Quicktim VR Controller is not showing eventhough it is set to true

The controller is not showing up for me when I embed a Quicktime file.
Here is the URL:
http://www.mack-cali.com/props/tour/?propid=NY
The controller is set to "true" but still not showing. Is there some way to troubleshoot this?
Please Help.
Thank You,

http://www.mack-cali.com/props/quicktime/movies/NY-movie-1.mov
You've forgotten to add the required height and width code. If you want to display your file at a smaller size your need to add aspect="true".
Be sure to add 16 pixels to the movie height to allow room for the controller.

Similar Messages

Wism controller does not show url redirection spalash page

Hi
Wism controller does not show url redirection/splash page .
client takes the ip from the dhcp server. when browsing its not going to the authentication page as usual
Thank you

Can you elaborate on your issue... really hard to follow. To me, it seems like you want to use a guest splash page. The client associates to the open guest ssid and get's an ip address. Now the user has to open a browser to get the portal page correct? This has nothing to do with the WLC, but the OS on the device. Some devices can detect if no internet is present after authentication and obtaining an address. This means the device will automatically open a browser to present the user with the splash page. Other devices will require the user to open a browser to get the login screen.
Scott

Why are declined events NOT showing on iPhone iOS7 (setting is marked to "on")

Apparently I and some of my colleagues are having the OPPOSITE issue from most.
We are syncing with Google Calendar.
We have set "Show Declined Events" to ON
Declined Events are NOT showing on iCal.
Any ideas?
Thanks.
Richey

I noticed this too. I have a Google Apps for Business account through work.
This happens when I have Gmail configured as ActiveSync. But when using CalDAV - it isn't a problem. Does anyone have a solution or more informaiton on this topic?

Firefox's option bar for saving username and passwords will not show, I have it set to remember passwords for sites. Can sites be added manually?

I was using Norton to remember my user names and passwords, however I do not use Norton any longer. Firefox does not give me the option of saving passwords even though I have it set to remember them.
There are no sites in the exceptions list. How can I reset Firefox so the option bar shows?

* Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode
* In Private Browsing mode some menu items are disabled (grayed) and features like visited links are disabled and not showing
* You are in Private Browsing mode if you see "Tools > Stop Private Browsing", possibly grayed
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Automatically start Firefox in a private browsing session"
See also http://kb.mozillazine.org/Password_Manager

Firefox 6 (& 7.0.1) download window is not showing on multiple monitors set up

I have a dual monitor setup - Macbook Pro screen as secondary and an external monitor as primary screen.
I have been running Firefox 3.6.x without any problem.
Only just updated to Firefox 6 and the problem appear - download window does not show up.

Just downloaded and want to see whether FF 7.0.1 would be any diferent, but nop. The problem still exist even the hardware accelaration is switched off as some users had suggested. Frustrating really...

Flash is not visible when transparent is set to true

Hi everyone. I'm writing an application in HTML and
Javascript which uses <OBJECT> and <EMBED> to display a
flash. The flash is invisible when transparent = false in the
application settings xml file.
I used the following to HTML code to display the flash:
quote:
<p width="100%" align="center"><embed pluginspage="
http://www.adobe.com/go/getflashplayer"
src="
http://www.yourminis.com/Dir/GetContainer.api?uri=yourminis/yourminis/mini:youtube"
wmode="transparent" width="370" height="280"
FlashVars="height=270&xheight=280&xwidth=370&width=360&uri=yourminis%2Fyourminis%2Fmini%3 Ayoutube&swfurl=%2Fwidget%5Fyoutube%2Eswf&"
type="application/x-shockwave-flash"
allowScriptAccess="always"></embed><br /></p>
This is a flash file that is designed to run on a domain
other than where the flash file is hosted on. More information on
the flash at
http://www.yourminis.com/minis/yourminis/yourminis/mini:youtube
So the question is... how do I display a flash file when
transparent is set to true?
OS: Windows XP
CPU: Intel Centrino Pro

