Quickplay won't record a VCR input from a USB Pinnacle TV stick.

If I try to record a VCR movie (camcorder type) with Quickplay, it's says, "This content is protected and cannot be recorded". What I've noticed is it seems to only be the analog input from the Pinnacle device. Media Center can record it, but the bottom of the video is distorted. It looks good when played in Quickplay, but won't record. Anyone seen this or have any ideas? Thanks.

maskeda wrote:
I got it, some how it was a MIDI track and not an audio track.
"Some How"? as in: user error?

Similar Messages

Can anyone explain to me why sometimes my ipad2 locks up and won't respond to any input from the keyboard.

My iPad 2 locks up sometimes and won't respond to any input from the keyboard. Have to reboot in order to fix the problem.

You have 3 choices:
1. Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.
2. Restore from backup using iTunes
3. Restore as new without the backup

I have to step-input an existing score and tried it with the step-input-window in combination with midi-input from an usb-keyboard.

I have to step-input an existing score and tried it with the step-input-window in combination with midi-input from an usb-keyboard.

Tsk tsk, Nigel, don't you see: this is a story - with a cliffhanger... he said he tried... but he never clarifies if he succeeded or not... but still, he has to do it. It's stronger than him, bigger than him, there's no escaping the step-input and midi-input via usb-keyboard scoring... it's fate I tell you! Fate!

Best way to make program wait for input from NI USB 9162?

Hi, I'm somewhat new to Labview, but through all the tutorials and online help I'm still having trouble getting this to function properly.
The USB adapter is hooked up to a network cable split into single wires reading in a voltage coming through several seperate oscillators.
Testing in the lab, the program included below works fine when I run the program, then quickly administer a shock to the table. In the real world scenario though, I'm trying to make the program wait to record data until the first shock reaches the first oscillator before recording data, but I just can't seem to find an easy way to make this work.
Attatched is an example of the program. Any help would be greatly appreciated. Thank you.
Attachments:
Acq&Graph Voltage-Int Clk-rh-tt-1.vi ‏56 KB

Hi,
I think I have the answer you're looking for! Please see the attached VI.
I moved the graph indicator inside the "true" case of the case structure. Before, your VI was sending data to the graph from an empty timestamp constant with each iteration of the "false" case. Now the VI only sends data to the graph if a true is read.
If you're wondering why it takes a bit of time for your graph to stop updating before it stops writing new data, it's because you're filling up a buffer of sampled data by using a queue. If you're writing to the buffer faster than you're reading from the buffer, you may encounter an "overflow" situation when the queue gets full. To avoid this, you might consider using a notifier rather than a queue. It's the exact same thing as a queue, but it gives you only the most recent value, allowing new values to overwrite old values.
Hope this helps.
Regards,
Dan Richards
Certified LabVIEW Developer
Attachments:
producer consumer DAQmx threshold.vi ‏57 KB

Cannot share a volume from a USB flash memory stick

Hi,
I had a small USB disk drive hanging off my iMac for years. At one point I shared it and was able to access it from other Macs at my house.
Recently the drive began to fail, and since it was a small disk, I decided to replace it with a 128GB flash memory stick instead of a mechanical hard drive. I formatted the memory stick as Mac OS Extended (Journaled), which is the same way the hard drive is formatted, and I copied all my files onto it.
The new volume works fine on my iMac, but I can't share it. In the Settings, if I try to add the drive as a share, nothing shows up. I can share individual folders on the drive, and they appear to be shared, but they are never visible on any of the remote computers. (Everything is running Mountain Lion).
I can't figure out what could be causing this. I checked and repaired the volume several times, it seems fine, it just won't share.
Thanks,
Frank

Aha, a proper Eureka moment.
Thanks for the tip, and it does exactly what I hoped it would.Thank you, I knew it had to be a simple solution ( too simple for me to work out though ! )

Recording line-level input with Griffin iMic

I'm having trouble recording line-level input from a stereo system with a Griffin iMic. Even though all extraneous inputs have been deactivated, I'm still getting a slight feedback hum. There should be no extraneous noise whatsoever. I haven't done this in quite a while, so I've forgotten what I must do. Any help is apprreciated. Thanks very much. Peace,
iBook G3, 1.42 Mac mini G4 DVD±RW Mac OS X (10.3.9) 640Mb SDRAM, 1gb DDRAM

