Quickfinder Server public user access

Hello,
I have Quickfinder working and most security is set up and working
except, when one loads the search page it defaults to "public access"
and a search with public access displays snippets from restricted
documents (although authentication is requested to view the document).
I have explicitly removed all rights for [public] in the restricted
folder, and set "Check authorization by directory" to "No" for the
virtual server in question.
There doesn't seem to be anything else I can do to prevent these
snippets from being viewed, but it does appear, from what I'm reading,
that this behavior should not occur.
Any suggestions?
Thanks!
- Ken
Ken McLeod
The Delphian School
http://www.delphian.org

Ok, by tweaking some settings, I now get a list of document titles and
an "Unauthorized" message along with them.
Set Rights-based authorization to "by index" and specified a file from
which I specifically removed all rights for [public]. Then I set the
"Unauthorized hits filtered by" to "Templates" and that got me the above
result.
Is it possible to turn it off completely? In other words, instead of
getting a list of hits with "unauthorized" message, just get no hits at all?
Tia,
Ken
Ken McLeod wrote:
> Hello,
>
> I have Quickfinder working and most security is set up and working
> except, when one loads the search page it defaults to "public access"
> and a search with public access displays snippets from restricted
> documents (although authentication is requested to view the document).
>
> I have explicitly removed all rights for [public] in the restricted
> folder, and set "Check authorization by directory" to "No" for the
> virtual server in question.
>
> There doesn't seem to be anything else I can do to prevent these
> snippets from being viewed, but it does appear, from what I'm reading,
> that this behavior should not occur.
>
> Any suggestions?
>
> Thanks!
>
> - Ken
Ken McLeod
The Delphian School
http://www.delphian.org

Similar Messages

Oracle App Server limit user access

Hi guys!
Is there such function in OAS where I can limit a users access to a certain page?
I have registered my users in OID and I want to set limits to specific pages (limiting which user can access which page or not)...
Appreciate any help..

They are different. Oracle Application Server is Oracle's application server prior to the BEA acquisition. WebLogic Server is a completely separate product and will be the strategic application server going forward at Oracle, although Oracle Application Server will still be maintained and supported.

Public users accessing SAP Netweaver Portal

Hi,
We are developing custom web application to be put into SAP Netweaver Portal because we want SAP Netweaver Portal to be our companywide standard platform for web-based application. These web application will be accessed by public users. How this affects SAP Netweaver Portal licensing because public users will access our SAP Netweaver Portal? Thank you.
Rgds,
Hapizorr Rozi Alias

Hi,
I am actually not sure about the general practice here. Since NetWeaver is a single license and it include external facing portal I would almost believe it is included.
I know there are some license rules with Oracle on public internet sites, might be that this is affected to.
But, check with you SAP sales contact.

With Mountain Lion Server, can users access the Messages Server from outside your network?

I would like to setup a new messaging service between my employees because we have issues with most online services. I'm thinking of getting a Mac Mini Server, so I can run Messages Server, but I have an employee outside my network. Can they login to the server remotely to use the Messages Server?
Thanks

If you're talking about setting up and using the Jabber messaging service provided by OS X server then yes, it's really easy to set up and use in and out of the office. The only trick it is, and also most other services, is a correct DNS setup so you're able to connect and use the server from the "outside".
I use this myself (via Lion server rather than Moutain Lion server) from behind a dynamic IP addressed ADSL line and have no problems whatsoever.

Configuring access to Internal server from external source for public users ( DNS HTTP HTTPS FTP )

Hello there :)
i,ve faced a problem as the following :
i,ve internal network ( domain network ) with standlone TMG i want TMG to Allow public users to access
1- web server with load balance on port 5555
2- mail server with HTTPS for OWA
3- DNS to make public users make query to solve Domain name
4- FTP with load balance on port 5555
please anyone can help me with configuring this n make external users access the following mentioned above

Hi,
You could get start from the following blogs.
Microsoft Forefront TMG – Webserver Load Balancing
http://www.isaserver.org/articles-tutorials/configuration-general/Microsoft-Forefront-TMG-Webserver-Load-Balancing.html
Enabling Forms-based Authentication for External and Internal OWA 2010 Users in Exchange 2010 published using Forefront TMG 2010
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/enabling-forms-based-authentication-external-internal-owa-2010-users-exchange-2010-published-using-forefront-tmg-2010-part2.html
TMG Firewall Name Resolution
http://www.isaserver.org/articles-tutorials/installation-planning/TMG-Firewall-Name-Resolution-Part3.html
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Change public share access to read only for public and full access to selected users

Hi, new to the community just purchased a recertified WDMyCloud 2TB after my 2 years old MyBookLive 2TB HD died due to accidental power cable unplugging. I've got everything setup including MiniDLNA by following instructions on this forum and everything is working exactly as I want it to except public share. I want public share to be set to read only access for public and full access to certain users (just myself at the moment) and having a "upload" folder within this share with full public access to everything in this folder would be a bonus. I tried login in to ftp with root user and removing write permission for public but that blocks me out as well. I'm sure it's possible by doing some majic on SSH but I wouldn't have a clue so hoping someone here would be able to help me out.

