Quickly size the screen with 2 programs running
I have a 24" iMac and usually have one or two programs open such as Preview and Quickbooks. When opening the programs it usually entails dragging each screen to fit so that they don't overlap. I would like to know if there is a quick way to size both screens to fit on the display at the same time and not overlap.
System Preferences---> Accessibility---> Zoom---> Use scroll gesture with modifier key to zoom. Select ctrl in the drop down menu.
It's a feature not normally turned on, so you might of had it turned on on your Mac before upgrading to Mavericks. And it just kept the setting.
KOT
Similar Messages
-
I have a PowerMac G4 running ProTools that no longer boots up. All I get is a file folder on the screen with a flashing question mark in it. Ran the Utility disk and all systems passed. Any ideas?
You need to use the computer's install disks to repair the hard drive or install a new OS.
(58033) -
My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean? And how can I get my computer back up and running normal?
Start up in Safe Mode.
http://support.apple.com/kb/PH14204?viewlocale=en_US
Repair Disk.
http://support.apple.com/kb/PH5836
Reset PRAM.
http://support.apple.com/kb/PH14222 -
How can I make a part of the body of my content full width of the screen with a fluid grid layout in CSS? (In dreamweaver program)
and I know it is being over-ridden by
.gridContainer {
width: 88.5%;
max-width: 1232px;
padding-left: 0.75%;
padding-right: 0.75%;
margin: auto;
clear: none;
float: none;Abdelqader Alnobani wrote:
How can I make a part of the body of my content full width of the screen with a fluid grid layout in CSS? (In dreamweaver program)
and I know it is being over-ridden by
.gridContainer {
width: 88.5%;
max-width: 1232px;
padding-left: 0.75%;
padding-right: 0.75%;
margin: auto;
clear: none;
float: none;
Logically a structure something like below should work BUT whether or not it will upset the FG I don't know as I wouldn't ever use it.
<div class="gridContainer">
Top Code Section Goes Here
</div>
<!-- close gridContainer -->
<div id="fullWidth">
Full width section goes here
</div>
<!-- close fullWidth -->
<div class="gridContainer">
Bottom Code Section Goes Here
</div>
<!-- close gridContainer --> -
Having an intermittent issue where my iMac blanks out on me. On restarting I get several bands running down the screen with pixels jumping around within the bands, then the white screen of death and nothing... This happens intermittently and usually restarts OK. Happened again three days ago and wouldn't restart for two days (again the bands/pixels etc) but now operating fine? Any ideas whats wrong with my iMac and what the solution may be? Also gets very hot from time to time, particularly if I'm playing music/watching youtube/movies for extended periods. Mac is 3.5 years old, running OS X 10.6.8, processor 3.4 GHz i7 memory 8GB 1333 MHz DDR3
If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. Use 2nd link if not near an Apple Store or aren’t in the US.
Genius Bar Reservation US
Authorized Service Provider -
Since july 2 I have Acrobat Pro (the paid version). But every time I start the program I get the screen with: this is a trial version. You have X days left, etc. I find that quite annoying.
This is not just annoying, it is wrong, because at the end of the trial it will stop completely. You must resolve it before then.
So, did you do anything to license the trial version? It needs to be told that you have purchased, or it will stop working at the end of the trial. -
Attn: Sun. Can we distribute the JRE with a program we write?
I'm trying to find out whether it's legal to distribute the JRE with a program I write. If you look at the license agreement when you download the JRE, first it has the regular license agreement, which says that you can't. But then it has the "supplemental" license agreement (and it says that this "modifies" the regular license agreement). In section 2 of the supplemental license agreement, it quite clearly states that you can as long as you don't modify it and you include some little messages in your documentation.
So I'm hoping to get an answer from someone who actually works for Sun. It seems pretty clear to me that we ARE allowed to distribute the JRE with a program, but people keep sending me emails when I tell them about it - saying things like "You can't program in Java because you can't distribute it."
What I want to do is have an installation program that installs my game and then installs Java (with Sun's JRE installer - this is included ONLY so that it can run my game, as stated in the supplemental license agreement). I should also mention that I do actually intend to SELL this program, so if that's a problem, please say so. Anyways, could someone from Sun tell me whether this is allowed or not? I don't want to break the law.
