OBMNG ( open quantity ).
if this is the result of deduction from scheduled qty to GR qty. & is set in the programme.
then how to take it in the quick view
inamdar

Inamdar,
I don't believe this functionality is available in SQVI. For this, you would have to create a regular (not quickview) query in SQ01. Regular queries support the creation of local fields, which can be calculations. See online help at
http://help.sap.com/erp2005_ehp_04/helpdata/EN/d2/cb4186455611d189710000e8322d00/frameset.htm
Rgds,
DB49

Quick View to SAP query

Hi ,
I have a Quick view, hwo do i convert to sap query?.
System : 4.7
Rgds,
Mano Sri

Hi Ravi.......
U can create view in SE11......
U can Create Query in SQ01...........but for that first u hav to create infoset in SQ02 which will connect the tables......then create Query in SQ01......there.........you specify the infoset that you want to use......
Regards,
Debjani......

Quick Viewer

Hi Guys,
how can i get <b>company code specific data(customer master data) using quick viewer</b>?
as i know we dont get any selection criteria.
it it is not possible can somebody explain how can i extract all customer master data particular to a company code?(not from SE16)
Thanks
anil
Message was edited by:
anil maguluri

dear anil
SQVI is used to convert a Quick View into a query.
Quick Viewer:
The Quick Viewer allows you to define reports without having to program yourself. The Quick
Viewer is especially useful for new users and occasional use.
Quick Viewer is a tool for generating reports. SAP Query offers the user a whole range of options for defining reports. SAP Query also supports different kinds of reports such as basic lists, statistics, and ranked lists. Quick Viewer, on the other hand, is a tool that allows even relatively inexperienced users to create basic lists.
Quick View definitions are user-dependent. You can transfer a Quick View into SAP Query in order to make reports, for example, accessible to additional users, or to use the other functions available in SAP Query.
The following is a comparison of Quick Views and queries:
Quick Views possess the same functional attributes as queries. However, only basic lists may be defined with Quick Views.
In contrast to queries, no user group assignment is necessary with Quick Views. Each user has his/her own personal list of Quick Views. Quick Views cannot be exchanged between users. Quick Views may, however, be converted to queries and then be made available to other users in a specific user group.
Info Sets are not required for Quick View definition. Whenever you define a Quick View, you can specify its data source explicitly. Tables, database views, table joins, logical databases, and even Info Sets, can all serve as data sources for a Quick View. You can only use additional tables and additional fields if you use an Info Set as a data source.
The Quick Viewer uses various controls. Certain hardware and software requirements must also be fulfilled before you can use the Quick Viewer.
To define a Quick View, you select certain fields according to your data source that determine the structure of your report. The report can be executed in basis mode with standard layout or may be edited using drag and drop and the other toolbox functions available in WYSIWYG mode.
Reports created using the Quick Viewer may also be passed to external programs (Excel, for example).
Call the Quick Viewer using System -> Services -> Quick Viewer (or transaction SQVI).
Enter the name of the Quick View. Quick View names can contain a maximum of 14 characters.
Choose Create.
Enter a title for the Quick View and remarks, if you think they are relevant.
If you do not want to base your list on a table, use the possible entries pushbutton in the Data source field to select another data source. You can choose logical databases or Info Sets. In addition, you may also create table joins. For further information, see Selecting a Data Source.
Choose Basis mode if you want to create the list directly with no list design. Choose Layout mode if you want to define the layout of your list yourself.
SQVI Table Quick viewer Used to created quick client dependent reports
Probably the easiest and most flexible way to do this is thru one of the ABAP query transactions.
Transaction SQVI can do this and it has a very good help function that explains how it works... the drawback is that it is only for one user.
You can play around with it and see if it meets your needs...
The query results will come back in an ALV Grid or Excel... you can select what fields are returned, and have a selection screen to enter the search criteria.
To allow any user to run a query, then you can create an Infoset with transaction SQ02 (you define what fields the user will get in their results, and what fields will appear on the selection screen), then create a multi user query using transaction SQ01 and the infoset you created in SQ02. One of the basis people can then create a transaction from your sq01 query, and that transaction can then be moved into production.
SQVI and SQ02/SQ01 are far more powerful than SE16 as they allow you to do table joins. SQ02 also allows you to create computed fields.
Got the above info from a link
Also see this
http://supplychain.ittoolbox.com/groups/groups.asp?v=sap-r3-log-mm&i=783523
rewards if it helps
siva

Quick Viewer share to all users

Hi,
I have 2 questions on Quick Viewer.
1. How can I access other people developed query? I cant access even though it has been developed by some other person.
2. How can I share the access with others if the query is not intended to access public?
>> From quick viewer as starting point ...
Thanks.
Marks will be rewarded.

