Quicklaunge buttons on my HP Pavilion dv7-2260ed not working and always red
The quicklaungebuttons (Mute, Volume, cd options and wireless) on my HP Pavilion dv7-2260ed stopped working and are always red. This happend 3 weeks ago. I runned the HP assistent but no errors were found. Any help is welcome
Hi, I have more or less exactly the same problem.
I own a pavilion dv7 1090eb, which originally had Vista 32bit on it, but I updated to Windows 7 32bit more than a year ago,
not long after 7 was released. Ever since that update (or a few days after, I don't really remember) I've been having problems with the quick launch buttons.
For over a year it was just my mute button that was always orange. I could still mute my sound, but when not muted, it sounded like it was really filtered, all the low and the high were gone, only low mid sounds remained.
My jack exits, both of them, however, still work fine, and I have good audio through external speakers, so I kind of solved that.
But still, the laptop itself has great sound, so I should be able to get that without having to carry around external speakers wherever I go.
Oh and I used to have the same problem with Vista from time to time, but after rebooting it would just go back to normal.
But now just today, I left my laptop on for about 2 hours for some image rendering while I was away, and I switched the wifi off, which I usually do when I leave my laptop unattended. But when I came back, it wouldn't turn back on again, and none of the quick launch buttons worked anymore.
I tried reinstalling all drivers after I did some troubleshooting options which didn't work.
Turned it off and on again a couple of times.
Then found this thread and installed the above link, rebooted, still doesn't work.
What now? What can I do to resolve this problem?
I really hope I can get a solution for this.
Similar Messages
-
Upgraded window from vista to 7 on pavilion DV7 sound not working
Pavilion DV7 1468NR upgraded windows from vista 64 to windows 7 64 sound not working
Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45073.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
If you still have no audio, open windows Control Panel, open Administrative Tools and open Services. Check that the following services are all showing as Status= Started and Start-up Type= Automatic
Audio Service
Multimedia Class Scheduler
Windows Audio
Windows Audio Endpoint Builder
If you need to make a change to any of the above, just right click the service and select Properties, then in the dropdown box next to 'Start-up type', select Automatic and click Apply to save the change. Then click the Start button.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Finger Print problem pavilion dv7-4152si not working
I have a HP Pavilion DV7-4152si and the finger print reader will not work. Notebook was sent for repairs a while back as hard drive crashed when was new and has not worked since.
Hi @Sean-Ireland
Welcome to the HP Support Forums! I saw your post regarding the problems with your fingerprint reader not working. I will be happy to help you with this. Start by installing both your Validity Fingerprint Sensor Driver and the Digital Persona Fingerprint Reader Software. Let me know how it goes.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
HP Pavilion dv7-3165dx heats up and shut's down
My HP Pavilion dv7-3165dx heats up and shut's down/ locks up, It does seem Hot so I'm assuming it's due to heat, or heat related. The Vent's are not blocked and no dust.. This could happen within the first 5 minutes of powering up. I swapped out the hard drive just to be sure it wasn't the Hard drive. any suggestion's or idea's with this brief explanation...
You can chat online with a HP Specialist about your issue and details if your eligible to replace your laptop.
http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-006&h_lang=en&h_cc=au&h_product=top&h_page=hpcom&h_c... -
Hp Pavilion Dv 9000 no audio, quick lunch soft touch not working and no light indicators
Good Evening i have problems with my laptop since it was sent to me without a hard disk drive so i have to buy a new one to make it work, first here are some useful information regarding my laptop.
Hp pavilion dv 9000
OS: Windows Vista Home premium
HDD1: 250Gb
Ram: 1030mb
so when i got the hard disk drive, i installed windows vista as its operating system and so far it worked well, and after that i downloaded drivers from HP's website, with correct laptop model and os, i searched for the most compatible drivers that will make my laptop function 100%
i installed
NVIDIA Chipset driver
Hp Quick lunch buttons
Audio Driver
so after the installation and reboot of my laptop, it seems that only NVIDIA chipset driver worked, the quick lunch buttons are still not working, and also i cannot hear anything comming out of my speaker when i try to play some music, but i hear some loud beeps so it means it is 100% functioning and also i noticed the 3 indicators at the bottom lefot of my laptop for (Power,Charging,Reading) lights are not lighting up.
i tried to uninstall it and install it again just like other blogs says but it doesnt work. . .
i really want to make my laptop fully functional . .
can you help me pleaseHello @iamDestiny ,
Welcome to the HP Forums!
I understand you've installed a new HDD in your notebook and are unable to use the keyboard shortcuts and have no sound from programs on the computer.
