Quickest way to send a small part of video to someone

I'm looking for the fastest way to send a small section of my Motion5 video to someone for approval.
I find the "Share | Export Selection to Movie..."
I click it & it does nothing;absolutely nothing.
To my mind, a selection in this context, is a Play Range. I have one set.
I looked up the manual, it says "Exports the current selection..."
So, in the context of Motion5 (where a selection to export can only mean some limitation of time on the timeline) what exactly is a selection and how do you do it?
Failing this, assuming we're editing in ProRes, it would be nice to know the "fastest possible" encoding option amongst all and any of the options.
I've tried a whole bunch, but I'm usually left sitting around for 15 minutes to encode a 1-minute video (on my iMac i3 3.2Ghz with 12GB RAM)

As far as I know, in Motion 5 “Export Selection to Movie” means selected objects,
not range, time etc...
Select your objects either in the Layers or in the Timeline...
(if nothing is selected “Export Selection to Movie” won’t work)...
Otherwise, use “Export Movie” to export the whole Timeline...
Either shorten the project before exporting...
Or, set In and Out Points... from the Duration drop-down choose In/Out Points...
Or, export to “Apple Devices” with In/Out Points selected..
Or, share as Email... this is fast with a very small file size...
Regards
Nolan

Similar Messages

Any way to pixelate a small part of video?

There's some brief nudity in my video- I want to keep the clip but not show the "parts". Any way to pixelate a small area?

Yes,
You can use GeeThree's Slick volumes Volume 6 has the option of hilite obscure that even moves with your video. You can preview all of the Slick effects on the website.
You also might want to look at cf/x's imovie plugins and use their 'pixelate' option that can pixelate the whole clip or just part of it.
If you nude character is moving, GeeThree's option might be better, but cf/x is less expensive if you only need the one effect.

When previewing images by clicking on the thumbnail in an Event for example, I've been finding that many images preview in a 'zoomed in' way so only a small part of the photos is previewed in a highly magnified view.

When previewing images by clicking on the thumbnail in an Event for example, I've been finding that many images preview in a 'zoomed in' way so only a small part of the photos is previewed in a highly magnified view.
Initially I could find no cause. Then I tried right click - Edit and on the affected images, always get this warning:
"Image Cannot Be Edited - This photo was previously edited with another application or with an early version of Iphoto. Duplicate this photo to edit it." and a "Duplicate To Edit" Button is displayed.
The external Editor defined for iPhoto is Adobe Photoshop Elements.
Now, I reckon the MUST be others out there affected by this same apparent Preview bug, yet my searches have not revealed any answers. Also seems impossible to find a contact number for adobe???
Thanks

Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift ''(Mac Options)'' >''' key, and then starting Firefox. Is the problem still there?

HT1349 what is the quickest way to move all my iTunes music, video, etc. to a new computer? any help would be appreciated. thanks. p.s. i purchased a belkin transfer cable - will that work?

hi - i'm a newbie - what is the quickest way to move all my iTunes music, video, etc. to a new computer? any help would be appreciated. thanks.
p.s. i purchased a belkin transfer cable - will that work? i have an iPod Touch.

You copy it from one computer to the other.
Type "move itunes library" into the google search bar.
You have posted in the iphone forum.

Is Cirrus the only way to send only small text message ?

I'm a retired high school teacher and I'm actually developing a small tablet app for helping students in science. The student app is done. But I would like that the app could be use in class and for that, I would like the develop a teacher app. I only want that the teacher app sees who is online and receive feedback of the students progress. The communication needs only to go one way. The teacher app acts like a server. Is it possible to create a server app for tablet or Cirrus is required. If you can help me with that problem. I actually work with Flash CC and adobe Air 4.
Gaetan Veilleux

Hi Michael,
I want to thank you for the hint.
RTMFP works very fine for my project and better then I was expected.
Without your help, I think that I would never be able to do that. I used to teach science and chemistry in a high school for 33 years and I started to code only few years ago. But I continue to teach through my applications.
The only thing that didn’t work is the «NetGroup.Neighbor.Disconnect» that is not send from an iPad even if we close the application.
So if you can help me with that I will appreciate. If you can’t, it’s OK ! Nothing is perfect. It’s only an old reflex of teacher that wants to know if the students try to go on Facebook or …
Excuse my English, I'm a French Canadian but I have a friend that will help me to translate my app in English and I will let you when it will be available.
So thank a lot again and again,
Gaétan Veilleux

I put together and sent 10 pictures from my granddaughter's birthday party. Is there a way of sending them with a link recipients can click on, rather than having all the pictures download as part of the email message?

