Quicken files share between mac and PC?

I know this is really not the forum for this but someone may be able to give me this answer.
Client has a PC and Mac at home wants to share the Quicken file between the two computers.
Will Intuit allow Quicken to be open on both PC and Mac?
I am thinking the answer is no

Jeffrey,
The short answer is No.
The long answer is No. Quicken data files are not meant to be transferred between Quicken for Microsoft Windows and Quicken for Mac. Currently, there is not an available converter tool. There is a manual process available to accommodate the infrequent switch from one operating system to another; Intuit does not recommend performing this process on a regular basis. It is important to note that not all data will convert seamlessly. There is potential for duplication or loss of data due to major differences inherent to the operating system or version you are switching to.;~)

Similar Messages

How do you file share between mac and pc?

i need to know how one can share files between a mac and a pc. my MBP is running os x 10.5.2 and my PC is running vista.
thanks!

Mac/Windows Networking in Leopard
The following articles outline how to set up networking between Macs using Leopard and Windows PCs:
Setting up a Windows computer to share files with Mac users
Setting up a Mac computer to share files with Windows users
Sharing with Windows computers
If you can’t connect to your Mac from a Windows computer
Sharing your computer with others on your network
More information is also available by selecting Mac Help from the Finder's Help menu and searching for the relevant terms such as "windows", "networking", "sharing", etc.
Also read:
Simple guide to Leopard/Windows Home Networking
Written by Intercepter121 and originally posted on the Apple Discussions here.
If your network complies to the minimum requirements described below you should be able to share resources without any need to enter commands in the terminal to modify configuration files in your mac.
Requirements
1. A decent router
2. Mac Os x 10.5.1 installed on your macs
3. Windows XP or Vista
4. Number of network devices <10
5. Some network printers or drives (NAS)
6. A decent ISP offering a good DNS service
<u>General Settings
If your router offers DHCP and any of the device has power saving features there is a risk that the IP addresses are renewed. This can be problematic as the devices keep changing IP addresses. As this is your network is strongly recommended to reserve IP addresses to the MAC (Machine Address Code) of the various devices so that they can power on and off and still keep the same IP.This simple suggestion will greatly improve the browsing of the local network.
Accessing Windows Resources from Leopard with no authentication
Windows
1. Check the settings of the PC and ensure the IP addresses on the local LAN are trusted
2. Activate sharing on the desired devices ensuring the shares are read and write. If you use Vista ensure password protected sharing is disabled.
3. Try to access the windows share from another windows computer if available to confirm no authentication is required
MAC
1. Go into system preferences->security-Firewall check that the setting is not on allow only essential services. Recommended settings is allow access to specific
2. Go back into system preferences network. On the tab location click edit locations. Duplicate Automatic and call the new location Home. Now select the Home location and go into Advanced-WINS. In the workgroup field enter the same value that is on the other windows computers for example HOME. Now press enter then go back to the main screen. Select Edit locations and delete the location automatic. Now edit your location Home and rename it Automatic. This workaround is a leopard bug described here.
3. Give 5 minutes to allow all the other machines to broadcast their IP address and the other computers should appear on the left side of your finder window. You can now select the shares you want to connect. As no authentication is active if you are prompted with a user name just press OK.
The procedure to access a NAS is the same as above, just ensure permissions are set to files are read/write for anyone to avoid confusion.
NOTE: There is no need to activate SMB sharing if you don't want to allow the PC to read folders on your MAC
Troubleshooting
After you have followed all the steps you don't see any windows PC.
Identify the IP address of the machine you want to connect. In finder select Option+K and enter SMB://IPADDRESS. If you can connect you have a name resolution problem. Go into your router configuration and ensure that the option DNS assigned by ISP is selected and you don't have services like Open DNS in use and fixed IP addresses in that field. Apply the changes and reboot the router. You should start seeing windows PC in finder shortly after.
Your ISP DNS service is poor and you must use Open DNS or similar
If you are forced to use services like open dns you have the risk that the router propagates the DNS servers to your machines. As the implementation of SAMBA in Leopard effectively blocks the MAC to be a master browser for performance reasons you end in a situation in which tiger machines connect and leopard ones don't see a single share. Let's fix it.
1. Go into System Preferences->Network then advanced DNS if you see here the IP addresses of the open dns servers this is the case. Unfortunately you will be forced to change the hosts file.
2.Ensure you have reserved IP addresses to all your machines so that they always get the same IP.
3. Now login into your mac as administrator and go into utilities=>terminal.
4. Issue the following command sudo pico /etc/hosts
5. Now scroll down and enter all the IP addresses and computer names of any device you want to browse
6. Reboot your MAC
The windows devices will now appear in finder and you will be able to connect with Option+K.
You cannot access shares even entering the IP address
You have not reserved IP addresses to each machine. Go into your router LAN set up and make sure that is the case.
Accessing Leopard resources from Windows
1. Go into system preferences->security-Firewall check that the setting is not on allow only essential services. Recommended settings is allow access to specific
2. Go into System preferences->accounts and click on Guest flag the option Enable guest account to access shared folders
3. Now into System preferences->sharing select file sharing and then options here flag SMB and select the user that has to be logged into the computer when the share has to be accessed. Ensure that the folder you want to share has read/write or whatever permissions you like it to have set for Everyone
You should now be able to see your MAC in the windows network resources and access the shared folder with a double click without any password request.
Troubleshooting
You don't see any MACs from Windows
Check the firewall settings at the start of this post. Then go back to the Network configuration hit advanced and then TCPIP check is using DHCP and not a fixed address. Then check the sharing is set as above with SMB clicked. If SMB is not set you won't even see your mac from windows.
You see the MAC and the shared folders but you can't read or write on it
Ensure you have set the guest account to access shared folders. Then check on the sharing preferences that there is at least one folder with read permission for everyone. The classic case here is Dropbox that leopard sets as read and write for the user of the MAC but no access for other users. You try to click on drop box and receive an error but when you actually try to write a file you can do it. Check the permissions on the subfolders of the share as those permissions will prevail on the home shared folders
FAQ
You may want to do more complicated things, but first ensure you can actually share files without security in place so you can identify the root cause of your possible problems
I want to password protect my windows shares: once you have done the relative set up in windows vista and ensured you can connect from another windows machine you will need to use user name and password of the Vista user to connect.
I want to password protect my MAC shared folders: Go into user account and disable guest access to shared folders is no shared folder has to be accessed without password otherwise leave it checked. Create a new user for sharing (better than giving away your password) so that this user only accesses the folders you want to share. In System preferences network select file sharing SMB and flag only the new user you have defined. Then go back to the folder section and set the permissions you like on the folder you want to share for this newly defined user.
Good Luck