This means that the SWF is written so that it only works when
embedded in a web page. When you add the SWF to the stage as a
stand-alone display object using addChild() it is not being hosted
in the web page.
You have 2 options:
1. Modify the SWF code (if possible) to remove the
ExternalInterface requirement. You can write code in your AIR
application javascript to subscribe directly to events from the SWF
using addListener() and call functions directly on the SWF object
(Flash/Actionscript is not my primary development environment... so
if I have gotten the terminology wrong I apologize, but I HAVE
written a flash application that worked as I describe). My SWF
actually works embedded in HTML or not using the code "if
(ExternalInterface.available) {
ExternalInterface.addCallback("setIsPlaying", setIsPlaying ); }"
2) Somehow add a HTMLLoader in a new child window (with
transparent = false) to the stage as a new child. I have not yet
figured out exactly how to do this, so If anyone can provide
information on how to do this, I too would be appreciative.

New Domain Controller does not show in our different site's Domain controller's Sites and Services

Hi,
we have two sites in our AD environment. OMA site and NY site. we have three domain controllers in our OMA site and two domain controllers in our NY site. All our DCs are windows server 2008R2 except one in our OMA site that is 2003R2 the domain
functional level is also 2003R2.
We decided to raise our functional level to 2008R2. I added a new domain controller in our OMA site and transferred all FESMOS from the DC that was running 2003R2 to this new domain controller.
the issue now is that our NY site does not make any connection with the new domain controller in OMA site. it does not even show it under sites and services. I have checked the DNS settings and everything. if you try to replicate the connections
from NY site it gives the following error: "The naming context is in the process of being removed or is not replicated from the specific server."
can anyone plz tell me why this is happening mt brain is just frozen at this moment and cant figure out why is this happening

Just noticed this replication issue has been going on for a while now but we never noticed until I added new DC. here is the error log for the NY site DC.
Log Name:      Directory Service
Source:        Microsoft-Windows-ActiveDirectory_DomainService
Date:          1/4/2014 8:11:40 AM
Event ID:      2042
Task Category: Replication
Level:         Error
Keywords:      Classic
User:          ANONYMOUS LOGON
Computer:      NORDC1.vertrue.com
Description:
It has been too long since this machine last replicated with the named source machine. The time between replications with this source has exceeded the tombstone lifetime. Replication has been stopped with this source.
The reason that replication is not allowed to continue is that the two DCs may contain lingering objects. Objects that have been deleted and garbage collected from an Active Directory Domain Services partition but still exist in the writable partitions
of other DCs in the same domain, or read-only partitions of global catalog servers in other domains in the forest are known as "lingering objects". If the local destination DC was allowed to replicate with the source DC, these potential lingering object
would be recreated in the local Active Directory Domain Services database.
Time of last successful replication:
2013-05-16 15:26:38
Invocation ID of source directory server:
9236ac56-d046-4632-b072-acbe823c5f6c
Name of source directory server:
accde843-11b2-476c-9783-9b29252d0ba5._msdcs.vertrue.com
Tombstone lifetime (days):
90
The replication operation has failed.
User Action:
The action plan to recover from this error can be found at
http://support.microsoft.com/?id=314282.
If both the source and destination DCs are Windows Server 2003 DCs, then install the support tools included on the installation CD. To see which objects would be deleted without actually performing the deletion run "repadmin /removelingeringobjects
<Source DC> <Destination DC DSA GUID> <NC> /ADVISORY_MODE". The eventlogs on the source DC will enumerate all lingering objects. To remove lingering objects from a source domain controller run "repadmin /removelingeringobjects <Source
DC> <Destination DC DSA GUID> <NC>".
If either source or destination DC is a Windows 2000 Server DC, then more information on how to remove lingering objects on the source DC can be found at
http://support.microsoft.com/?id=314282 or from your Microsoft support personnel.
If you need Active Directory Domain Services replication to function immediately at all costs and don't have time to remove lingering objects, enable replication by setting the following registry key to a non-zero value:
Registry Key:
HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Allow Replication With Divergent and Corrupt Partner
Replication errors between DCs sharing a common partition can prevent user and compter acounts, trust relationships, their passwords, security groups, security group memberships and other Active Directory Domain Services configuration data to vary between
DCs, affecting the ability to log on, find objects of interest and perform other critical operations. These inconsistencies are resolved once replication errors are resolved. DCs that fail to inbound replicate deleted objects within tombstone lifetime
number of days will remain inconsistent until lingering objects are manually removed by an administrator from each local DC. Additionally, replication may continue to be blocked after this registry key is set, depending on whether lingering objects are
located immediately.
Alternate User Action:
Force demote or reinstall the DC(s) that were disconnected.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS Replication" />
    <EventID Qualifiers="49152">2042</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>5</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-04T13:11:40.963263500Z" />
    <EventRecordID>38018</EventRecordID>
    <Correlation />
    <Execution ProcessID="660" ThreadID="1596" />
    <Channel>Directory Service</Channel>
    <Computer>NORDC1.vertrue.com</Computer>
    <Security UserID="S-1-5-7" />
</System>
<EventData>
    <Data>2013-05-16 15:26:38</Data>
    <Data>9236ac56-d046-4632-b072-acbe823c5f6c</Data>
    <Data>accde843-11b2-476c-9783-9b29252d0ba5._msdcs.vertrue.com</Data>
    <Data>90</Data>
    <Data>Allow Replication With Divergent and Corrupt Partner</Data>
    <Data>System\CurrentControlSet\Services\NTDS\Parameters</Data>
</EventData>
</Event>

