Quicktime -5402 Bad Data Error

Good morning everyone,
I was going along fine watching some videos on the internet with my quicktime viewer when all of a sudden when I tried to load a presentation I get a -5402 "Bad Data" error. The video starts and plays about 11 seconds before stopping and will not continue. I tried it in Firefox and Internet Explore and with different videos. The version of the plugin is 7.0.3
Thank you!

I did change the datasource structure and emptied the Delta queue before scheduling the setup.
But there was a time gap between the start of setup and emptying of Delta queue.
Data got in the extraction Queue (before setup started) when User did some documents changes in R3 prod. after the empting of Delta Queue (RSA7) and transferring transports to R3 prod.
Hence, what needs to be done to the Extraction or how to empty the Extraction queue till the setup is complete if we are not freezing the user posting?
Is there any other way to avoid the user postings until the transports are gone to the prod box ?

Similar Messages

Unable to install. The stub received ve bad data error

how to fix error unable to install. The stub received ve bad data error in windows 8 operating system while installing HP printer driver

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
Please click on the below shown link to troubleshoot the issue
http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/the-stub-received-bad-data-e...
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

QuickTime out of date error...

Everytime I load QuickTime or load a program that makes use of it I get the following popup:
QuickTime
Some of your Quick Time software is out of date. You can fix the problem by updating to the latest version.
What I've tried...
reinstalling QuickTime.
uninstalling QuickTime and then reinstalling QuickTime.
upgrading to Pro.
Please HELP because nothing is working!!!!!!!!!!!!!!
Dell 8400 Windows XP

OK, After hours of trying here's what worked for me. I'm not sure if all these steps are necessary, but I did them all and it worked.
-Uninstall QuickTime
-delete folder C:\Program Files\QuickTime
-delete folder C:\Documents and Settings\(User)\Application Data\Apple Computer
-delete folder C:\Documents and Settings\(User)\Application Data\QuickTime
-delete folder C:\Documents and Settings\(user)\Local Settings\Application Data\QuickTime
-Reboot Computer
-Reinstall QuickTime

"Bad Data, too many results for shortname"

Every 10 minutes since October 13 the wikid error log has recorded the following error message:
*"Bad Data, too many results for shortname: username"*, always naming the same user, who is not actually doing anything.
Coinciding with that message at the same time every 10 minutes, the system log records 13 or 14 of the following:
*"Python\[15645\]: ••• -\[NSAutoreleasePool release]: This pool has already been released, do not drain it (double release)."*
15645 is a process owned by _teamserver, which would appear to confirm the connection between the python and wikid error messages.
Last clue: The messages (I have determined in hindsight) started while I was setting up the server to do vacation messages. The user named in the "Bad data" messages was the user who wanted to (and did) set up a vacation message at that time. They worked, too.
Anyone have any ideas about what is going on and how to fix it? BTW, google does not find even one page where this "Bad data" error message is mentioned.

Thanks for your response. To answer your questions:
+Are you using AD for your directory?+ No. OD master only.
+Are there users with duplicate shortnames in your directory system?+ No, and to double check, I searched with WGM and only the one came up.
+As a bit of background, the wiki server keeps an private index of user and group information so we can track user preferences, and the "Bad Data, too many results for shortname: username" error is triggered when we do a lookup in that index for a particular user and we (unexpectedly) hit duplicate entries. Are you seeing an issue with using the software, or just an annoying log message?+ It's hard to say (for me) what might be related. The directory or wiki related issues with the server include:
• A memory issue with slapd that eventually causes it to crash. (preceded by lots of "bdbdbcache: db_open(+various: sn, displayname, givenname, mail, maybe others+) failed: Cannot allocate memory (12)" and "logging region out of memory" and "index_param failed" errors.
• The wiki is slow, despite very light use.
• Wake from sleep (network clients with authentication required) can be very slow. Several minutes even.
Any suggestions you may have would be appreciated.

