Quicksizer_Server sizing

Dear All,
I have a problem using SAP tool quicksizer for server sizing. We want to do server sizing for FI module to be implemented. I just want clarification that when we have number of documents that are being transferred from FI to CO-PA-FI, do we need to consider no of line items generated using T code KEU5 for Assessment and KE 28 for Top Down Allocation. Because in help it is being said that we should not consider them but I want clarification from a person who has done it practically.
Thanks

H Pawan,
I do not see a difference in sizing for NW PI 7.3 and NW PI 7.1. You may proceed with existing template on quicksizer and generate sizing information.
Hope this helps.
Regards,
Deepak Kori

Similar Messages

Data Federator Sizing & Usage

Hi,
I am looking for a Data Federator wiki & sizing guide..
we have in the process of installing Data Federator 3.0 on a windows platform.
I am not familiar with this component. Please throw some light on how is it exactly used..
What does the Data Federator do ? why is it implmented...Please help me..

Hi
I would recommend to take a look at the user guide:
http://help.sap.com/businessobject/product_guides/boexi3SP2/en/xi3_sp2_df_userguide_en.pdf
Regards,
Stratos

"Memory Sizing" error on Sun Fire V65x

Hello.
I have some trouble with my old Sun Fire V65x and i hope that you guys can help me out.
I had 2,5GB RAM installed in my server, working flawless. 2 x 256MB and 2 x 1GB modules. 256-modules in Bank 1 and 1GB´s in Bank 2.
To get rid of the boot up warning of wrong memory configuration i moved the 2 1GB modules to bank 3 (as stated in the manual) but that was when the problem started.
In this configuration the server won't go to POST, i tried moving the 1GB modules around between bank 1, 2 & 3 without any result.
The server will not go to POST. No beeps, no nothing. When turning the server on line it starts up, the fans starts running on at maximum speed and that's all, no picture and no POST and the system warning LED turns to red. After a couple of minutes in this state the fans slow down for a couple of seconds and then back to 100% (repeating cycle)
The POST diagnostics LEDs at the back of the main board indicates POST code 13h, "Memory sizing". The main board does not report any defective DIMMs, also worth mentioning is that the 2 256MB DIMMs are working flawlessly in all banks.
I have tried:
Resetting the memory config in BIOS (using the 2x256 DIMMs and then installing the 2 1GB modules.
Moving the memory modules around between different banks, both alone and with the 2 256MB DIMMs present.
Clearing the CMOS settings.
Searching manuals and Google for hours without answer to my problem or what "memory sizing " means in this situation.
System:
Sun Fire V65x
1 CPU
If anyone know the answer to my dilemma and are willing to help me, i would be really grateful.
Sadly i do not have the possibility to test the memory modules in another system.
Best regards. Erik Järlestrand, Sweden.

Hardware. A reboot will probably not do anything. From what I can tell, it's a CPU cache problem. If you do anything, shut the system down completely, turn the power off for a minimum of 20 seconds to let any residual electricty go away, the turn it back on. If the problem returns, you'll most likely need to either get a new CPU module or a new V100. I don't know if the CPU can be removed from the V100 motherboard, but since there are jumper settings for the speed I would assume that you can.

I publish a 41mb newsletter monthly into interactive pdf. It always becomes a file size of 4mb, 10% of original, when I save to pdf. This month my newsletter is 41mb and it drops to 11mb, 25% of original. I have re-sized all pictures, deleted pages separa

I publish a 41mb InDesign newsletter monthly into interactive pdf. It always becomes a file size of 4mb, 10% of original, when I save to pdf. This month my newsletter is 41mb and it drops to 11mb, 25% of original. I have re-sized all pictures, deleted pages separately, have gotten the file size down to 16mb and it drops to 7mb, 45% of original.
I have gone back and saved Feb and March and it saves to 10% of original, as it did before, and I use the same mechanism to save now.
I have gone to Acrobat Pro and optimized down to 8.8mb, but the quality is not acceptable.
What other variable is there that I haven't discovered?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Problem with JPanel sizing!