Updated controller but not showing right version

I just updated my 4404 controller with 7.0.116.0.
After I rebooted and check the version number on the monitor page, it tells me its still version
7.0.98.0. The weird thing is, is that the Emergency Image Version is what changed to version 7.0.116.0.

Check your swapped image: Check the WLC part towards the bottom. This will be a place to start ..
Iblogged about this a bit ago ..
http://www.my80211.com/cisco-wlc-cli-commands/
Controller and Access Point Image Swap
Access Point - Swapping the image can done by a single access point or by all access points
(WiSM-slot8-2) >config ap image swap all
(WiSM-slot8-2) >show ap image all
Total number of APs.............................. 2
Number of APs
Initiated............................................ 0
Predownloading.................................. 0
Completed predownloading.................. 2
Not Supported.................................... 0
Failed to Predownload.......................... 0
AP Name            Primary Image Backup Image   Status          Version        Next Retry Time Retry
TEST1                        7.0.98.0            6.0.196.159    Complete        7.0.98.0       NA               NA
TEST2                        7.0.98.0            6.0.196.159    Complete        7.0.98.0       NA               NA
Controller- Swapping the image on the controller
(WiSM-slot8-2) >config boot primary (backup)
(WiSM-slot8-2) >show boot
Primary Boot Image............................... Code 7.0.98.0 (active)
Backup Boot Image................................ Code 6.0.196.159

Quicktime 7.1.3 not showing the Flash FLV Exporter option.

I have a macbook with FCP 5.1.2, Quicktime 7.1.3 and Flash Pro 8 installed.
The same as with my G5, but different release of FCP (FCP 4.5 HD in G5)
On my G5 all is fine. I see the FLV export plug in.
The problem is in my Macbook : I can't see the FLV export plug option in Quicktime (export) nor in FCP (file>export>via Qt conversion).
I've made the same installation process in both machines.
Perhaps a problem with the Flash 8 Professional installation on Intel Macs ?
(That installation was well finished)
Anyway, I can encode with the FLV standalone encoder that comes with Flash 8 pro, but sometimes the plug in is a shortcut way to get a FLV file on the fly.
Could anyone help me to resolve that situation ?
Many thanks in advance. I always got a solution from you Guys!
Daniel

QuickTimeKirk, thanks for the reply.
Yes, I think as you that the problem is from FLV exporter from Flash 8. It is not Universal. I will not go backward with QT. I prefer to wait until the UB Flash 8 Pro see the light..... or Flash Pro 9 (for sure it will be Universal)
Thanks again !

