Quickcam Web not working

Hello together!
Since qc-usb was replaced with gspca I have troubles with my Webcam. It's a Quickcam Web (more precisely: LEGO cam) 046d:0850 and it used to work with qc-usb. It's also listed as a supported one in the gspca files.
It is correctly recognized when plugged in:
usb 2-1: new full speed USB device using ohci_hcd and address 3
usb 2-1: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
gspca: main v2.7.0 registered
STV06xx: Probing for a stv06xx device
gspca: probing 046d:0850
STV06xx: Configuring camera
STV06xx: vv6410 sensor detected
STV06xx: Initializing camera
gspca: probe ok
STV06xx: Probing for a stv06xx device
gspca: probing 046d:0850
STV06xx: Probing for a stv06xx device
gspca: probing 046d:0850
usbcore: registered new interface driver STV06xx
STV06xx: registered
usbcore: registered new interface driver snd-usb-audio
When I try to cat from the video device I get this:
cat: /dev/video: Input/output error
dmesg now reports:
gspca: usb_submit_urb alt 1 err -28
gspca: no transfer endpoint found
Other applications (mplayer, amsn, etc.) behave similar.
My first tests on a 2.6.29 kernel months ago resulted in a Kernel Panic, with 2.6.32 it's not working "only"...
Regards,
Sven

Thank you very much. Your link (and another google search which taught me about guvcview) helped me.
After I unplugged my USB keyboard and mouse (two different devices) from my computer (no hub!) the cam started to work (note: I'm using a laptop). I'm very surprised by this behavior.
Now I need to find a solution for this bandwidth problem, because without full keyboard and mouse chatting is not very comfortable (and that's the sole purpose of this cam)
EDIT: Well... unplugging one of the two devices (keyboard, mouse) seems to be sufficient... perhaps I should learn to live without a real mouse (that's easier than without a real keyboard)
Regards,
Sven
Last edited by PascalDragon (2009-12-31 17:18:02)

Similar Messages

Save for web not working in Photoshop element 6

Save for web not working in Photoshop element 6. I am using Mac os x version 10.5.8 Anyone know how to fix that please tell me. Thanks

I just copy the preferences from my computer for you to see what are shown about adobe
file:///Users/raymondsmith/Library/Preferences/Adobe/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Illustrator%20CS2%20Settings/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Paths
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Settings/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Paths
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Settings /
file:///Users/raymondsmith/Library/Preferences/AdobeUM/
file:///Users/raymondsmith/Library/Preferences/AppleWorks/
file:///Users/raymondsmith/Library/Preferences/ByHost/
file:///Users/raymondsmith/Library/Preferences/CD%20Info.cidb
file:///Users/raymondsmith/Library/Preferences/CDDB%20Preferences
file:///Users/raymondsmith/Library/Preferences/cfx%23FBSxPfw
file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.90.sh.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Pro7.0.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.sh.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Uninstaller.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Adobe%20Help%20Viewer.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.ami.installer.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.bridge2.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.mediabrowser.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.PhotoshopElements.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader_ppc_9.0.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader.plist
file:///Users/raymondsmith/Library/Preferences/com.aol.aim.plist

Eagle eyes web not working iOS 6

i updated my iphone 3g to ios 6, i have a problem because eagle eyes web not working, appear message that push video is not compatible

I would do as what Diavovex suggested:
Settings >>> General >>> Reset >>> Reset all Settings.
Once you have completed this, ipad will reboot, connect again to your Wi-Fi and then try to Reset imessage again. Just make sure your Apple ID and password are ok ...... try log in to Apple Store and if this is not an issue then I don't see why imessage cannot connect?
Azim

Share Web Not working

I click the start button, becomes gray and says startig web sharing but it never starts. What can be wrong? If I close the control panel and open it again, it remains off.
Thanks for your suggestions.

Hi: This is the message I've got after restarting
/usr/sbin/apachectl restart: httpd not running, trying to start
Processing config directory: /private/etc/httpd/users/*.conf
Processing config file: /private/etc/httpd/users/+entropy-php.conf
fopen: No such file or directory
httpd: could not open document config file /private/etc/httpd/users/+entropy-php.conf
/usr/sbin/apachectl restart: httpd could not be started
The other question: I've never use it before. I was trying to test a PHP script locally and it did not work (first time I was trying to do so). Then I found out that I had to start the apache services and used this app (http://www.entropy.ch/software/macosx/php/) with not results. Then I tried to go back and I've deleted the folder they ask if I want to get rid of it but I could not delete the +entropy-php.conf file.
Diego

Photoshop CS6 Save for Web not working

I am using photoshop CS6 (cloud) on Mac (10.7.5) and when I use the Save For Web > save, i got the following popup :
---- Adobe Save For Web Error ----
Could not complete this operation. An unknown operating system error has occurred.
I have been using CS6 for months and it worked fine yesterday before shutting done. Today morning at startup it was not working anymore.
I have tried to uninstalled and reinstalled photoshop, clear my presets, shut down/started up, repair disk, repair permissions,... without succes.
The save for web function still works in CS5.
Any help will be very much appreciated,
Raphaël K.