Hi,
Just having a bit of difficulty with the sizing of JPanels. For example, if I create a JPanel and add it to a Frame, no matter what I set the size to the JPanel fills the entire Frame. I don't really know whats going on here and I'm just making guesses! If anyone has a good resource on the whole sizing thing or can point out what I'm doing wrong, that would be great. Thanks!
// Constructor
public void ClassName()
        mainWindow = new JFrame();
        mainWindow.setSize(mainWindowWidth, mainWindowHeight);
        mainWindow.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        JPanel aPanel = new JPanel();
        aPanel.setSize(mainWindowWidth/2,mainWindowHeight/2); );
        aPanel.setBackground(Color.GREEN);
        mainWindow.add(aPanel);
        mainWindow.validate();
}Edited by: LeWalrus on May 18, 2009 5:03 AM

By default, JFrame uses a BorderLayout which gives the center component (your panel in this case) all available height and width.
For absolute positioning you need to use a null layout.
If you want a layout manager that can let your panel fill half the height/width, I think it might be possible with GridBagLayout or more recommended MiGLayout (but that adds a third party jar dependency).
See the [layout tutorial|http://java.sun.com/docs/books/tutorial/uiswing/layout/index.html].

Problem with Photos and Camera and Sizing Set

I have a 3gs and upgraded to 4.0. Things seemed fine but yesterday when I opened up the Camera Roll in Photos there was 1 picture showing and a large black rectangular box. No other photos were showing. I tapped on the black box and it showed all the photos using the slider to go from 1 to the next. I couldn't figure out how to get rid of the black box so that all the photos showed up normally, so I deleted each of the photos. The size of the box shrank as each photo was deleted. Then when I went into Photos, it opened with an empty screen and immediately closed. I then tried to use the Camera and it started up and immediately closed. So I sent myself an email with a photo and saved it to Photos. Its there and so is the black box! Now the camera will work! To further complicate, I decided I'd use the photo for wallpaper. Problem is I can't size it!! I can move it and size it with my fingers, but then when I release, it immediately pops back to full size and I can't "Set" the image size. Does anyone have any idea what's going on!!

Well I solved it. I uploaded my photos to My Gallery. Then I took a photo with the camera and saved it. I then deleted all the other photos except the one I just took. Then I exited Photos and then came back in and it was working fine, so I then downloaded the photos that I had just uploaded to My Gallery. Still have a problem though with sizing the photos for the Lock and Home screens. I can't get the Set button to hold a size. Any ideas on that?

NEW NICHE DEVICE NEEDED: a MINI sized moitor for portbility!!

The first time I saw the Mini, in my mind I envisioned an entire desktop ensemble comprised of Mini sized gadgets- smaller sized keyboards, little mice, cute little USB HD's and yes an itty bitty sized flat screen monitor like those digi picture frames that everyone is making! This is the biggest no brainer solution which so far has escaped the entire industry!
The Mini,after all is no smaller and no more portable than the size of the largest periphrial device in the desktop system.The smallest monitor sold in any retail store is currently 17" diag. and what we need is half that size. Funny how everyone jumped on the Mac Mini fashion statement to make external drives and every other kind of USB periphrial device within the chassias size of the Mini which was smart niche marketing...except they neglected to exploit the ultimate ADVANTAGE the Mini could afford as being the smallest most power and capable desktop system. Perhaps Apple neglected to embellish this advantage in order to prevent the affordable Mini from hurting its laptop sales.Just a theory. But third party vendors have also ignored this obvious design advantage and have not given us any Mini sized keyboards and monitors.
Now we see so called Mac Mini-designed keyboards that are smaller than those huge surfboard sized ergonomic shaped padded boards that serve well as a desktop bed pillow and arm rest but these new keyboards are really just the old skool no-frills boards that are smaller than the new styled surfboard sized ones.
While I can carry my Mini +my 500Gb USB external drive +mouse +power adaptor inside a cute leather shaving kit bag, the modularity factor becomes a JOKE when I walk into a Starbucks or Public Library with a 22" Flat screen monitor under one arm and my little shaving bag in my hand!!I got yelled at by two fat ladies at the Library when after asking them if I can plug my Mini into their ac wall socket I went to my car and returned with my fullsized roller suitcase containing my shaving bag with Mini Plus my billboard sized flat screen monitor.
"We don't allow HUGE MAYFLOWER MOVING TRILER SIZED suitcases inside the Public Library ,sir!! YOU MUST LEAVE AT ONCE OR GET RID OF THAT SUITCASE!"
"But,madame sir, this is my Mac "MINI"..its mini mini mini mini OTHERWISE I WOULD HAVE TWO ROLLER SUITCASES-One for my Mac Tower of Power and one for my billowing billboard sized monitor!!!!", I pleaded. Then I rolled my empty roller suitcase outside (its back-up beeper beeping as I carefully navigated through the metel detector gates.UuuuGhhhh
Watch...someone flunky engineer in some company somewhere will read this post and get a light bulb over his otherwise empty skull and get himself one huge promotion by sketching a new Mac Mini 10 " flatscreen monitor that sells cheap for $100! I'm here waiting with cash in hand...

