Quicken is unable to access financial info

Just installed a new Airport Extreme and ran into what appears to be a firewall issue. Quicken returns an error "OL-261", which according to the folks at Quicken means that their software was unable to establish a connection to the relevant web site to download the transaction info. They suggest that the firewall needs to specify that Quicken is allowed access.
I can't find any place on the AE control panel to make this adjustment. Any suggestions would be most welcome!

Welcome to the discussions!
There is no firewall on the AirPort Extreme.
You might want to check the settings on your computer.
System Preferences > Security > Firewall tab
Try allowing all incoming connections

Similar Messages

I just loaded Lion and now my quicken program can't be used. What do I do to access my financial info?

I just installed Lion and now my Quicken program can't be used, says it isn't supported. What do I do to access my financial info? Also all my old files created under AppleWorks 6 that weren't converted are no longer accessible. Any help with these is appreciated. I am away from my Time Capsule and can't retrieve anything for 2 weeks. Will I be able to go back and access this info with Lion?

I recently made the same mistake. The thing to do is download the new Quicken Essentials for MAC. After you install the new version follow the instructions on how to transfer your old files. There is a way, it just takes a little time and, if I remember correctly, it takes the info from your quicken backup files. Hopefully you had auto back up on and your files are intact. I didn't and reconstruction was a bear but entirely possible. The new Quicken is quite different but seems to work quite well. Good luck.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.

Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself.

TS3297 I keep trying to purchase something in the iStore but it comes up with "Your account is temporarily unavailable" "Store unable to access my account info" But I have checked my account info and everything is up to date.

I keep trying to purchase something in the iTunes Store but it comes up with "Your account is temporarily unavailable" "Store unable to access my account info" But I have checked my account info and everything is up to date.
I have some money from a card still on my account that I would like to use.

This has been an issue with some users for close to 24 hours now. I've been getting the error for the last 5 or so hours myself.
Having problems is understandable, it happens. and if this is related to the iCloud hack reported yesterday it is good to know Apple is trying to fix the issue.
But it sure would be nice if there was an official statement from Apple concerning this.

Unable to update my macbook, access macbook info/preferences, or adjust volume

Unable to update my macbook, access macbook info/preferences, or adjust volume

Hello Terence,
Thanks for your reply.
So if iPhoto is installed through some other account in my Mac and I'm using it the other person can't access my iPhoto library...right?
I don't want to give anyone access to my library or system hard drive, So can you please let me know how to check what has been shared with others from a mac. (also the hard drive)
As this is my Mac which I've bought but for 1st 10 days one of my friend used it using his apple ID
So I want my Mac fully secured from now onwards.
Regards,
Sri

Unable to Access BI InfoSet in Crystal Reports using SAP Info sets driver

Hi,
I am looking to develop a report on top of BI InfoSet in Crystal Reports. However using the the SAP InfoSets driver I am only able to visualize 'Classic InfoSet' and 'SAP Query'. It does not show the option to import the regular InfoSet as a datasource. I am unable to access the InfoSet built by the db join on InfoCubes that is available in SAP BW System.
Can anybody help.
Thanks,
Amogh

Hi all,
i know this discussion is abaout 2 years old, but i faced a similar problem. I try to get access to the regular InfoSets (SQ02) within a direct connection between SAP and Crystal Reports. Which components and tools did i need to get a connection?
look here: http://scn.sap.com/thread/3365060
Thanx for your help!
Best Regards
David

Unable to access sites......."Too many http redirects"

The last week or so I've been unable to access some of my financial accounts using my iPad 3 and iOS 6( everything is updated). I'll either get the message that's in the title of this thread, or nothing will happen when clicking a "submit" tab, or on one site the info displayed in my account was of a previous day(wasn't updated and remained that way for a couple of days).
I first noticed this problem when using the 1Password app, but have found the problem occurs even when I access a site w/o using that app. I thought it might be browser related, but have the same issue when using Safari, Chrome or Dolphin. I have also quit/restarted 1Password and all browsers. I have no problem accessing these sites while on my MBP using ML.
Is this a problem with ios6 that needs to be addressed? Or something on my end?

It appears to be browser specific. I can access the problem sites using Atomic and Opera browsers. C'mon Apple, get a fix for Safari.