- Steve FletcherThe JRE includes a readme file that explicitly states that distribution is permissible, given certain conditions. In particular, look at the 1st paragraph below:
Reproduced here:
README
Java(TM) 2 Runtime Environment, Standard Edition
Version 1.4.1
The Java(TM) 2 Runtime Environment is intended for software developers
and vendors to redistribute with their applications.
The Java 2 Runtime Environment contains the Java virtual machine,
runtime class libraries, and Java application launcher that are
necessary to run programs written in the Java programming language.
It is not a development environment and does not contain development
tools such as compilers or debuggers. For development tools, see the
Java 2 SDK, Standard Edition.
=======================================================================
Deploying Applications with the Java 2 Runtime Environment
=======================================================================
When you deploy an application written in the Java programming
language, your software bundle will probably consist of the following
parts:
Your own class, resource, and data files.
A runtime environment.
An installation procedure or program.
You already have the first part, of course. The remainder of this
document covers the other two parts. See also the Notes for Developers
page on the Java Software website:
http://java.sun.com/j2se/1.4.1/runtime.html
Runtime Environment
To run your application, a user needs the Java 2 Runtime Environment,
which is freely available from Sun for application developers to
redistribute.
The final step in the deployment process occurs when the software is
installed on individual user system. Installation consists of copying
software onto the user's system, then configuring the user's system
to support that software. You should ensure that your installation
procedure does not overwrite existing JRE installations, as they may
be required by other applications.
=======================================================================
Redistribution of the Java 2 Runtime Environment
=======================================================================
The term "vendors" used here refers to licensees, developers, and
independent software vendors (ISVs) who license and distribute the
Java 2 Runtime Environment with their programs.
Vendors must follow the terms of the Java 2 Runtime Environment Binary
Code License agreement.
Required vs. Optional Files
The files that make up the Java 2 Runtime Environment are divided into
two categories: required and optional. Optional files may be excluded
from redistributions of the Java 2 Runtime Environment at the
licensee's discretion.
The following section contains a list of the files and directories that
may optionally be omitted from redistributions with the Java 2 Runtime
Environment. All files not in these lists of optional files must be
included in redistributions of the runtime environment.
Optional Files and Directories
The following files may be optionally excluded from redistributions:
lib/charsets.jar
Character conversion classes
jre/lib/ext/
sunjce_provider.jar - the SunJCE provider for Java
Cryptography APIs
localedata.jar - contains many of the resources
needed for non US English locales
ldapsec.jar - contains security features supported
by the LDAP service provider
dnsns.jar - for the InetAddress wrapper of JNDI DNS provider
bin/rmid
Java RMI Activation System Daemon
bin/rmiregistry
Java Remote Object Registry
bin/tnameserv
Java IDL Name Server
bin/keytool
Key and Certificate Management Tool
bin/kinit and jre/bin/kinit
Used to obtain and cache Kerberos ticket-granting tickets
bin/klist and jre/bin/klist
Kerberos display entries in credentials cache and keytab
bin/ktab and jre/bin/ktab
Kerberos key table manager
bin/policytool
Policy File Creation and Management Tool
bin/orbd
Object Request Broker Daemon
bin/servertool
Java IDL Server Tool
In addition, the Java Web Start product may be excluded from
redistributions. Depending on the platform, the Java Web Start
product is contained in a file named as follows. The actual
product version number would replace the <version number> notation.
javaws-<version number>-solaris-sparc-i.zip
javaws-<version number>-solaris-i586-i.zip
javaws-<version number>-linux-i586-i.zip
javaws-<version number>-windows-i586-i.exe
Redistribution of Java 2 SDK Files
The limited set of files from the SDK listed below may be included in
vendor redistributions of the Java 2 Runtime Environment. All paths
are relative to the top-level directory of the SDK.
- jre/lib/cmm/PYCC.pf
Color profile. This file is required only if one wishes to
convert between the PYCC color space and another color space.
