Quickly increase or decrease UI brightness?

Page 59 in the Photoshop reference, which is available for download in the Adobe Help section, states that the UI brightness can be quickly increased or decreased by pressing Shift + 1 and Shift + 2 respectively.
These keyboard shortcuts look useful enough, but when I use them in Photoshop CC the UI brightness remains the same. While using the shortcuts, I tried turning the Num Lock on and off and using the ten keys as well with no luck.
If anyone has succeeded in changing UI brightness using keyboards shortcuts, please post what keys are used.
Thank you in advance,
Ead

Pompom wrote:
…for some incomprehensible reason, I can press Shift+F1/F2 to change the UI brightness in both Photoshop CC and Photoshop CS6.
I have no idea what had been barring me from using these shortcuts, but they work now!…
On my Mac keyboard, I have to toggle the behavior of the Function Keys by pressing the fn-key (which I'm guessing in Windows would be the Windows-key — but I'm just speculating).

Similar Messages

  • When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.

    When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.
    Problem Event Name:             APPCRASH
    Application Name:                  iTunes.exe
    Application Version:               10.4.0.80
    Application Timestamp:          4e262cfr
    Fault Module Name:               QuickTime.qts
    Fault Module Version:             7.70.80.34
    Exception Code:                     c0000005
    Exception Offset:                    00146b30
    OS Version                                                            1033
    Locale ID:
    Additional Information 1:          0a9e
    Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
    Additional Information 3:          0a9e
    Additional Information4:          0a9e372d3b4ad19135b953a78882e789
    Any assistance I can get will be greatly appreciated.

    Thank you iTunes for fixing the problem of downloading my pictures to my iPad and iPhone with the update 10.5.0.142

  • How to create a numeric control (of any type) that can ONLY be increased or decreased by one 'unit' at a time?

    As in the title.  I wish to create a numeric control (no current limitations on its type) with a range of 1-10 (and a step of 1).  The only difficulty I'm having is that the user must only be able to increase or decrease it by 1 at any time.  The code initiated by this value change must have completed at least once before the value can be changed again.  This is because the VI's code is mostly contained in a while loop, and the control is read once every iteration and its last value must not differ by more than 1.
    Is this possible with LabVIEW 6.1 and if so, how?
    One of the solutions I've come up with so far is to disable the control immediately after it's read, and to enable it again immediately before it's read for the next time (I have to assume that the user is unable to click twice before the control is disabled).  Is this an acceptable method or is there a better way?
    I also had an idea of partially disabling a normal numeric control such that it could not be typed in - only the arrows remained operational.  However, i don't know quite how to do this.
    James
    Never say "Oops." Always say "Ah, interesting!"
    Solved!
    Go to Solution.

    Yes, i realize my solution needs the idea that followed it to be feasable in order to work properly.  My bad!
    I did wonder about using a combination like that, but I hoped it could all be done with one object.  Ah well - just means adding an extra little bit of code.  No probs.
    Thank you anyway.
    Never say "Oops." Always say "Ah, interesting!"

  • Can't get [ ] brackets to work to increase or decrease

    Hi
    I am new to this forum. I have CS2. My C drive crashed and I had to re-format my hard drive, and re-install all of my programs. Since then, my brackets[ ] with not work to increase or decrease brush sizes. I have to use the drop-down menu to change brush sizes every time. This is getting annoying and before re-installing photoshop, I thought I would ask to see if there is something that I should do to correct this. Anyone else ever have this problem?
    Thank-you for any advice or suggestions.
    Charlotte

    I went back again into keyboard shortcuts.When I delete the ] key for increasing brush size and then manually enter in the same key stroke [ ...a "ý" comes up (but it's a capital). When i manually type in keystroke for decreasing brush [ a "U" with a little triangle on top (can't remember what it's called) comes up. When I then press the brackets keys on my computer, the increase and decrease works..but it bugs me that it's not with the right keystroke. I tried resetting the keystroke shortcuts and then I'm right back again to the same problem. And YES (if you are wondering) my CS2 is a legal copy. I will try later tonight to retry another keyboard. I have to get my husband to do it cuz you have to pull everything out and it's an ordeal due to cabinet. Any other suggestions before yanking everything out. This thing bugs me!
    Charlotte

  • My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

    My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

    Clean iPhone charging port with a clean dry toothbrush. The iPhone port has a short, and falsely senses it is in a dock device.