I put together and sent 10 pictures from my granddaughter's birthday party. Is there a way of sending them with a link recipients can click on, rather than having all the pictures download as part of the email message?

Hello userlarry, do you have Mobile Me? You could use that. Or you could compress them, you would still need to send them in an email, but it would help with size limitations of emails.
To compress them, put them in a folder and right click on the folder. You should see a Compress option. Then just drag the .zip file into your mail.
Regards,
Graham

The window shrinks down and when you expand it the writing isn't there it only shows the small part that does open. Most of the games can't be played this way!

When you click to play the game, the window shrinks down and when you expand it the writing isn't there it only shows the small part that does open. Most of the games can't be played this way, you can't read the chat or access most of the buttons!!! It is just the newest version of Firefox because it works fine on my other computer that hasn't been updated and it also works fine in IE.

See:
*http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
*http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings
* http://kb.mozillazine.org/browser.link.open_newwindow
* http://kb.mozillazine.org/browser.link.open_newwindow.restriction

JEditorPane: how to replace small parts of the document?

Hi
Im trying to create an application that will allow two people to type into two different JEditorPanes, but have the two people essentially editing the same document. So if one person types someting into thier frame, I want that modification sent to the other frame as well.
The problem I've come across is how to make changes to the contents of the frame without interfering with the person whos trying to type into it. That problem boils down to how do you replace only a small part of the document whithout taking control of the users caret?

Hopfully I got your problem right. To change only small parts of the EditorPane's document should not be the probelm you can get it with EditorPane.getDocument(). But I think you have to take control over the caret, because the when user 1 has finished editing and sends the doc to user 2 who is editing the doc, user 2's caret position will change because the document length has changed.
The easiest way would be to add an input area (TextArea) for each user where they can type theit text and than to add the text into the document when they press enter, so you don't have the trouble with te caret position. If you don't want to do this then you could try that: the input of the users is cached while they are typing (not changing the doc) till they press enter. Then the doc is send to the other user, the users doc in the pane is updated and his current typing is added to the end of the new received doc. You can figure out the correct position by doc.getLength() and set the new caret position to doc.length + currentTyping.length
Hope that helps
Eryk

Is there any way to send a DDP over the internet?

Is there any safe way to send a DDP over the interent without loosing anything?
Any suggestion welcome, thanks !
I think Wamnet doesn`t do this anymore (?)

well, i recently FTP'd a DDP to my favourite plant, and it took about 6 hours to upload. (I can only go up at about 100KB/S.)
It was a job for them (i'm so lucky to have a replicator that calls me when one of their clients has a problem), and i could convince them to use their FTP server (that they have never opened to third parties). So that was free...
I could (or a courier) drive there in an hour and a half, but i rather not pay for a courier(about 100 euros) to do so, and sending a disc by snail mail takes overnight... (In this case i did not trust the FTP so i both snail mailed a pocket drive as well as FTP). The plant ended up using the FTP version as it was there earlier. Besides that, they also checke the drive and it failed
I did not zip the image (takes a long time, it does not get smaller), i trust the DDP to be in a rock solid format anyway.
But you can always FTP a small project. Any plant uses verification software and it will take just a few minutes to see if there is any corruption during the transfer.
hth
Bouke

Creation of staging table - quickest way.

Hi,
I need to create a staging table with roughly 370 fields. The sources' specs are not clear and some of the staging table's fields, too. So effectively, first of all I need to understand the staging fields and the source fields. The end user has been given some target date with some generic guess-work (not by me).
I would like to know the best approach to complete the activity quicker - at least, document all the staging fields and source fields. What I have now is one Excel file with four columns - Staging Field, Source table and field, Staging Field Type and Staging Field Length. Out of the total 370 staging fields, I have just completed 50% and the target date is approaching faster - I have not touched developing Oracle package yet.
This could be a generic question, but in order to meet deadline, could you please throw some light on the quickest way/tips to complete the mapping documentation (or creating the staging table)?
Thanks in advance,
Manoj.

