Quicktime 10.2 wil not run iMovie 9

Why won't quicktime 10.2 not run iMovie 9?

Because iTunes is 11.03 and you are way behind. Most things are now 10.7.5 or later and have moved to new code base.

Similar Messages

My latest itune update wil not run, error message An

My latest itunes update will not run, erro message reads An application has made an attempt to load the C runtime library incorectly.

Hi,
In addition to what Lewis mentioned, please also take a try with the following suggestions:
Method 1.
Change the settings to "Never check for updates (not recommended)", click OK, and then change it back to "Install updates automatically". After that, click check for updates.
Method 2.
Update Windows Defender first:
1. Make sure time is sync. 2. Update Windows defender first, then click check for updates.
Method 3. rebuild the SoftwareDistribution folder:
Goto start > type services.msc
Scroll down to find Windows Update service
make sure Windows Update service is stopped, else right click and stop it
Go to C:\Windows\SoftwareDistribution\ and delete all files in it
Come back to services.msc and start Windows Update
service
Hope this may help
Best regards
Michael Shao
TechNet Community Support

CS5 Wil not run .... and now CS6 won't either.

Ran CS6 just fine. Shut it down. Tried starting CS5 and it will not run. Gave up. Tried rerunning CS6 now it won't run.
Suggestions?
Joe

more infos maybe?
what OS would be nice to know for example.

Some swf file wil not run

I have a website with videos, Some of the videos will not
show, although some does. I have made all the clips myself and
there is no difference, beside the names.
I first make a fla file, then I publish it so I can get a swf
file, this is the way I have done it on all the files, but half of
them does not work. I can see them locally, but the users cannot
see them.

Does the flash file require any supporting files? If so, you might want to
verify that the supporting files are in the expected paths relative to the
*page* on which the .swf appears (and not relative to the .swf, itself)

Quicktime gets a file not found error in running of set up. tried downloading twice

Quicktime gets a file not found error in running of set up. tried downloading twice

Hi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task. I've attached the file. The "1 channel" task runs OK. The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip ‏353 KB

Quicktime not playing iMovie project

Hi, I recently completed a slideshow on iMovie and after exporting the file, quicktime will not play it. It's currently in .mp4 format. Currently I can only play it by opening up iMovie, which is very inconvenient; I'd like to be able to view it using quicktime so that I can play it on a PC as well if necessary.

Hello HazyCloud7
Check the settings for exporting to make sure that that it comes out the way you want it. You can also send it to iTunes to make sure that it comes out and can be viewed in iTunes on all computers.
Share to iTunes
http://help.apple.com/imovie/mac/10.0/#movfe89b94a2
Export a QuickTime file
http://help.apple.com/imovie/mac/10.0/#move6e0cb2ad
Regards,
-Norm G.

Emac will not connect to LCD projector while running iMovie

I am working on an eMac running 10.3.9. We have the eMac connected to an LCD projector in a computer lab setting. Things work fine - until we try to run iMovie on the projector. A message appears on the screen asking for a resolution of 1024 X 768. We have changed the resolution on the computer numerous times - yet the projector gives us this message each time. When the computer is unplugged from the projector - iMovie runs fine. We have successfully used this emac and the projector for iMovie earlier - today things have not worked!!!!!
Any help would be appreciated!

Hello Roger, if you have them installed in 10.6.7: Uninstall Virusbanner and Content Barrier (use a good Uninstaller). You don't need them at all. Instead in OS10.6.7 check if you have the Snow Leopard security update 003 installed (of which the database is almost daily updated automatically), in Lion already installed.
In Lion also do not use these apps, same story (malware db almost everyday auto updated).
It should work after that, if you do not have "exotic" system settings.
Lex

Quicktime installs on Windows 7 Home Premium 32-bit but will not run

Have installed the latest QuickTime 7 under Windows 7 Home Premium (32-bit) but it will not run when double clicking on the icon on the desktop. Can anyone assist me with this matter? iTunes works perfectly.

Hi cameronweir73!
Here is an article that will help you troubleshoot this installation issue with iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Here is another article that will help you troubleshoot this issue with Quicktime on your computer:
QuickTime: Windows troubleshooting tips
http://support.apple.com/kb/TA44469
Thanks for coming to the Apple Support Communities!
Regards,
Braden

When upgrading quicktime, I get an error code: -3, and itunes will not run.

when upgrading quicktime, I get an error code: -3, and itunes will not run. How do I fix?

i 'm very interest because on 3 PC , i have the same problem and i work at tv producer...

I movies work with sound in quicktime but not in imovie hd!!!

I have clips that worked in imovie hd before but all of a sudden the sound will not work, but they will work in quicktime....any ideas?

Welcome to iMovie Discussions.
Some clips - which started life not as DV camcorder clips, but might be .AVI, or somesuch, downloaded from the web, or shot as movies with a digital stills camera - may have audio in QuickTime but not in iMovie.
QuickTime understands and replays many different file formats (..see all the different file formats QuickTime Player can handle, in the right-hand column here..) ..some of which iMovie can't handle.
If your clips "..worked in imovie hd before but all of a sudden the sound will not work.." it might be because you'd had QuickTime open in the background, previously, or because you'd altered them in some way ..or maybe you 'Extracted' their audio, but don't have the check-boxes ticked for the audio tracks at the right-hand edge of the Timeline.
The most important question is: were these clips originally from a tape-based DV camcorder, or did you import them from something else, e.g; web, hard disc camcorder, DVD camcorder, .AVI or other iMovie-incompatible origins?