Unable to access applications in workspace,shared services

Hi ,
I am Unable to access applications in workspace and shared services on EPM 11.1.1.3. It happened after normal shutdown/startup scripts were run.
But when I reconfigure the Weblogic web server and run the services again I can access the applications.This is happening frequently now.
Is this anything related to user profiles on the server as we are migrating these to other server.
Can any one help me with this .
Please find the Shared services log below:
<22-Oct-2010 10:25:19 o'clock BST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
D:\bea\weblogic92\platform\lib\p13n\p13n-schemas.jar;D:\bea\weblogic92\platform\lib\p13n\p13n_common.jar;D:\bea\weblogic92\platform\lib\p13n\p13n_system.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_common.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_schemas.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_system.jar;D:\bea\weblogic92\platform\lib\wlp\wsrp-common.jar>
<22-Oct-2010 10:25:21 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-windows-ia32 from BEA Systems, Inc.>
<22-Oct-2010 10:25:25 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 MP3 Mon Mar 10 08:28:41 EDT 2008 1096261 >
<22-Oct-2010 10:25:29 o'clock BST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
<22-Oct-2010 10:25:29 o'clock BST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<22-Oct-2010 10:25:29 o'clock BST> <Info> <WebLogicServer> <BEA-000215> <Loaded License : D:\bea\license.bea>
<22-Oct-2010 10:25:29 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<22-Oct-2010 10:25:29 o'clock BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<22-Oct-2010 10:25:30 o'clock BST> <Notice> <Log Management> <BEA-170019> <The server log file D:\Hyperion\deployments\WebLogic9\servers\SharedServices9\logs\SharedServices9.log is opened. All server side log events will be written to this file.>
<22-Oct-2010 10:25:47 o'clock BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<22-Oct-2010 10:25:57 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<22-Oct-2010 10:25:57 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
log dir isD:\Hyperion\logs\SharedServices9
urlManifest zip:D:/Hyperion/deployments/temp/servers/SharedServices9/tmp/_WL_user/interop/tthmcu/war/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
Shared Services Version: 11.1.1.3.24
Shared Services Drop Number: 6
Attempting to verify the database configuration
Attempting to verify the database configuration
Database configuration test passed.
22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Auto-Initializing Domain
22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Configuration found in classpath
22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Domain configuration : {org.apache.slide.lock=true, org.apache.slide.versioncontrol=true, org.apache.slide.debug=false, org.apache.slide.search=true, org.apache.slide.security=true, org.apache.slide.urlEncoding=UTF-8, org.apache.slide.domain=D:/Hyperion/deployments/WebLogic9/SharedServices9/config/Domain.xml}
configURL: file:///D:/Hyperion/deployments/WebLogic9/SharedServices9/config/CSS.xml
Done initialize: com.hyperion.css.CSSAPIImpl@283baf
connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@27efaa
connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@454a3b
CMSOfflineServlet Initialized
Adding audit listener
Shared Services Initialized Successfully
<22-Oct-2010 10:26:56 o'clock BST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<22-Oct-2010 10:26:56 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<22-Oct-2010 10:26:56 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<22-Oct-2010 10:26:57 o'clock BST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias hyperion from the jks keystore file D:\hyperion_SSL_Repository\hyperion.jks.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\bea\JROCKI~1\jre\lib\security\cacerts.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.86.57.43:28443 for protocols iiops, t3s, ldaps, https.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.87.248.108:28443 for protocols iiops, t3s, ldaps, https.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 127.0.0.1:28443 for protocols iiops, t3s, ldaps, https.>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "127.0.0.1", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "LGWHYPWEB.uk.baa.com", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "SharedServices9" for domain "WebLogic9" running in Production Mode>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "LGWWEB026.uk.baa.com", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<22-Oct-2010 10:27:08 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
<22-Oct-2010 10:28:36 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwdbs026.uk.baa.com - 10.86.41.33 instead of an SSL handshake.>
22-Oct-2010 10:28:38, /files, HEAD, 401 "Unauthorized", 125 ms, %v
22-Oct-2010 10:28:38, /files, HEAD, 200 "OK", 266 ms, %v
22-Oct-2010 10:28:40, /files, HEAD, 401 "Unauthorized", 16 ms, %v
22-Oct-2010 10:28:41, /files, HEAD, 200 "OK", 94 ms, %v
22-Oct-2010 10:28:42, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:42, /files, HEAD, 200 "OK", 93 ms, %v
22-Oct-2010 10:28:43, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:43, /files, HEAD, 200 "OK", 94 ms, %v
22-Oct-2010 10:28:44, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:44, /files, HEAD, 200 "OK", 78 ms, %v
22-Oct-2010 10:28:45, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:45, /files, HEAD, 200 "OK", 93 ms, %v
22-Oct-2010 10:28:47, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:47, /files, HEAD, 200 "OK", 78 ms, %v
22-Oct-2010 10:28:48, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:48, /files, HEAD, 200 "OK", 78 ms, %v
<22-Oct-2010 10:29:40 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwapp026.uk.baa.com - 10.86.51.104 instead of an SSL handshake.>
<22-Oct-2010 10:30:16 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwapp026.uk.baa.com - 10.86.51.104 instead of an SSL handshake.>
<22-Oct-2010 10:32:25 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
22-Oct-2010 10:32:43, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:32:43, /files, HEAD, 200 "OK", 78 ms, %v
22-Oct-2010 10:32:44, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:32:44, /files, HEAD, 200 "OK", 63 ms, %v
22-Oct-2010 10:32:45, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:32:45, /files, HEAD, 200 "OK", 63 ms, %v
<22-Oct-2010 10:32:46 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
<22-Oct-2010 10:34:00 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
<22-Oct-2010 10:35:28 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
log dir isD:\Hyperion\logs\SharedServices9
urlManifest zip:D:/Hyperion/deployments/temp/servers/SharedServices9/tmp/_WL_user/interop/tthmcu/war/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
Shared Services Version: 11.1.1.3.24
Shared Services Drop Number: 6
Populating Application Info
Getting LCM callback info from Registry for product: HUB
LCM Callback: https://LGWWEB026.uk.baa.com:28443/interop/framework/lcm/HSSMigration
Populating Product Info
Thanks in advance
Edited by: 790426 on 25-Oct-2010 06:17