Mr_Khan wrote:
What i want is public to have read only access to file server. Public as in users who do not have a user account on mycloud. E.g someone who connects to to my home network for the first time and is able to browse and download content from public share. I'm aware of being able to set indivual access to shares for users like full access, read only and no access but public users won't have a user account.Through the My Cloud UI interface what you seek to do is not possible. The public share like all other share folders are an all or nothing affair when using the adminstration UI. When using the administration UI you do not have granular control on shared folders to limit non users to read only access or set permission levels for subfolders. The workaround to do what you seek and have the public folder set for read only is to change the folder settings via SSH. It may take some work to set the folder security so that users can read/write to the public folder while the guests only have read access. However, if you reboot the WD My Cloud or update the WD My Cloud firmware those settings may be reset back to the default settings where the entire public folder is read/write for all. There are way to prevent this but again it will take a bit of coding to do so via SSH. See this link (even though its for the WD My Book Live) for a starting point on how to use SSH to change the permission levels on the public folder. Another option if one doesn't go the SSH route is to turn off public sharing for the public folder then create a "guest" user account and give that "guest" account read only access to the public folder while all other user accounts have full read/write access.

Can't access webacc on server public ip address

This is new server with a fresh SLES11sp2 OES11sp1 install with GW2012 sp2.
All is working well except even a local workstation cannot access webacc using the server public ip. Server is behind a router. Makes no difference if firewalls are on or off. Same issue from a remote workstation on another network, i.e., cannot connect to webacc using the test server's public ip from a browser. Just one nic in the server and one private ip.
FYI, same issue exists for imanager, i.e., no public ip address access even from a local workstation, so I am thinking it may be a SLES network card configuration issue, but that's just because I seem to remember under Netware 6.5 I had to make some inetcfg configurations to relay through the router. Router is an older Linksys WRT610N as this is just a test system for the time being.
I started an SR and they couldn't suggest any fixes other than to tinker with the router. I have both the to default values and open in the router's port forwarding section.
Ideas? Including switching to a newer router (I'm trying to keep it under $300.00) if you have any suggestions. This server will be for no more than 10 workstations local (mixed wireless and wired) and/or remote workstations for very trusted users.
Help Mr. Wizard!!!
thanks.
johnb

On 10/04/2013 16:26, jbeuhler wrote:
> The sp2 is not a typo. I had a SR with a GW2012 sp1 problem during
> install, encountering a "line173 error" involving a python subdirectory,
> even using the --text switch. The engineer (the SR went up) gave me the
> link to try sp2. It installed okay, still a little glitch but I figured
> out how to get around the line 173 error by installing all of the GW
> products one after another without configuring in between product
> installs and then going back to do the product configurations, instead
> of install, configure, etc for each product. The SR said the line 173
> install error is a known error but not currently under review for a
> fix.
>
> If you would pass this post on the beta reporting or send me that
> direction I would appreciate it.
>
>
> I am assuming from your response that my problem is not a recognized
> problem?
I wouldn't assume that but since you're running software that's not
publicly released I'd go back to your SR/contact with this issue.
HTH.
Simon
Novell Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Technology Transfer
Partner (TTP) program. See novell.com/ttp for more details.

