Quicken 2006 to HPc309a - Can't Print

All printing works OK from Microsoft apps except trying to print checks from Quicken 2006 to HPc309a. Updated both Quicken and pronter to the latest version but it continues to fail. Any clues?

Try this test, use 8.5 x 11 plain paper, do the cheques print?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

Since I downloaded Security Update 2012-006 for Mac OS X 10.6 I have been unable to print or upgrade my Quicken 2006. How can I fix this? Hurry! I need to pay my bills. thank you very much

Since I downloaded Security Update 2012-006 for Mac OS X 10.6 I have been unable to print or upgrade my Quicken 2006. How can I fix this? Hurry! I need to pay my bills.
thank you very much

Looks like Apple did the same thing with Lion that Microsoft did with Vista. Brought it on the market before it was ready.
I run a MacBook Pro and upgrading to Lion caused me two days of trouble and computer crash. Router settings removed and router blocked. Dongle not recognised, you name it.
In the end, I gave up and using my Snow Leopard installation disk and a Time Machine Backup finally got my computer up and running again. Thanks to Lion, I think I'll stay with OS X 10.6.8 at least it's reliable.

Since installing Snow Leopard 10.6.8 I can't print checks on Quicken 2006. I also discovered that my M.S. Word 2004 freezes and won't work when I try to "save as".

Since installation of Snow Leopard 10.6.8 a week ago, I have not been able to print checks on Quicken 2006.
Now I find that Word 2004 will not "save as" and freezes.
Any help?

Unfortuantely you are victim of bad timing. Apple did release a followup security update that fixes those issues. You can download it from:
http://support.apple.com/kb/DL1489
If issues still persist, the tip here:
http://snowleopard.wikidot.com/h-n
May help your Microsoft Office issue as far as duplicate font clearing.

Windows 7 64bit can't print from quicken

I have tried both my HP F4235 and C3150 printers with my new windows 7 computer running quicken. When i try to print a report the printer acts like it is going to print (i.e.. the carriage moves, etc.) but nothing prints. Nothing shows in the print queue. Quicken posts that it is having problems with HP printers and Windows 7 - see HP help. But I can't find anything.HELP anyone.

There have been some patches from Quicken to address these issues, make sure you have the latest updates. Quicken says only Quicken 2010 is supported in Windows 7 but suggests the following workaround.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Can I install snow leopard on an external hard drive so I can run quicken 2006, and put snow leopard on my imac harddrive

Can I install snow leopard on an external hard drive in order to run my quicken 2006, and install lion on the hard drive of my imac?

You don't need to erase the drive and repartition from scratch. You may be able to add a second partition on the fly. The caveat here is that once you do that you cannot create a Windows partition using Boot Camp. Of course if you have no plans for Boot Camp then it isn't relevant.
To create a second partition on your existing startup volume:
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Now, you cannot add a new partition that exceeds the amount of contiguous free space at the end of the drive. Disk Utility will fail to add the partition if it cannot find sufficient contiguous free space. If that's the case then you will need to follow your state outline - backup, boot from clone, erase internal, repartition internal, restore backup to one of the partitions (or both in your case.)

Where can I download adobe postscript driver for autocad 2006 so I can print in .pdf?

Where can I download adobe postscript driver for autocad 2006 so I can print in .pdf?

Hi,
Adobe Postscript printer driver can be installed from Windows 7 for example as blow:
1. Select Start >Devices and Printers > Add Printers
2. Select "Add a local printer" and click "Next" button
3. Select "Use an existing local port: LPT 1(Printer port)" and click "Next" button
4. Select Xerox from Manufature section then select Xerox Phaser xxxxx PS printer
Hisami

I can not print from QUICKEN . I have tried selecting the HP 960c series as per your directions,

I need help. I can not print from QUICKEN to my HP Officejet J6480 printer. Nothing happens. It was working in the recent past. NOw that I need to print out the remainder of my record for income tax prep, it won't print. I can not thinnk of a single thing that I have doen differently. I followed the directions to have a second printer HP 990c to "fool" the program into using it but it still does nothing. I have downloaded drivers etc, unplugged and replugged etc. "QUICKEN" is useless and says that HP is working on it. Can someone help me please

Hi there morinallen,
Try downloading and running the print and scan doctor located here to ensure there are no software conflicts:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Running 10.6.8 with quicken 2006. Would like to upgrade to a new machine/software. How can I save my quicken data?

Would like to upgrade to a new Macbook Pro machine/software. How can I save my quicken data from quicken 2006?