Streaming Error: Bad Data 5402

Hi there,
Whilst receiving a stream from our server QuickTime reports the following error in the player:
- Bad Data 5402
This corresponds with:
- -5402 - qtsBadDataErr
on: http://docs.info.apple.com/article.html?artnum=24938
We have been able to re-produce this error:
- on several PC's
- in MSIE 6.0
- with firewall disabled
We know the stream is ok because the stream plays back on other computers outside of the institution.
Can anyone provide advice on how to go about resolving this problem.
Many thanks,
Lloyd

It looks like this isn't going to get answered then...
But does anyone have any advice on what to do if i really need help with this. Is there a telephone for Apple support?
Many thanks
- Lloyd

Bad Image Data Error!

Hi,
I'm doing a project for a my class doing a simple sunrise/sunset program. I've noticed that if I either create simple images in fireworks and import them, or even images form the web, I get an error message saying "Bad Image Data Error!" and all the images turn to red squares.
Any ideas of how to fix this? I don't want to have create images in flash.
Thanks,
Avi

Oh and I forgot to add....I've experience this problem on both CS3 & CS4. Tried it on my desktop and laptop, both are Windows 7 64bit.

4404 boot error, Bad data CRC

HI,
i have a 4404 Controler and when it boots i get the error message,
Bad data CRC, i upgraded to OS 4-0-219-0 then 4-1-185-0 but now im getting the message
bzImage Image Integrity Check Failed (Bad Data CRC). Hanging
anything that i can do ?
Thanks
Dan

Try to revert back to the backup image on the controller. If this fails, it's probably bricked and you need to replace it under smartnet.

How to catch date errors and continue processing in a PL/SQL procedure

I'm updating a date field with dates constructed from day, month and year fields. The incoming data has many instances of day and month that are not valid dates, ex 11 31 2007. There is no 31st day in November.
I would like to write a pl/sql script to scan the table containing these values and log the rows that produce conversion errors.
I thought I could do this with exceptions but there are no exceptions that correspond to the ORA-01847 error for mismatched day and month.
Here is what I tried (the print procedure is a local wrapper for DBMS_OUTPUT.put_line):
PROCEDURE date_check IS
start1 DATE ;
BEGIN
select to_date(nvl(yearcollected,'9999') ||'/'|| nvl(monthcollected,'01') ||'/'|| nvl(daycollected,'01'),'YYYY/MM/DD'))) into start1 from incoming_data where id=1 ;
     BEGIN
          update temp_test set test_date = start1 where id=1 ;
     EXCEPTION
          WHEN OTHERS THEN
          print('Date error message from exception block');
     END;
print('Processing continues after handling date exception') ;
END date_check ;
Is there a way to catch this kind of error and continue processing after logging a message?
-=beeky

Hi, Beeky,
There are lots of different error messages associated with bad dates. Rather than try to catch them all, I use a BEGIN ... EXCEPTION block that contains nothing but a TO_DATE call. This is one of the rare occassions when I think "EXCEPTION WHEN OTHERS" is okay,
The following function comes from a package. If you want to make a stand-alone function, remember to say " *CREATE OR REPLACE* FUNCTION ...".
--          **   t o _ d t   **
--     to_dt attempts to convert in_txt (assumed to
--          be in the format of in_fmt_txt) to a DATE.
--     If the conversion works, to_dt returns the DATE.
--     If the conversion fails for any reason, to_dt returns in_err_dt.
FUNCTION     to_dt
(     in_txt          IN     VARCHAR2                    -- to be converted
,     in_fmt_txt     IN     VARCHAR2     DEFAULT     'DD-MON-YYYY'     -- optional format
,     in_err_dt     IN     DATE          DEFAULT     NULL
RETURN DATE
DETERMINISTIC
AS
BEGIN
     -- Try to convert in_txt to a DATE. If it works, fine.
     RETURN     TO_DATE (in_txt, in_fmt_txt);
EXCEPTION     -- If TO_DATE caused an error, then this is not a valid DATE: return in_err_dt
     WHEN OTHERS
     THEN
          RETURN in_err_dt;
END     to_dt
;