Public Folder access on Exch 2007 from exch 2013 user

I have an issue with my test user that I migrated from 2007 to exch 2013 being able to access public folders that reside on the 2007 server. 2007 users accessing public folders on 2007 have no issues. I have it narrowed down to autodiscover. Please see the
below exerpt from autodiscover. The "<PublicFolderServer>ex2013.accessDOMAIN.net</PublicFolderServer>" section shows that autodiscover is giving the name of the exchange 2013 server as the publicfolderserver
instead of the exchange 2007 server. My question is how do I reflect the correct server "Exch2007" on this autodiscover output?
<Account>
      <AccountType>email</AccountType>
      <Action>settings</Action>
      <MicrosoftOnline>False</MicrosoftOnline>
      <Protocol>
        <Type>EXCH</Type>
        <Server>[email protected]</Server>
        <ServerDN>/o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]</ServerDN>
        <ServerVersion>73C0834F</ServerVersion>
        <MdbDN>/o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]/cn=Microsoft Private MDB</MdbDN>
        <PublicFolderServer>ex2013.accessDOMAIN.net</PublicFolderServer>
        <AD>DC.domain.local</AD>
        <ASUrl>https://ex2013.accessDOMAIN.net/EWS/Exchange.asmx</ASUrl>
        <EwsUrl>https://ex2013.accessDOMAIN.net/EWS/Exchange.asmx</EwsUrl>
        <EmwsUrl>https://ex2013.accessDOMAIN.net/EWS/Exchange.asmx</EmwsUrl>
        <EcpUrl>https://ex2013.accessDOMAIN.net/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=domain.local</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=domain.local</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=domain.local</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=domain.local</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=domain.local</EcpUrl-sms>
        <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=domain.local</EcpUrl-publish>
        <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=domain.local</EcpUrl-photo>
        <EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=domain.local</EcpUrl-tm>
        <EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&Title=<Title>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=domain.local</EcpUrl-tmCreating>
        <EcpUrl-tmEditing>?rfr=olk&ftr=TeamMailboxEditing&Id=<Id>&exsvurl=1&realm=domain.local</EcpUrl-tmEditing>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=domain.local</EcpUrl-extinstall>
        <OOFUrl>https://ex2013.accessDOMAIN.net/EWS/Exchange.asmx</OOFUrl>
        <UMUrl>https://ex2013.accessDOMAIN.net/EWS/UM2007Legacy.asmx</UMUrl>
        <ServerExclusiveConnect>off</ServerExclusiveConnect>
      </Protocol>

Thank you for your time. I verified that the build number on outlook is greater than SP1. This would indicate that the hotfix was applied as it was included in cumulative rollups.
The output from the geet-outlookanywhere command is found below. I have adjusted the auth to basic as that is where I would like it to be.
[PS] C:\Windows\system32>Get-Outlookanywhere | fl Identity,*auth*,*hostname,*ssl
Identity                           : Exch07\Rpc (Default Web Site)
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm}
ExternalHostname                   : legacymail.DOMAIN.net
InternalHostname                   : legacymail.DOMAIN.net
ExternalClientsRequireSsl          : True
InternalClientsRequireSsl          : True
Identity                           : Exch13\Rpc (Default Web Site)
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
ExternalHostname                   : webmail.DOMAIN.net
InternalHostname                   : webmail.DOMAIN.net
ExternalClientsRequireSsl          : True
InternalClientsRequireSsl          : True

Non Domain User Access to Report Server

HI Team,
I am Back with another question. These days i am working on SSRS web services as a part of that i need to provide user access to non domain users to the report manager which is residing in a virtual machine and also when i use the report service web service
URL it is asking for virtual machine's windows credentials and as per my client's requirement i should not be prompted with VM'S windows credentials.
Also, we are providing end users with a login page and this login page is connected to a separate User's database in the VM and how to register these non domain users in the report server database
and also reort manager. please help me out of this issue.
Thank you.

Hi NB515,
In Reporting Services, if we connect to Report Manager out of domain, then we need provide a domain username and password can we access to it. If you want to skip this step, you can configure anonymous access for the report server. However,anonymous access
is not recommended as it may give direct access to your report server or report projects to any one who know the URL of your Reporting Services. But in case you still want to try it, you can refer to the link below to see it:
http://blog.quasarinc.com/ssrs/sql-server-reporting-services-2012-anonymous-access/
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Community Support

User Access to Public Folders Disappearing (Outlook 2013)

I have one particular user who is losing access to public folders in Outlook 2013. I have found that going to
File > Account Settings > Account Settings > Email [TAB] > Repair... and then following through that dialog temporarily restores public folder access after restarting Outlook. However, once Outlook is restarted
for 30-60 seconds, the public folders disappear again. This is only happening for this one user. They receive their public folder permissions via group membership. Other group members report no such issue. I had another user with identical permissions
log into the same workstation and they again had no issue.
What could be causing this? This is a particularly bothersome problem since this user happens to be the office scheduler and the calendar they schedule on is public (which, thanks to reduced functionality in Exchange 2013, is no longer accessible in OWA).
Tech specs: Exchange 2013 CU5 accessed from Outlook 2013 running on Windows 8.1 Update. Outlook did not log any events during the time when public folders were dropped, nor are there any network connectivity issues being logged.
Any ideas for resolving this?