File transfer between Mac and Windows

I am running Windows on my Mac and I transfer files between mac and Windows alot using my external hard drive. I was wondering if there was an easier way to do this than having to use my external hard drive like a networking solution or something. Thanks...

i also run windows on my mac (for work). The issue i had was that when booted in osx, i could see the windows partition, and copy files FROM it to the mac side, but i could not copy files TO the windows partition.
As i understand it, this is because the apple NTFS driver (to read the windows partition) only allows read access (not read and write access). It was easily solved with MacFuse (which is an open source way to add different disk file systems to your mac, kind of like teaching it a new language), and NTFS-3G for mac osx.
http://macntfs-3g.blogspot.com/
scroll down a bit for the download link. The installer will put in MacFuse and NTFS-3G, so it's the only one you need.
After a reboot, i can read/write to the windows partition while booted into macosx (and it's free).
i hope that helps.
p.s. the efi boot manager download is NOT required.

Common URL format for sharing file paths between Mac and Windows?

Hi -
I have to integrate several Macs into a Windows environment. We need to be able to copy and paste file paths to share between all machines. Is there a common URL format that can be used between the platforms?
On Windows, I have:
\\server\share\file
On the Mac:
smb://server/share/file
Thank you for your help,
Steve

On Windows you have what is known as a "UNC".
On the Mac, you have a "URL". It starts with the protocol to use "smb" then gives the path to the item using standard conventions.
UNC is Microsoft mainly.
The only way I know for Windows to use a URL is with an application like a web browser or ftp client.
On the Mac, you can use UNCs but they must be modified as follows.
In Terminal:
smbclient \\\\servername\\sharename\\filename -U username
And enter a password if prompted.
Notice that you must double up the slashes. This is due to how UNIX shells treat the backslash.
You will connect to the share, but it will only be in Terminal.