Quicktime references and register not showing up

long story short, my windows installation corrupted, had to re-install windows
had my key in my notepad i saved, as this problem occured before...
installed itunes/quicktime, open quicktime, when i click register or preferences, nothing happens..
i've clicked rapair 3 times, same thing..
i've reinstalled 3 times, nothing happens, same result
Why is this happening?Any help?I can't register anymore
Refeerances and register doesn't work, just shows the vista loading circle and nothing, help?
Message was edited by: mix3dmessagez

Thank you, but sadly, the same thing occurs...I will copy and paste the contents of the file for you, maybe something is wrong
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>QTGlobalVarsCGWLocX</key>
<integer>100</integer>
<key>QTGlobalVarsCGWLocY</key>
<integer>100</integer>
<key>QTGlobalVarsMovieInspX</key>
<integer>0</integer>
<key>QTGlobalVarsMovieInspY</key>
<integer>0</integer>
<key>QTPrefsCaptureFormat</key>
<integer>0</integer>
<key>QTPrefsCaptureSaveLocation</key>
<string>C:\Users\Mikey\Desktop</string>
<key>QTPrefsFullScreenDispFSCtrls</key>
<integer>1</integer>
<key>QTPrefsFullScreenHideTime</key>
<integer>2</integer>
<key>QTPrefsFullScreenHideTimeSel</key>
<integer>1</integer>
<key>QTPrefsFullScreenLRFSSelect</key>
<integer>0</integer>
<key>QTPrefsFullScreenMovieOrSlide</key>
<integer>1075</integer>
<key>QTPrefsFullScreenPaintAllMons</key>
<integer>0</integer>
<key>QTPrefsFullScreenRGBCol</key>
<integer>0</integer>
<key>QTPrefsGeneralAutoPlay</key>
<integer>0</integer>
<key>QTPrefsGeneralHideEmptySel</key>
<integer>0</integer>
<key>QTPrefsGeneralMRUListLimit</key>
<integer>10</integer>
<key>QTPrefsGeneralOpenNew</key>
<integer>1</integer>
<key>QTPrefsGeneralPauseOnSwitch</key>
<integer>1</integer>
<key>QTPrefsGeneralShowCC</key>
<integer>0</integer>
<key>QTPrefsGeneralShowEqualizer</key>
<integer>1</integer>
<key>QTPrefsGeneralShowHotPix</key>
<integer>0</integer>
<key>QTPrefsGeneralShowTC</key>
<integer>0</integer>
<key>QTPrefsGeneralShowTCAbsoluteFrames</key>
<integer>0</integer>
<key>QTPrefsGeneralSoundBack</key>
<integer>1</integer>
<key>QTPrefsGeneralSoundFront</key>
<integer>1</integer>
<key>QTPrefsGeneralUseHighQual</key>
<integer>1</integer>
<key>QTPrefsOTHFullScreenPresMovie</key>
<integer>3</integer>
<key>QTPrefsSTDFullScreenPresMovie</key>
<integer>3</integer>
<key>QTPrefsWSFullScreenPresMovie</key>
<integer>3</integer>
<key>kQTPrefsGeneralShowSubtitles</key>
<integer>0</integer>
</dict>
</plist>

Quicktime Movie Controller Will Not Work in Web Browser

Regardless if it's Safari or Firefox, I cannot click any of the buttons on the movie controller when viewing my movies in a web browser. They work as intended in iWeb, however.

Well I figured it out. Apparently if the video is too low on the page it will not play. I had to change the Y value, moving it up, and it would magically play. Weird...