  • Headphone Jack Problem - Volume Increases and Decreases Randomly

    Hi, has anyone encountered this problem?
    Whenever I plug in earphones the volume increases or decreases without me even touching the phone. It also disconnects alot whenever the earphones are moved.
    I have already updated my phone to the latest software and also did a factory reset however the problem is still there. I guess the headphone jack is broken, guess I will have to send it in for repairs

    You can either return it to the place of purchase or contact Xperia care http://www.sonymobile.com/global-en/support/contact-us/
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • Issue on space . Disk space increases and decreases automatically

    Hi All,
    In our QA environment for past 2 days we are facing issue on space . some unusual behaviour. Taken threaddumps at that time and found the issue
    "172.30.104.53 [1373723166026] <closed>" daemon prio=3 tid=0x0000000101dca800 nid=0x135f in Object.wait() [0xfffffffd8a9ff000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            - waiting on <0xfffffffdf9743658> (a com.day.j2ee.servletengine.HttpListener$Worker)
            at java.lang.Object.wait(Object.java:485)
            at com.day.j2ee.servletengine.HttpListener$Worker.await(HttpListener.java:587)
            - locked <0xfffffffdf9743658> (a com.day.j2ee.servletengine.HttpListener$Worker)
            at com.day.j2ee.servletengine.HttpListener$Worker.run(HttpListener.java:612)
            at java.lang.Thread.run(Thread.java:662)
    Please let me know where exact issue on thread.

    If you are seeing daily increases and decrease in your disk utilization (for example it increases during the day/overnaight but in the morning the disk space has recovered what you are seeing is the impact of Tar optimization.
    The Tar Persistence manager is the underlying storage mechanism for CRX. Data is stored in append only tar files. This means the when you update a node or property the new values are written to the Tar files, the indexes are updated to point to the new location, but the old data is also still left in the file. This mechanism allows for a much faster write mechanism. So the more you frequently you update existing content in your repository the larger you Tar files becomes.
    There is a process called Tar File Optimization that by default is scheduled to run from 2 AM to 5 AM server time. This process identifies all the orphaned data in the Tar files and deletes, there by reducing the size of the tar files on disk.
    So if you are in heavy content migration mode, or moving large amounts of content between instances you can see large swings in your disk space utilization as the Tar file balloons up during the day and then shrinks back down over night. In some cases depending on how large your repository is the 3 hours allotted by default is not sufficent to complete the optimizaiton so you may not be recovering all your disk space. During normal production operations this will normally average out over time and the 3 hour window is enough. However during periods of heavy usage, especially during QA or content migration you may find that your tar files are ever increasing in size. If that happens you need pick a period of time over say a weekend and trigger the Tar File optimization to run until complete to recover as much of your disk space as possible.
    See http://helpx.adobe.com/crx/kb/TarPMOptimization.html for details on Tar File Optimization.
    As someone else pointed out you may also have an issue with your data store which requires a different clean up method.
    Another possible culprit is your Lucene index files. Depending on your data model and repository size you can swings in your Lucene indexes because like the Tar File it periodically cleans itself up and large amounts of content change can cause this cycle to become more pronounced.
    This blog post dicusses in more deapth both Tar File Optimization and Data Store garbage collection. http://blog.aemarchitect.com/2013/06/17/importance-of-aem-maintenance-procedures-for-non-p roduction-boxes/

  • Beats per minute-increase or decrease

    My wife rides dressage free style (dancing horses) there are songs she likes, but sometimes the songs (bpm) do not match "foot fall" (bpm) of the horse. The music will normally be intrumental, we are also going start an "anythings goes" routines where we may use vocal are instrumentals.
    I know using GarageBand I can edit tunes length/cut & loop but can't figure out how to increase/decrease (bpms) of a prerecorded song by 1-20(bpm).
    I want to know using iTunes/GarageBand or other software how to increase or decrease a songs's (bpm) to match foot fall of the horse/s?

    Note that while applications such as beaTunes try their best, there is no reliable way for software to automatically to get an accurate beats-per-minute count. They only really accurate way is by figuring it out for yourself by counting with a watch and entering in the information, or using one the "tap to the beat and I'll tell you the timing" apps. beaTunes is just not terribly accurate for most types of music. You can download the trial version and see if it will work for you, though.
    Regards.

  • Increase and decrease a numerical text layer over time

    I need to create a text layer with a numerical value that will range from 0% to 100% over time using key frames. I need the value to change over time, increasing or decreasing the percentage based on key frames. Any ideas? Thank you!

    Add a Slider Control effect to the text layer, which you use to keyframe the percentage, then use this expression on the text layer's Source Text property:
    effect("Slider Control")("Slider").value.toFixed(0) + "%";
    The value in toFixed(0) controls the number of decimal places.