Sharing Quicken Files Over a Mac and PC Network

I've been sharing Quicken files over a PC network for years without any problems.
Now that I have a Mac, I want to move Quicken to the iMac, but still be able to access and update the files using a PC.
I know that Quicken for the PC and Quicken for the Mac are 2 different programs and the data files are incompatible. I do have VMWare Fusion, but have yet to install it.
If I run Quicken 2007 (PC Version) on the Mac using Fusion, can I also access the files using a separate PC? If so, what do I need to do to set this up?
The PC is running XP Pro. I've got a wireless home network and will probably install XP home edition on the Mac, though I have not fully decided on the Windows OS I'm going to install.
Thanks in advance.

No offense, but you are not being helpful.
I have tried the Quicken forums with no help. I have also tried searching this forum and have not been able to find the answer I need.
From what it sounds like, you don't know the answer either. But somebody else might and I would appreciate it if you didn't discourage others from answering.

File transfer between mac and windows 7

Is it possible to transfer files between my Mac and a windows 7 machine via bluetooth?
MacBook Pro OS X 10.6.4
Thanks

It will be slow, but there's no reason it shouldn't work as long as the Bluetooth hardware on both computers has the File Transfer Profile (all Macs do), and *Bluetooth Sharing* is checked in the Sharing system preferences pane on the Mac.
If the computers are close enough to send files via Bluetooth, you'd be much better off just networking them together. You can then "mount" the PC hard disk on the Mac like any other disk and move files around easily. It will be hundreds of times faster too.

File sharing between Mac and PC CS5

While our graphic designer, who uses a Mac, is on maternity leave, I am doing whatever graphics-type work we have on my work PC. I have CS5 and so does the Mac (I have checked multiple times, we both have CS5; NOT CS5.5 on either machine). I cannot open many of her InDesign files because it says that I don't have some of the same plug-ins. I have tried just copying her plug-ins, but an error occurs when I try to copy them. I realize some things may be missing, but I should at least be able to open those files. We am I missing? Or will upgrading both to CS5.5 solve this problem?
This is very frustrating as I can't really get anything done moving around between offices and computers all day; this is why we have a shared drive system. Please let me know what we can do.

If in doubt about an InDesign document version, you can use my IDentify script: http://forums.adobe.com/message/4071273#4071273 (if only to make absolutely sure these files are, in fact, '5 files, and not '5.5s).
It's strange & somewhat worrying that your InDesign won't update -- the latest version is 7.0.4 and that's what the updater ought to install. HOWEVER, I do not believe InDesign would refuse to load a document from an updated version. That just can't be right.
So, please try my little script. Just in case this co-worker happened to have the newer version somewhere at home, or something like that.

File sharing between Macs and PCs

I'm not able to properly network a Mac and a PC laptop in my office. The Mac is running 10.4.9, the PC is running XP Service Pack 2. Here's what I'm doing:
I right-click on a Windows folder. On the "Sharing" tab I click on "Share this folder on the network."
I go over to the Mac. I try to browse the network; the PC doesn't show up. I type command-K, type in smb://[my PC name] into the box. A dialog box pops up indicating that it's trying to connect, but nothing happens.
Similarly, if I turn on Windows File Sharing on the Mac and try to go the other way (access the Mac from the PC), that doesn't work either.
What am I doing wrong?
Thanks very much.
G5 Dual 2.5 GHz Mac OS X (10.4.8)

I am having a similar problem getting onto a Windows network with my Mac.
I select Finder/Go/Connect to server...
I then enter my server's address, and click on the "connect" button. I get the "connecting to server" dialog box. Then I get the "SMB/CIFS File System Authentication" dialog box. The "Workgroup or Domain" box already is filed in with the proper name, so it appears to me that I have made contact with the server. The "name" box shows up filled in with my .mac name, so I delete it and type in my Windows user name. I then fill in my Windows password, and click on the "OK" button.
Then the "connecting to server" dialog box reads "could not connect to the server because the name or password is incorrect."
I am using the same name and password that I use when I get on the netowrk with my Dell. In fact, I will plug the ethernet cable into my Dell and get onto the network. I then log off, switch the cable to my MacBook Pro, and I cannot get on.
Any thoughts on why the server is sending my MacBook Pro the "wrong name or password" message, but letting my Dell on?
MacBook Pro Mac OS X (10.4.9)