Google is your friend.
I got a bunch of hits on +portable monitors+, however I have used these folks for personal projects before: lilliput
Folks started using these things in car installations of home computers, and a niche market for folks that want portable monitors was born.
Luck-
-DP

NEW NICHE DEVICE NEEDED: a MINI sized monitor for portbility!!

The first time I saw the Mini, in my mind I envisioned an entire desktop ensemble comprised of Mini sized gadgets- smaller sized keyboards, little mice, cute little USB HD's and yes an itty bitty sized flat screen monitor like those digi picture frames that everyone is making! This is the biggest no brainer solution which so far has escaped the entire industry!
The Mini,after all is no smaller and no more portable than the size of the largest periphrial device in the desktop system.The smallest monitor sold in any retail store is currently 17" diag. and what we need is half that size. Funny how everyone jumped on the Mac Mini fashion statement to make external drives and every other kind of USB periphrial device within the chassias size of the Mini which was smart niche marketing...except they neglected to exploit the ultimate ADVANTAGE the Mini could afford as being the smallest most power and capable desktop system. Perhaps Apple neglected to embellish this advantage in order to prevent the affordable Mini from hurting its laptop sales.Just a theory. But third party vendors have also ignored this obvious design advantage and have not given us any Mini sized keyboards and monitors.
Now we see so called Mac Mini-designed keyboards that are smaller than those huge surfboard sized ergonomic shaped padded boards that serve well as a desktop bed pillow and arm rest but these new keyboards are really just the old skool no-frills boards that are smaller than the new styled surfboard sized ones.
While I can carry my Mini +my 500Gb USB external drive +mouse +power adaptor inside a cute leather shaving kit bag, the modularity factor becomes a JOKE when I walk into a Starbucks or Public Library with a 22" Flat screen monitor under one arm and my little shaving bag in my hand!!I got yelled at by two fat ladies at the Library when after asking them if I can plug my Mini into their ac wall socket I went to my car and returned with my fullsized roller suitcase containing my shaving bag with Mini Plus my billboard sized flat screen monitor.
"We don't allow HUGE MAYFLOWER MOVING TRILER SIZED suitcases inside the Public Library ,sir!! YOU MUST LEAVE AT ONCE OR GET RID OF THAT SUITCASE!"
"But,madame sir, this is my Mac "MINI"..its mini mini mini mini OTHERWISE I WOULD HAVE TWO ROLLER SUITCASES-One for my Mac Tower of Power and one for my billowing billboard sized monitor!!!!", I pleaded. Then I rolled my empty roller suitcase outside (its back-up beeper beeping as I carefully navigated through the metel detector gates.UuuuGhhhh
Watch...someone flunky engineer in some company somewhere will read this post and get a light bulb over his otherwise empty skull and get himself one huge promotion by sketching a new Mac Mini 10 " flatscreen monitor that sells cheap for $100! I'm here waiting with cash in hand...