@1:    - go to transaction SQ02 -> Settings: tick the checkbox DISPLAY SYSTEM OBJECTS
         - then go back to SQ01, now you have in the STANDARD AREA user groups with the quickviews of
            each user
@2:    use in SQVI the menu quickview -> additioal functions-> generate programm and display program name and make a transaktion out of the generated program
regards
Markus
award some points if useful

Quick Viewer SQVI: how to switch to Technical Field Names on select screen?

Hi all,
I have created in SQ01 a Quick view and want to see the technical field names (and not the descriptions) on the selection screen.
In SE16 in the selection screen you go to
-> Settings
-> User parameters
unter 'keywords' you find FIELD NAME / LABEL and you can choose.
But in SQVI there is not that option.
Only in the creation of the query you can 'switch between techniucal name and long text'.
However if you execute and come to the selection screen then there is only the long text....
Who knows????
Thanks in advance,
Thomas

I also tried with different options but it looks like SAP does not have option to display technical fields in output, however we can see technical names while creating query.

How to share Queries / Quick Views?

How can I share Quick Views / Queries generated by SQ01 among users. I can assign queries to user groups, but I did not find a way to do so for quick views.
Is this the right way to share quick views / queries -> assign them to a user group?
Any hint is appreciated.
Regards KB

Thanks for the hint:
And the queries I would share by assigning them to a user group. Is this the right way to do it?
I need to share queries among some users and clients (client number/mandt).
Regards
KB

Cancelled PO in Quick View

Hello,
Can anyone suggest /guide how to delete records for cancelled PO in quick view.
Thanks
Parag

Hi
The trick is that you can play around with the options / types / personalize options of quick views that you see.
You have options in it deselect / un select certain types of items.
Play around with them to select what you want in the selection criteria. Save it and replace the existing one with what you want.

How can I quickly view pdf files like I can do with Windows Picture and Fax viewer for jpg files?

How can I quickly view pdf files like I can do with Windows Picture and Fax viewer for jpg files? I need to look at several thousand PDF files. It takes too long to open each one individually. The only thing I could think of is combining them into large groups and then using the Navigation index. But I like the way windows Picture and Fax Viewer does it because you can keep the files separate. Combining PDFs causes loss of individual file names. That would be a problem since I do need to have the individual file names.

Windows Picture and Fax Viewer is a DLL and is started via a rundll32.exe call and can't be set as an application to handle images in Firefox 3 and later versions.
Try to set Windows Picture and Fax Viewer as the default viewer in Windows, then it should be listed automatically in the Mozilla Firefox Browse dialog.
*http://www.winhelponline.com/articles/115/1/Windows-Picture-and-Fax-Viewer-as-the-default-viewer-in-Mozilla-Firefox.html
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

What happened to Quick View?

In the iTunes store it seems that Quick View is no longer available. Also, when you check out any album in the Just Added area, when you are finished and exit out of that particular album it will not take you back to the exact page where you started. In other words, you have to start your next search all over from the very beginning. What has happened to the great and easy-to-use navigation feature iTunes once had? Searching for music has become very difficult.

It's just annoying, he really spent some time on it.
Hopefully in an update.

Quick View in itunes

I must have something set up wrong
When in the Itunes store I go to the "reccomendations for you" and try to quick view an album
I always get the pop up window saying "Quick view is currently unavailable for this item" I get this message for every item.
Perhaps someone had the same problem and found a solution for this because it used to work just fine.

I have the same issue! I used all the time and it quit working about a month ago. Tagging this discussion for hopes of a solution!