I'm trying to digitize an audio cassette with
Soundtrack Pro. My setup includes a Griffin iMic
that goes to a USB port. The trouble I'm having is
in controlling the input volume. The level meters
indicate clipping, but I'm not clear how to set the
input level.
If it's in the Recording tab (>Input) with the Gain
slider, mine is greyed out.
M Wohlgy,
(I know this is months after your post.)
Control of the iMic volume is in the Preferences pane called "Sound". You can set the output and the input levels there.
Remember the iMic's position switch works only for the imput, either close to the microphone icon for "microphone" or away from it for "line in".
I use the iMic exclusively.
David

When I import a video I recorded to my laptop from my Iphone 5c it won't play on window media centre or vec or any medium. Please help??? It plays perfect on the phone.

When I import a video I recorded to my laptop from my Iphone 5c it won't play on window media centre or vec or any medium. Please help??? It plays perfect on the phone.

The format from the phone is :
h.264 encoded video, AAC audio. Both standards of MPEG 4.
You need Windows Media Player version 12 or above to play MP4 (or add the codecs to your current version).

Logic Pro X all of a sudden can't detect input from M-Audio Mobile Pre

I was recording guitars when I had to step away for a while. I closed the lid on my MBP and left. When I came back, all of a sudden, Logic can't detect any inputs coming from my USB interface. I have tried everything from rebooting, switching to the other input on my interface, updating drivers, but nothing seems to work. What's worse is whenever I start Logic with my interface plugged in, Logic gets stuck at Checking MIDI Drivers. If I unplug my interface, Logic would start fine, but if I plug my interface back, Logic won't detect it.
I am using the M-Audio's input while I am using the Built-In Output on the MBP (I don't have monitor speakers). It was working fine before.
I am using a Mid-2012 MBP 15" on OSX Mountain Lion and an M-Audio MobilePre MKII USB interface.

In this exact order
1) Unplug MobilePre
2) Remove it's drivers using the uninstall routine that is in the Driver DMG image ...
Note: If you get a message about it cannot uninstall.. Restart your Mac and then try to uninstall again...
3) Restart your Mac after you have uninstalled the drivers..
4) Reinstall latest drivers......
5) Restart Mac..
6) Wait until Mac has restarted and then plug in MobilePre...
It should then be correctly recognized and work....

New sound card (E-MU 1212M) won't record higher than 48kHz

I'm running Windows XP Pro/SP2 with a 2.8GHz Pentium 4 processor (motherboard is Elitegroup 848P-A). I have 1GB of RAM installed.
I do a lot of vinyl transfer work. I decided to upgrade sound cards to the E-MU 1212M to improve the overall quality of my audio.
The card install went well. I'm receiving an audio signal just fine. I can playback at 44.1, 48, 96, 192.
The only hitch is when I try to record. I can record at 44.1 & 48 but if I try to record at 96 or 192 I get the following message:"Another application has caused a sample rate change that makes the current session invalid. You may accept this change by loading session at the new sample rate indicated below...." The sample rate that it shows me is always 44.1 So when receiving this message it always wants to push me back to 44.1 This message pops up immediately after I hit the red "record" button.
There are no other audio applications similar to Audition installed on my set up. I have turned off the system sounds, the 1212M card is recognized as the default audio device. The on-board sound card has been disabled along with its drivers. Gone also are the drivers from my previous sound card.
The settings between the 1212M and Audition are following along with each other. If I set the 1212M for 44.1, 48, 96, or 192 and then open up Audition and check the hardware settings, its at whatever I had set the 1212M to.
Ive also gone through what items are being loaded during start-up of my computer. Ive tried disconnecting from the internet and shutting down all programs that might be active, ensuring that no other programs are running other than Au 3 and the 1212M PatchMix panel.
Any suggestions?
Thanks for your time.
-DLedin