I can not export imovie 11 to youtube. I tried exporting with quicktime so I could upload through youtube,but it had no sound. Very frustrating. When I upload through youtube it looks as if it is working, but I get no confirmation. Tried it many times.

I can not export imovie 11 to youtube. I tried exporting with quicktime so I could upload through youtube,but it had no sound. Very frustrating. When I upload through youtube it looks as if it is working, but I get no confirmation. Tried it many times. What do I do?

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

ITunes and Quicktime not running after upgrade

After installing iTunes 5 I get the following error message when launching it:
'The instruction at "0xf4800000" referenced memory at "0xf4800000". The memory could not be "read".'
When trying to run a quicktime clip embedded in a Acrobat document I get the message:
'QuickTime Streaming Extras failed to load because the versions od QuickTime Streaming and QuickTime Streaming Extras do not match.'
If I try to uninstall or reinstall QuickTime I get:
'Error Number: 0x80040707
Description: DLL Function call crashed: QTInstallCode. QuickTimeUnInstallProc..'
The rest of the message is cut off.

well done, Ryan!
"From the command prompt run the following:
msiexec.exe /unregister
msiexec /regserver "
good gracious ... you had to do that to get the Cleanup utility to install?
prior to the new versions of the Windows Installer coming out, i only had to use that trick
b once
to get past an itunes installer error (and i only remember it because it showed up in an almost unique situation where you have to treat the last error in a chain of itune installer errors first) ... but you're about the third or fourth person reporting success with it in the past
b week.
it's a rarer sort of problem, still. but the latest Windows Installer updates just don't seem to have been sticking as well as earlier ones.
many thanks for reporting back!
love, b

There are several iMovies stranded in iMovie 5.0.2 as a result of an upgrade to OSX 10.5.8 which will not run IDVD 5. What is the siplest soluntion to this problem? What is the oldest iDVD that will run on 10.5.8 and still sevice iMovie 5? The co

iDVD 5 won't run on upgrade to 10.5.8

In 10.5.8 here I have iDVD 6.0.4, no idea if it works with iMovie 5 or not, only iMovie 3.0.3 here.

Quicktime plugin will not run in any browser including Safari! Help!

Quicktime plugin will NOT run in any browser. I've been reading a lot about this issue and it seems to be a widespread problem. I didn't have this issue a few weeks ago. perhaps it has something to do with OS 10.6.7? Help, desperate for a solution.

Post a URL? Not sure what you mean as it does not seem to be website specific. I can't view apple movie trailers on apple.com in Safari or Firefox. The plugins just are not there. I've download QT and it shows up in my Utilities folder but no where to be found within firefox plugins/add-ons - same goes for Safari but the plug-ins I do have ARE enabled. Each time I try, I get the install missing plugin prompt, which I do, and as stated before - nothing happens. I've read a lot about moving things in/out of internet plug-in folders in various places, preferences folders, etc. but no luck so far.
Thank you.

QuickTime video won't export to iMovie

I've been working on an iMovie project which is a series of screen capture recordings from QuickTime; the first two imported from my desktop perfectly fine and are now ready to edit in a new project, but suddenly I try to add a third and it simply won't appear. I go to File>Import>Movies and select the movie from my desktop, same as the previous two, and as usual the progress bar appears. It's a fairly long recording, so the exporting process claims to take an hour or two...the problem is, once the progress bar vanishes, nothing has uploaded/exported...the event/import library remains empty. I have tried this 3 times now, the same results each time (I've turned off auto shut down/energy saver temporarily to make sure nothing's interrupted).
I tried exporting the video to iMovie directly from QuickTime (File>Export To>iMovie). A progress bar appears but gets stuck in its initial loading window and never actually starts exporting...what could the problem be?? It may be worth noting my computer is beginning to "run low" on space, but I've received no notifications telling me my disk is completely full or anything like that. Would space restrictions cause these random malfunctions of import/exports...? Anything would help!! Thank you!

Hi
alt to Export back to Camera.
• Just set Camera in VTR/Play mode
• In iMovie Pref set "Playback via Camera"
• New tape and record
• In iMovie just press Play
I do this more often.
Deleting iMovie Pref file moght help
Free space on internal (start-up) hard disk 25Gb or more ?
General answer:
*Not knowing the origin to Your problem - General approach when in trouble is as follows:*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iMovie pref file - or rather start a new user/account - log into this and re-try
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08)
• Program miss-match: iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match: iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match: iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Screen must be set to Million-colors
iMovie pref file resides:
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named: com.apple.iMovie.plist
While iMovie is NOT RUNNING - move this file out to desk-top.
Now restart iMovie.
From LKN 1935: (in this case = iMovie HD (5), I tried it all, but nothing worked.
Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
to my Sony camcorders worked properly as it did before.
Yours Bengt W

Quicktime 10.2 wil not run iMovie 9

Similar Messages

Maybe you are looking for