- All .ttf font files in the jre/lib/fonts directory. Note that the
LucidaSansRegular.ttf font is already contained in the Java 2
Runtime Environment, so there is no need to bring that file over
from the SDK.
- jre/lib/audio/soundbank.gm
This MIDI soundbank is present in the Java 2 SDK, but it has
been removed from the Java 2 Runtime Environment in order to
reduce the size of the Runtime Environment's download bundle.
However, a soundbank file is necessary for MIDI playback, and
therefore the SDK's soundbank.gm file may be included in
redistributions of the Runtime Environment at the vendor's
discretion. Several versions of enhanced MIDI soundbanks are
available from the Java Sound web site:
http://java.sun.com/products/java-media/sound/
These alternative soundbanks may be included in redistributions
of the Java 2 Runtime Environment.
- The javac bytecode compiler, consisting of the following files:
bin/javac [Solaris(TM) Operating Environment
and Linux]
bin/sparcv9/javac [Solaris Operating Environment
(SPARC(TM) Platform Edition)]
bin/javac.exe [Microsoft Windows]
lib/tools.jar [All platforms]
- jre\bin\server\
On Microsoft Windows platforms, the Java 2 SDK includes both
the Java HotSpot Server VM and Java HotSpot Client VM. However,
the Java 2 Runtime Environment for Microsoft Windows platforms
includes only the Java HotSpot Client VM. Those wishing to use
the Java HotSpot Server VM with the Java 2 Runtime Environment
may copy the SDK's jre\bin\server folder to a bin\server
directory in the Java Runtime Environment. Software vendors may
redistribute the Java HotSpot Server VM with their
redistributions of the Java Runtime Environment.
Unlimited Strength Java Cryptography Extension
Due to import control restrictions for some countries, the Java
Cryptography Extension (JCE) policy files shipped with the Java 2 SDK,
Standard Edition and the Java 2 Runtime Environment allow strong but
limited cryptography to be used. These files are located at:
<java-home>/lib/security/local_policy.jar
<java-home>lib/security/US_export_policy.jar
where <java-home> is the jre directory of the Java 2 SDK or the
top-level directory of the Java 2 Runtime Environment.
An unlimited strength version of these files indicating no restrictions
on cryptographic strengths is available on the Java 2 SDK web site for
those living in eligible countries. Those living in eligible countries
may download the unlimited strength version and replace the strong
cryptography jar files with the unlimited strength files.
Endorsed Standards Override Mechanism
An endorsed standard is a Java API defined through a standards
process other than the Java Community Process(SM) (JCP(SM)). Because
endorsed standards are defined outside the JCP, it is anticipated that
such standards will be revised between releases of the Java 2
Platform. In order to take advantage of new revisions to endorsed
standards, developers and software vendors may use the Endorsed
Standards Override Mechanism to provide newer versions of an endorsed
standard than those included in the Java 2 Platform as released by Sun
Microsystems.
For more information on the Endorsed Standards Override Mechanism,
including the list of platform packages that it may be used to
override, see
http://java.sun.com/j2se/1.4.1/docs/guide/standards/
Classes in the packages listed on that web page may be replaced only
by classes implementing a more recent version of the API as defined
by the appropriate standards body.
In addition to the packages listed in the document at the above
URL, which are part of the Java 2 Platform, Standard Edition
(J2SE(TM)) specification, redistributors of Sun's J2SE
Reference Implementation are allowed to override classes whose
sole purpose is to implement the functionality provided by
public APIs defined in these Endorsed Standards packages.
Redistributors may also override classes in the org.w3c.dom.*
packages, or other classes whose sole purpose is to implement
these APIs.
Copyright 2003 Sun Microsystems, Inc., 4150 Network Circle,
Santa Clara, California 95054, U.S.A. All rights reserved -
Whenever I open a new Firefox Browser, the other Firefox Browsers that I have minimized to the bottom of the screen all restore, (reopen up) onto the screen with the new opened Firefox Browser, how do I stop this? Just want the new one to open on screen and the existing stay minimized.
== This happened ==
Every time Firefox opened
== I think when a I updated or downloaded a newer version of FireFox at Firefox's suggestion.Hmm that does sound a bit strange - I use a system quite similar to yours (XP, FF 3.6.3), and don't see this behaviour.