"Before you did that, did you start a new session at 96k, and it still won't record into it? "
If you're asking if I first start a new session in PatchMix, yes, that's correct. I call up the 96k session in PatchMix first. Then I go and open up Audition to try to record.
If you're asking me if I start a new session in Audition 3 first, then I'm not sure exactly what you mean by that. Remember, I'm new to Au 3. When working in Audition 1.5, I could hit the "record" button and a window would pop up, prompting me to enter a sample rate and bit depth for the audio I'm about to record. I enter what I want to do and press "OK", then Audition starts to record. I don't know if that window is what you're referring to as a "session".
If that is a what you mean by "session" then I would need to do some experimenting by setting PatchMix to 44.1, then open up Audition, hit "record", specify 96/24 in the window that pops up and see what happens. I would hope that I'd get a message from PatchMix that I need to go to set PatchMix for a 96k "session". That's actually a possibility I hadn't previously considered trying. I'm at work now but will look into this possibility after I'm back home & report back.
-DLedin
EDIT: Since my last reading of your message you added a question:"Also, when you set the session up, did you take the check out of the 'use default' box?"
Please specify which application you're referring to when you say "session". PatchMix uses the term quite a lot. If there's a "use default" box somewhere that I need to take a look at then I need to know if it's in Audition 3 or PatchMix and just where to find it. Also, should that "use default" box be checked or unchecked? I appreciate your patience.

Load multiple records in 1 table from 1 line in text file w/sql loader

hi guys,
quick question, perhaps someone can help. searched around and didn't see this question asked before, and can't find any answer in SQL Loader faqs or docs.
i know i can extract multiple logical records from a single physical record in the input file as two logical records, and then use two into tables clauses to load the data into the table. see oracle 9i sql loader control file reference chapter 5 to see what i am talking about.
but my question follows:
cust_id amount1_val amount1_qual amount2_val amount2_qual amount3_val amount3_qual
123 1500.35 TA 230.34 VZ 3045.50 TW
basically i want to use one sql loader statement to load these 3 records into 1 table. the issue for me is that i need to re-use the cust_id for all 3 records as the key, along with the qualifier code. the example in the Oracle docs only works for data where the logical records are completely separate -- no shared column values.
i'm sure this is possible, perhaps using some :cust_id type parameter for the 2nd and 3rd records, or something, but i just don't have enough knowledge/experience with sql loader to know what to do. appreciate any help.
wayne

Hi wayne,
I found an example on what exactly you were looking for from an SQL*Loader documentation. Please see if it of some help to you
EXAMPLE
The control file is ULCASE5.CTL.
1234 BAKER 10 9999 101
1234 JOKER 10 9999 777
2664 YOUNG 20 2893 425
5321 OTOOLE 10 9999 321
2134 FARMER 20 4555 236
2414 LITTLE 20 5634 236
6542 LEE 10 4532 102
2849 EDDS xx 4555
4532 PERKINS 10 9999 40
1244 HUNT 11 3452 665
123 DOOLITTLE 12 9940
1453 MACDONALD 25 5532
In the above datafile
Column1 - Empno
Column2 - ENAME
Column3 - Depno.
Column4 - MGR
Column5 - Proj no.
-- Loads EMP records from first 23 characters
-- Creates and loads PROJ records for each PROJNO listed
-- for each employee
LOAD DATA
INFILE 'ulcase5.dat'
BADFILE 'ulcase5.bad'
DISCARDFILE 'ulcase5.dsc'
1) REPLACE
2) INTO TABLE emp
(empno POSITION(1:4) INTEGER EXTERNAL,
ename POSITION(6:15) CHAR,
deptno POSITION(17:18) CHAR,
mgr POSITION(20:23) INTEGER EXTERNAL)
2) INTO TABLE proj
(empno POSITION(1:4) INTEGER EXTERNAL,
3) projno POSITION(25:27) INTEGER EXTERNAL) -- 1st proj
Notes:
REPLACE specifies that if there is data in the tables to be loaded (EMP and PROJ), SQL*loader should delete the data before loading new rows.
Multiple INTO clauses load two tables, EMP and PROJ. The same set of records is processed three times, using different combinations of columns each time to load table PROJ.
Regards,
Murali Mohan