I found the solution (took forever to consolidate all the answers) for OS X 10.9 + Maverick. Finally!
1. Change permissions (as AOTPR says) to your User/Library/Preferences file so that your admin and user (the one you are using) has read + write permissions within the Get Info pane (command+I). You may have to add them with the sign.
2. Delete Adobe save for web 12.0 Prefs & Adobe save for web 13.0 Prefs files within the User/ Library/ Preferences folder. These may be hidden for some people, so when in a finder window, hold Option(alt) and click Go from the main top menu (keep holding Option/Alt) and click Library — the full Preferences folder should open for you.
3. Change the view when in Save for web pane in PS. If you have it in Cover Flow — it won't work. Change it to another view like List or Columns view.
Presto! Works for me on Maverick.
Thank god. It took forever to get this cleared up!!
If you have any questions, email me [email protected]

Save for web not working on mac

Hi Everyone,
I am giving photoshop elements 8 a trial but can't get the save for web to work. When I click File -> Save for web it does nothing?
Does anyone have any suggestions why this would be the case?
I downloaded the trial today for Mac and have installed it twice with no joy.
Cheers
Luke

Terri_F wrote:
To do this, press and hold in the cmd + opt key and go through the menu and click File<Save For Web. A dialog will come up saying something like "Are you sure you want to erase all of the preferences for Save For Web". Click "Yes" to the dialog that comes up.
I just tried this. No dialog box appeared.
I am loading the software onto my MacBook Pro now, which is running 10.6. Hopefully I can use it on that machine, though I do a majority of my work on this one.
eta: The Save for Web dialog is appearing on my MacBook Pro.
Of course, now I can't get the Loop checkbox to toggle, or the Frame Delay to change for the animated GIF I am trying to create. *sigh* Now I shall start searching the forum for a solution to that problem.
OK, I just found this:
Unfortunately this is broken in PSE 6 and PSE 8. You can tab into the frame delay box if you start above it someplace on that side of the screen, and it appears to let you change the rate, but your choice doesn't really affect the actual frame rate. The only workaround is to duplicate frame layers that you want to stay onscreen longer (so it will be changing just as fast, but not visibly).
Seriously? This is the MAIN REASON I bought PSE. To do animated GIFs. I can't believe that Adobe isn't bothering to fix this problem.

"Save for Web" not working (again)

I have reinstalled Photoshop CC and removed all "save for Web" preference files.
I receive the following error message:
"The operation could not be completed. A file or directory already exists with the same name"
Which file or directory?
Wouldn't it ask if I want to "overwrite" the file?
Running
Photoshop CC 14.2.1 x64
Mac OSX 10.9.2
Before you roll your eyes and say "Watch the video" about removing preferences files - I have done all of that, in addition to reinstalling Photoshop CC twice.
It is the second time this has happened to me in a year. Now Illustrator is also misbehaving when I try to "Save for Web".
"Save for Web" is a really important feature for me - I am a freelancer doing graphics and web.
Anybody have any Ideas? Is this a common problem? Is Adobe working on it? Is it a Mavericks problem?
Thanks...
Nachricht geändert durch arlenesey12

Okay for anybody who is interested - the ONLY thing left for me to do - and what I have done - is to create a new User account and copy all my files to the new account.
I did this by copying the files first to the "shared" folder in Users. - not simply by moving them but by copying them - Important!
There was a suggestion somewhere that you could delete the User with the problem, create a user with the same name and then reincorporate the old user data into the new account - this did not work for me.
Removing all the various Preferences mentioned in 3-4 similar posts from people with the same problem did not help.
I even contacted Adobe Customer Assistance (chat), they took over my screen and after trying the above and more, the only thing left that worked was for them to create a new User test account. This worked.
But what a botherto move everything! iTunes, iPhoto, Mail - they all have to be moved in a certain way (do your research).
Another tip - to be safe, I have kept the old account and maintained it as "Administrator" - and changed the password.
My new User (Where I moved my files to and will work out of) is not an Administrator account, and has a totally different password.
I don't believe I was "hacked" - I think a log somewhere got corrupted.