It would help to know if you're using a 32 or 64 bit version of Vista. To see which version of Windows you are using click here: Which Windows operating system am I running?
Keep in mind beeps typically come from the onboard BIOS speaker, not the actual speakers. Can you tell me what you do to hear the beeping so we can tell if this is a system beep or a Windows sound? Also, can you tell me if headphones work?
Regarding drivers: I would suggest installing the HP Support Assistant (HPSA) to search for drivers for you. You can download this here: HP Support Assistant. You can see how to use it here: Using HP Support Assistant (Windows 7, Windows Vista).
When you installed Vista did you use the HP recovery CD's or your own copy of Windows?
Let me know the updated info or if the HPSA works.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP. -
I have pavilion dv6 sound not working hp provide new update idt stil not working
HI .
i have pavilion dv6 sound not working hp provide new update idt stil not workingGo to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
Go to Control Panel,Programs & Features-Uninstall IDT software and restart the laptop.Next install using the downloaded file.
```````````````````````````````````````
If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?
- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?
it might be a malfunction in your device. you might ave to send it to repairation
1.ave you try resetting it or restoring it?
2. did your hold boutons whas working beffor? -
my power button is not working and my phone doesn't wanna turn on i've tried to charge it so it can turn on like i usually does but it's not turning on
Hold down on the home button simultaenously holding on the sleep wake button (power button) hold it for more than 15 seconds this will then shut down the device.
If the device is already shut off do this same sequence to see if you get an apple logo. If you get the logo allow the device to login. Write back if this does not resolve your issue.
Good luck Friend. -
he menu button of the ipod touch (4th generation) is not working and the service center of ipod is asking us to pay for the fixation of the said item even though it's still on warranty. this is the case number 215866894. And the service center said that they don't cover that center part of the ipod so they're asking us money before they can fix it. We bought the ipod last december 8, 2010 and we brought it to the service center last april, 2011 here in the philippines. And until now they're not fixing it because they're asking us to pay half the price of the item which is 8,040 pesos..
As advised, you need to call Apple about this.
http://support.apple.com/kb/HE57
No one here works for Apple (no one who will reply, anyway) so there's nothing anyone here can do to help you with this issue.
Good luck. -
Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go. it worked, but only for those with adobe pro. i could not get it to work with reader. is there a way i can make it work for reader?
Noted.
The LiveCycle user to user forum is across town at:
Adobe LiveCycle
Be well... -
my ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything
Get it fixed then, make an appointment with the Apple genius bar.
-
my up volume button does not work and i need to turn the incall volume up. is there an app that does this?
Hey skeith75,
Thanks for the question. Based on the information you have provided, your iPhone may need to be serviced to fix that button. However, if in the meantime you would like a workaround for turning the volume up on a phone call, you can use Assistive Touch:
iOS: Using AssistiveTouch
http://support.apple.com/kb/HT5587
If you do wish to service your iPhone, the following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
Apple - Support - Service Answer Center
http://www.apple.com/support/iphone/service/faq/
Thanks,
Matt M. -
If the power button on the top of the phone stops working and it sounds loose is that covered and can be fixed/replaced?
Fix an appointment at the Genius bar for evaluation and possible replacement.
-
HP pavilion dv6 microphone not working . help please . . .
HP pavilion dv6 microphone not working . help please . . .
Hi,
DV6 is a series of hundreads of models, what is yours ? To help us answer question quicker, please read this:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
You may wat to try this first:
1. Right click speaker icon (right hand corner)
2. Select Microphone devices
3. Right click Microphone
4. Enable it
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Maybe you are looking for
-
Can not open links in mail on ipad mini
I can not open a link to safari from the mail app on an iPad mini. is their setting for this function somewhere?
-
Error when I plug my iPhone in usb and itunes comes up
when I plug my iPhone in with usb connected to my computer, iTunes pops up ofcourse and opens but then a box appears and says: This iPhone cannot be used because the apple mobil device service is not started. never had this come up before, now I do h
-
How to write good PHP code in dreamweaver?
Here's the thing. I'm using Dreamweaver CS4 to develop a website. In the past my php files would look like this: <?php echo '<h1>Welcome ' . $name . '</h1>'; ?> This caused problems in the design view because all I would see would be the php ic
-
How do you get the search feature on the ipod 30gb ?
for some reason, my ipod 30gb does not have the search feature that i have seen on other ipods hp dv6000 Windows XP
-
Hi guys, is it possible to restart some stopped process in BPE? Try to imagine running process. After shutdown XI server the process is terminated or stopped. Is it possible execute the stopped process again? Does any FM exist? Thanks in advance! Reg