Numbers don't show german umlaut but quick view does

I do have a problem opening CSV files in Numbers.
I have a shared folder with VirtualBox. The virtual HD is formatted in FAT32. With Windows I created a CSV file which contains german umlauts like ÄÖÜ.
When I open the CSV with the "quick view" (press space when file is selected in finder, the CSV is displayed as a nice Table and all Umlauts are OK.
When I double click the CSV file to open it in Numbers, the Umlauts are not displayed. Opening in Text Edit is the same result, no Umlauts.
ö = ^
ß = fl
ü = ¸
ä = ‰
I think this is an encoding problem, but why is "quick view" displaying it correct. I'm confused.
Thanks for any help.

Hello
I cannot find any encoding settings for opening files in Numbers 09.
A simple and obvious solution would be to save CSV file in UTF-8 in FAT32 volume in VirtualBox if possible.
One other method is to copy the CSV file to HFS+ volume and set its extended attributes to specify its text encoding. This method is only changing the metadata of the file and so is less intrusive than to convert the data itself to different text encoding. When text encoding extended attribute is properly set, Numbers 09 (and TextEdit.app set to use "Automatic" encoding option in opening files) will open it in the specified text encoding.
The following AppleScript script might help to set the extended attributes (OSX 10.5 or later only). Recipe is as follows.
A1) Open /Applications/Utilities/AppleScript Editor.app, copy the code of set_latin1_xattr.applescript listed below and save it as application (bundle) in the folder where target CSV files reside.
A2) Double click the saved applet and it will set the com.apple.TextEncoding extended attribute of the *.csv and *.txt files in the same folder where the applet resides to Latin 1 when they are recognised as 'ISO-8859 text' by file(1) command.
-- set_latin1_xattr.applescript
_main()
on _main()
    set p2m to (path to me)'s POSIX path
    if p2m ends with "/" then set p2m to p2m's text 1 thru -2
    set sh to "
# set current directory to parent directory of script (or die)
cd \"${0%/*}\" || exit 1
# add com.apple.TextEnncoding xattr for Latin-1
# for *.csv and *.txt files, of which file info contains 'ISO-8859 text', in current directory
for f in *.{csv,txt}
do
    if [[ $(file \"$f\") =~ 'ISO-8859 text' ]]
    then
        xattr -w com.apple.TextEncoding \"WINDOWS-1252;$((0x0500))\" \"$f\"
    fi
done
    do shell script "/bin/bash -c " & sh's quoted form & " " & p2m's quoted form
end _main
Another method is to convert the text encoding itself as you have already done using TextEdit.app.
The following AppleScript might help to convert text encoding from latin-1 to utf-8 in bulk. Recipe is basically the same as the above.
B1) Open /Applications/Utilities/AppleScript Editor.app, copy the code of convert_latin1_to_utf8.applescript listed below and save it as application (bundle) in the folder where target CSV files reside.
B2) Double click the saved applet and it will convert the text encoding of the *.csv and *.txt files in the same folder where the applet resides to UTF-8 when they are recognised as 'ISO-8859 text' by file(1) command. Also it sets the extended attribute for text encoding accordingly.
-- convert_latin1_to_utf8.applescript
_main()
on _main()
    set p2m to (path to me)'s POSIX path
    if p2m ends with "/" then set p2m to p2m's text 1 thru -2
    set sh to "
# set current directory to parent directory of script (or die)
cd \"${0%/*}\" || exit 1
# make temporary directory
temp=$(mktemp -d /tmp/\"${0##*/}\".XXXXXX) || exit 1
# convert text encoding from ISO-8859-1 to UTF-8
# for *.csv and *.txt files, of which file info contains 'ISO-8859 text', in current directory
for f in *.{csv,txt}
do
    if [[ $(file \"$f\") =~ 'ISO-8859 text' ]]
    then
        iconv -f ISO-8859-1 -t UTF-8 \"$f\" > \"$temp/$f\" \\
        && xattr -w com.apple.TextEncoding \"UTF-8;$((0x08000100))\" \"$temp/$f\" \\
        && mv -f \"$temp/$f\" \"$f\"
    fi
done
# clean up temporary directory
rm -rf \"$temp\"
    do shell script "/bin/bash -c " & sh's quoted form & " " & p2m's quoted form
end _main
Note that the extended attribute is not supported in FAT32 and so the above methods only work in HFS+ formatted volume.
Scripts are briefly tested with Numbers 2.0.5 under OSX 10.5.8 and 10.6.5. Please make sure you have backup CSV files before applying the above scripts.
Good luck,
H

Quick Viewer/SQ01

Similar Messages

Maybe you are looking for