1DC- Sound Recording via Line input woes

Have the latest firmware update on my 1DC. There are 3 issues I am hoping someone can help with
#1 I assume you must set Sound recording to 'Line input' and NOT manual, but if I set the Rec level, whenever the camera is powered off, either automatically or manually, this Rec level is ALWAYS reset to zero. Also, the moment recording is startted, even though audio input levels are set correctly, no audio is recorded. This seems like a firmware bug to me. This does NOT happen when set to manual. Anyone know of a workaround?
When using Manual and plugging in an external audio source I assume this signal will override the audio from the camera's internal mic.
If this is correct and there are no issues when using 'Manual', then what is the difference between 'Manual' and "Line input'??
#2 When setting Sound input to Manual, the VU meters are visible, but NOT when set to Line input. Why?
#3 Can anyone recommend a specific connector to go from line out on a Zoom H6 to Mic in on the 1DC?
Solved!
Go to Solution.

No. Apparently a buggy firmware release. My understanding is that there is another release planned soon. Hopefully with several new (and working) features in addition to the line input.
Using Manual with a -25dB cable for now.

Recording thru rear inputs on motu 828 mk2

i have logic 7.1.1 with a motu 828 mk2 sound card. i am going out my turntables, into a mixer, and then into the rear inputs(1+2 analog) on the back of the motu. i see the levels lighting up(above 1+2 as well as the main) and the speakers attached to the motu are playing the music from the turntables.
i cant get logic to monitor or record any of the sound from the card. how would i get the input from 1 to go to its own track in logic, while the input from 2 would go to a seperate track?
thanks for any help.

this happens to me from time to time. I have level and sound on the track, I hit record and nothing gets recorded. I have discovered this happen when I have another track selected other than the track I am recording on. This may be a bug in 7.1.1. Make sure you have the track you are recording to, highlighted (selected).

Profile.xml: how to select a video input (from number not name)

Hello,
I'm using FMEcmd in command-line mode with a custom
profile.xml
If I look at the profile.xml it looks like the selection of
the inputs (video and audio) is only possible by giving the full
name of the input (not just the input number like for Real Producer
or Windows Media Encoder).
The app. I'm developing will be used with a webcam and I dont
have the information about the model someone will be using (and the
user won't open the FME GUI to generate a profile).
Is it really not possible to select an input from its number
(as seen by windows)?
If not do you have any suggestion to overcome this
limitation?
Also I've played with <crossbar_input> but I'm not sure
what it means.
Thanks
<video>
<device> ToUcam Pro Camera; Video</device>
<crossbar_input>0</crossbar_input>
<frame_rate>15.00</frame_rate>
<size>
<width>320</width>
<height>240</height>
</size>
</video>
<audio>
<device>Appareil photo Philips ToUcam F</device>
<crossbar_input>0</crossbar_input>
<sample_rate>22050</sample_rate>
<channels>1</channels>
<input_volume>75</input_volume>
</audio>

Now that FME 2.5 is out I tried again. I still can't find the
possibility to select the source from number (like Windows Media
Encoder or Real Producer can).
Can someone confirm that this possibility is not present in
2.5?
Is there any slight chance it will be implemented in the next
version?
What work around do you advise?
Thanks for any answers.

Batch input from sproxy

Hi
I want to use batch input to clear field in vl02n(dleivery),when the batch input is called from sproxy(XI) there is mix in the screens and he oesn't find the field in the batch input screen and therfore doesn't clear the field.
When i copy the batch input to other program its works( not using sproxy ).
How i can solve the problem?
Thanks
Have a nice day

Hello,
have you tried to record the Batch Input via Transaction SM35 and create a function module out of it?
Regards
Gregor

5.1 recording via optical input?

I understand that the Mini has both optical inputs and outputs for sound, facilitating a 5.1 bitstream surround sound -- at least for the output. With the proper software, can't it also play-through and record a 5.1 bitstream through the input?
I'm mostly interested in recording the 5.1 audio output from my Xbox 360 and PS3.

I too would be very interested in recording 5.1 gameplay from xbox360.
I've tried connecting the optical from my digital TV, and hear loud "digital noise" which I assume is the AC3 bitstream before being decoded.
Anyone know of a way to decode this?

Quickplay won't record a VCR input from a USB Pinnacle TV stick.

Similar Messages

Maybe you are looking for