You must first check if you have configured the web server to include the hfm/planning products.
Then you can refer to the thread below:
Not able to see Consolidation Administration
The latter definitely applies to version 9.3.1, but it could be helpful.

Unable to access/lan2lan ping from VPN Fortigate to Cisco ASA 5505

Problem : Unable to access user A to user B
User A --- router A (122, fortigate 80c) --- (Site to Site VPN between fortigate & cisco asa) --- router B (93, cisco Asa 5505{in front asa got cisco800[81] before to internet} ) --- User B
After using wizard to configure the cisco ASA site to site VPN, the site-to-site tunnel is up.
Ping is unsuccessful from user A to user B
Ping is successful from user B to user A, data is accessable
After done the packet tracer from user A to user B,
Result :
Flow-lookup
Action : allow
Info: Found no matching flow, creating a new flow
Route-lookup
Action : allow
Info : 192.168.5.203 255.255.255.255 identity
Access-list
Action : drop
Config Implicit Rule
Result - The packet is dropped
Input Interface : inside
Output Interface : NP Identify Ifc
Info: (acl-drop)flow is denied by configured rule
Below is Cisco ASA 5505's show running-config
ASA Version 8.2(1)
hostname Asite
domain-name ssms1.com
enable password ZZZZ encrypted
passwd WWWW encrypted
names
name 82 B-firewall description Singapore office firewall
name 192.168.1.0 B-inside-subnet description Singapore office internal LAN IP
name 192.168.200.0 A-inside-VLAN12 description A-inside-VLAN12 (fortinet)
name 192.168.2.0 fw-inside-subnet description A office internal LAN IP
name 122 A-forti
interface Vlan1
nameif inside
security-level 100
ip address 192.168.5.203 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 93 255.255.255.240
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name ssms1.com
object-group network obj_any
network-object 0.0.0.0 0.0.0.0
access-list inside_nat0_outbound extended permit ip any 80 255.255.255.240
access-list inside_nat0_outbound extended permit ip fw-inside-subnet 255.255.255.0 B-inside-subnet 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.5.0 255.255.255.0 A-inside-VLAN12 255.255.255.0
access-list outside_cryptomap extended permit ip fw-inside-subnet 255.255.255.0 B-inside-subnet 255.255.255.0
access-list Outside_nat-inbound extended permit ip A-inside-VLAN12 255.255.255.0 192.168.5.0 255.255.255.0
access-list Outside_nat-inbound extended permit ip host A-forti 192.168.5.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.5.0 255.255.255.0 A-inside-VLAN12 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-631.bin
no asdm history enable
arp timeout 14400
global (outside) 101 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 101 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 81 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http B-inside-subnet 255.255.255.0 inside
http fw-inside-subnet 255.255.255.0 inside
http 0.0.0.0 255.255.255.255 outside
http 0.0.0.0 0.0.0.0 outside
http 192.168.5.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer A-forti
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map 2 match address outside_cryptomap
crypto map outside_map 2 set peer B-firewall
crypto map outside_map 2 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 20
authentication pre-share
encryption aes-192
hash md5
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption aes-256
hash md5
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 192.168.5.10-192.168.5.20 inside
dhcpd dns 165 165 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