Ie9 flash object not showing when wmode is set

I'm searching and searching but do not find any solution for this.
We're having a flex web application that is working fine until now. We're using until recently the google maps flash api, unfortunately this is already deprecated and will disappear completely in september 2014. Therefor we moved the whole integration to the js v3 api, which is working fine. The whole thing is an overlay over the application, since everything is moved to js, I added the property wmode to the object in html and set it to opaque in order to be able to layer everything. It's working fine for most people, but some (including my boss) are seeing a blank screen. Seems that nothing happens (although the swf loads), and I can not figure out why. Same browser (ie 9 or 10), same flash player version (11.6.xxx). Browser cache cleared, flash player cache cleared...
Somebody having a clue? Removing the wmode-property solves the issue, but then I'm not be able to get my map on top of the application.
The swf is definetly loading since I see calls made to the server in order to login etc. It's also not a flash player issue. The swf-file is directly accessable and rendering if done so.
Thanks
Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">

<head>
    <title>${title}</title>
    <meta name="google" value="notranslate" />
    <meta http-equiv="X-UA-Compatible" content="IE=10; IE=9;"/>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    
    <style type="text/css" media="screen">
        html, body { height:100%; }
        body { margin:0; padding:0; overflow:hidden; text-align:center;
               background-color: ${bgcolor}; }
        object:focus { outline:none; }
        #flashContent { display:none;}
    </style>
    
    
    
    <script src="PlusOptixSync.js" language="javascript"></script>
    
     <script language="javascript">
        function getEIDxml()
          var strXML = document.MirageApplet.readCardAsXMLString() + " ";
          return strXML;
        function setOuterSize()
            var nomWidth = 1280;
            var nomHeight = 800; // 786 viewable in fullscreen
            var actWidth = nomWidth;
            var actHeight = nomHeight + 150 - 30; // fullscreen change coeff (ruimte die we winnen door f11) - taakbalk
            window.resizeTo(actWidth, actHeight);
            //window.outerWidth = actWidth;
            //window.outerHeight = actHeight;
            //script die de F1 help functionaliteit van de browser afzet. Dit is nodig omdat IE de F1 functionaliteit van de flex applicatie onderdrukt
            document.onhelp=new Function("return false");
            window.onhelp=new Function("return false");
    </script>
    <script type="text/javascript" src="swfobject.js"></script>
    <script type="text/javascript">
        // For version detection, set to min. required Flash Player version, or 0 (or 0.0.0), for no version detection.
        var swfVersionStr = "${version_major}.${version_minor}.${version_revision}";
        // To use express install, set to playerProductInstall.swf, otherwise the empty string.
        var xiSwfUrlStr = "${expressInstallSwf}";
        var flashvars = {};
        var params = {};
        params.quality = "high";
        params.bgcolor = "${bgcolor}";
        params.allowscriptaccess = "sameDomain";
        params.allowfullscreen = "true";
        params.wmode = "transparent";
        var attributes = {};
        attributes.id = "${application}";
        attributes.name = "${application}";
        attributes.align = "middle";
        swfobject.embedSWF(
            "${swf}.swf", "flashContent",
            "${width}", "${height}",
            swfVersionStr, xiSwfUrlStr,
            flashvars, params, attributes);
        // JavaScript enabled so display the flashContent div in case it is not replaced with a swf object.
        swfobject.createCSS("#flashContent", "display:block;text-align:left;");
    </script>
      