I would recommend trying to start Firefox in Firefox [[Safe Mode]] (make sure you close '''all''' running Firefox instances first), and see if this problem persists.
If not, it could be some add-on causing this behaviour - restart Firefox in Safe Mode, disable all add-ons, and enable them one by one to find the guilty one.
If it still happens in Firefox Safe Mode, some other program (or something in Windows itself) most likely is the cause. We may be able to help with this too, so let us know what works and provide as much additional information as possible to let us help you solve this.
Please let us know how above works out, and if we can be of further assistance. Detailed feedback is appreciated and helps us to help you better, plus enables us to better help other users with similar issues. -
Zoom the screen with ctrl 2-Finger Swipe not working in Mavericks
I just bought a new Macbook Air for my wife (running Mavericks) and can't figure out why the Zoom the screen with ctrl 2-Finger Swipe is not working.
I can't find the setting anywhere.
I looked on my Macbook Pro running Mavericks (on which the zoom still works), but I cannot find the setting on that computer either.
Please help.
ThanksSystem Preferences---> Accessibility---> Zoom---> Use scroll gesture with modifier key to zoom. Select ctrl in the drop down menu.
It's a feature not normally turned on, so you might of had it turned on on your Mac before upgrading to Mavericks. And it just kept the setting.
KOT -
when i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i solve this?if i don t want a headset?
SORRY, the picture is just to illustrate and to better show the area where the time display is located, same place in the iPhone 3gs, to my knowledge, the location is the same, due to the OS on both phones.
Second, run the test to see if it works:
1st test: go to phone mode, select dial key pad, put the tip of your thumb in top of the time display ( the screen will not go black), try to dial.
2nd test: place a call, after starts ringing switch the display to dial pad, put the tip of your thumb on top of the time display, the screen will not go black, try to dial.
THE SCREEN WILL ONLY GO BLACK ( INACTIVE) IF YOU TOUCH A LARGER AREA TO THE TOP OF THE DISPLAY, IF THE THUMB ONLY TOUCHES THE TIME DISPLAY AND A LITTLE PART OF THE AREA WHERE THE NUMBERS APPEAR THE DIAL PAD DID NOT WORK EVEN WITH THE DISPLAY NOT GOING BLACK (INACTIVE).
I am also trying in my wife's iPhone 4 as I right this post and both phones behave the same way.
I found out what I stated above after running tests to see if the case was affecting the phones performance.
Due to the thickness of the case on the sensor area, it really did affect the way the sensor was supposed to work, after I cut that part on the case, the sensor started to work perfectly and the screen turns off during a call like it is supposed to do.
So before someone go nuts thinking that the phone is not working and that they have to take it to repair, try seeing if the case is not interfering with the phones performance. -
My activity monitor show random and fluctuating CPU usage at the Dock site with absolutelyno programs running. %'s fluctuate between 3 - 20 and they pretty much come and go. What might be causing this?
There's a lot of background processes running that aren't documented as Apps as such. And some of them are the Time Machine backups, Spotlight searches, all kinds of small little bits of maintenance caches, there's a lot going on. So it's not completely out of the question that this is 'normal' for a Mac. If it were 50% or more I would be concerned but if it spikes up to 20% for a second or two you are probably not in any trouble of any kind.
-
Kill inactive sessions with no programs run it
hi all,
my database is 10gR2 with developer 6i
the database have huge number of sessions with no programs running it like oracle form, some of those sessions stack in v$session table due to power failure.
restart server solve the problem, but it is not efficient.
is there any method to fined witch of database sessions is actually connect to the database and have application running it ?This script will give you the complete detail of Session , PID and Program which is running in dagtabase level.
You can include the "STATUS" coloumn from v$session to get user status.
