Quick way to convert many files from AIFF to MP3

I have a large collection of CDs and until now, did not have a computer or an iPod to hold all of them. I borrowed a friends external hard drive and copied all of the cd files onto it. I just recently bought a MacBook Pro, and loaded all of the files into my iTunes... Only to find that since I couldn't import the cds into an iTunes in the first place, only the file names transferred over- not the album/artist info. So I have been spending a lot of time adding that info manually. I also just realized that all of the files were in AIFF format, and not MP3 so they are taking up a large amount of space on my itunes. I have not yet gotten a better iPod, so they are just sitting in my iTunes right now. I was hoping there is an easy way to convert them all to MP3 without having duplicates in my iTunes to weed through. I have 4000+ songs, so that would take a while.
also, if there is some magical way to get the artist/album info without having to type it all in, that would be great too.
thanks in advance.

Pemmyk wrote:
I was hoping there is an easy way to convert them all to MP3
Yes highlight the ones you want to convert and follow the instructions in this support document: http://support.apple.com/kb/HT1550
without having duplicates in my iTunes to weed through. I have 4000+ songs, so that would take a while.
There is no weeding necessary. After the converion completes, sort by Date Added and all the new ones will be together.

Similar Messages

Any way to convert a file from Movie playlist to TV show playlist?

Hi, I just uploaded a few tv shows from my computer to itunes, but unfortunately, the tv show i uploaded went to the Movies playlist.
I cannot drag the file over to tv show no matter how hard i try. It stays on Movies.
Is there any way to change this?
Thanks!

You can right click on the title, and choose GET INFO, there's a tab there, i think it's OPTION and choose TV SHOW (default is on MOVIES)

Is there a quick way to convert mpg files for use in imovie?

Prefferable a way I can select a group of files to import into imovie, which is not much of a hassle to do.
thanks

Get MPEG Streamclip (which is free).
It has a batch mode so you can do a lot of clips at a time and let it run.
If they are MPEG2 files you may also need the Apple QuickTIme MPEG2 Playback COmponent ($20). MPEG Streamclip should tell you if you need it.
I usually use FILE/EXPORT TO QUICKTIME/Apple Intermediate Codec, but you could also use DV, h,264, etc.
Drag your completed clips to a new folder in Movies/iMovie Events. (Or to multiple folders if you want to make multiple events)
Or if you want to store them on an external drive which is formatted as Mac OS Extended (journaled), drag them to a folder inside a Folder at the top level called iMovie Events.
Start iMovie and it should recognize the new folders as new events and it will start generating thumbnails.

Is there a quick way to convert Albums to Projects?

Due to bringing in legacy organizing from iView MediaPro into Aperture years ago... I have an organizational structure consisting of few top level Projects containing many Albums. I now realize I should have few top level Folders containing many Projects (which contain Albums when necessary).
So the question is... is there a quick way to convert an Album to a Project? If I have to create a new Project for each Album I have by hand... this will take forever as I have hundreds of Albums.
Thanks!

Doing it manually is what I'm trying to avoid... I have a LOT of albums. I started trying to script it but I am trying to piece it together with my uber limited applescript knowledge... here's what I've got:
tell application "Aperture 3"
set imgSel to (get selection)
if imgSel is {} then
error "Please select an image."
else
set pName to name of parent of item 1 of imgSel
set pID to id of parent of item 1 of imgSel
set cID to id of parent of parent of item 1 of imgSel
tell library "Aperture Library"
make new project with properties {name:pName}
repeat with i from 1 to count of imgSel
move item i of imgSel to project (pName)
end repeat
end tell
end if
end tell
It's ghetto (there's some stuff I need to comment out that wasn't used) and it seemed to work in the test library I setup, but when I went back there were some weird thumbnail issues so I'm scared... not to mention it doesn't seem to work in the actual library for some reason. It won't create the new project. Weird.
Message was edited by: skivvie

Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in

Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in german "Fehler bei der Anmeldung"). I hope have explained the issue on the right way with my bad english. Do you have a solution for it?? Best regards, Marcus Wenk

yes, you are right. it is the adobe reader via exportPDF. but it should be the acrobat. it was written on the internetpage...

Converting music files from Windows Media Player to iTunes

There has got to be an easier way to convert these files...does anyone have any suggestions? It is only reading them as text files and they aren't. They are straight from my cd collections.

iTunes will not accept Window Media player tracks that are protected. If you imported them off your own CDs, did you check the option to apply protection to them? If so, your only choice is to re-rip those CDs.
Patrick

What is the proper way to convert a VHD from dynamic to basic without losing data?