username admin password XXX encrypted privilege 15
tunnel-group 122 type ipsec-l2l
tunnel-group 122 ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
class-map outside-class
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
message-length maximum client auto
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
policy-map outside-policy
description ok
class outside-class
inspect dns
inspect esmtp
inspect ftp
inspect h323 h225
inspect h323 ras
inspect icmp
inspect icmp error
inspect netbios
inspect rsh
inspect rtsp
inspect sip
inspect skinny
inspect sqlnet
inspect sunrpc
inspect tftp
inspect xdmcp
service-policy global_policy global
service-policy outside-policy interface outside
prompt hostname context
Cryptochecksum: XXX
: end
Kindly need your expertise&help to solve the problem

any1 can help me ?

"Unable to Access" error msg for BI Publisher Report

Hello All,
I am getting the following error when trying to access a BI Publisher report from the dashbaord. We can access the folders that come with BI Publisher examples, ie Executives, Financials, HR Manager but not the "GTR" that we have created.
Privelleges are the same. The folders have the same rights too.
This is for OBIEE 10.1.3.4 with BI Publisher of the same version, running on a solaris box.
Any thoughts.
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.generalException
faultSubcode:
faultString: Unable to access/Report not found: /GTR/Testing/QTD/QTD.xdo
faultActor:
faultNode:
faultDetail:
     {}oracle.apps.xdo.service.server.XMLPServiceException:null
     {http://xml.apache.org/axis/}exceptionName:oracle.apps.xdo.service.server.XMLPServiceException
     {http://xml.apache.org/axis/}hostname:jrc1vmsuapptst03
Unable to access/Report not found: /Grand Total Reports/Combined PNL/QTD/QTD.xdo
     at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:221)
     at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:128)
     at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
     at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
     at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
     at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
     at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
     at org.apache.axis.Message.getSOAPEnvelope(Message.java:424)
     at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
     at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
     at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
     at org.apache.axis.client.Call.invoke(Call.java:2748)
     at org.apache.axis.client.Call.invoke(Call.java:2424)
     at org.apache.axis.client.Call.invoke(Call.java:2347)
     at org.apache.axis.client.Call.invoke(Call.java:1804)
     at com.oracle.xmlns.oxp.service.report.xmlp.XMLPServiceSoapBindingStub.getReportMetadata(XMLPServiceSoapBindingStub.java:633)
     at com.siebel.analytics.web.sawreporting.XmlPublisherRpcGetReportMetadata.processMessageInternal(XmlPublisherRpcGetReportMetadata.java:91)
     at com.siebel.analytics.javahost.AbstractRpcCall.processMessage(AbstractRpcCall.java:107)
     at com.siebel.analytics.javahost.MessageProcessorImpl.processMessage(MessageProcessorImpl.java:175)
     at com.siebel.analytics.javahost.Listener$Job.run(Listener.java:223)
     at com.siebel.analytics.javahost.standalone.SAJobManagerImpl.threadMain(SAJobManagerImpl.java:205)
     at com.siebel.analytics.javahost.standalone.SAJobManagerImpl$1.run(SAJobManagerImpl.java:153)
     at java.lang.Thread.run(Thread.java:595)

more info...
when i create a new folder in Publisher, I also get the same error msg.