About file sharing between mac and pc

i bought a mac mini for my home server for file share for two external HDD (and airvideo but i know it works) with movies for the family i setup up the file share in the sharing tab in system perferences with one external HDD to have a test to see if it works but i can access the mac mini computer on windows and I can't access the external HDD it comes up with this error wen i am trying to access it heres a screenshot of the error.
if anyone can help it will greatly appreticated.

http://support.apple.com/kb/PH11197
http://support.apple.com/kb/HT1549
http://support.apple.com/kb/HT1408
How to transfer data from a PC to a Mac
Not sure if the above Articles are of any help but it's worth a try.

Any issues with file sharing between Windows and latest Mac client?

We're running Lync 2013. My Windows client is 15.0.4551.1005. Mac client is version 14.0.8.
I open a conversation with a coworker on his Mac. I then try to share a png file. He clicks accept but then my client says the attempt timed out, and his client says that I canceled the file transfer. The coworker then boots the Mac into Windows and we try
again, and the file share works fine. When I jump on my Mac, I can send files to his Mac without issue. When he tries to send from his Mac to my PC it fails, but when he tries to send from Windows on his Mac to my PC, it works.
I can't find anything specific in the logs that would indicate a firewall issue. Is there a bug with file sharing between the Mac and PC clients?
Thanks,
Matt

No, There isn't a bug with file sharing between Mac and Pc client.
2941640 Desktop sharing session stops in Lync 2013 when all screen data is updated
Also you can check below links
http://support.microsoft.com/kb/2952672/en-us
http://support.microsoft.com/kb/2880474/en-gb
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Share files between Mac and Windows in same iMac with boot camp

Hello,
I am new in using Mac and recently I buy a IMac 24" model.
I used to use PC a long time with a lot of old document.
I want to install Windows XP with boot camp.
But I also want to share my documents, music, video files between Mac and Windows in same iMac.
How can I do this?
Thanks in advance,
Eric

Hi Eric and welcome to Discussions and the Apple world.
Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
However with FAT32 you are limited to a partition size of 32GB.
Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
Regards
Stefan

File sharing between Mac Mini and iMac "breaks" after reboot of either device, and won't restore. Why? Running Maverick 10.9.1 on both. File sharing is setup on both. Help.

I'm a new user - recent convert from longtime Windows to Apple. Thought having desktops and computing aligned with phones and tablets would help. Not so far.
I have a MacMini running Mavericks 10.9.1, and an iMac running Mavericks 10.9.1. File Sharing is set up on both. If either device is rebooted for any reason, file sharing from the Mac Mini to the iMac "breaks" and will not easily restart. Various things eventually brings the connection back - usually having to do with checking and unchecking File Sharing, the AFP button, and/or the SMB button on the iMac - but never the same procedure twice in a row. File Sharing from the iMac to the Mac Mini is never disrupted - always comes back up without a problem. Screen Sharing also works between both without fail, and comes up after reboot of either. No problem there. Only difficulty is from Mac Mini to the iMac.
Why? Any ideas?

Should also clarify - usually takes multiple hours of checking/unchecking file sharing settings in order to restore the share between Mac Mini and iMac. NEVER happens automatically.
This is disruptive because I've got the Mac Mini pointing to several file locations on the iMac for various things - photos, music, etc. - and they all hang up unless the share is restored. Real bummer.

Share filing between Mac and Windows Vista

Hello,
I am trying to file share my iBook and Vista.
On my I book under Finder >>>Network>> I see my computer name "Computer-PC" but the icon is grayed out.
When I click on it it says:
The Alias "Computer-PC" Could not opened, because the original item cannot be found. Then it gives me 3 choices
Delete Alias, Fix Alias , OK
I hit OK it does nothing
I hit Fix Alias, Then it ask me to choose an item to open. I dont know what to open????
I do not want to Delete Alias.
Also I tried to connect Vista and it does see the IBook on the network, but then when I try to connect It asks for the user name and password of my iBook
I verified this by reading the support docs on the Apple website.
System Preference >>>Systems >>>Accounts >> verified and changed password.
Still no luck. Can someone give me some advice? Thanks!!