Hi,
Please check the connection status for Outlook.
Press the CTRL key and right-click the Outlook icon in the notification area, then select Connection Status.
Please run the command get-mailbox administrator | fl defaul* to check the default public folder mailbox for this affected user.
Do you have mail-enabled public folders? If you have mail-enabled public folders, you can check if this user can view public folders in OWA.
If possible, please re-add the public folder permissions for this user to check result.
Best regards,
Belinda Ma
TechNet Community Support

How to restrict user access in Oracle Application Server 10g (9.0.4)?

Can anybody please let me know how to restrict user access in 10g AS? To be specific, how to allow http requests from specific IPs only?

Hi,
You have to edit httpd.conf and modify acces rights for each protected directory
e.g.
<Directory /var/www/sub/payroll/>
Order allow,deny
Allow from 192.168.1.0/24
</Directory>
then you have to restart Oracle HTTP Server
jm--

Provide WCF service caller to a SQL server that is access by a technical user account

Hi,
we have a WCF Service that is hosted in a windows service and access a SQL Server database. The database is accessed with the technical user the windows service runs with. That means nevertheless of the WCF service caller, the database is always
accessed in context of the technical user. Furthermore some company users access the database via the SQL Management Studio and sign in via Windows Authentication.
The management now wants us to provide a change log functionality. In case data is changed by the WCF service the caller should be logged. In case of using the SQL Management Studio the domain-user's account should be logged.
Because both ways must be supported we want to use a table trigge to monitor insert/update/delete ddl events, but we got struggled by passing the WCF service caller to the SQL server database.
Does anyone have a good idea for the issue? Any advice is appreciated.
Kind regards,
Christian

Do you know a way to use the 'SET CONTEXT_INFO' expression wth LINQ2SQL?
This is a T-SQL forum. There are other forms for LINQ.
No, I don't know LINQ. Then again, why on earth would you? This would be a command you would submit when the WCF connects. Ah, of course, you are only connecting when you submit a query. Which you do through LINQ. Oh well. Could be an incitement to move
away from LINQ maybe? :-)
Erland Sommarskog, SQL Server MVP, [email protected]

Load balancing and clustering for SQL SERVER ANALYSIS SERVER instances to access large number of concurrent users for bi site

HI
how to do analysis server clustering
we have sharepoint bi site and we published many dashboards pointers ,filters kpis
and at a time some 200 to 300 concurrent users access these dashboards pages
so for maintain this requirement how we apply clustering for ssas intances
and also it has load balancing
adil

Hi Adil,
According to your description, you want to implement SQL Server Analysis Services Clusster and Analysis Services Load Balancing, right?
In SSAS, we can design highly available solutions in Analysis Services by using: network load balancing (NLB) technologies, failover clustering technologies, or both. For the details about implemention, please refer to the links below.
http://msdn.microsoft.com/en-us/library/dn736073.aspx
http://sqlsrvanalysissrvcs.codeplex.com/wikipage?title=Analysis%20Services%20Load%20Balancing
http://technet.microsoft.com/en-us/library/bb500217(v=sql.105).aspx
Regards,
Charlie Liao
TechNet Community Support

Our company have just upgraded to iOS 6 and the majority of the users are now receiving the following error 'Cannot Get Mail – Server error. Contact your server administrator' when accessing ms exchange this never happened on iOS 5 can anyone help

Our company have just upgraded to iOS 6 and the majority of the users are now receiving the following error 'Cannot Get Mail – Server error. Contact your server administrator' when accessing ms exchange this never happened on iOS 5 can anyone help

Have you tried deleting the account and re-adding it on the phone?
What version of Exchange server are you running?

Enabling end - user access in Sun One Web Server 6.1 SP2

Hi,
I am new to Sun One Web Server 6.1 SP2 and I can't figure how to enable the end user access so that the end users can change their password.
On iPlanet 6.0 SP2, in the Distributed Admin page, I could enable Distrubuted Administration as well as end user access on the webserver. The end users could then change their own password. I can't find a similar feature in Sun One Web server 6.1 SP2.
Could anyone out there tell me how to get this done?
Thanks in advance!

Hi,
I just found from release notes that End user administration feature (which was under Distributed Administration ) is no longer supported in Sun One Web Server 6.1. [Problem ID 4865295 in release notes]
Could anyone provide a workaround to get over this and allow the end users to change their passwords?
Many thanks in advance,
auporna.

Quickfinder Server public user access

Similar Messages

Maybe you are looking for