I am unable to access my digital editions library on a new computer with my existing account, it shows that my library is empty?

I am unable to access my digital editions library on a new computer with my existing account, it shows that my library is empty? Can anyone offer a suggestion to fix this?

If you have given correct info about you ios 6.1.3 - all you need to do is delete account. You will be able to sign in with new one afterwards. Make sure you don't delete any info when you see those prompts.

ASA 5505 unable to access ASDM ( just needs some ports ope and FWDing setup)

I was able to access the ASDM launcher in the browser yesterday   via    https://192.168.111.1/admin and I was stuck there as the browser version says that my ASA image does not work with my ASDM version...      So i tried some trouble shooting and think that i may have changed the image to an image that does not exist.     (I'm not sure where it is that I would actually place that image either)    Now i am unable to access through the browser at all.
Anyways, I am ok with SSH/CLI and have been using my firewall in this manner.   I am walking into this companies current configuration and simply need to do the following:
I need to OPEN ports 9000, 85, 40085, 49005 so that my mobile device can pull my security cameras in the office
I need to set port forwarding so that any connections that hit outside-in ip address 205.214.36.53:1610 >>> http://192.168.111.30:1610/AndroidWS/     for our new mobile CRM.
I have been through some of your related discussions and am falling short somewhere.   Please help
here is my "show run" and my "dir"
ciscoasa(config)# show run
: Saved
ASA Version 9.0(2)
hostname ciscoasa
domain-name scec.local
enable password ol40hHpZTtZQFXMJ encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ol40hHpZTtZQFXMJ encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif INSIDE
security-level 100
ip address 192.168.111.1 255.255.255.0
interface Vlan2
nameif OUTSIDE
security-level 0
ip address 205.214.236.50 255.255.255.240
boot system disk0:/asa902-k8.bin
boot system disk0:/asa825-k8.bin
boot system disk0:/asa831-k8.bin
ftp mode passive
dns domain-lookup INSIDE
dns domain-lookup OUTSIDE
dns server-group DefaultDNS
name-server 192.168.111.50
name-server 8.8.8.8
domain-name scec.local
object network LAN
subnet 192.168.111.0 255.255.255.0
object network SERVER1
host 192.168.111.50
object network SERVER1_PUBLIC
host 205.214.236.51
object network SERVER2
host 192.168.111.20
object network SERVER2_PUBLIC
host 205.214.236.52
object network SERVER3
host 192.168.111.30
object network SERVER3_PUBLIC
host 205.214.236.53
object network SERVER4
host 192.168.111.40
object network SERVER4_PUBLIC
host 205.214.236.54
object network SERVER5
host 192.168.111.10
object network SERVER5_PUBLIC
host 205.214.236.55
object-group service SERVER1_PORTS tcp
port-object eq www
port-object eq https
port-object eq smtp
port-object eq pop3
port-object eq imap4
port-object eq 3389
object-group service SERVER2_PORTS tcp
port-object eq 3389
object-group service SERVER3_PORTS tcp
port-object eq 3389
object-group service SERVER4_PORTS tcp
port-object eq 3389
object-group service SERVER5_PORTS tcp
port-object eq 3389
port-object eq www
port-object eq https
access-list OUTSIDE_IN extended deny ip 10.0.0.0 255.0.0.0 any log
access-list OUTSIDE_IN extended deny ip 172.16.0.0 255.240.0.0 any log
access-list OUTSIDE_IN extended deny ip 192.168.0.0 255.255.0.0 any log
access-list OUTSIDE_IN extended deny ip 127.0.0.0 255.0.0.0 any log
access-list OUTSIDE_IN extended deny ip 0.0.0.0 255.255.255.0 any log
access-list OUTSIDE_IN extended deny ip 244.0.0.0 255.255.255.240 any log
access-list OUTSIDE_IN extended deny ip host 255.255.255.255 any log
access-list OUTSIDE_IN extended permit icmp any any echo-reply
access-list OUTSIDE_IN extended permit icmp any any time-exceeded
access-list OUTSIDE_IN extended permit icmp any any unreachable
access-list OUTSIDE_IN extended permit tcp any object SERVER1 object-group SERVER1_PORTS
access-list OUTSIDE_IN extended permit tcp any object SERVER2 object-group SERVER2_PORTS
access-list OUTSIDE_IN extended permit tcp any object SERVER3 object-group SERVER3_PORTS
access-list OUTSIDE_IN extended permit tcp any object SERVER4 object-group SERVER4_PORTS
access-list OUTSIDE_IN extended permit tcp any object SERVER5 object-group SERVER5_PORTS
access-list inside-out extended permit ip any any
pager lines 24
logging asdm informational