      <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/2.0.0/jquery.min.js"></script>
      <script src="http://code.highcharts.com/highcharts.js"></script>
      <script src="http://code.highcharts.com/modules/exporting.js"></script>
      <script type="text/javascript" src="../js/util/Namespace.js"></script>
      <script type="text/javascript" src="../js/util/mirage-services.js"></script>
      <script type="text/javascript" src="../js/util/mirage-binding-utils.js"></script>
      <script type="text/javascript" src="../js/util/mirage-event-dispatcher.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-constants.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-theme.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-config.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-factory.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-zoomer.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-formatter.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-prototype.js"></script>
      <script type="text/javascript" src="../js/groeicurven-events.js"></script>
      <script type="text/javascript" src="../js/groeicurven-controller.js"></script>
      <script type="text/javascript" src="../js/groeicurven-flex-bridge.js"></script>
      <script language="javascript">
            initGroeicurvenFlexBridge("${application}");
      </script>
    
    <link rel="stylesheet" href="../css/google-maps.css">
    <script src="http://maps.googleapis.com/maps/api/js?sensor=false"></script>
    <script type="text/javascript" src="http://google-maps-utility-library-v3.googlecode.com/svn/trunk/styledmarker/src/StyledMarker.js"></script>
    <script type="text/javascript" src="../js/util/cvi_busy_lib.js"></script>
    <script type="text/javascript" src="../js/google-maps-events.js"></script>
    <script type="text/javascript" src="../js/google-maps-controller.js"></script>
    <script type="text/javascript" src="../js/google-maps-mediator.js"></script>
    <script language="javascript">
        function openMaps(data)
            document.getElementById('mapsContent').style.visibility ="visible";
            document.getElementById('optionsList').style.visibility ="visible";
            document.getElementById('activeCheckboxDiv').style.visibility ="visible";
            document.getElementById('mapsContent').style.zIndex = 100;
            onLoadHandler(data);
        function adresFoundHandler(marker, filtereEnabled){
            document.getElementById('mapsContent').style.visibility ="hidden";
            document.getElementById('optionsList').style.visibility ="hidden";
            document.getElementById('activeCheckboxDiv').style.visibility ="hidden";
            document.getElementById('activeCheckbox').style.visibility ="hidden";
            document.getElementById('mapsContent').style.zIndex = 0;
            clearLocations();
            ${application}.responseGoogleMaps(marker, filtereEnabled);
    </script>
    
</head>
<body scroll="no" onLoad="setOuterSize();">
    
    <div id="flashContent">
        <p>
            To view this page ensure that Adobe Flash Player version
            ${version_major}.${version_minor}.${version_revision} or greater is installed.
        </p>
        <script type="text/javascript">
            document.write("<a href='http://www.adobe.com/go/getflashplayer'><img src='get_flash_player.gif' alt='Get Adobe Flash player' /></a>" );
        </script>
    </div>
    <noscript>
        <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="${width}" height="${height}" id="${application}">
            <param name="movie" value="${swf}.swf" />
            <param name="quality" value="high" />
            <param name="bgcolor" value="${bgcolor}" />
            <param name="allowScriptAccess" value="sameDomain" />
            <param name="allowFullScreen" value="true" />
            <param name="wmode" value="transparent" />
            
            <object type="application/x-shockwave-flash" data="${swf}.swf" width="${width}" height="${height}">
                <param name="quality" value="high" />
                <param name="bgcolor" value="${bgcolor}" />
                <param name="allowScriptAccess" value="sameDomain" />
                <param name="allowFullScreen" value="true" />
            
            
                <p>
                    Either scripts and active content are not permitted to run or Adobe Flash Player version
                    ${version_major}.${version_minor}.${version_revision} or greater is not installed.
                </p>
            
                <a href="http://www.adobe.com/go/getflashplayer">
                    <img src="get_flash_player.gif" alt="Get Adobe Flash Player" />
                </a>
            