Users have reported that Quicken 2015 for Mac is an upgrade of the generally loathed Quicken Essentials for Mac.
I recommend you continue your Quicken operating experience by purchasing Quicken 2007 for Mac directly from Intuit for $15. It will open your Quicken 2006 file and operate as you have before.
To obtain Quicken 2007 for Mac for $15:
Use the chat feature for Quicken for Mac: Quicken 2007 for Lion: Shopping and Buying: Buying Quicken on this page

Can I continue to use Fusion to run my PC version of Quicken 2006 after I upgrade to Mountain Lion? I'm currently on Snow Leopard.

I am considering upgrading my OS on my 2008 iMac from Snow Leopard to Mountain Lion. However, I use Fusion to run my PC version of Quicken 2006 and have heard that I will no longer be able to do that. Any suggestions?

You can continue using it without any problem. However, check that you are running a VMware Fusion version that it's compatible with Mountain Lion (VMware Fusion 4 and 5 are compatible with Mountain Lion). If you upgrade and you want to use a non-compatible version, you will see kernel panics.
Also, make a backup before upgrading, although everything should work properly after upgrading to Mountain Lion

Can't print from Windows Explorer

After installing the "HP Officejet Pro 8600 e-All-in-One Printer - N911a", on a Windows 7 64-bit PC, that is Ethernet connected, I get the following error message:
Script Error
An error has occurred in the script on this page.
Line: 2061
Char: 1
Error: Invalid procedure call or argument
Code: 0
URL: res://ieframe.dll/preview.js
When I try to print from Windows Explorer; however, I can print from other applications such as Word and Quicken OK, and I can print from Explorer OK from a Windows XP PC. Anyone have any suggestions?

The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it. Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
2) Select each printer profile for the printer with an issue, then select remove device/printer.
3) Reboot
4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
6) Test by printing google.com (uses very little ink when the test page comes out).
Let me know if you have any questions or issues.
Thanks,
Dan
I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Can't print from Mac to Windows printer

I have a wireless network of 3 computers and a printer. One is a desktop running XP with the printer attached. The other is a laptop with XP. And the last is a MacBook with 10.4.11.
I can print from both computers running XP but I can't print from the Mac. The Mac sees the printer and I can add it and try to print from it. When I try to print I get the error message:
NTSTATUS_NOMEMORY
I later get the "Unable to connect to SAMBA host, will retry in 60 seconds" message too.

Be sure the printer name assigned in Windows is not more than 11 alphanumeric characters. Long names with punctuation and the like are known to cause problems.
Look at:
Mac OS X 10.4- Can't print to a printer shared by Microsoft Windows;
Mac OS X- Cannot locate a shared Windows printer;
Mac OS X- How to manually add a Windows shared printer;
Setting up to print to a printer shared by a Windows computer via SMB;
And finally this:
Monday, July 24 2006 @ 11:00 AM PDT
Tutorial: Resolving common printer problems
Mac OS X offers a robust printing system with built-in support for hundreds of devices from a wide body of manufacturers. It's not without flaws, however, and printers often become unrecognized or non-functional after a significant Mac OS X update. Printers connected through hubs or AirPort base stations can also exhibit some frustrating issues.
Below is a run-down of the most generally successful printer workarounds. Keep trying until one of them sticks.
Use Printer Setup Repair This tool lets you verify properties of the root user, the Printing Services (lp) user, and Print Operators (lp) groups, reset the printing system, perform CUPS maintenance and more. Run through its set of maintenance tasks before delving into further printer troubleshooting. See how to use it in this article.
Re-install CUPS If you are experiencing printer issues after applying an incremental Mac OS X update, problems may have occurred with your CUPS installation during the update process.
The file is available from this Web site: http://www.cups.org/software.php, and is labeled cups-1.2.1.dmg
Delete then re-add printers/Reset printing system Open Printer Setup Utility, located in Applications/Utilities and look at the "Printer List" Highlight and delete all entries.
Alternatively, go to the "Printer Setup Utility" menu at the top of the screen and select "Reset Printing System".
Click the "Add" button and re-add your printer(s).
Gutenprint and usbtb Some users have been able to resolve printer communication issues by installing the excellent open-source Epson printer drivers available as part of the Gutenprint package (formerly known as Gimp-print) and usbtb, a CUPS back-end for USB printing.
Remove non-required drivers Removing extraneous drivers from /Library/Printers(name of manufacturer) can sometimes resolve printer issues. Remove files that are for other models than your own.
Re-install drivers Re-installation of printer drivers from original media or from a Web download (either directly through the manufacturers site or via a search by model/manufacturer on VersionTracker) can resolve some printer issues.
Try disconnecting from network In some cases, LAN-connected printer, seemingly broken by the Mac OS X update can restored to normal operation by simply disconnecting the device from the network then re-connecting it.
"Communicator Error" -- try power cycling If you receive a "Communication Error" message when attempting to print after updating to Mac OS X 10.4.5, the first workaround you should try is power cycling the printer, as well as disconnecting then re-connecting it to the Mac.
Connecting directly to the Mac If you are having printer problems and are using an external USB hub, try connecting the printer directly to your Mac.
One reader who had success with this method writes:
"Unfortunately the update to Mac OS X 10.4.6 has eliminated the ability to use my Lexmark Z600 series USB printer on my iMac G5 20" iSight (rev C).
"I resolved the problem via the following: I unplugged my external USB hub and plugged the printer directly to my computer."
Disconnect from AirPort and reset For those who are using printers connected to an AirPort Express, Extreme or another wireless device with USB connections, you might want to try the following:
Disconnect the printer from the AirPort unit (or other router)
Wait a few minutes
Plug it back in
Restart the base station unit
Check for your printer to appear in AirPort Admin Utility (located in Applications/Utilities)
Print one copy In some cases, using print one copy instead of the standard print command can result in elimination of crashes that occur during printing.
Try IP printing instead of AppleTalk Some Macs are unable to see AppleTalk printers that are located on the local AirPort (or other wireless) network. Several users have been able to workaround this issue by using IP printing instead of AppleTalk.
Last resort -- Archive and Install As a last resort, try performing the somewhat tedious Archive and Install process, then re-upgrading to Mac OS X 10.4.7. This has solved some otherwise inexplicable printer issues for MacFixIt readers.