Save for web not working for .PNG?

When I slice up a .psd file and then go file > save for web and select to save the images as .png it does not work for some reason. No matter what I select it only uses jpeg. I am using Photoshop CS2.
Any suggestions?

As Zeno said, file format selection is per slice, not a global override. Select al lslices, then pick the PNG options.
Mylenium

My T-Mobile Mobile Web not working on MacBookPro

Yodels.
I have a new T-Mobile Rocket 3.0 4G webstick and it will not work on my 13" MacBookPro running Snow Leopard 10.6.8
When I start the software up, it seems to stall, run, stall, run, and then I have to force quit. When I go to Preferences, it says it's connected to the interent with an IPv4 address using DCHP. However, using any browser, I get a error message stating server not found.
Talked with t-mo and they say it's a compatibility issue with my OS and that I need to take it to the Apple store to fix the problem. They say this as I am connected with the internet and they've pinged my computer. I get text messages, but that may just be using the carrie signal, not the 4G.
I am wondering if anyone here has actually had the issue and what were the fixes.
Notes:
All my software is up to date:
     The T-Mobile WebConnect
     Firmware in the Rocket 3.0 4G updated
     Mac OSX fully updated including Java
Turned off Firewall, including "Stealth Mode," to see if that was issue.
Have 4G with 4 bars of signal
No other apps but the Webconnect and Firefox
Thanks in advance for the help.

Hi Jesusv87,
Thanks for using Apple Support Communities. This article has some steps you can take for issues sending and receiving MMS messages:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If you still can't send or receive MMS messages
To send and receive MMS messages on your iPhone, verify that your wireless carrier supports MMS2.
Ensure that MMS Messaging is turned on in Settings > Messages.
Verify that your phone is able to access cellular data.
Some carriers allow you to edit your APN (Access Point Name), which may prevent MMS from working.
If you are roaming outside your calling area, make sure you have Data Roaming turned on in Settings > General > Cellular to send or receive MMS content.
While on a phone call, you will be unable to send or receive MMS messages when using an EDGE, GPRS, or any CDMA cellular data network. After the phone call ends, you will receive any incoming messages. If you tried to send an MMS message, you may need to send it again.
If the issue persists and your wireless carrier has confirmed that your wireless account is provisioned2 for MMS, restore the iPhone.
If this doesn't help, please reply with any steps you are unable to complete and any additional information such as exact error messages or strange behavior.
Cheers,
- Ari

Web not Working

I reinstaled php but then that deleted apache so now their is no apache or php and now website so how do i reinstall both
Matt

Oh boy.
Your lock short key... use the lock key at the top edge of the device.
Your browser not working: has the device been registered on the network after the upgrade?
On your BlackBerry device, go to:
1. Options > Advanced > Host Routing Table > Menu > Register.
2. Resend your service books from your carrier BIS site:
From your handheld device:   http://www.blackberry.com/btsc/KB15402
Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
Finally, if you continue to experiece issues, call Verizon support.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Action & Droplet "save as" vs "save as web" not working - Possible bug?

Before I state the issue, I am running the latest updates and have tried this in Photoshop CS4 & CS5.
I believe this is a bug in Photoshop, unless someone can get this Action & droplet to work right.
Here's the issue:
I create an Action with the "Save as Web & Devices" and save the image as a PNG. Then create a Droplet and set the destination as "Folder" with a destination different from the source file, and check Override Action "Save As" Commands and use File Naming with Document Name + _H50 + extension (example: MyFile_H50.gif). The file naming convention I made doesn't carry over to the processed images.
However this droplet will work with the Action when I use the "Save As" command, but not the "save as web & devices" option. Has anyone came across this issue or know how to fix it?
The difference between "save as" and "Save as web" is a 3kb files size plus the "_H50" naming convention is not used.
Here's a detailed process of my action and creation of the droplet:
CREATION OF ACTION:
1.) I have a .TGA file open with alpha channel layer.
2.) I set the selection to the alpha channel, go back to the layers panel, double click layer, Set backgound to Layer 0, Inverse the selection, delete the background, trim image to transparent pixels, change image size to a fixed height of 50 pixels.
Here's the variable step that works or doesn't work depending if I choose "Save as" or "Save as Web & Devices"
3.) File > "Save as Web & Devices", save image as PNG w/ alpha, and select my "processed images" folder & save, close original image without saving.
CREATION OF DROPLET:
1.) Save droplet location, Play action with include subfolders, Suppress file open options dialog, Suppress Color profile warnings.
2.) Destination: Select a folder
3.) Use File Naming: Document Name + _H50 + extension
4.) Save log errors.
Next I drag some images onto the droplet, it processes the images into the folder but doesn't use the File Naming convention.
Now, if I use the "save as" command in the action and create the droplet the same way, it works!
The difference between "save as" and "Save as web" is a 3kb files size plus the "_H50" naming convention is not used.
What the heck is going on? Please Help
-Josh