            </object>
            
        </object>
    </noscript>
    <noscript>Your browser does not support JavaScript!</noscript>
    <applet
      id ="MirageApplet"
      codebase = "AppletLibs"
      archive = "kg-eid-tools-2.6.jar,beidlib-1.1.jar,jdom-1.0.jar,joda-time-1.6.jar,commons-lang-2.4.jar"
      code     = "be.kg.mirage.MirageApplet.class"
      name     = "MirageApplet"
      hspace   = "0"
      vspace   = "0"
      style="width: 0px; height: 0px;">
        <param name="Reader" value="">
        <param name="OCSP" value="0">
        <param name="CRL" value="0">
        <param name="DisableWarning" value="true">
    </applet>
    <div id ="mapsContent">
        <h3 id="typeLabel">Google Maps</h3>
        <select id="optionsList"></select>
        <input id="searchInput" type="text"></input>
        <div id="activeCheckboxDiv">
            <input id="activeCheckbox" type="checkbox"></input>
            <label for="activeCheckbox">Toon enkel actieve locaties</label>
        </div>
        <button id="searchButton" type="button" class="secondElementButton">Zoeken</button>
        <button id="annuleerButton" type="button" class="annuleerButton">Annuleer</button>
        <ul id="locations" class="thirdElement"></ul>
        <div id="canvasMap"></div>
    </div>

This means that the SWF is written so that it only works when
embedded in a web page. When you add the SWF to the stage as a
stand-alone display object using addChild() it is not being hosted
in the web page.
You have 2 options:
1. Modify the SWF code (if possible) to remove the
ExternalInterface requirement. You can write code in your AIR
application javascript to subscribe directly to events from the SWF
using addListener() and call functions directly on the SWF object
(Flash/Actionscript is not my primary development environment... so
if I have gotten the terminology wrong I apologize, but I HAVE
written a flash application that worked as I describe). My SWF
actually works embedded in HTML or not using the code "if
(ExternalInterface.available) {
ExternalInterface.addCallback("setIsPlaying", setIsPlaying ); }"
2) Somehow add a HTMLLoader in a new child window (with
transparent = false) to the stage as a new child. I have not yet
figured out exactly how to do this, so If anyone can provide
information on how to do this, I too would be appreciative.

Mixer not showing up in sound setting or audio preferences

I have Logic x on my macbook pro and my Behringer XENYX X1204USB Mixer is not being recognised in logic at all and when I go into the sound setting on the macbook it isn't showing up in there either. I need help urgently cause I have a home studio to set up and need this mixer. Could you be of assistance to help me set up this mixer on logic x and my macbook.

Hi Malcolm,
Thanks for responding.
I do receive sound in my headphones and headset perfectly. I just assumed that "Headphones" would show up as an option in the Output list. I guess it doesn't have to, like it showed in the Skype tutorial...
My main problem now though, is the Input/recording. When I test with the Skype "test call" and Plantronics headset with the microphone, I can't hear my voice played back like I'm supposed to. The microphone is not recording. I assumed it was my Sound settings device options that were all wrong.
The Input shows Line In/Audio Line port only, and doesn't indicate any input level activity when I use the microphone part of the headset.
How do I get Input Level activity to be recorded? The microphone part of the headset plug is plugged into the microphone jack as required. The headphone part s okay.

HT1688 why in icloud my moms phone does not show up, everything is set up but the device is not shown. the ipad is shown in the find my phone but not her iphone on her account

Ok on my mom's acocunt in icloud the only device that is listed on th find my phone is her ipad. on her iphone it is turned on in the settings, and in privacy it is truned on and we still can not locate her iphone on the map we do have the phone so it is not lost the only thing icloud dose not list it, WHY??

Hi louisgonzalez78,
Thanks for visiting Apple Support Communities.
See this article for some troubleshooting steps that can help:
iCloud: Troubleshooting Find My iPhone, iPad, iPod touch, or Mac
http://support.apple.com/kb/ts4006
Regards,
Jeremy

Apps not showing up in privacy setting

I have an iphone 4s i downloaded apps such as dropbox and viber a need to turn on the privacy settings. However these apps are not recognised by the phone as when i go into privacy dropbox and viber are nowhere to be seen.

These are 3rd party apps, you should consult them.

Quicktim VR Controller is not showing eventhough it is set to true

Similar Messages

Maybe you are looking for