Java.io.IOException: data error cyclic redundantie check

Dear all,
I did a fresh install of JDeveloper 10.1.3.2.0 with JHeadstart 10.1.3.26 on my computer. These are the versions we use.
I've made a database connection, so that's allright.
When I open JDeveloper and I try to add an Application, we allready have made(with the same versions) I get the next error in JDeveloper: xxx.jws was saved in version file format and cannot be opened with an older version of JDeveloper. The version is not mentioned...
In the terminal I get the messeage of my subject: java.io.IOException: data error cyclic redundantie check.
I'm sure i'm using the same versions.
Does anybody know what went wrong?
regards,
Marcel.

It's like the data stream is getting messed up...so I would think of a few things:
1) Bad memory?
2) Bad connections?
3) Bad disk?
4) Viruses
Anything that can screw up the data steam.
Other than that....maybe as simple as reinstall the JVM and put new compiled code out there and see if it behaves.

The operating system returned error 23(Data error (cyclic redundancy check).)

My Stored Procedures and Jobs Showing this Error. Even though i can able to access the data throgh SSMS in Database Engine.Please help on this.
Executed as user: RMS\Administrator. The operating system returned error 23(Data error (cyclic redundancy check).) to SQL Server during a read at offset 0x000006684a2000 in file 'F:\RMSLiveData\RMS.mdf'. Additional messages in the SQL Server error log and
system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors;
for more information, see SQL Server Books Online. [SQLSTATE HY000] (Error 823). The step failed.
Thanks
RehaanKhan. M

DBCCCHECKDB('DBNAME',REPAIR_ALLOW_DATA_LOSS)
For crying out loud! Don't you have any shame!
There are situations where you may have to run DBCC CHECKDB with the option REPAIR_ALLOW_DATA_LOSS, but it is not the first thing you shold try if the database seems to be corrupt. Particularly, you should first make sure that you work on a copy of the database
files. REPAIR_ALLOW_DATA_LOSS means that DBCC CHECKDB has carte blanche to throw all pages it can piece together - which could be about all data pages if it is that bad.
Corruption siuations are very difficult to assist with in forums, because there can be a lot of stake. The only advice I can give is to restore the database from a clean backup. If you don't have a clean backup, you have a problem. The database may still
be saved, but you need an expert on site to help you, if you have never worked with this before. Advice given in this forum applied haphazardly can result in more damage that you already have.
But, oh, one thing: this type of corruption are always due to hardware errors like bad disks or bad memory sticks. So just restoring the database is not enough. Finding new hardware is important too.
Erland Sommarskog, SQL Server MVP, [email protected]
Actually on the same disk there are other Databases Stored and they work Properly and Backup also can be taken for that Databases. But, for this particular database only this error is happening when iam trying to take backup. But data retrieval and access to
front end application happening as usual. Please help on this.
RehaanKhan. M

Java.io.IOException: Data error (cyclic redundancy check)

Dear everyone,
I have a utility that copys a file, using streams.
It has always worked fine, but I ran into an
exception this morning:
java.io.IOException: Data error (cyclic redundancy check)
from the call:
int bytes = fileInputStream.read(byteBuffer);
Would you know what this exception is about? I
haven't seen that exception after that, though.
So it's a bit puzzling. Any help, or clue towards
solving this problem is appreciated.
Thanks a lot!
George

It's like the data stream is getting messed up...so I would think of a few things:
1) Bad memory?
2) Bad connections?
3) Bad disk?
4) Viruses
Anything that can screw up the data steam.
Other than that....maybe as simple as reinstall the JVM and put new compiled code out there and see if it behaves.

Content-Type is net being set in HTTP header. Server returns 400 Bad Request error.