Your assumption is that folks who need portability prefer to use a fragile battery powered toy with a PDA style rinky **** keypad with tiny trackball gizmo and that assumption is dead wrong. Proof lies in the keyboard/mice/periphrial device aisle of any computer store. You see tons of USB devices for laptops intended solely to provide desktop system features/capability that the laptop doesn't provide. An lets not forget to add the cost of repairing these fragile thin puters..replacing adaptor cords and battery packs etc . Soon you've got more $ tied up ina laptop than you ever intended.
Personally I've yet to meet ANY laptop user who LOVES the tricky pain in the a**
trackball navigation mechanism and compact PDA-like keypad. Everyone I know relies upon a USB mouse and most folks are plugging fullsize keybords into their slim fragile overpriced laptops because pecking on the rinky **** keypad toy greatly increases the risk of damaging or dropping the computer. ( They are merely trying to minimize the need to touch the machine as they work which is smart thinking ..its the desktop systems design strategy as well.
The machine itself need not be touched and so we use wireless or USB periphrial devices . The Mini therefore is classified as a desktop but by definition "desktop system "does not preclude the need nor capability for modular portability and besides the MAC MINI IS BY FAR MORE DURABLE AND IMPACT RESISTANT THAN ANY LAPTOP so there goes your premis out the window.
I'll bet you one dozen ac powered laptop chiller pads, two sticks of DDR RAM and five laptop replacement power adaptors/battery chargers ('cause you laptop users seem to go through these pricey adaptors/cords faster than alkaline
batteries in a boombox at a beach bikini contest!) that if you displayed a Mac Mini with a small 10"screen sitting beside it and full size keyboard/mouse priced for $850 in the Apple store laptop sales would puke.
There's no debate that when you need thin notebook sized
modularity and battery pwr the laptop is the only solution.
I've not been hampered by the lack of battery powerpack just the lack of
a small monitor.

I am trying to print a passport sized headshot and I get a full page photo. How to I print out a smaller size?

I am trying to print a passport sized headshot and I get a full page photo isntead. I downloaded the shot from i photo and chose "small" but it didn't help.
I also cropped the photo on iphoto to the dorrect size but no difference. I have a Canon MX 870 printer. Please advise.

In iPhoto select the photo and print - select the paper size and a custom print size (2x2 i believe for passports) and print
LN

XML Publisher - OPP log: Output file was found but is zero sized - Deleted

Hi,
I have created one Main template and sub-template is called from it. I am working with Oracle Apps version 12.1.1. XML Source file gets created using rdf file attached to the concurrent program. Now after registering main template with the required concurrent program when i tried to execute it "View Output" button shows XML souce data instead of PDF report which i have called using main template. Log file was showing following error,
Executing request completion options...
Output file size:
33140
------------- 1) PUBLISH -------------
Beginning post-processing of request 3739501 on node ORAAPP13 at 09-AUG-2011 22:16:38.
Post-processing of request 3739501 failed at 09-AUG-2011 22:16:51 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT   -------------
Not printing the output of this request because post-processing failed.
Finished executing request completion options.
And the OPP service log has following error, Can anyone guide me to solve this error.
Template code: AERO_INV_MAIN
Template app: XXAV
Language: en
Territory: US
Output type: PDF
[8/9/11 10:16:51 PM] [339827:RT3739501] Output file was found but is zero sized - Deleted
[8/9/11 10:16:51 PM] [UNEXPECTED] [339827:RT3739501] java.lang.reflect.InvocationTargetException
     at sun.reflect.GeneratedMethodAccessor66.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:611)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:239)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:302)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
Caused by: java.lang.StackOverflowError
     at java.text.DecimalFormat.subformat(DecimalFormat.java:877)
     at java.text.DecimalFormat.format(DecimalFormat.java:674)
     at java.text.DecimalFormat.format(DecimalFormat.java:608)
     at java.text.SimpleDateFormat.zeroPaddingNumber(SimpleDateFormat.java:1203)
     at java.text.SimpleDateFormat.subFormat(SimpleDateFormat.java:1142)
     at java.text.SimpleDateFormat.format(SimpleDateFormat.java:899)
     at java.text.SimpleDateFormat.format(SimpleDateFormat.java:869)
     at java.text.DateFormat.format(DateFormat.java:316)
     at oracle.apps.fnd.security.CallStack.getInstance(CallStack.java:97)
     at oracle.apps.fnd.security.DBConnObj.setBorrowingThread(DBConnObj.java:990)
     at oracle.apps.fnd.security.DBConnObj.setBorrowingThread(DBConnObj.java:973)
     at oracle.apps.fnd.common.Pool.costBasedSelection(Pool.java:1885)
     at oracle.apps.fnd.common.Pool.selectObject(Pool.java:1686)
     at oracle.apps.fnd.common.Pool.borrowObject(Pool.java:950)
     at oracle.apps.fnd.security.DBConnObjPool.borrowObject(DBConnObjPool.java:584)
     at oracle.apps.fnd.security.AppsConnectionManager.borrowConnection(AppsConnectionManager.java:330)
     at oracle.apps.fnd.common.Context.borrowConnection(Context.java:1719)
     at oracle.apps.fnd.common.AppsContext.getPrivateConnectionFinal(AppsContext.java:2314)
     at oracle.apps.fnd.common.AppsContext.getPrivateConnection(AppsContext.java:2251)
     at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2108)
     at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:1918)
     at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:1762)
     at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:1775)
     at oracle.apps.fnd.common.Context.getJDBCConnection(Context.java:1453)
     at oracle.apps.fnd.cache.GenericCacheLoader.load(GenericCacheLoader.java:170)
     at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1500)
     at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:362)
     at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:211)
     at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:171)
     at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148)
     at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1294)
     at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1149)
     at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:1118)
     at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1085)
     at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1072)
     at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:595)
     at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:602)
     at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:579)
     at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:533)
     at oracle.apps.fnd.common.AppsContext.<init>(AppsContext.java:301)
     at oracle.apps.xdo.oa.schema.server.OAURLConnection.getAppsContext(OAURLConnection.java:121)
     at oracle.apps.xdo.oa.schema.server.TemplateURLConnection.getInputStream(TemplateURLConnection.java:89)
     at java.net.URL.openStream(URL.java:1009)
     at oracle.xdo.parser.v2.XMLReader.openURL(XMLReader.java:2353)
     at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:270)
     at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:256)
     at oracle.xdo.parser.v2.XSLBuilder.processIncludeHref(XSLBuilder.java:1045)
     at oracle.xdo.parser.v2.XSLBuilder.processImportHref(XSLBuilder.java:984)
     at oracle.xdo.parser.v2.XSLBuilder.processImport(XSLBuilder.java:949)
     at oracle.xdo.parser.v2.XSLBuilder.startElement(XSLBuilder.java:373)
     at oracle.xdo.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1252)
     at oracle.xdo.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:338)
     at oracle.xdo.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:285)
Regards,
Priyanka