mtu INSIDE 1500
mtu OUTSIDE 1500
ip audit name OUTSIDE_ATTACK attack action alarm drop
ip audit name OUTSIDE_INFO info action alarm
ip audit name INSIDE_ATTACK attack action alarm drop reset
ip audit name INSIDE_INFO info action alarm
ip audit interface INSIDE INSIDE_INFO
ip audit interface OUTSIDE OUTSIDE_INFO
ip audit interface OUTSIDE OUTSIDE_ATTACK
ip audit signature 2000 disable
ip audit signature 2001 disable
ip audit signature 2004 disable
ip audit signature 2005 disable
ip audit signature 6051 disable
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-509.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (INSIDE,OUTSIDE) source static SERVER1 SERVER1_PUBLIC
nat (INSIDE,OUTSIDE) source static SERVER2 SERVER2_PUBLIC
nat (INSIDE,OUTSIDE) source static SERVER3 SERVER3_PUBLIC
nat (INSIDE,OUTSIDE) source static SERVER4 SERVER4_PUBLIC
nat (INSIDE,OUTSIDE) source static SERVER5 SERVER5_PUBLIC
object network LAN
nat (INSIDE,OUTSIDE) dynamic interface
access-group inside-out in interface INSIDE
access-group OUTSIDE_IN in interface OUTSIDE
route OUTSIDE 0.0.0.0 0.0.0.0 205.214.236.49 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authentication enable console LOCAL
aaa authorization exec LOCAL
http server enable
http 0.0.0.0 0.0.0.0 INSIDE
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 INSIDE
ssh 0.0.0.0 0.0.0.0 OUTSIDE
ssh timeout 5
ssh version 2
console timeout 0
dhcpd option 3 ip 192.168.111.1
dhcpd address 192.168.111.100-192.168.111.200 INSIDE
dhcpd dns 192.168.111.50 8.8.8.8 interface INSIDE
dhcpd enable INSIDE
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username wti password OIEBfkGT1DRShCnN encrypted privilege 15
username admin password g/t7o/eHDKMomDrS encrypted privilege 15
username vpnuser password 8DcFkqJ9hi39UQw. encrypted privilege 15
username sysadmin password mi1AUI982JWkJuWt encrypted
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:6dd04d2527e7929343ebd090969e18a1
: end
ciscoasa(config)# dir
Directory of disk0:/
148    -rwx 15390720     09:08:54 Jul 31 2013 asa825-k8.bin
149    -rwx 27611136     09:43:48 Oct 31 2013 asa902-k8.bin
150    -rwx 2048         00:00:00 Jan 01 1980 FSCK0000.REC
20     drwx 2048         09:12:16 Jul 31 2013 coredumpinfo
151    -rwx 16280544     09:14:46 Jul 31 2013 asdm-645.bin
10     drwx 2048         09:19:42 Jul 31 2013 log
19     drwx 2048         09:20:08 Jul 31 2013 crypto_archive
153    -rwx 14240396     14:14:18 Jun 11 2014 asdm-631.bin
154    -rwx 4096         00:00:00 Jan 01 1980 FSCK0001.REC
155    -rwx 12998641     09:20:28 Jul 31 2013 csd_3.5.2008-k9.pkg
156    drwx 2048         09:20:30 Jul 31 2013 sdesktop
157    -rwx 6487517      09:20:32 Jul 31 2013 anyconnect-macosx-i386-2.5.2014-k9.pkg
158    -rwx 6689498      09:20:36 Jul 31 2013 anyconnect-linux-2.5.2014-k9.pkg
159    -rwx 4678691      09:20:38 Jul 31 2013 anyconnect-win-2.5.2014-k9.pkg
160    -rwx 4096         00:00:00 Jan 01 1980 FSCK0002.REC
161    -rwx 4096         00:00:00 Jan 01 1980 FSCK0003.REC
162    -rwx 4096         00:00:00 Jan 01 1980 FSCK0004.REC
163    -rwx 6144         00:00:00 Jan 01 1980 FSCK0005.REC
164    -rwx 6144         00:00:00 Jan 01 1980 FSCK0006.REC
165    -rwx 6144         00:00:00 Jan 01 1980 FSCK0007.REC
166    -rwx 22528        00:00:00 Jan 01 1980 FSCK0008.REC
167    -rwx 38912        00:00:00 Jan 01 1980 FSCK0009.REC
168    -rwx 34816        00:00:00 Jan 01 1980 FSCK0010.REC
169    -rwx 43008        00:00:00 Jan 01 1980 FSCK0011.REC
170    -rwx 2048         00:00:00 Jan 01 1980 FSCK0012.REC
171    -rwx 26624        00:00:00 Jan 01 1980 FSCK0013.REC
172    -rwx 2048         00:00:00 Jan 01 1980 FSCK0014.REC
173    -rwx 26624        00:00:00 Jan 01 1980 FSCK0015.REC
174    -rwx 2048         00:00:00 Jan 01 1980 FSCK0016.REC
175    -rwx 2505         09:46:08 Oct 31 2013 8_2_5_0_startup_cfg.sav
176    -rwx 1189         09:46:12 Oct 31 2013 upgrade_startup_errors_201310310946.log
177    -rwx 100          16:42:40 Jun 10 2014 upgrade_startup_errors_201406101642.log
178    -rwx 100          14:52:26 Jun 11 2014 upgrade_startup_errors_201406111452.log
127004672 bytes total (21886976 bytes free)
Please let me know if you need any other information from me so that i can get our mobile devices to connect to the new CRM from outside the network and allow the owner access on his mobile device to the company cameras.
************** (NOTE: I can do both of these things currently from within the network without any issues)*************
THANKS