Hi,
I am trying to access an XML WebService. This service requires the content type of the request to be set to "text/xml". As you can see in the source code, I am setting the req.ContentType property to "text/xml".
However, this content type seems not to be added to the HTTP headers. The server returns a 400 Bad Request error as can be seen in the log.
I've attached a System.Net.trace log and it states:
[Public Key]
Algorithm: RSA
Length: 2048
Key Blob: 30 82 01 0a 02 82 01 01 00 bc 09 30 8a 1e 03 4d 7a ea 16 d3 a8 5e d8 5b 00 c4 8a c5 9f 26 bd 7d d6 cb 8b d0 db bd 93 2d 2b 3b 84 f6 20 79 83 34 67 51 37 21 ea 56 5e 18 d8 a3 db 72 43 0e 14 77 e2 64 cb 07 b6 2a 81 c7 f5 16 dd 19 c7 d9 68 0b 3a 81 5c f0 05 c9 ed 2b 37 00 31 41 37 8b 3a 73 4a 4d ab d7 d8 87 79 35 82 01 97 e3 3c be bb 84 e5 94 bb 87 52 e3 9f b5 fb 3e 33 38 c3 eb 73 42 ee ba 1e c5 4a 33 18 a1 0d 8a d2 10 a8 c5 3....
System.Net Information: 0 : [26780] SecureChannel#31884011 - Remote certificate was verified as valid by the user.
System.Net Information: 0 : [26780] ConnectStream#26966483 - Sending headers
API-VERSION: 1
Host: test.myhost.com
Content-Length: 329
Expect: 100-continue
Connection: Keep-Alive
System.Net Information: 0 : [26780] Connection#3888474 - Received status line: Version=1.1, StatusCode=100, StatusDescription=Continue.
System.Net Information: 0 : [26780] Connection#3888474 - Received headers
System.Net Information: 0 : [26780] Connection#3888474 - Received status line: Version=1.1, StatusCode=400, StatusDescription=Bad Request.
System.Net Information: 0 : [26780] Connection#3888474 - Received headers
0: Content-type
1: text/xml
X-Debug-Token: a810dc
X-Debug-Token-Link: /service/_profiler/a810dc
Connection: keep-alive
Content-Length: 3440
Cache-Control: no-cache
Content-Type: text/html; charset=UTF-8
Date: Tue, 14 Apr 2015 11:07:11 GMT
Server: Apache
...and here's the implementation of the web request:
private void ButtonSend_Click(object sender, EventArgs e)
WebHeaderCollection whCol = new WebHeaderCollection();
whCol.Add("API-VERSION", "1");
//whCol.Add("Content-Type", "text/xml; charset=UTF-8"); <-- That doesn't work in .NET. Content-Type has to be set on the ContentType-Property
string msg = _textBoxReq.Text;
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(_textBoxURL.Text);
byte[] data = Encoding.UTF8.GetBytes(msg);
req.Method = "POST";
req.ContentType = "text/xml; charset=UTF-8";
req.ContentLength = data.Length;
req.Headers = whCol;
req.GetRequestStream().Write(data, 0, data.Length);
string xml = "";
try
using (HttpWebResponse resp = (HttpWebResponse)req.GetResponse())
using (System.IO.StreamReader sr = new System.IO.StreamReader(resp.GetResponseStream()))
xml = sr.ReadToEnd().Trim();
catch (WebException we)
using (System.IO.StreamReader sr = new System.IO.StreamReader(we.Response.GetResponseStream()))
xml = sr.ReadToEnd().Trim();
_textBoxRes.Text = xml;
Can anyone help?
Thanks,
MiRi

Hi _MiRichter,
Well Done!
Thank you very much for sharing the solution to us.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Bad Header error importing Audio from Audition to Premiere Pro

Hey guys,
I'm not sure if anyone is experiencing a problem like this below, but recently, I have been up in arms trying to export a 90-minute feature film's audio (Ch. 1=Dialogue - Ch. 2=M+E - 5.1 Surround Mix) in a .wav file format, and every time I try to export it out, it PLAYS in Quicktime player, but it WON'T import into Premiere Pro (citing BAD HEADER ERROR) in file. I basically tried to utilize every file format there is for audio and such, but nothing is working (including .aif, but it kept cutting out at 13mins into the show). I separated the dialogue music and sfx in 3 submixes, but I needed to combine the Music and Submix into 1 submix to have ONE DIALOGUE Submix, and ONE M+E submix for our distributors. Any help to fix this would be great.