MDixit wrote:
Hi,
I need to create a staging table with roughly 370 fields. The sources' specs are not clear and some of the staging table's fields, too. So effectively, first of all I need to understand the staging fields and the source fields. The end user has been given some target date with some generic guess-work (not by me).
I would like to know the best approach to complete the activity quicker - at least, document all the staging fields and source fields. What I have now is one Excel file with four columns - Staging Field, Source table and field, Staging Field Type and Staging Field Length. Out of the total 370 staging fields, I have just completed 50% and the target date is approaching faster - I have not touched developing Oracle package yet.
This could be a generic question, but in order to meet deadline, could you please throw some light on the quickest way/tips to complete the mapping documentation (or creating the staging table)?
Thanks in advance,
Manoj.The first thing that comes to mind is the unclear specifications. (actually the first thing that came to my mind was that tables have columns not fields, but anyway......)
you need to clarify what is coming from the source system before you will be able to intelligently map that to your target system. you may have to push back on your client and tell them that the deadline can't be met unless they provide more information about their source system.
how have they chosen those 370 columns? how did they know these needed to be part of whatever process you are completing? if they know that these need to be moved to a target system then they should be able to tell you why.

Quick way to send photos from Mail

Is there a quick way to send photos from my iphoto library from the Mail application? I heard that 10.5 will have a photo browser as part of email but I was wondering if there is a way in Tiger? Maybe a third party plugin or something like that.

Try this hint from Mac OS X Hints.
Matt

Deskjet 9800 = Print small part of screen

Is there a way to print only a small part of the full screen ?

Hit shift and print screen. open up paint and paste it in, crop it to what you want to print, and print it.
Some of the higher end printers have drivers that will let you print a single frame from a web page (if the web page uses frames), other wise it's the old print screen and crop option.
insert signature here

I have a 4 month long text message thread conversation. What's the quickest way to get to the very beginning of the conversation?

I have a 4 month long text message thread conversation. What's the quickest way to get to the very beginning of the conversation?

The startup.exe file is locate in the \NI-RT\STARTUP directory. 'cd NI-RT' then 'cd STARTUP' should get you to the right place after making the connection with ftp. I don't recognize PH_EXEC.EXE. Logging in as anonymous is fine. I don't recall seeing documentation on the file structure and locations on the module but I'm sure there is some. I just wandered around w/ftp.
The program to update the node should be below. Enter the IP address, the green light will confirm the node is found.
The version function scans the existing startup.exe for a string beginning and ending with " RU Version " and prints everything in between as the version.
The autostart function will copy the existing ni-rt.ini file to your computer, mod
ify the autostart as requested, then put the file back. Leaves the copy on the PC, which can be handy.
Send file will request a file of the format startup*.dat which will be renamed startup.exe and ftp'd to the module. Lets you keep version numbers in the filename on the PC side. Your directory structure probably won't match mine so you'll have to browse for your file.
Reboot module reboots the module.
Hope this is useful, let me know if anything doesn't make sense. Thanks.
Matt
Attachments:
RNconfig.exe ‏855 KB

What's the quickest way to slice up this image...

I found this image and would like to slice it up into separate images. What's the quickest way to do this without having to manally select each one or manually draw slice lines?
My idea was to get them all surrounded by a marquee or path, and then somehow export that marquee or path area into a file.
The first part of creating the marquee and path was easy...
I first surround the entire image with a black border so that it intersects the horizontal black divider lines
I then used the magic want tool to select the black border which also selected the black divider lines
I next inverted the selection... so now all the sections are selected perfectly
Finally I right-clicked on the selection and picked "Make Work Path"
But now how do I export all the work path sections into individual files?
I would appreciate any help or advice... thanks.
-Pete

I was able to do it with a selection I saved named selection for a single frame. Then recording an action that I played moved the selection and played again repeated this till all frames were created. I then deleted the background layer aligned all layer to the top and created a frame animation.
The script export layer to files will create files for each frame.

HT1417 What's the quickest way to delete duplicates without going song by song?

What is the quickest way to delete duplicates from i tunes library without going song by song? I just transferred my music from my ipod classic to my computer and now I have a lot of duplicate music. Most is from CD's I reburned or music I was able to get back on my new computer through I tunes. It is from my personal i pod (one of 4). I finally figured out how to get it off the ipod and back onto my newer computer. I made sure to go to advanced setting and check "keep i tunes folder organized" but it still saved all duplicates.

Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2

Quickest way to send a small part of video to someone

Similar Messages

Maybe you are looking for