There are more than a few threads on the topic across the web; so I guess a search
would be in order and some sorting of results to enable a wise choice from them.
There's also the Apple Help built into OS X and some ideas present themselves.
Firewall changes would probably be necessary, and the Sharing (system preference)
panel has some access settings for some of this sort of thing.
(The closest I have been to sharing between a Windows machine and a Mac, is when
I let a few Windows machines mistakenly given to me to troubleshoot & repair, were
brought into my space and they temporarily shared a workbench. I found out what
was wrong with them (outside of the poor quality & shabby OS) -- and out they went!)
•Networking Mac OS X and Windows Vista - google search
http://www.google.com/search?hl=en&q=NetworkingMac+OS+X+and+WindowsVista&btnG=Search
•File Sharing between Mac OS X and Vista - google search
http://www.google.com/search?hl=en&q=FileSharing+between+Mac+OS+X+and+Vista&btnG=GoogleSearch
•Networking Windows Vista and Mac OS X - google search
http://www.google.com/search?hl=en&q=NetworkingWindows+Vista+and+Mac+OSX&btnG=Search
•File Sharing between Windows Vista and Mac OS X
http://www.google.com/search?hl=en&q=FileSharing+between+Windows+Vista+and+Mac+OS+X&btnG=GoogleSearch
edited.

Sharing linked files between mac and pc

Dear Community and AI Support,
My team is trying to share AI files between Macs and PCs. That works fine until we have Linked assets. Once we have linked assets, AI either forgets to, or is unable to, let us relink more than one of the linked files. We can't edit the links or even delete them. The linked files are just ignored, leaving the file half empty.
We've tried hacking the paths directly in the .AI file, hoping to eventually write a perl script to help us switch back and forth. but no luck. We assume there is a checksum or crc code or hash, etc..., as AI won't even try to open the file after that.
But to clarify the issue. here is an example of the Mac and PC links we need to switch between using an excerpt from the AI file. These are valid, working directories on both platforms.
Mac flavor:
               <rdf:li rdf:parseType="Resource">
                  <stMfs:linkForm>EmbedByReference</stMfs:linkForm>
                  <stMfs:reference rdf:parseType="Resource">
                     <stRef:filePath>/T/source/stories/00002/characters/puppy.ai</stRef:filePath>
                     <stRef:documentID>xmp.did:5bbaeed4-f8e3-f54b-b302-0b9d14f5a0eb</stRef:documentID>
                     <stRef:instanceID>uuid:1f66816c-99cb-4d62-ab88-aa6f9c92adad</stRef:instanceID>
                  </stMfs:reference>
               </rdf:li>
Win flavor:
               <rdf:li rdf:parseType="Resource">
                  <stMfs:linkForm>EmbedByReference</stMfs:linkForm>
                  <stMfs:reference rdf:parseType="Resource">
                     <stRef:filePath>T:\source\stories\00002\characters\puppy.ai</stRef:filePath>
                     <stRef:documentID>xmp.did:5bbaeed4-f8e3-f54b-b302-0b9d14f5a0eb</stRef:documentID>
                     <stRef:instanceID>uuid:1f66816c-99cb-4d62-ab88-aa6f9c92adad</stRef:instanceID>
                  </stMfs:reference>
               </rdf:li>
Thanks! :]
Chris

ooohhhhh very interesting. I did a find and replace on all the strings, but no dice. I didn't think to look at those types of data. But now that you have mentioned it, perhaps I'll do a diff on the same file saved on both platforms to see what has been changed. Should have already thought of it, but your note has made me check my assumptions.

Is there a way to file share between an iMac and iPad?

I'm curious as to whether or not you can file share between an iPad and an iMac. The main reason would be in case my wife or I were working on something on the iMac downstairs, we could "pull it up" on the iPad upstairs without having to sync it with the cable....or perhaps I'm just lazy...

check out FileBrowser.
another option may be Dropbox.

Quicken files share between mac and PC?

Similar Messages

Maybe you are looking for