Paul,
Sorry to hear about the PC -> Mac problem. Old 6.5 Mac Project opened fine in CS2 PC, after I added the file extensions.
As for the AVI, Curt is correct. There should be a utility for the Mac, like G-Spot, which will tell you everything about your AVI file. Unfortunatly, I do not know if G-Spot is ported for the Mac (www.headbands.com/gspot), so you might need to find similar for you platform. You can then identify the necessary CODEC and install it.
Last, you should be able to find an edit-shop that has CS3 on PC and get them to Import the old Project, then Export it in CS3, so you can open it on your Mac. If not a commercial shop, then maybe a friend with CS3 on PC? Next best thing might be to find a Mac with Premiere 6/6.5 (last Mac version, prior to CS3 ?) and try that route.
Good luck,
Hunt

HTTP 400 Bad Request Error

Application Express 3.1.1.00.09
We have some users who are experiencing what appears to be a browser problem in one of our APEX applications.
When clicking on any button that does an insert or update to the database some users get an HTTP-400 Bad Request error message. The database does not get updated and anything they click on after that shows that message. In most cases we have been able to restore the user’s browser to the default settings and the issue is resolved. However, we were not able to isolate which browser setting is causing the issue. We have seen the issue in IE 6, IE 7 and IE 8.
Here’s the error we see in the Apache server error log (minus the date time stamp and IP addresses):
mod_plsql: /pls/ax_tastest/wwv_flow.accept HTTP-400 Invalid name
Does anyone else have a solution for this? Know what's causing it?

HTTP 400 Bad Request Error from APEX 3.1.1.00.09.
We were able to determine that only PCs which had the Google toolbar installed were getting the HTTP 400 Bad Request Error from a particular page in one of our applications. Further testing revealed that turning off the ‘auto-fill’ feature of the Google toolbar would prevent the error from occurring and the application would behave normally. We were able to identify a specific item on the page that was the root cause. The item was using the type “Text area with HTML Editor” which has been deprecated. We changed the page item type to “HTML editor standard” and this has resolved the issue with or without the Google Toolbar and auto-fill feature enabled.
Summary:
•     Browser setting: Google toolbar enabled with auto-fill enabled.
Apex page item of type: ‘Text area with HTML Editor’.
When a user clicks on a button in the page, that executes a page process, it results in HTTP 400 error.
•     Browser setting: Google toolbar enabled with auto-fill disabled.
Apex page item of type: ‘Text area with HTML Editor’.
When a user clicks on a button in the page, everything goes through correctly and there is no error.
•     Browser setting: Google toolbar enabled with auto-fill disabled or enabled.
Apex page item of type: ‘HTML Editor Standard’.
When a user clicks on a button in the page, everything goes through correctly and there is no error.

Bad Character Errors after Unicode implementation???

Hi,
Uncode is implemented in BW Development system in my project. While prforming unit testing after implementing the unicode, we faced an issue of bad character in Sort field while loading data for 0VENDOR master data. Till now we used to correct this kind of error in PSA level and reload the data from PSA to Data target in production. I hope, this kind of error should be resolved after implementation of Unicode Conversion project. But, even after implementation of Unicode, we faced this problem.
Can you please confirm me my understanding is correct - after implementation of Unicode, bad character errors will disappear?
Best Regards,
Venkata.

HI again,
I would like to correct my statement above. I did encounter an error during the import phase (ie. import abap) where it stopped at SAPDFACT.
I changed the "err" to "ok" in the tsk file to continue cuz I couldnt find any other alternative working. On browsing other forums I have come to conclude that is the problem for sure.
Can you please help me figure how to resolve the issue please .. ??
thank you!

Quicktime -5402 Bad Data Error

Similar Messages

Maybe you are looking for