Jgreene -
This doesn't specifically answer your question, but if you want to get ASDM functionality back you need to load a newer version onto flash memory and then point the ASA to that with the configuration command:
asdm image disk0:/asdm-version.bin
You are running  ASA Version 9.0(2) so you need at least version 7 of ASDM to support that. Interestingly enough your "asdm image" statement in your config points to asdm-509.bin and you have asdm-631.bin and asdm-645.bin on flash. None of those will work. I suggest loading up asdm-721.bin and changing the asdm image statement accordingly. I am pretty sure a reboot is required after that is done.
Good Luck!
-Jeff

I am unable to access any of my ebooks in adobe after I had help this morning

I am unable to access any of my ebooks in adobe after I had help this morning

Hi, Thank you so much for the info.... I really do appreciate it. We had the laptop updated by way of a system upgrade with RAM and an additional SSD drive. Once reconfigured all programs were reinstalled but Iphoto is not among them. Iphoto was on the laptop when purchased so we have no additional discs. Before the laptop was updated we backed the photos up to an extrenal hard drive so we have them, but cant access them. Could I purchase Iphoto 8 stll? Would this work? We would also require an external CD drive as we no longer have the disc drive in the laptop (I think the extra new bits took over). You may have noticed I have very limited knowledge on computers so any help dispite how simple it may sound to some would help me greatly. I just want all my photos back .... Thanks inadvance... Hope to hear soon x