  • I am unable to increase or decrease volume in the earphone.

    HI I am unable to increase or decrease volume on my earphone. I have tried restore on the ipod but nothing worked. Can some one help please?

    I'm not the OP but just wanted to say that I was having the same irritating problem until I found your simple resolution so want to say thanks so much for answering the OP! I don't know why the keyboard light was locked/not adjusting to the surrounding level of light despite sitting in a very dark room at nighttime! Oh well... Problem solved. D'oh. Such a silly thing that took me a whole day to figure out.
    Thanks again!

  • How do i increase or decrease vaule of asset that was capitalized in prior

    How do I increase or decrease the value of an asset that was capitalized in prior year (2011)? The prior year and current year depreciation also needs to be adjusted to reflect the change in asset value.
    1)Assets were created in FY11 with an 11/15/2010 date
    2)The assets were given incorrect costs.
    3)I need to adjust the cost of several assets .The net amount of all cost adjustments will be 0$.
    4)Some of the assets will be adjusted down to 0$. These need to be disposed of.
    5)I tested few few assets in testing client using ABZON.
    ABZON will not allow me to input the original acquisition date because it is in prior fiscal year. To test, I used a period 1 date (4/15/11).  Using 4/15/11 will not adjust the prior year depreciation.
    ABZON also does not deactivate the asset so after I processed the asset decrease using ABZON, I used ABAVN to dispose of the asset.  This created an entry to the gain/loss account for the depreciation that was taken in FY11 (prior year).
    For example: one asset with acquisition value: 2272.05 and depreciation posted in prior year (2011)is 53.97
    Acquisition value 2272.05 has to be zero with other asset adjustment.
    How can prior year depreciation (53.97) can be adjusted in the current fiscal year
    Need your help on this.
    Regards,
    Lucky

    HI,
    My transaction type is not 7* series but it is 336.Please help me to get this done.
    I mean it is settled from project and WBS element to Assets(144 assets) using CJ88,so i tried reversing it in CJ88 but it thrown me error message as Fiscal year is closed, I opened fiscal year for asset accouting for previous year.
    i already did ABZON with value date 4/15/2011 for one asset among 144 assets and did asset retireemnt,so when try to reverse in CJ88 (value date :11/15/2010)its throwing me below message
    retirement was already posted on the asset 00000xxxxxx 0000 on 20110415. Based on the value date 20101115 of the transaction, this transaction should have been included in the calculation of values for the retirement.
    Reagrds,
    Pandu
    Edited by: luckypandu on Mar 9, 2012 3:46 AM

  • How to decrease screen brightness below the minimum ?

    I have windows 7 as bootcamp. I can decrease the screen brightness to the minimum but that itself is too bright to my eyes. But the minimum setting when i use mac is less brighter...
    So is there a way i can decrease the brightness below the minimum in bootcamp ?
    Thanks

    Hi Gopa,
    I have the same problem with all my Macs under Windows 7.
    I guess the Windows drivers are unsuitable!!
    Did you find a solution in the meantime?
    Thanks,

  • Increase or decrease leading in 1/10th point-keyboard

    I'm new at working in ad production with ID CS3. With the keyboard, I would like to Increase or decrease leading by less than one point increments (Option+Up Arrow/Down Arrow). In QuarkXPress I was able to nudge leading in 1/10th of a point increments (Command, Option, Shift ' or Command, Option, Shift ; ). Is there an ID CS3 keyboard shortcut for that?

    Thanks for your answer. However, that won't be acceptable for me in that the Leading preference setting is tied with Point Size. I currently have this setting at 1 point increments. I wouldn't want the keyboard shortcut for size to be .1 pt increments. So the lesser leading increment will have to be adjusted in the toolbar.

  • Volume bar increases and decreases normally, but no sound!

    I'm having a problem where I can press the button to increase and decrease the volume and the bar goes up and down accordingly. However, there is no sound whatsoever coming out of the laptop, what might the problem be?

    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Make sure Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications/Utilities/ Audio MIDI Setup.app
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so uncheck it.
    Best.

  • My iPhone volume seems to increase and decrease by itself, why

    Why does my iPhone 5s' volume increase and decrease by itself when connected via bluetooth to headphones, speakers, etc?

    Do you have your Facebook app open when this is happening? Or any other app that gets live Notifications? If so, close them when listening to music. The Notifications being pushed to your device will lower the volume momentarily as they arrive.
    Cheers,
    GB

Maybe you are looking for