Script is like this:
set echo off;
set termout on;
set linesize 80;
set pagesize 60;
set newpage 0;
select
rpad(c.name||':',11)||rpad(' current logons='||
(to_number(b.sessions_current)),20)||'cumulative logons='||
rpad(substr(a.value,1,10),10)||'highwater mark='||
b.sessions_highwater Information
from
v$sysstat a,
v$license b,
v$database c
where
a.name = 'logons cumulative'
ttitle "dbname Database|UNIX/Oracle Sessions";
set heading off;
select 'Sessions on database '||substr(name,1,8) from v$database;
set heading on;
select
substr(a.spid,1,9) pid,
substr(b.sid,1,5) sid,
substr(b.serial#,1,5) ser#,
substr(b.machine,1,6) box,
substr(b.username,1,10) username,
-- b.server,
substr(b.osuser,1,8) os_user,
substr(b.program,1,30) program
from v$session b, v$process a
where
b.paddr = a.addr
and type='USER'
order by spid;
ttitle off;
spool off;
Save this script with your desire name and run in Database.
Mukesh -
To fetch data on the basis of last program run date and time
Hi all,
My query is as folows:
I am selecting BOM components from STPO table on the basis of some criteria.
My requirement is to select only BOM components which are newly added or created after last program run,i.e. STPO-AEDAT and STPO-ANDAT are greater than last program run.Here i fetched last program date from customised structure(client specific) which has date field also,and compared with aedat and andat in STPO records.But how can I connect it with last run time as there is no such time field in STPO table.I need to fetch this data on the basis of last program run(time+date).
Please help me..it's crucial,
Thanks in advance,
MeenaHi,
We had a very similar requirement.
We developed a custom-solution for this.
Create a Z-Table and update it with your progname, date and time.
Whenever the BOM was changed, it generated a change number ( this has to be done by the user)
You can get the date and time from the change Number Table AENR and compare it with the timestamp in Z-TABLE
Hope it helps,
RJ -
Can the Dock in Yosemite be made transparent? I would also like Safari to paint to the bottom of the screen with the dock icons floating over the window.
Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
How to export the Screens of dialog programming into notepad
Hi Guys,
Here I am having a requirement to copy the screens of dialog program into another SAP system.
So I have to export the screen along with coding into NOTEPAD.
I am able to copy the coding part, <b>but how to copy the screen into notepad</b>
Give me the appropriate answers.
I will award the points to the answersHi Chakra.
please take carte that a screen consists of layout, fields and flow logic. Get all components using this form routine (taken from excellent useful SAP report RPR_ABAP_SOURCE_SCAN):
Form GET_DYNPRO_FLOW_LOGIC
Get flow logic of the dynpro
form get_dynpro_flow_logic.
data: dhead like d020s,
dfield like d021s occurs 0,
dflow like d022s occurs 0,
dmatch like d023s occurs 0,
begin of dynp_id,
prog like d020s-prog,
dnum like d020s-dnum,
end of dynp_id.
dynp_id-prog = dyn-prog.
dynp_id-dnum = dyn-dnum.
import dynpro dhead dfield dflow dmatch id dynp_id.
rtab[] = dflow[].
endform. " GET_DYNPRO_FLOW_LOGIC
Regards,
Clemens
Maybe you are looking for
-
Why does autofill in safari no longer work in iOS8?
Autofill no longer functions as before now that I have upgraded my iPhone 5 to iOS8. It no longer fills in my username and password automatically when I go to a website. Instead I have to put the cursor in the username space and then an autofill opti
-
XSL Transformation (XSLProcessor) doesn't work on WebSphere 3.5.4
XSL-1013: (Error) Error in expression: '/' I have encountered this problem. The problem seems to be the same as running the oraxsl in the command line using java. I tried using jre instead of java and including the -nojit (Disable JIT Compiler) and i
-
Save for Web only let me save as jpg!
For some reason, I got a file that's only let me do Save for Web in jpg format. I choose png24, click save and it changes to jpg in the save dialog. Then I created a blank doc, copy everything from the problem file over to the new file and I can Save
-
hi i have manually created a database called ora.i have done all the relative tasks.i can open the database by startup nomount pfile.but when i try to create spfile from pfile, it is showing an error that it is already created.when i give the startup
-
Fast Refreshing Materialized View
I have an mview which the base tables resideson different schema, the base tables also have mview log. When I try to insert rows into base tables, these errors show up: Error report: SQL Error: ORA-12008: error in materialized view refresh path ORA-0