And metalink note 1100253.1 states that this issue (java.lang.StackOverflowError) might be caused by a too large set of data to be sorted in the layout file. Recommendation is to removed the sort from the layout file and instead sort the data already in the data definition.
regards,
David.

Print Sizing and Quality Issues

When I print PDF documents I have issues with sizing and quality. I only have this issue with my Mac. Windows prints the files as they should be. I've tried two different printers, both over network. It doesn't matter whether I am in Adobe or in a browser. Basically it oversizes the documents and cuts off the edges. The quality on images and logos is severly degraded. This probelm existed in Lion and now in Mountain Lion. Any help?

What we need are the clip properties & sequence settings in Final Cut Express. Your screenshot is from a Finder window.
It would appear you have a clip with nonstandard frame size (1366x768) in an H.264 file. FCE cannot edit this material. FCE is limited to specific codecs and frame sizes. You need to convert your clip to QuickTime/Apple Intermediate Codec. If it's highdef widescreen then convert it to QT/AIC 1920x1080i. Try using MPEG Streamclip to convert the source clip.
You also need to be using a matching Easy Setup in Final Cut Express. If your source media file is QT/AIC 1920x1080i then you should select the AVCHD Apple Intermediate Codec 1920x1080i60 Easy Setup in FCE -AND- then create a new sequence before importing your clip into FCE and placing it in your sequence (timeline)

MRP Lot-Sizing Procedures PK

Hi experts,
When we use lot-sizing procedures PK, I have a problem about it.
Can you please kindly help me.
The problem is.
When we run MRP and get the release date as past date in purchase requisition.
I would not like system to propose release date as past date.
Do we need more configuration for using lot-sizing procedures PK ?
The settings are mentioned as below.
* material master
- Lot size in MRP1 view : PK
- MRP Type in MRP1 view : PD
- Procurement type in MRP2 view : F
* MRP parameters
- Processing key : NETCH
- Create purchase req. : 1 (Purchase requisitions)
- Delivery schedules : 3 (Schedule lines)
- Create MRP list : 1 (MRP list)
- Planning mode : 1 (Adapt planning data (normal mode))
- Scheduling : 2 (Lead Time Scheduling and Capacity Planning)