The following example action and droplet may give you
an idea how to do this with one droplet.
The idea is to make an intermediate folder to save the renamed psds to.
Then use save for web to save the psds as pngs in a different folder.
1. Make a folder to hold the psd files (temp psd in the example droplet)
2. Open one of your targa files and record the steps to prepare your file
    (loading the channel selection, trim, etc)
3. Save your file as a psd.
4. Now save the file using save for web to the folder where you want your
final pngs to be (saved for web in the example action) and don't change
the file name when saving.
5. Go to the folder where you saved the png using save for web and delete that file.
   (so you don't get an overwrite message when using your droplet)
6. When creating the droplet, specify the name you want the saved pngs to be and
   choose the destination folder where the psds will be saved. (temp psd)
The end result of all this, should save your files, renamed as psds (to a folder)
and save for web should save the renamed psds as pngs, to the place
you saved the file using save for web.
One drawback of all this, you end up with a folder full of psds.
You could just delete the psd files inside the folder after each run.
(click on the images below to enlarge)
Hope this helps.
MTSTUNER

16.2.1 - save for web not working

I thought it was ME or some setting, and so I wasted an hour not getting web images. Save for Web LOOKS like it's working, but when I open those images up they are now at 300dpi. I need this to work. Has no one else encountered this?
I'm on 10.8.5, 3.33 GHz 6-Core.

Did you post the name of the program you are using and I somehow missed it?
Anyway, This forum is actually about the Cloud, not about using individual programs
For product specific questions you will do better in the specific product forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

Save for web not working

Hi
I 'saved for web' once and all OK when using the resultant quicktime webpage to check. Now this page just shows a green screen in the embedded video and only plays a loud static noise.
No changes made to location of files. I tried it again but no joy. In the finder the computer video has a different icon (a musical note) to the iPhone m4v and iphone (cellular) 3gp files(thumbnails of movie) and these two files play ok. I don't know what settings to alter if any. Another movie exported fine to the same drive.
Any ideas on where to start?
Cheers
Chris

The original movie file came from iMovie. It is quite large and I had trouble 'sharing' it. However that done it plays in QuickTime. I have now imported it to Adobe Premier and exported it (with a different file name) as an mp4v file (which it was before). On saving for web with Quicktime the version for computer still doesn't work.
Anything else?
Chris

Elements 12 save for the web not working

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, “ The operation could not be completed. The system cannot find the path specified” Resetting preferences did not fix. Windows 7 64 bit is the os

my os is windows 7. elements 12 worked fine for many months then save for the web stopped working

Excel 2013 Data From Web not working with SharePoint 2013?

In Excel 2013, on the ribbon select the 'Data' tab and 'From Web' to import data from a web page. Navigate to a SharePoint 2013 site with a table on the home page and you will not see the table import arrow on the table. With SharePoint 2010 you would have.
Any suggestions on a workaround/fix?
One thing to note, in SharePoint 2013 be sure to disable the Minimum Download Strategy feature on the site or you will get script errors in the New Web Query dialog.
Also, I realize this may belong in an Office/Excel forum so I have posted it there also.
Thanks, Fintan

Hi Fintan ,
According to your description, my understanding is that the Excel table import arrow disappears in the SharePoint 2013 page.
For your issue , I can reproduce your scenario in my SharePoint 2013 environment. It should be caused by the Excel Data connection from web page feature cannot identify the page layout which is
used by SharePoint 2013 . For a workaround, you export the HTML table using jQuery:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/30fc097f-256c-48d9-8b6c-cb821a504045/problem-while-exporting-html-table-to-excelcsv-in-sharepoint-2010?forum=sharepointgeneralprevious
http://community.office365.com/en-us/b/office_365_community_blog/archive/2013/07/31/how-to-use-power-query-for-excel-to-query-a-sharepoint-2013-list-grid-user-post.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Quickcam Web not working

Similar Messages

Maybe you are looking for