HT204365 how can I print a list of books and authors in my iBooks listing

can / how can I print off a list of books and authors in my iBooks listing

I've asked your post be moved to the iBooks iOS forum. You posted to the pre-2006 notebooks of the same name forum.

Adobe Reader 10.1.2 on my mac, can't print pdfs, and the patch doesn't seem to help. What do I do???

I downloaded AdobeReader 10.1.2 and I can read pdfs just fine. But I can no print them and it's FRUSTRATING. I came to this forum and followed the instructions for downloading the AdobeReaderPatch. I tried it but it didn't help. Is it just for PCs? What do I do to print my PDFs???
I have several pending deadlines SOON and I need an answer ASAP!
THANKS!!

I received a notice from Chris Campbell at Adobe that stated : "....we are aware that Macs created between 2006 and 2008 are currently running into problems using the latest release of Flash Player (version 13)." My question is will the update of Adobe Reader 11.0.07 cause this problem with Flash Player 13 on my Mac? Sometimes when I try to view streaming video I get sound but no video.
>

Help! I can't print to HP Printer across LAN

I can't print on my HP psc 1350xi all in one scanner and printer from my iMac G5 across my LAN. The printer is connected to my old iMac 600 MHz computer, running 10.2.8, through the USB 1 port, and the two iMacs are networked through a wired Linksys router. The G5 iMac can find the printer on the network, but it won't let me add it as a device. When I was using 10.4.2 on the G5 it worked just fine across the network. But, since I upgraded to 10.4.5 the Add button in the print selection pane fails to highlight when selecting the printer.
I went to HP's website and followed their instructions to un-install and reload new driver software which was dated 1-2006. This didn't help at all.
Does anyone have any idea how to get the G5 iMac to add the printer across the LAN?
Thanks in advance,
Bob

Bob,
I would suggest three things:
1. Reinstall the latest combo update (10.4.5)
2. Repair disk permission from Disk Utility
3. Create a new user and try to install the printer
hope that helps,
Mihalis.
Dual G5 @ 2GHz Mac OS X (10.4.5)