please read below for the detail explanation of the release date.
please check the example part of below.
wish it help.
tks.
Purchase Requisition Release Date
Specifies the date on which the purchase order
should be initiated on the basis of the purchase
requisition.
The release date is based on:
The
     purchasing department processing time defined for the plant
The
     planned delivery time from the material
     master record or purchasing
     info record
The
     delivery date
The
     goods receipt processing time from the material master record
Note
The planned delivery time from the
purchasing info record and the GR processing time are only taken into account
if the purchase requisition was generated via materials
planning.
Example
Processing time Planned del. GR processing
Purchasing time time
|----------|---------------------|--------|
Release PO Delivery Date
date date date required
Date required: 01.10.2007
GR processing time: 2 days (working days)
Planned delivery time: 10 days (calendar days)
Purchasing dept processing time: 2 days (working days)
For the material to be available on the
date it is needed, the purchase requisition must be released on 13.09.2007
(requirement date less GR processing time, planned delivery time, and
purchasing department processing time).

Getting zero-sized reply error when running report from SQL query

Hi,
I have a Report from SQL Query in Portal. When I select Excel in Output Format and then run the report, it works properly, but when I select HTML in Output Format, the report works if the rows returned are not so many (I've been able to display the report for up to 701 rows), but when I try selecting a value from the LOV that selects many rows, I get the following error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: <data suppressed>
The following error was encountered:
Zero Sized Reply
Squid did not receive any data for this request.
Any ideas on how to fix this? Why does the number of rows returned affect the report this way?
Thanks,
Lorena

Problem comes when any of the filter is applied in any one of the cases selected from the GUI.Do you mean that the problems only shows when you run the report in your browser via 9iAS?
Which version are you using?
Can you post the before report trigger?

Getting Zero Sized Reply error in report from SQL query

Hi,
I have a Report from SQL Query in Portal 3.0.9. When I select Excel in Output Format and then run the report, it works properly, but when I select HTML in Output Format, the report works if the rows returned are not so many (I've been able to display the report for up to 701 rows), but when I try selecting a value from the LOV that selects many rows, I get the following error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: <data suppressed>
The following error was encountered:
Zero Sized Reply
Squid did not receive any data for this request.
Any ideas on how to fix this? Why does the number of rows returned affect the report this way?
Thanks,
Lorena

Hi,
I have a Report from SQL Query in Portal 3.0.9. When I select Excel in Output Format and then run the report, it works properly, but when I select HTML in Output Format, the report works if the rows returned are not so many (I've been able to display the report for up to 701 rows), but when I try selecting a value from the LOV that selects many rows, I get the following error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: <data suppressed>
The following error was encountered:
Zero Sized Reply
Squid did not receive any data for this request.
Any ideas on how to fix this? Why does the number of rows returned affect the report this way?
Thanks,
Lorena

Re-sizing and Pasting in Elements 12

I've just got Elements 12 and I'm having difficulty getting started.
The first thing I need to do, is to re-size a load of images - I need them to be a specific size in centimetres. I don't care how many pixels they are, or how big the file is.
However, whenever i try re-sizing, and then open the image in something else, it hasn't really changed size - it's just set to print at that size in elements. As I'm not printing them, I'm sending them digitally elsewhere to be printed, that's no good to me- is there any way to actually change the size.
Once I've got the images resized, I then want to paste them onto a slightly larger black background. However, I don't seem to be able to paste between files. Is this normal?
To sum up:
I have a load of jpegs and pngs of various sizes, I want to get them all to 6.12 x 8.6 cm, then paste them into a black background 6.4 x 9 cm (providing a thin border against the edges being cropped int he printing process) and save as jpegs. These jpegs will then be uploaded to a printing company via the internet.
I'd hoped this would be a fairly simple process, but it seems to be impossible. Can anyone help?

For printing, it desirable to have the resolution in the range 240-300px/in.
You can convert the ruler scale to metric by right clicking on the ruler. This will help you to visualize the dimensions for reference.
On the crop tool's option bar, enter 6.12cm and 8.6cm for w & h (depending on portrait/landscape orientation.) Enter resolution 240px/in in the resolution field.
Drag out the crop shield to embrace what you wish to retain, then commit with the green checkmark.
Set your foreground color chip to black
Go to Select menu>all
Open a blank layer above the background layer
Goto Edit menu>Stroke(outline) selection. Try stroke width 5px, position:inside. OK
Press CTRL+D to get rid of the marching ants.
You can adjust the black border (stroke width) to suit - simply delete the layer created in step #5, and replace it.

Quicksizer_Server sizing

Similar Messages

Maybe you are looking for