Hi,
What is the proper way to convert a VHD from dynamic to basic without losing data?
Our VM is running Windows Server 2008 R2 SP1
Thanks in advanced

Hi efebo,
"After you convert a basic disk to a dynamic disk, you cannot change the dynamic volumes back to partitions. Instead, you must delete all dynamic volumes on the disk and then use the
Convert To Basic Disk command. If you want to keep your data, you must first back it up or move it to another volume. "
Please refer to following link:
http://technet.microsoft.com/en-us/library/cc731274.aspx
You can try to backup the dynamic volume via Windows Server Backup then restore it to a new basic VHD file ( the space is recommended to be larger than or equal to the old one ) .
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I need to find a way to convert .WMA files to .MP3 format on Lion

I need to find a way to convert .WMA files to .MP3 format; with Snow Leopard, I could do that using iTunes, but since upgrading to Lion, I can convert the files to a .mov format in Quick Time, but cannot move the file into iTunes in order to convert it to .MP3. If you can suggest a work-around or an app that will work with Lion, would be much appreciated.

Haven't used it myself, but worth a look http://www.macupdate.com/app/mac/27103/all2mp3
Stefan

Is there a way to open Excell file from the server and display in the UI and save it back on to the

Hello there,
Is there a way to open Excell file from the server and display in the UI and save it back on to the server? (like showing xell file as a datagrid - add rows, columns etc.)

Hi Mike,
Welcome you to the forum.
You may try:
SELECT * FROM MyDBNameHere.dbo.OUSR T0
Thanks,
Gordon

How can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

how can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

Turns out the answer to that question changes if you ask it more than 4 times, so ask it again....
The answer depends on the type of video files you want to convert. If they are DRM protected commercial videos, no help can be given here. Google.

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder.

Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

Is there any way to get the files from other computer ?

Hai all,
I have 2 computers connected. I know the IP address of other computer. Is there any way to get the files from other computer. (for e.g. I want to get the files from specific folder. In Java netwroking is it possible? (Any programs)
regards,
Namanc

Bro Take it easy.
Think you need to send a Image file named ("abc.gif")
now develop a server using ServerSocket and connect it in local IP and any PORT
For example i think ur server is connected in "localhost" and 9000 port.
Now make ur server educated using some commands.
For example:
FileName: <File Name String>
[Means new file is sending by connected client]
FileSize: <File size long or int value>
[ So that ur server can determind about the total length of sender file]
DataModeOpen
[Now your client will send its image data, this command means your client software is sending data]
fjadlkfjaofaijojfwoeiurfodkjflsajlfksa
l23j4lj23lkjlasjfoq23j4rokjelfkjasldkf
2o3j4lk2j3ljslakdjf2l3j4 l23kjlk23k4j
DataModeClose
[Means file sending finished]
Close
[Means your client connection is closed]
Now develop a client supporting this command.
For example(Server):
String getFileName=null;
long getFileSize=0;
public handleCommand(String getCmd) {
    if(getCmd.startsWith("FileName")) {
            String[] splitData=getCmd.split(":");
            this.getFileName=   splitData[1];
            outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("FileSize")) {
            String[] splitData=getCmd.split(":");
            this.getFileSize=Long.parseLong(splitData[1]);
            outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("DataModeOpen")) {
           //data mode open so receive data
          receiveData();
          outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("DataModeClose")) {
          //close client socket
         getClientSocket.close();
}For client:
DataInputStream dataIn=null;
BufferedOutputStream bout=null;
public sendFile(bytes[] getBytes) {
        //if ok found then do other or show error message
    if(sendCmd("FileName:"+getFileName)) {
        if(sendCmd("FileSize:"+getFileSize)) {
            if(sendCmd("DataModeOpen")) {
               bout.write(getBytes);
            } else {
               showError(3);
        } else {
               showError(2);
   } else {
        showError(1);
}i think it will help u

When I converted a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text. How can I solve this problem?

When I tried to convert a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text. How do I solve this problem? I don't know how to change it from Read Only.

Dear Sara
Thank you very much for sending the converted file. Yes, I am able to edit it - that will be very useful to me and I appreciate your help.
Referring to your previous message when you said you'd converted via Acrobat and not Acrobat.com, I'm converting via Acrobat.com because that's the only option that is shown (how do I convert via Acrobat? - perhaps that would be more successful). I'm using the Export PDF website, and the OCR is enabled to "Recognize text in English UK". However, I've just tried converting a different LPA pdf form, this time for Health & Welfare https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/245571/LPA114_He alth_welfare_LPA.pdf and again I have the same problem as before. I've altered it from "Read only" and thought I'd then be able to enter text, but "Drawing Tools" is shown in the pane and I'm unable to enter anything onto the form - everything appears to be in images. Also, the lettering on the heading of' page 1 has become jumbled, with the word "Public" overlaying the word "Guardian." Any suggestions as to what it is I'm doing wrong would be welcome - I don't like to be beaten!
Regards,
Judith.

How to convert a file from pdf to txt in java

hi,
in my project ,I want to convert a file from pdf to txt using java api. If anyone
have any idea about it plz help me.

Google has several ideas. :)

Want to convert a file from Windows XL to PDF

Want to convert a file from Windows XL to a PDF can this be don?

Search!
http://lmgtfy.com/?q=convert+xl+file+to+pdf

Quick way to convert many files from AIFF to MP3

Similar Messages

Maybe you are looking for