Can't print more than 75 reports... Load report failed

Hi,
I have a problem: I can't print more than 75 reports without restarting my application.
I'm using VB, Visual Studio 2005 and Crystal Reports Developer XI Release 2.
It's a windows application.
In the following examples I'm exporting to pdf but the same hapens if I put it on a viewer.
I tried to do some tests to find out the problem. I don't have a solution yet
Test 1:
I made a cycle printing 100 times the same report. I used the code from an example that was in the BusinessObjects website and just put it into a cycle. At 75 I get the error "Load Report Failed"
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
Dim ExportFolder As String = Application.StartupPath + "\export"
If Not IO.Directory.Exists(ExportFolder) Then
IO.Directory.CreateDirectory(ExportFolder)
End If
For i As Integer = 1 To 100
Dim crReportDocument As ReportDocument
Dim crDiskFileDestinationOptions As DiskFileDestinationOptions
''The path/location where the exported file will be saved
Dim exportFilePath As String = ExportFolder + "\exported" & i & ".pdf"
''Create an instance of the Chart report
crReportDocument = New Chart()
''Set the options for saving the exported file to disk
crDiskFileDestinationOptions = New DiskFileDestinationOptions()
crDiskFileDestinationOptions.DiskFileName = exportFilePath
crReportDocument.ExportOptions.DestinationOptions = crDiskFileDestinationOptions
crReportDocument.ExportOptions.ExportDestinationType = ExportDestinationType.DiskFile
crReportDocument.ExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat
''Export the report
crReportDocument.Export()
Next
Test 2:
I try to insert a "crReportDocument.Dispose() after the Export. It takes more than 1 minute doing the dispose and lots of time processing the 2nd report (more than 2 minutes)
Dim ExportFolder As String = Application.StartupPath + "\export"
If Not IO.Directory.Exists(ExportFolder) Then
IO.Directory.CreateDirectory(ExportFolder)
End If
For i As Integer = 1 To 100
Dim crReportDocument As ReportDocument
Dim crDiskFileDestinationOptions As DiskFileDestinationOptions
''The path/location where the exported file will be saved
Dim exportFilePath As String = ExportFolder + "\exported" & i & ".pdf"
''Create an instance of the Chart report
crReportDocument = New Chart()
''Set the options for saving the exported file to disk
crDiskFileDestinationOptions = New DiskFileDestinationOptions()
crDiskFileDestinationOptions.DiskFileName = exportFilePath
crReportDocument.ExportOptions.DestinationOptions = crDiskFileDestinationOptions
crReportDocument.ExportOptions.ExportDestinationType = ExportDestinationType.DiskFile
crReportDocument.ExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat
''Export the report
crReportDocument.Export()
' Dispose
crReportDocument.Dispose()
Next
Test 3
Same as Test3 but with ReportDocument.Close() before the dispose.
Still doesn't work, Close takes too long, just like Dispose...
Test 4
I tried using a global variable with the ReportDocument.
Instead of creating new instances of the ReportDocument, I keep using the same.
It works fine if I use always the same report file, but if I try to print 2 different reports the 2nd returns the error "Load Report Failed" and takes too long loading before the error.
Well, I made some researches on internet and I foud this, but still doesn't work with me, because Dispose always takes too long...
http://www.arquitecturadesoftware.org/blogs/hugobatista/archive/2006/02/22/236.aspx
http://www.arquitecturadesoftware.org/blogs/hugobatista/archive/2006/05/23/328.aspx
http://www.arquitecturadesoftware.org/blogs/hugobatista/archive/2007/04/05/CrystalReportsMemoryLeakFixByJerryCote.aspx
Can anybody help?
Thanks
Isabel
Edited by: Isabel Cabral on Aug 12, 2008 8:12 PM

Already tried that, then I get another problem...
After exporting the first report, takes 1 or 2 minutes doing the Close and the Dispose, and after that it takes too long trying to load the next report (after 1 hour I give up!).
This is the code I'm using to do the tests:
        'Create the export folder
        Dim ExportFolder As String = Application.StartupPath + "\export"
        If Not IO.Directory.Exists(ExportFolder) Then
            IO.Directory.CreateDirectory(ExportFolder)
        End If
        For i As Integer = 1 To 100
            Dim crReportDocument As ReportDocument
            Dim crDiskFileDestinationOptions As DiskFileDestinationOptions
            ''The path/location where the exported file will be saved
            Dim exportFilePath As String = ExportFolder + "\exported" & i & ".pdf"
            ''Create an instance of the Chart report
            crReportDocument = New Chart()
            ''Set the options for saving the exported file to disk
            crDiskFileDestinationOptions = New DiskFileDestinationOptions()
            crDiskFileDestinationOptions.DiskFileName = exportFilePath
            crReportDocument.ExportOptions.DestinationOptions = crDiskFileDestinationOptions
            crReportDocument.ExportOptions.ExportDestinationType = ExportDestinationType.DiskFile
            crReportDocument.ExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat
            ''Export the report
            crReportDocument.Export()
            'Close and dispose
            crReportDocument.Close()
            crReportDocument.Dispose()
        Next
Thanks,
Isabel

Quicken 2006 to HPc309a - Can't Print

Similar Messages

Maybe you are looking for