Ora:12705 unable to access NLS data files or invalid environment specified

Hi All,
In our BW production SAP standard job DBA:update_stats is failing . In Job log we found that the info like
Ora:12705 unable to access NLS data files or invalid environment specified.
Connect to DB instance failed.
Brconnect terminated with exit code 3.
We are on Oracle 10.2 BW 3.5 Sunsolaris 5.10
The Env is as below:
HOME=/home/bwpadm
PATH=/oracle/BWP/102_64/bin:/usr/jdk/j2sdk1.4.2_13/bin:/home/bwpadm:/usr/sap/BWP/SYS/exe/run:/etc:/usr/bin:.:/opt/EMCpower/bin/64:/etc/emc/bin:/usr/ccs/bin:/usr/ucb:/usr/openwin/bin
LOGNAME=bwpadm
HZ=
TERM=vt100
SHELL=/bin/csh
MAIL=/var/mail/bwpadm
TZ=US/Pacific
PWD=/home/bwpadm
USER=bwpadm
SAPSYSTEMNAME=BWP
DIR_LIBRARY=/usr/sap/BWP/SYS/exe/run
LD_LIBRARY_PATH=/usr/sap/BWP/SYS/exe/run:/opt/j2sdk1.4.2_08/bin
JAVA_HOME=/usr/jdk/j2sdk1.4.2_13
THREAD=NOPS
dbms_type=ORA
dbs_ora_tnsname=BWP
dbs_ora_schema=SAPBWP
ORACLE_PSRV=BWP
ORACLE_SID=BWP
DB_SID=BWP
ORACLE_HOME=/oracle/BWP/102_64
ORACLE_BASE=/oracle
ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data
NLS_LANG=AMERICAN_AMERICA.WE8DEC
SAPDATA_HOME=/oracle/BWP
Plz suggest what we have to change to fix the problem.
Thanks,
Subhash.G

Thanks for the reply,
The below is the orasid env:
As you suggest we found ld_library_path is not set to oracle client .
we still using 9.x client shall we add that path to the above varaible.
Please suggest..
HOME=/oracle/RSS
PATH=/oracle/RSS/102_64/bin:/oracle/RSS:/usr/sap/RSS/SYS/exe/run:/etc:/usr/bin:.:/opt/EMCpower/bin/64:/etc/emc/bin:/usr/ccs/bin:/usr/ucb
LOGNAME=orarss
HZ=
TERM=vt100
SHELL=/bin/csh
MAIL=/var/mail/orarss
TZ=US/Pacific
PWD=/oracle/RSS/102_64/dbs
USER=orarss
SAPSYSTEMNAME=RSS
DIR_LIBRARY=/usr/sap/RSS/SYS/exe/run
LD_LIBRARY_PATH=/usr/sap/RSS/SYS/exe/run:/oracle/RSS/102_64/lib
THREAD=NOPS
dbms_type=ORA
dbs_ora_tnsname=RSS
dbs_ora_schema=SAPRSS
ORACLE_SID=RSS
DB_SID=RSS
ORACLE_BASE=/oracle
ORACLE_HOME=/oracle/RSS/102_64
NLS_LANG=AMERICAN_AMERICA.UTF8
SAPDATA_HOME=/oracle/RSS.
Thanks,
Subhash.G

Unable to access iTunes U as an administrator

Built out an iTunes U site for my college, but I'm now unable to access the site as an administrator. When I use the log-in process Middlebury set up, with my correct Middlebury user name and password, I go to the iTunes U site, but do not have access to the admin screens that I have used in the past. Other administrators at the college have no such problem. No one here at the college can solve this problem. Any thoughts from Apple or other users?
I do seem to have two sets of log-in info for iTunes, one associated with a Middlebury College e-mail address, one with a Gmail account. Could this be the problem? If so, is there a way to purge one account?
Tim Etchells
[email protected]

Hi Ashish,
If the portal installation is on a dual stack installation(server with ABAP and JAVA Stack on the same server), then the default j2ee admin user is j2ee_admin.If it is on pure java stack installation, the j2ee admin user is administrator.For the dual stack installations, SAP* user would be there for ABAP administration.
If you are going to configure the Portal for UME as ABAP datasource, then make it sure that the same admin and guest users are not there both on the portal server and ABAP server.If the same users ids are on both servers, then you will not be able to login on to the portal server using that particular user ID. Unique user ids should be maintained if you are planning for UME as ABAP Datasource.
Just refer this note for getting details on supporting datasource changes. note number - 718383. In this note, it is clearly mentioned that, if you have already changed the datasource to ABAP, then we will not be able to revert it back to original state.So be aware before doing the datasource change.
Just refer this forum for further clarifications on UME as ABAP datasource and regarding SSO especially with this configuration. I have mentioned i clearly in this thread.
Re: EP User Creation through SAP ECC
Regards,
Kishor Gopinathan

Quicken is unable to access financial info

Similar Messages

Maybe you are looking for